AI55/030625/
Calender COMERIO
Quantity: 1, mod. C5pa-A62 – 5 cylinders of which 2 cotton 2 teflon and 1 steel h 1800 mm.- 30 Ton – Steam power supply
AA10/030625/
BETA Padder
Quantity: 1 , Year: 1995, Table width 3400 mm, 3 cylinders dia.450 mm, Differentiated squeezing, 32 T.
AE56/050625/
Babcock Stenter
Quantity: 2, Year: 2019, China origin, Width 240cm, 10 chamber, Steam heated, With center padder, With weft straighner, For knitting fabric, Running condition.
AD26/030625/
Reggiani Stenter
Quantity: 1, Year: 2001, Model TERMA, w.width 3200mm , Gas heated, 15 chambers, Mahlo weftstraightener, Pins & clips chain, Automatic dozing for stenter.
AA23/061023E/CRC-AO/F/
Karl Mayer Rotal Sizing
Quantity: 1, Year: 2008, Creel for 24 beams h 1800 mm – flanges 1000 mm, Double size box model CSB-PW180 – 12 drying cylinder (9 with teflon), Head stock model M2600/100 – h 2600 mm – sizing kitchen complete , Including 24 sizing warp beams. 6x 40” containers needs for the loading.
AE56/280525/
Lafer Raising
Quantity: 1, Year: 2015, Width 220cm, Double drum, 28 rollers, Running conditions.
AE56/260525/
Santex Dryer, Compactor / Ilsung Stenter / Fongs Dyeing Machines
1x Santex Open Width Dryer, Year: 2018, Width 240cm, 6 chamber, steam/oil heated.
1x Santex open width compactor, Year: 2017, 240cm, with pin chain.
1x Ilsung Sun-super stenter, Year: 2010-2015, 190cm, 280cm, 8 or 9 chamber.
1x Fongs HT Dyeing machine for knit fabric, Jumbotec or HSJ, Year: 2010-2013, capicity 30-2400kg.
AB08/220525E/LA-T/F/BJ/
Xetma Vollenweider Shearing and Brushing
Quantity: 1, Year: 2015, Suitable for terry fabrics, TYPE: OPTIMA TSF – 1T, Working width: 2’400mm, Roller width: 2’500mm, Steaming unit, Dust removal
AB55/180525/
Osthoff Singeing
Quantity: 1, Year: 2000, Roller Width 2000mm, Mode: VP99, Desizing, Pre Brushing Unit, Osthoff double burner singeing machine, Babcock impregnation squeezer, Babcock 1 chamber desizing & washing unit.
AD05/241023/
Salvade Steamer
Quantity: 1, Year: 2016, Type VPM 180, Working width 200 cm, Fabric content 180 m., steam consumption 1200 kg/h. max. fabric working speed 80 m./min., loop length min. 1 meter and max. 2.7 meter. Fabric stay time min. 2.5 minutes and max. 50 minutes, installed Power 15 kw.
AA02/150525E/SSL/F/AN/
BRUCKNER Power Frame Tenter
Quantity: 1, Year: 2018, Type Power Frame SFP, Working width 4.200 meter, Roller width 4.400 Meter
Nat Gas Heated, 8 Zones
Pin chain with vertical return type STAR-DUR (SK999), Entry feed 6 meter long
8 drying and heat-setting compartments each 3 meter long
Exit 6.5 meter, Circulating air temp. min. 110℃/max. 210 °C
Av Fabric weight: 30 – 300 g/m²
Min.fabric width: 1.3 meter
Mechanical speed: up to 80 m/min, control range 1:20
SUCHY Padder POWER-PAD, PLEVA Double straightening unit
Transport system POWER-FRAME, Dryer SPLIT-FLOW POWER-FRAME Heating System
MAHLO weft straightener type Gravimat
ECO-HEAT-recovery and ECO-AIR exhaust air cleaning
Process control and visualization system MULTI- CONTROL
with OPTI-HUMIDITY (exhaust air humidity) and
OPTI-HEAT (fabric temperature measurement)
measuring range: 0 – 250 °C
This Tenter Frame has been dismantled and packed by Comp Bruckner with guarantee of completeness guarantee!
Available: Immediately
AC96/140525E/YYL-CL/F/
Menzel Mercerizing and Washing
Quantity: 1, Year: 2018, ww. 3200 mm, No. of total rubber rollers: 18 upper rollers / 16 below rollers, Infeed with pre-washing device, Dewatering mangle, Caustic lye stabilization unit, Lye separation mangle, Neutralisation unit, High performance mangle, 4 washing compartments, High performance dewatering mangle, A-Frame batcher, Overpass rollers.
AD63/090525/
Mario Crosta Brushing
Quantity: 1, Year: 2011, With ceramic brushes, Model: SPT/6, Cylinder width: 2000 mm. Useful working width: 1800 mm. No. 6 ceramic brushes (no need to be rectified and they have an extraordinarily lifespan), Double brushing machine for perfect cleaning of the fabric, Complete dust extraction system dedicated to the machine, Fabric entry and exit in big roll from the same side.
AA10/070525/
BISIO Continuous Decatizing machine
Quantity: 1, Year: 2002, mod.VAPODEC
cylinders table width 1950 mm., working width 1700 mm., decatizing cylinder dia.1270 mm., steam heating, steam 6-8 bars, felt width 1850 mm
AE56/060525/
Lafer Shearing Machine
Quantity: 1, Year: 2018, working width 180cm, double drum, with vacuuming, blade height 17mm, running conditions
AE91/060525E/ALC-AC/M/AO/
Velvet Finishing Line
DISCRIPTION OF OUR HIGH CAPACITY SHEARING MACHINE SYSTEM SISTIG AS
A CONDITION FOR QUALITY SHEARING
The machine is about 30/35m long and is made for velvets of max width 1600mm
A. HEATING IS BY THERMIC OIL BOILER WANSON THERMOPAC, 1163KW – 1988- ON NATURAL GAS
B. FIRST PART : SYSTEM SISTIG – YEAR 1988
1.INCLUDED SYSTEM 1 FOR DUST ASPIRATION ON EACH BRUSHING UNIT
2.J-BOX + ENTRY + PHOTOELECTRIC CELL TO CENTER
3.FOULARD SYSTEM KUSTER
4.PRE-DRYING (heating on thermic oil 0-200°C)
5.UNIT 1
1. HOT PLATE, for revers side fabric and HEATED BY THERMIC OIL + INFRA RED for front side
2. BRUSH
3. HOT PLATE, HEATED BY THERMIC OIL
4. BAT SYSTEM
6.UNIT 2
1. HOT PLATE, for revers side fabric and HEATED BY THERMIC OIL + INFRA RED for front side
2. BRUSH
3. HOT PLATE, HEATED BY THERMIC OIL
4. BAT SYSTEM
7.UNIT 3
1. HOT PLATE, for revers side fabric and HEATED BY THERMIC OIL + INFRA RED for front side
2. BRUSH
3. HOT PLATE, HEATED BY THERMIC OIL
4. BAT SYSTEM
8.UNIT 4
1. HOT PLATE, for revers side fabric and HEATED BY THERMIC OIL + INFRA RED for front side
2. BRUSH
3. HOT PLATE, HEATED BY THERMIC OIL
4. BAT SYSTEM
9.UNIT 5
1. HOT PLATE, for revers side fabric and HEATED BY THERMIC OIL + INFRA RED for front side
2. BRUSH
3. HOT PLATE, HEATED BY THERMIC OIL
4. BAT SYSTEM
C.10 SECOND PART : RACK WITH HORIZONTAL BARS to hang in approx. 400m fabric in relaxed condition (=WAITING-ROOM)
D.THIRD PART : HOLTHAUSEN TYPE DSM -80-2 YEAR 1988
11.INCLUDED SYSTEM 2 : DUST ASPIRATION HOLTHAUSEN FOR UNIT 1
12.ENTRY + PHOTOELECTRIC CELL TO CENTER THE FABRIC
13.UNIT 1 : CYLINDER KNIVE FOR SHEARING
14.UNIT 2 : BRUSH + STEAMING ROLL
15.UNIT 3 : CYLINDER KNIVE FOR SHEARING
16.UNIT 4 : PILE ROTATION AND CYLINDER KNIVE FOR SHEARING
17.INCLUDED SYSTEM 3 : DUST ASPIRATION HOLTHAUSEN FOR UNITS 2 AND 3 AND 4
Note:
Line requires 8×40′ HC Ctrs
Line is stopped on mill floor
AA02/010525D/ALP-AI/F/
Monforts High Efficiency Tenter Frame
Quantity: 1, Year: 2000, Model Montex 9-F TwinAir /Montex 5000, 220cm rolls with / 200cm fabric width, Pin chain, Horizontal return, 9 Zone – Gas burners (set up for gas or change to propane), RA Moore control system, Kuster 4 dip saturator with nip roll, And EVAC Vacuum slot, Ten tone saturator exit nip, Mahlo weft straightener Model FMC 94H, Water cooled stripper rollers and air plenum, Two roll surface winder and plaiter options at exit.
AE56/290425/
Benninger Bleaching Machine
Quantity: 1, Year: 2012, roller width 200cm(ww 180cm), 6 Washing tank, 1 steamer, 5 padder,1 centering, for woven fabrics, running condition
AC70/270425E/CR-Y/F/CX/
FERARRO TUBULAR COMPACTOR
QUANTITY: 1, YEAR: 1994, MODEL: COMPTEX FV1500, KG/WIDTH: 1,5, DESCRIPTION: STEAM HEATED.Machine is stopped in mill floor.
AA23/250425/
Goller Wide Washing & Bruckner Stenter
Year: 2001, 3200 MM WIDTH, LETALY REFURBISHED with energy recovery and dust extraction units.
AE56/220425/
Salvade Steamer
Quantity: 1, Year: 2021, Working width 220cm, Capacity 140 meter, Steam heated.
AC78/210425/
Erbatech Bleaching
AC78/210425/
Bruckner Stenter
Year: 2018-2023, 220 and 240 cm working width, Oil and gas heated, 8-10 chambers.
AA10/220425E/PY-Y/M/
MS Ink Jet Printing
Quantity: 1, Year: 2020, Mod.MS-JP7, Max printing width 1800 mm. Reactives, 8 heads original MS. CURVE Dryer with electric heating, 38 kw installed power. Machine has been cleaned and prepared for shipment from MS Technicians.
AE02/170425/
Reggiani Roraty Printing Machine
Quantity: 1, Year: 2015, Type Unica 185, 12 colours, printing width 1850 mm
AE02/170425/
Goller Washing
Quantity: 1, Year: 2009, Type SINTESA, ww. 2000 mm (roller width 2200 mm), with dosing system, 4 chambers (all by drum and padding – no vacuum), lots of spare parts for knitted fabrics (PA, PES and their blends with Elastan)
AA10/180425E/ARI-L/M/BY/
MS Ink Jet Printing
Quantity: 1, Year: 2018, mod.MS-JP7, Table width 2000 mm., printing working width 1800 mm., at pigments, 8 colors, with Dryer.Machine still connected and running.
AB76/150425/AA/
Bruckner Dryer For Knitwear in Sleeve or Full width
Quantity: 1, ww 2200 mm, complete, connected, working
AA10/140425/
BABCOCK Stenter Frame
Quantity: 1, Year: 1998 about, width 2200 mm., 7 compartments, oil heating, pins chain, BETA Padder 3 cylinders, BIANCO Weftstraightener.
AA10/140425/
SANTA LUCIA Stenter Frame
Quantity: 1, Year: 1995, mod. RED V , working width 2200 mm., 5 compartments, gas heating, 10 motors, 10 burners, vertical pins chain, with BETA Padder 2 cylinders, 1 BIANCO MDC Weftstraightener , exit Rolling system big roll and folding system, fabric capacity 20 m., for knitting fabric.
AE02/140425/AN/
Monforts Stenter Frame
Quantity: 1, Year: 2004, Montex 5000, ww. 2000 mm, 5 chambers, gas heated, horizontal pin chain
AE02/140425/AN/
Bruckner Stenter
Quantity: 2, Year: 1993, ww. 600-1800 mm / 600-2800 mm, 8 chambers, gas heated, Brückner foulard, Mahlo weft straightener, 1x combi chain – 1x horizontal needle pin chain, controller is already modified to S7, cpl. overhauled in 2023.
AE02/140425E/YSP-AP/M/AN/
Bruckner Stenter Frame
Quantity: 1, Year: 2001, ww. 3200 mm, gas heated, new combi chain (pin and clips), new burner
with Goller washing machine, 2 compartments, entry with Bianco and Dogal, 2 Küsters foulard, rapport measuring device (2 Pleva systems with camera), Scheuchel heat recovery system (2015)
new burners, new chain, new entry control (both sides), SPS and electronic cpl. new for stenter and washing machine
6 chambers, The washing machine is in front of stenter, production: curtains and other wefts, stopped a few months back
AE02/140425E/AAL-AI/M/AN/
Monfrots Stenter Frame Montex 5000
Quantity: 1, Year: 2002, ww. 1800 mm, 3 chambers. Gas heated, combi chain (clamps and pins), Binco weft straightener
AC09/110425/
Krantz Dryer
Quantity: 1, Year: 2000, Model: S184, Roller width – 2600 Mm, Working width – 2400 Mm, Heating source – Gas, No of chambers – 4, Singel Kuster padder, Bianco weft straightener.
AC09/110425/
Monti Antonio Calendar for Thermoprinting
Quantity: 1, Year: 2016, Model: 900-2000IP, Fabric maximum width – 1800 Mm, Felt width – 2000 Mm, Electrical heating.
AD26/120425/
Sperotto Rimar Discontinuous Decatizing
AD26/120425/
Bisio Discontinuous Decatizing Machine
AD26/120425/
Sperotto Rimar Continuous Decatizing
AD26/120425/
Mario Crosta Raising
QUANTITY: 1, YEAR: 1986, 24 CYLINDER GARZA, COMPATIBLE WITH TRIMMING/BRUSHING MACHINE, TYPE: MC60/24, WORKING WIDTH: 1800 mm.