AI60/010825D/CL-L/F/
MARIO CROSTA RAISING MACHINE
Quantıty: 3, Year:2000, Model: MC10/24, For knitted and woven fabric, Ww:2000 mm x 24 Raising Rollers
Driving Fabric Inlet Roll, Scroll Openning Rolls, Driving Faric Outle Roll with Plaiter, Inverter Controlled, J Box
AI60/010825D/ACC-AC/F/
BRUCKNER STENTER FOR WOVEN
QUANTITY: 1, YEAR: 1992, WORKING WIDTH 1800MM , 10 CHAMBERS GAS AND STEAM HEATED:
NON STOP ENTRANCE WITH J SCRAY AND DOGAL SPREADERS INSTALLED IN 2000, RAMISCH KLEINWEFERS DYEING PADDER MODEL BICOFLEX, WITH 4 ADDING TANKS WITH MIXER,MAHLO ORTHOMAT WEFT STRAIGHTENER TYPE RFMC-94H WITH 4 OPTICS, BRUCKNER STENTER FOR WOVEN 10 CHAMBERS DUAL GAZ AND STEAM HEATED , WORKING WITH:1800 MM, HORIZANTAL PIN CHAIN
ENTRANCE WITH UNCURLERS AND OVERFEEDİNG SYSTEM,EXIT WITH COOLING ZONE, 3 COOLING CYLINDERS, EXIT WITH PLEVA HUMIDITY DETECTOR , DOUBLE A FRAME BATCHER AND FOLDER. YEAR: 1992, MACHINE EQUIPPED WITH: AUTOMATIC CHAIN WIDTH REGULATION, ROTATIVE SELF CLEANING FILTERS, AUTOMATIC NOZZLE BLOCKAGE WHEN STOPPING THE MACHINE, PLEVA RESIDUAL MOISTURE MEASURING DEVICE
THE BRUCKNER STENTER STOPPED
AE02/300725/AN/
Bruckner Stenter Frame HNB-SFP-34/2-976
Quantity: 1 , Year: 2011, ww. 3400 mm, gas heated, 2 chambers (prepared for 3rd chamber), Suchy foulard (WOB 3600 mm), cooling unit, fully automatic Suchy cutting system , (complete overhauled in 2023)
Tmachine is in top condition. The machine is designed for reinforced production and the stenter frame is for finishing and assembling the mesh. Basically 2 different reinforced grids (in roll or sheet format) can be produced: 2-dimensional and 3-dimensional.
AB46/300725/
Krantz Dry Line/Tenter
Quantity: 1, Year: 1990, Krantz 4m max width, Clip chain, 4 zone, Gas heated
AF74/290725/
FERRARO OPEN WIDTH COMPACTOR
Quantity: 1, Year: 2007, Model: Comptex-RE-2500, Lenght of chain: 9m
Kenar tutucular: Erhardt+Leimer Elspreader, Side cutters: N/A, Felt unit: Serteks (2016), Felt heating cylinders: 2 pieces diam. 600mm
Condition of chain and felt: Almost New!, Moisturizing unit: Serteks (2016 model), Inspection and rolling unit: Serteks (2016), Panel: Originally Ferraro
AD92/280725/
Bruckner Stenter
Quantity: 1, Year: 1998, w.w. 2.40 m, 6 chambers, Vertical chain, thermal oil, padder, ortomat, manual weftstraightener, exit by folder and small roll.
AB52/180725/
Benninger ZELL BENSIZETEC Sizing
Quantity: 1, Year: 2006, BEN-SIZETEC Compact model, Delivery Working width up to : 240cm with max beam dia 1000 mm, 8 drum Dryer with a diameter of 800 mm, Beaming speed 0.4 bis 125 m/min , 2 Single size box with 2 Immersion rollers (double dip and double nip with 2 Lower rollers and 2 Squeeze rollers), Max Sizing bath width : 220 cm, Complete kitchen for sizing liquid , Beam to Beam type, FANTASTIC CONDITION.
AD26/030425E/ATS-AY/F/AQ/
Monforts Stenter
QUANTITY: 1, YEAR: 2005, Model MONTEX 6000 7F, WORKING WIDTH MAX 200 CM, 7 CHAMBERS, DIRECT GAS HEATED, ORIZONTAL CHAIN WITH PlNS, 2 EXTRACTORS, POWER 160 KW, TERMIC POWER 2275, SPEED 5-100 M/MIN.
DIMENSION OF THE MACHINE: LENGHT:36 MT, WIDTH: 4,50 MT, HEIGHT: 4,00 MT.
MACHINE SUITABLE FOR WOVEN FABRICS, RUNNING IN THE MILL FLOOR.
Loaded into 5/6 container 40′.
AC93/090725/
Monti Transfer Printing
Quantity: 1, Year 2006, Roller Width 2000 mm, MODEL 901-2000. WORKING WIDTH 1.800 MM, ELECTRIC HEATED, CYLINDER DIAMETER 500 MM.
AA10/080725/
BIANCALANI AIRO 24
Quantity: 1, Year: 2007, working width 1800 mm., ejector channel 1800 x 5700 mm, gas heating, brake bar on entry, exit pendulum folding system, expanders, centring device with slats, loading cells in input and exit, Inverter
AE56/070725/
Monfongs Stenter
Quantity: 1, Year: 2017, width 220cm, oil heated, 9 chamber, can test running
AC44/020625E/LRL-CL/F/AQ/
Unitech Stenter
Quantity: 1, Year: 2022, WW: 340 cm, Model: RED EVO, Doubleflow“ 8K /DF 340 GAS, No of Chambers: 8, Heating medium: Gas
AC93/040725/
ARTOS BABCOCK STENTER
QUANTITY: 1, WORKING WIDTH 3.200 MM, CHAMBER ECON-AIR INSTALLED NEW IN 2004, 4 CHAMBERS GAS HEATED
WORKING WIDTH 3.200 MM, HORIZONTAL PIN AND CLIP CHAIN, MAXON BURNERS, J-SCRAY ACUMULATOR, PADDER, MAHLO WEFT STRAIGNER RFMC 10-A, YEAR 2001, SIEMENS AND KEB INVERTERS, EXIT BY FOLFER
AB08/090525E/AAL-CI/F/BJ/
Bruckner Stenter
Quantity: 1, Year: 2007, TYPE: VN-SFP 32/4-999N-D, Very suitable for terry fabrics, Working width: min 600mm – max 3’200mm, No of chambers: 4, Chain type: vertical pin, Type of tensioning chain: SK 999, Fabric speed: up to 60m / min, Entry compartment: 3’000mm, Exit compartment: 2’500mm, Ventilation system: split flow, Heating: Steam, Steam Heated, Entry Guiders, without weft straightener, winder, padders , Requires 5 Ctrs for shipment. Status: recently stopped.
AC06/020725/AQ/
Cimi Open Width Washing
Quantity: 1, Year: 1998, MOD. LAVANOVA TYPE TAV-2000.
Composed of:
High Entry with CORINO Brushing unit, CORINO Centering unit Type K20, Nº 146/98.
Year 1998 with Two spanders rollers and Fluo centerer.
Heat exchanger. NO. 5 boxes with padder.
Drums dryers 4 + 4 Teflon Coated, Diameter 800 mm.
Exit by Folder with fast change for 2 trolleys.
AC06/020725E/AIA-T/M/AQ/
Bruckner Stenter
Quantity: 1, Year: 1997, Working width 180 cm, Entry jbox, With Bianco optical weftstreightner, No padder, 8 chambers, pin chain , gas heated, inverter type, exit jbox, ispecting table or batcher.Stopped in warehouse
AE30/010725D/YY-AI/F/BA/
Zimmer Printing
Quantity: 2, Year: 2014, Model: Colaris, Printing width: 2600mm, No of color: 8.
AA10/010725/
Stormac Printing
Quantity: 1, Year: 2016, Type RD8, 8 colours, Working width 1800, Printing repeat 64 cm, 2-zone dryer, gas heating, output on Batcher year 2016.
AE39/300626E/YL/F/
MCS Continuos Washing Machine
Quantity: 1, Year: full reaconditioned in 2018
Type Star Wash, , working width 1800 mm, 3 washing boxes with double perforated drum with intermediate padder + 1 small impregnation box with padder, 4 cylinders drum dryer, exit A-frame. New electrical panel, motors, inverters, programmer.
washing textile machine in very good condition
AA23/280625/AZ/
BRUCKNER STENTER
Quantity: 1, Year: 2004 – 2015, 320 CM ; 6 CHAMBERS , NEEDLE CLAMP CHAIN, GAS, Composition: Goller washing 320 cm; Kusters Foulard, 2x PLEVA centering, Eco heat recovery, filter
AE56/130625/BA/
Babcock Stenter
Quantity: 1, Year: 2022, China origin, width 240cm(220cm ww), 10 chamber
oil heated, Siemens PLC,inverter & motor, with EL center padder, without weft straighner, horizontal chain, for knitted fabric
AA23/280625E/AOL-CI/F/AZ/
Kiener Lacom Hotmelt Coating & Laminating Machine
Model MBL 2400-ECO
Manufactured by KIENER Co, Germany
Machine is little used and is like new condition on mill floor.
Year: 2016
Working width 2400 mm
Working speed 3-40 m/min
Adhesive types: thermoplastic and reactive hotmelts
Application weights S- 40g/sqm with engraving roller; S -500 g/sqm full surface infinitely adjustable
Application temperature – 50-220 oC
Application techniques : MRBL – multi roll : MPBL – multi purpose
Viscosities : 2000 – 80000 Mpas
Heating – thermal oil.
Additional hoist crane installed for full beams loading/unloading
Low working hours –
AA23/280625/
Salvade Ager UPM 250s
Quantity: 1, Year: 2019, 220 CM ; 250 M CONT. Same side feed and delivery.
AA10/250625E/RC-R/F/AQ/
BIELLA SHRUNK PROCESS Continuous Decatizing machine
Quantity: 1, Year: 1998, mod. THERMO DUPLEX 90 , w.width 1800 mm
AA10/170625/
Osthoff Singeing & Desizing
Quantity: 1, Year: 1991, mod.U80, Width 3200 mm., With impregnation vat.
AA10/170625/
Reggiani Digital Printing INK-JET
Quantity: 2, Year: 2021, mod. RENOIR-POWER, Width 3400 mm., 32 heads, 8 colours.
1x reactive colours – 1x pigment colours
AA23/170625/AZ/
M-TEC Line For High Pile Knitted Fabrics
Quantity: 1, Year: 1998, 180cm,shearing, coating, polishing
AB46/190625/
Lafer Raising
Quantity: 1, Year Model-(1997/99), Model GRi – 90 Duplex, 2100 mm working width.
AC93/110625/
Saben Stenter for Knit
Quantity: 1, Year: 1999, ROLLER WIDTH 2.600 MM, LONG ENTRANCE FOR KNITS, WITH STEAMER SECTION, VERTICAL PIN CHAIN, 7 CAMBERS, GAS HEATED (4 of them added in 2006), BETA 3 CYLINDER PADDER, MAHLO ORTHOMAT WEFT STRAIGHTENER, EXIT WITH J-SCRAY, INSPECTION AND FOLDER.
AI55/030625/
Calender COMERIO
Quantity: 1, mod. C5pa-A62 – 5 cylinders of which 2 cotton 2 teflon and 1 steel h 1800 mm.- 30 Ton – Steam power supply
AA10/030625/
BETA Padder
Quantity: 1 , Year: 1995, Table width 3400 mm, 3 cylinders dia.450 mm, Differentiated squeezing, 32 T.
AE56/050625/
Babcock Stenter
Quantity: 2, Year: 2019, China origin, Width 240cm, 10 chamber, Steam heated, With center padder, With weft straighner, For knitting fabric, Running condition.
AD26/030625/
Reggiani Stenter
Quantity: 1, Year: 2001, Model TERMA, w.width 3200mm , Gas heated, 15 chambers, Mahlo weftstraightener, Pins & clips chain, Automatic dozing for stenter.
AA23/061023E/CRC-AO/F/
Karl Mayer Rotal Sizing
Quantity: 1, Year: 2008, Creel for 24 beams h 1800 mm – flanges 1000 mm, Double size box model CSB-PW180 – 12 drying cylinder (9 with teflon), Head stock model M2600/100 – h 2600 mm – sizing kitchen complete , Including 24 sizing warp beams. 6x 40” containers needs for the loading.
AE56/280525/
Lafer Raising
Quantity: 1, Year: 2015, Width 220cm, Double drum, 28 rollers, Running conditions.
AE56/260525/
Santex Dryer, Compactor / Ilsung Stenter / Fongs Dyeing Machines
1x Santex Open Width Dryer, Year: 2018, Width 240cm, 6 chamber, steam/oil heated.
1x Santex open width compactor, Year: 2017, 240cm, with pin chain.
1x Ilsung Sun-super stenter, Year: 2010-2015, 190cm, 280cm, 8 or 9 chamber.
1x Fongs HT Dyeing machine for knit fabric, Jumbotec or HSJ, Year: 2010-2013, capicity 30-2400kg.