AE56/251225D/AOS-AY/F/BA/
Bruckner Stenter
Quantity: 1, Year: 2010, Germany origin, Roller width 240cm 8chamber, Oil Heated, 1 Padder, Pin Chain, With Heat Recovery System, Running Condition.
AC93/231225E/PA-T/F/
MONFORTS SANFOR MODEL MONFORTEX BJ
Quantity: 1, Year: 1994, WORKING WIDTH: 2.400 MM, ROLLER WIDTH: 2.600 MM, RUBBER WIDTH: 2.525 MM
EQUIPPED WITH:- STEAMING CYLINDE- WEKO SPRAY- PUMP STENTER CLIP HORIZONTAL CHAIN- RUBBER BELT UNIT- PALMER DIAMETER 1.500 MM, FELT AND DRYING CYLINDER- EXIT WITH COOLING CYLINDER, ONTO FOLDER AND A-FRAME BATCHER
AG96/221225D/ACC-AL/F/AG/
Monforst Sanforizing
Quantity: 1, Year: 1988, Made in Germany, WW 1900 mm. Electronic upgraded with all motors with individual inverters. and electrical systems of the machine all upgraded. WEKO humidifier, small mini stenter entrance, Palmer with Dolphus Muller, cooler cylinder, folding exit.
Electricity 220/380v or 440. Stopped on Mill Floor. Very High quality Machine.
We recommend to change the Sanfor Belt during installation. USD 10,000 is a Daytex best quality new Sanfor Belt. We can supply licensed professional technician for installation, start up against extra cost.
AG96/221225D/AOP-CI/F/AG/
Tepa Stenter Sanforizing
Quantity: 1, Year: 2008, 2000mm, Very little used, stopped since 2019 with weko system. We recommend to change the Sanfor Belt during installation. USD 10,000 is a Daytex best quality new Sanfor Belt. We can supply licensed professional technician for installation, start up against extra cost. Very High quality Machine.
AA30/181225/AX/
Villars Powder Coating
Villars Powder Coating PPM94 with Chiller,Jenko Powder feed
Engraved roller to apply dot coating
Infra red melt process
Cavitex 2 roller Calibrating Calendar
Hall & Boyden Shrinking roll
Knock brush and extraction unit
NDC Coating Level Scanner
Batching to A frame
Extraction unit
Heizemat Oil Boiler
AA30/181225/AX/
Caratsch Scatter Coating with Laminating Line
1800mm, A frame feed, Villars Scatter coater, Infra red pre heat, Caratasch infra red melt process, Calendar rolls stainless steel with water cooling, 2 Cooling cylinders, Batchng to A frame, Secondary A frame Laminating feed, 3 stage processing for coating both sides and lamination, Oil Boiler.
AA02/171225E/RTL-AL/M/
Bruckner Tenter Frame
Quantity: 1, Year: 2016, Model V/N SP-22/08, 2.2 Meters Working Width, 08 Zone, Vertical Chain Return, Gas Powered, Bruckner Power Pad, Pleva SP-1 Weft Straightener.
AI82/101225E/RY-Y/M/BX/
Lafer Shearing
Quantity: 1, Year: 2015 but Only 8’735 working hours, Model CMI200, Number of Shearing heads: 2 heads per machine., Working width: 200 cm, Status: Stopped since Oct 2025 but still in its working position and connected to power. So it can run at any time for inspection and trials.
AB51/101225E/AIP-P/M/AQ/
Lafer Shearing
Quantity: 2, Year: 2008, Model CMI 100, Table width 2200 mm, Coupled to work Front/Front side of the fabric, In very nice conditions, few working hours.
AE56/091225/
Monfongs Stenter
Quantity: 1, Year: 2019, Width 240cm, 9 chamber, Gas heated, Center padder, Horizontal chain, Running conditions.
AA10/051225/
Guarneri Embossing Calender
Quantity: 1, mod.KREWSAG, for Chintz & embossing, embossing Cylinder width 1600 mm, diathermic oil heating, pressure 25.000 kg, 3 Cylinders, exit LA MECCANICA Rolling up System.
AA10/051225/
Lamperti Raising
Quantity: 1, Year: 1995, mod. GHM/L93, w.width 2850 mm, 2 drums 24+24 cylinders, suitable for tubular knitting fabric.
AA10/051225/
Lamperti Sueding
Quantity: 1, Year: 2001, Model SMB, Brushes width 2400 mm. 3 vertical brushes, input from trolley, output folding system, without suction.
AA10/041225E/LY-Y/C/
Lafer Brushing
Quantity: 1, Year: 2002, mod.ULTRASOFT, Table width 2000 mm., 6 carbon brushes.
*AB52/021225/
Babcock Stenter with Coating Head
Quantity: 1, Year: 1997, 240 cm working width, Flat stenter with enduction head Jacob Weib & Söhne – Type 5001-3500, Machines in operation.
AD26/030625/
Arioli Steamer + Small Arioli for Samples
Quantity: 1, Year 2005, Width: 3200 mm, Type: VAPO2003, Capacity: 200 m, Speed: 15 m/min.
AB76/281125E/LC-L/F/BY/
Tumbler BIANCALANI AIRO DUE S
Quantity: 1, Year: 2001, Type AS2XGAE, Gas heating, 2 ropes, 2chambers, Capacity: 300 kg, Max temp. up to 200oC, Rollers for dragging fabrics, Processed fabrics: knit fabrics polyester, cotton, cotton with Lycra, For softening, various typed of knit fabrics, Machine in very good technical condition, running.
AB52/170125/
Finishing Plant for Worsted and Woollen
1x Singeing machine from PAREX MATHER ; Type: SERIES 5000 MARKS SINGEING MACHINE; Year: 1997; with pre-brushing station; Flamming station; impregnation padder; Dawn suction system; Cabinet with programmable controller.
1x Solvent Washer (Solvent Machine) from SPEROTTO RIMAR NOVA 220/1000; Year: 1996; with CORINO fabric feeding; Solvent washing system; Drum dryer; Folding system; Electric cabinet; Solvent recovering system ; Programmable controller.
1x Continious WASHING machine from CIMI; CORINO feeding; 04 Washing Compartments; Width 2000 mm; Capacity: 133 to 220 litres; LAVANOVA product tanks; SUPERFIX rinse compartment; THERMOMECANICCA RAIMOND 8-drum steam drying system; Folder delivery; 2 Electrical control cabinets with automaton.
1x Washing-Fulling machine TURBO MAT 2C 4M; Year: 1991; Capacity: 350 Kg; Width: 1,000 mm; With fulling system for wool; Washing system; Balance wheel; Compressed air, Steam water regulation system; Pressure regulation switch; Electrical cabinets.
1x quick washer from MAT; Type SUPER VELOX N°1 model; Year: 1993; Washing system; Electrical control cabinet; Programmable automaton.
2x Washers / Fullers from HEMMER; Capacity: 150 Kg; Capacity: 100 Kg; With pressure roller; 01 Fulling system; Water, air, steam; Timer regulation system.
2x washing / Fullers from ZONCO; Model: NEW COM 600 BIG; Year: 1987; with fulling system; Washing system; Balancer; Compressed air, water and steam regulation system; Timer regulation system, pressure switch; Electrical cabinet.
1x Washing machine from BIANCALANI TM; Type : AIRO 1000; 2 ropes ; Year: 1992
1x BIANCO Unstwisting machine (LINEA APRICORDA); Width : 2200 mm ; Year: 1992; With centering device.
1x NESI AND PUGI end-to-end selvedge seam machine; Width: 2000 mm; With Jockey-roller feeding and widener; Edge guide; Folder; Sewing machine; Output balancer.
1x Impregnation Padder from MCS ; Year: 1990; Width: 1800 mm ; With ERHARDT LEIMER entry system; Impregnation tank; 2 automatic filling tanks of 1000 liters each; Winding system; Electrical control and protection cabinet.
2x ELCU fabric sewing machines; Type: AA 2000 ; Year: 2007.
2x Multi Layers STENTER FRAMES from BRUCKNER, Width: 2400 mm ; Year: 2003/2005.
Each Stenter with 6 compartments; Thermic Oil Heating; BETA impregnation padders with 3 cylinders; MAHLO Weft straightener; pin and clip chain ; Folding delivery.
1x Raising and napping machine from LAMPERTI; Width: 1800 mm; type: GA/ L80; Year: 1986
1x Raising and napping machine from LAMPERTI; Width: 1800 mm; Type: GB048N/L89; Year: 1992 ; with 36 workers; Système de tondage à scie ; Automatic suction system ; Automate programmable.
1x Emerising machine from LAFER (TEXEN FACTORY AUTOMATION), Type: CARBONIUM ULTRASOFTY; Power: 25 KA; Width: 2000 mm ; 4 brush (peach effect), Year: 2011.
1x Shearing line from LAFER; Type: CMI2; Width: 2200 mm ; Year: 1997; composed with 3 Shearing machines of 2 cylinders each; Programmable controller; Suction system ; folding delivery.
1x Decatizer from BIELLA SHRUK PROCESS (KD); Type: KD SUPREMA 90 6R with Decatizing autoclave Type: MI 20367-94; Width: 1600 mm ; Year: 1994; Capacity: 6180 liters; Pressure: 4 Bars.
1x Decatizer from TMT type PF 1293 MULTI PROGRAM; Width: 1600 mm ; with decatizing autoclave; Year: 1996 and completely refurbished in 2021 ; Steam heating ; pressure : 4 bars.
1x Sanfor from SPEROTTO RIMAR / SANTEX GROUP COM; type: FLEXA COMPACT 180; Width: 1600 mm ; Year: 2005; With electrical cabinet and programmable controller; Jbox Feeding; Roller fabric tension system; Compression system; Calendering zone; Cooling system; Folder.
1x Decatising machine from SPEROTTO RIMAR ; Type: DECOFAST 3,5 ; Width: 1800 mm ; ULTRAFINISH ; Year: 2016 ; Power: 55 kW; With roller Feeding; Roller fabric tension system; SPEROTTO RIMAR SIMATIC-HMI programmable controller and SIEMENS screen; 2-roller decatising system; Electrical control cabinet.
Others :
1x ZANCO Fuller with 4 ropes (lavensel) Type : NEWCOM 600 BIG. Year : 1981.
2x THIES dyeing sampling machines
1x Untwisting machine from CORINO
1x J BOX inspection table with unbatcher and folder.
11x Overlock sewing machines and simple sewing machines
1x THIMONNIER sewing machine; Type: SAC-UP; Year: 2007.
3x Inspecting tables with Inverters; Mechanical counters
300 Foldable trolleys (Easles)
… and various accessories …
AC93/251125/
Bruckner Stenter
Quantity: 1, Year : 1997, Roller Width : 2000 mm, Bays : 8, Type of Chain : Horizontal, Type of Heating : Gas, Used textile machine : Yes.
AC93/251125/
Bruckner Stenter
Quantity: 1, Year : 1998, Roller Width : 2000 mm, Bays : 8, Type of Chain : Vertical, Type of Heating : Gas, Used textile machine : Yes.
AC93/251125/
Unitech Stenter
Quantity: 1, Year: 2015, Roller Width: 2400 mm, Bays: 10, Type of Chain: Vertical, Working width: 2200 mm, Type of Heating: Gas, Used textile machine: Yes.
AB86/270925/
PAD STEAM EFI REGGIANI BLEACHING LINE
Quantity: 1 , Year: 2020, Table width 2000 mm, Maximum working width 1800 mm
Minimum working width 900 mm, Fabric composition: 100% cotton, Fabric weight: 80 to 250 GSM g/m2
Fine mechanical speed: 40 m/min, Production speed: 25 – 60 m/min, Voltage: 400 V AC +/- 10%, 50 Hz +/- 2%, Installed power: 73 kW, Pressure steam: 5.5 – 6 bar
Pressure compressed air: 6-7 bar, Compressed air consumption: 1.5 Nm3/hr, Pressure wash water: 2 – 3 bar, Water consumption: 6 – 8 lt/kg of fabric, Machine in Excellent condition
AA10/241125/
Lamperti Raising
Quantity: 1, Year: 1994, mod.GHM/L 93, Width 2200 mm. , 2 drums 24+24 cylinders, 3 wideners for each drum, Input and output on folding system on opposite sides, Inverter, Suitable for knitting fabric.
AE02/241125/
Goller Complexa Bleaching Line
Quantity: 1, Year: 2013, ww. 2400 mm (roller width 2600 mm), for open width knitted fabrics.
AD63/150925/
BIELLA SHRUNK PROCESS NANOMIX Steaming Machine
Quantity: 1, Year: 2011, Model: NANOMIX, Roller width: 2.000 mm
Working width: 1.800 mm,, Fabric entry with fabric braking device
Towing group with J-Box brand CORINO
Double motorized spreader and CORINO brand slatted centering device, Vaporize NANOMIX
Hot & Humid technology, Fabric exits in plate
This machine model is still produced by BIELLA SHRUNK PROCESS company
Machine process description:
NANOMIX is a compact low consumption steaming and shrinking machine which is based on an original working principle, where steam, water and air are mixed inside a newly designed steaming tunnel (patented). NANOMIX assures an optimal fabric relaxing with high shrinkage results to grant an ideal dimensional stability, it also achieves duller and softer effects which make this new machine the right choice both for the fabric producers and for the confection companies. With the exclusive “hot & Humid” system, the treated fabric shows a moisture regain increase instead of the typical over-drying, which takes place in traditional machines.
AF74/241125E/RAI-AL/M/AS/
Monfongs Sanforizing
Quantity: 1, Year: 2016, Type: Monfortex 8000, Cylinder width: 2000mm, Working width: 1800mm, Mini stenter/chain: N/A, Palmer unit diam.: 2500mm.Stopped
*AA27/221125/
Jaeggli Hanks Mercerizing
Quantity: 1
Year: 2000
Model: HL2000
Width: 1550 mm
Working Width: 1370 mm
Mercerizing machine for hanks of 54 “(rough reeling yarn), Model HL2000
-System compost from 2 separate compartments for the treatment of hanks in caustic soda, and two separated mobile compartments for washing.
-Electronic control of the position of the hooks and force, maximum capacity of 70ton
-Use up to 10 hooks of 1 kg. for total 10kg yarn for each work cycle.
– work cycle single mercerization, or double mercerization.
-Inputs for 3 wash water, three discharges separate, input to a caustic soda, pneumatically controlled.
– Each machine produces about 100 kg/h of hanks yarn 1Kg/cad. for a total of 800Kg to turn.
– 2 automatic loaders for hanks
– Hydraulic system 11Kw with control from, oil cooling system with water, hydraulic movements at variable flow control, with 4 hydraulic cylinders controlled in position encoders.
-Electrical panel with two doors with electronic PLC and Workstation control data work programs residents and selectable. Framework to a pneumatic door.
Construction year end 1999.
– A mixing plant for the preparation of caustic soda mercerization hanks, construction Switzerland manufactured by Merc-Control ag Kasag; model “Eco-Block”. Complete installation of the heat exchanger and circulation pump for the cooling of caustic soda, pneumatic control of the concentration with scale values Baume, suitable for work with two mercerizing. Construction year end 1999.
– A system for the separation of impurities present in the washing solution, such as spinning oils, wetting agents dispersed in the bathroom of lye, pectins and sugars derived from treated cellulose during mercerization. Manufactured by Merc-Control a.g. Kasag; model “Separator OAS.” Construction year end 1999.
*AA27/221125/
Jaeggli Hanks Mercerizing
Quantity: 1
Year: 2000
Model: HL2000
Width: 1550 mm
Working Width: 1370 mm
Mercerizing machine for hanks of 54 “(rough reeling yarn), Model HL2000
– Two compartments with caustic soda and two compartments for wash water collection
– The machine produce about 100 kg / h of yarn skeins 1Kg/cad. for a total of 800Kg. per shift.
– Autoloaders
– Hydraulic system shot with variable flow control, with 4 pistons firing control with encoder
– Yarn type: cotton & all cellulosics fibers
– Nominal hanks size: 1370 mm
– Hanks size: 1180/1510 mm
– Max. loading capacity: 12 kg/cycle
– Electronic control of the position of the hooks and force, maximum capacity of 70ton
– Use up to 10 hooks of 1 kg. for total 10kg yarn for each work cycle.
– Work cycle single mercerization, or double mercerization.
– Inputs for 3 wash water, three discharges separate, input to a caustic soda, pneumatically controlled.
– 2 automatic loaders for hanks
– Hydraulic system 11Kw with control from, oil cooling system with water, hydraulic movements at variable flow control, with 4 hydraulic cylinders controlled in position encoders.
– Electrical panel with two doors with electronic PLC and Workstation control data work programs residents and selectable. Framework to a pneumatic door. Construction year end 1999.
– A mixing plant for the preparation of caustic soda mercerization hanks, construction Switzerland manufactured by Merc-Control ag Kasag; model “Eco-Block”. Complete installation of the heat exchanger and circulation pump for the cooling of caustic soda, pneumatic control of the concentration with scale values Baume, suitable for work with two mercerizing. Construction year end 1999.
– A system for the separation of impurities present in the washing solution, such as spinning oils, wetting agents dispersed in the bathroom of lye, pectins and sugars derived from treated cellulose during mercerization. Manufactured by Merc-Control a.g. Kasag; model “Separator OAS.” Construction year end 1999.
AC06/020725/AQ/
Reggiani Flat Printing
Quantity: 1, Year: 2001, Type: PRIMA, Model: 180/24/10, Working Width: 1800mm, 10 Colors, Printing Table: 24m, 4 Chamber Gas Heated Dryer with Weishaupt Burners. 380v 50hz, Siemens PLC and Electronics.
AB55/050824/AQ/
Reggiani Rotary Printing
Quantity: 1, Year: 2000, Type: Unica, Model: 180/15/110, Working Width: 1800mm, 15 Color Bed / 10 Installed, Testa Entry, Mahlo Weft Straightener, Kalin Brushing Unit, 6 Chamber Gas Dryer, Type JDK, Model 180/6/G, Exit With Plaiter.
AE21/191125/
Bruckner Knitting Dryer
Quantity: 1, Year: 2004 – changed in 2005/2006, Perforated mat, Model or – sf – 24/3 – 0, Max width: 2,50 mt.
AB45/191125/
Biella Continious Steaming Shrinking Machine
Quantity: 1, Year: 2002, model Ecovap 95
Cylinder width 1900 mm
Machine with Igrofast system and carbon brush builded in.
Igrofast drastically reduce used steam quantity
Vibro shrunk with humidifier ECOVAP KD
Suction and fans (ventilators) included
AD81/131125/
Officina Master SP Fabric Brushing Unit
Quantity: 3, Year: 2015/2018, WW: 2000 mm, Complete with exhaust fan.Explanation of the functioning:
Two roller sets above each other are cleaning the fabric. The roller width is 2200 mm.
Each set of rollers has 2 rollers: 1 beating roller (vain roller) and a brushing roller.
Both rollers are covered for the suction/exhaust system.
The “touch” of the roller to the fabric can be adjusted by a hand wheel.
The large fan is exhausting the pollution (dust, treads, etc.) from the roller sets.
The drives are with a frequency inverter.
AC44/141125/AQ/
Reggiani Renoir Rotary Printing Machine
Quantity: 1, Year: 1991
No. Of colors installed: 12
No of colors possible to install: 15
Max. Printing width: 3.200 mm
Color application system: Magnet system
Dryer heated with: Gas
Electrical tension: 3 x 380 V 50 Hz
Color feeding side : Left
Operating side: right
Glue application: Hydrosoluble
This machine is composed of:
Tensionless Fabric entry from La Mechanic you 2001
Vakuum suction nozzle
Lattiche roller
Printing table for max 15 Colors but 12 installed
Repeat installed: 642 mm
Endring fitting system: Reggiani
Printing blanket in excellent conditions
Pneumatic color feeding pumps
Dryer in upper position,
No of chambers: 6, each 3 meter length
No. Of passages : 3
Exit with nonstop Batching Arms
12 Color pipes for max printing width
Also included: 1 Color pipe washing machine for 8 pipes.
The machine is stopped on Mill Floor.
AA02/101125/
TERRY WEAVE PLANT
WARPING
1 KARL MAYER DIRECT WARPER
Year: 2018
Model Warp Direct 2400/1250
With
1 KARL MAYER VEE CREEL
Year: 2018
Model Creel
650 Running ends
1 TANGSHI CONE TO CONE RE-WINDER
Year: 2018
60 positions Double sided 30 positions each side
SLASHER SIZING
1 KARL MAYER SIZING MACHINE
Year: 2018
Model Pro-Size
3.8 meter maximum Warp width
BEAM HANDLING
2 WUXI XJANDA BEAM STORAGE RACKS
Year: 2018
16 WUXI XJANDA BEAM TRANSPORT TRUCKS
Year: 2018
WEAVING
24 TOYOTA AIR JET TERRY LOOMS
Year: 2018
Model JAT810
Type JA4T-280DE-EH-T810
280cm weaving width
4 color, Staubli dobby Model S3222 e3 DRC
1 LUWA OVRERHEAD TRAVELLING CLEANING SYSTEM
Year: 2018
4 Blower Heads
Each With Tracking covering 6 Looms 280cm
1 GROZ-BECKEART WARP TYING HEAD
Year: 2018
Model Knot Master
72 SPARE PILE BEAMS
48 SPARE GROUND BEAMS
90 SPARE NEW LIFE HARNESS FRAMES
72 TOYOTA LOOMS WEAVING CLOTH ROLLS
AC44/071125E/OL-O.L/M/AQ/
Reggiani Stenter
Quantity: 1, Year: 2002, Working width max. 3200 mm, Heating : Gas, No of chamber: 8.
Entry with 1 Padder BETA 3 Bowl, 1 Padder Küsters, 1 Weftstraightener Mahlo, Entry field with horizontal, Clip chain, 8 Chamber Gas heated, Exit with Mahlo Weftstraigthener, Cooling zone, Batcher for enrolling on A Frames. It is stopped on Mill Floor.
AB72/071125/
IMPIANTI CONTINUI (ISOTEX) COATING RANGE
QUANTITY: 1
YEAR: 2002
WORKING WIDTH 2300MM
REFRURBISHED IN 2023 FITTED WITH NEW BURNERS ENTRY IN FEED SECTION 2 – CENTRE UNWIND STATIONS FOR A – FRAME BATCHES. 1 BIRCH MERROW TRAVERSING SEWING MACHINE. 1 INLET ACCUMULATOR 50 METERS FABRIC CONTENT 1 E+L CENTRALISING GUIDER 1 FINE TRIM LOAD CELL COMPENSATOR COATING 1 ISOTEX KNIFE OVER ROLLER COATING HEAD WITH THE OPTION TO COAT KNIFE OVER HOLLOW BED, OPERATORS PLATFORM, VIA 2 X 316 SS PATH ROLLERS, ON TO ADJUSTABLE COATING ROLLER, MICRO ADJUSTABLE COATING HEAD WITH DOUBLE SIDED COATING BLADE, TRAVERSING COMPOUND FEEDER, ADJUSTABLE SIDE DAMS, AC VARIABLE SPEED DRIVE WITH AUTO MANUAL CONTROLS, HIGH SPECIFICATION SAFETY INTERLOCKS IN ACCORDANCE WITH CE REGULATIONS. QUALITY COATING WEIGHT CONTROL SCANNING SYSTEM. 4 REINHARDT TECHNIK COMPOUND MIXING STATIONS TYPE ZFE 200L YEAR 2004 DRYING AND CURING ISOTEX SINGLE PASS DRYING OVEN 7 CHAMBERS DIRECT GAS HEATED COMPLETE WITH EXHAUST SYSTEM. TOP COATING UNIT ONE COATING HEAD AND ONE CHAMBER DIRECT GAS HEATED COMPLETE WITH EXHAUST SYSTEM EXIT OUTLET SECTION 2- COOLING ROLLERS 1 E+L CENTRALISING GUIDER 1 FINE TRIM LOAD CELL COMPENSATOR 2 – OPERATORS PLATFORM ONE WITH INSPECTION BACK LIGHTING. 1 OUT LET EXIT ACCUMULATOR 50 METERS FABRIC CONTENT 1 – CENTRE RE – WIND STATION FOR A – FRAME BATCHES.
AE56/051125D/ACP-P/F/BA/
Zimmer Rotory Printing
Quantity: 1, Year: 2012, 16 Color, 320cm Working Width, 4 Chamber Dryer, gas heated, maxon burner, Magnet type, simens PLC, repeat 640mm. The machine dismantled now.
AE56/051125D/ARI-AI/F/
Monfongs Stenter
QUANTITY: 1, YEAR: 2015,260CM ROLLER WIDTH,10 CHAMBER ,GAS HEATED,1 PADDER ,PIN CHAIN,LENZE INVERTOR ,SIMENS PLC,SIMENS MOTOR
AA10/090625E/CIY-AY/M/
Bruckner Stenter
Quantity: 1, Year: 2008, Type VN-SFP-26/6,width 2m60, 6 chambers, vertical pin + clip chain , electric and steam heating, equipped for knitted fabrics, 1 BRUCKNER Padder Type POWER-PAD, 1 MAHLO weft straightener
AD92/041125E/CCL-AL/F/AY/
Unitech Stenter
Quantity: 1, Year: 2013, w.w. 3.20 m, 6 chambers, Horizontal chain, Gas, padder, MAHLO automatic weftstraightener.stopped in mill floor
AB60/031125/
Muratex Transfer Calender Line
Quantity: 1, Year: 2020, Type 800/3400mm working width 3400mm, automatic sewing unit and J box unit, merrow usa brand sewing machine, folding unit, motorized batching arm for A frames, fabric centering roll, extraction head, 2 pcs antistatic bars, cooling fan for fabric exit, hard chromium covered main drum.
AI86/311025/AS/
Leo Sistig Velvet Brushing – Pol-Rotor – Shearing Machine
Renovated in 2023. A comprehensive overhaul was carried out. Complete mechanical and electrical overhauls were completed, and the machine is now fully operational.
AI86/311025/AS/
Monforst Stenter
Quantity: 1, Year: 2003, Working Width: 1.80, Burners are powered by natural gas., Double foulard. Mahl brand weft warp. Dock winding and shaking are available. The machine is in good working order, and all lubrication and maintenance are performed regularly.
AI86/311025/AS/
Reggiani Digital Printing
Quantity: 1, Year: 2016, Capacity: 32 heads, Regularly maintained, Actively producing, Width: 2 meters.
AD76/311025/AS/
Monforts Stenter
Quantity: 1, Year: 2006 (2013 complete reconditioning), 320 cm working width, 8 chamber, gas heated (Utku buners), Horizontal chain, Pin & Clip, Kuster padder, Mahlo weft straightener, At exit: plater, batcher, Mahlo, batcher station, CONDITION: installed and running situation.