Showing 1–50 of 146 results

Show sidebar

AB45/180122E/LY-Y/F/AY/

Schlafhorst Autoconer 338 Type K

Quantity: 2, Year: 2001 (ONE RIGHT HAND ONE LEFT HAND), 60 Spindles, Automatic feeding cone by cone type K, Exit 6” 4º20, Drum 2V asymmetric, Pilling System, Clearer Loepfe Yarnmaster, Head TK 940FN, 2 Piecer, Waxer, Mechanic AQUASPLICER- DZ3 16.1.E, FX system, Blower Electrojet, 380 V 50 HZ 68 A

AB45/120122/

Saurer-Schlafhorst Rewinding RC-100

Quantity: 1, Year 2004, 02 Positions with countmeter, Feeding revolver with 15 positions, Exit cone Cylindrical 10” (dimension – inside diam ~ 73 mm, bobbin length 290 mm), Doffing Cycle Automatic, Air splicer and Thermo Splicer, Clearers Lopfe, 400 V 50 HZ, Condition: dismanlted.

AA03/050122E/RC-R/F/AN/

Autoconer Schlafhorst 238-147D

Quantity: 1, Year: 1997, 40 spindles, 6” traverse, 2gg
cylindrical tubes, conical also possible, Autospeed,
thermosplicers, waxing device, Loepfe clearer Yarnmaster with sensors TK940F,
2 feeding stations for winding 2 lots on each 20 spindles,
2 cops preparation stations for copses length 180 until 280 mm, and cops diameter 32 until 72 mm,
doffer for cones, conveyor, overhead cleaner, very good condition, still in running position

AA03/050122E/CI.L-R/F/AN/

Autoconer Schlafhorst 138 GKT-X

Quantity: 1, Year: 1979, 24 spindles,
sectional drive for 8 spindles, tubes 230mm, 8“ 3°30,
steel traverse drums 2,5 gg, Loepfe clearer Yarnmaster TK770 for Nm 1-22, 3 splicer carts with termosplicers, pocket magazins for 5 cops,
length until 450 mm, diameter until 80-85 mm, Conometer, 1 bobbinchanger, overhead cleaner, good condition, still working, 380V/3Ph/50Hz

AA03/050122E/RC-R/F/AN/

Autoconer Schlafhorst 238-147

Quantity: 1, Year: 1995, 40 spindles, 6” traverse, 2gg asymmetric
cylindrical tubes, conical also possible, Autospeed,
thermosplicers, waxing device,Loepfe clearer Yarnmaster with sensors TK930F,1 feeding station
2 cops preparation stations for copses length 180 until 280 mm,
and cops diameter 32 until 72 mm,
doffer for cones, conveyor, overhead cleaner, very good condition, still in running position

AA03/050122E/CP-R/F/

Autoconer Schlafhorst 238-147

Quantity: 1, Year: 1996, 30 spindles, 6” traverse, 2gg
cylindrical tubes, conical also possible, Autospeed,
thermosplicers, waxing device,Loepfe clearer Yarnmaster with sensors TK930F, 1 feeding stations , 1 cops preparation stations for copses length 180 until 280 mm,, and cops diameter 32 until 72 mm,, doffer for cones, conveyor, overhead cleaner, very good condition, still in running position

AA03/050122E/RC-R/F/AN/

Autoconer Schlafhorst 238D

Quantity: 2, Year: 1998, 40 spindles, 6“ traverse, tubes 170 mm, Thermosplicers, Loepfe Yarnmaster, clearer TK940F, waxing device, Autospeed, 2 cops feeding stations for feeding 2 lots each 20 spindles, Alternative 10 + 30 spindles, 1 doffer cart, overhead cleaner, very good condition, runnung mostly only 2 shifts.

AE30/241221D/PA-L/F/BA/

Schlashorst X5 Winders

Quantity: 2, Year: 2010 , 60 spindles, Uster quantum 2 yarn clearer without FD, DZ3 splicer, with overhead blower, 2 turns, with FX sensor, NOTE: Machines installed in warehouse, Can trial run under power.
I personally inspected the machine but did not take video as the machines are not running.
Rating maybe 8.

AE30/111221D/SC-T/F/BA/

Schlashorst X5 Winders

Quantity: 3, Year: 2012 , 60 spindles, Uster quantum 3 yarn clearer without FD, DZ3 splicer, with overhead blower,
2 turns, these machines are without FX sensor, Running on mill floor. in good condition, quality is good rating 9.

AE30/211121D/SP-AI/F/BA/

Schlashorst X5 Winders

Quantity: 4, Year: 2011 , 60 spindles, Zenit yarn clearer with FD, DZ3 splicer, FX sensor, with overhead blower,Running on mill floor. in good condition

AE30/201121D/LL-T/F/BA/

Schlafhorst Autoconer 338 Winder

Quantity: 2, Year: 2009, 60 spindles, Loepfe TK840 without FD, Magazine type with 9 pockets, With FX Sensor, DZ1 splicer, 2 turns, Quality as inspected is 7 out of 10 (1 means very low, 10 means excellent), Machines stopped on Mill Floor.

AB45/191121/BY/

Schlafhorst Winders AC 338

Quantity: 3, Year: 2002, Model AC 338, 28 heads each (2 left side – no 1 right side), Cylinder cone-tips: 4°20″, USTER QUANTUM 3 integrated, 02 preparers, 03 dust removers, 2 trolleys, Spindle ID system SPID, 1 tube cleaner, Varopack, Propack, Condition: dismanlted.

AE02/121121/BY/

Schlafhorst Saurer Re-winder RC 200/2

Quantity: 2, Year: 2005
2 winding heads per machine, automatic cops changing, magazine, take-up 10” cylindrical, control panel, mech. clearer
Note: machines were only working for 4 years (then factory changed program)

AB45/111121/BY/

Schafhorst Winder 338

Quantity: 1, Year: 1999, 30 spindles
Exit cone 6”, Clearer Lopfe zenit for foreing fibers , 2 doffer , 2 kvb , Waxer, Water splicer, Blower Schlafhorst , 380 Volt 50 HZ

AE30/251021D/ST-P/F/BA/

Schlashorst X5 Winders

Quantity: 4, Year 2011, 60 spindles, Zenit yarn clearer with FD, DZ3 splicer, FX sensor, With overhead blower, Running on mill floor.

AC32/151021D/RL-C/F/BC/

Schlafhorst Auto Winder

Quanatity: 2, Year: 2001, Type: 338 RM, Megazin 6 hole
1 set x 50 drum, Yarn Clearer 50 drum : Loepfe TK940
1 set x 40 drum, Yarn Clearer 40 drum : Loepfe TK840
With Auto Doffer

AE30/180921D/ALP-P/F/BA/

Schlafhorst Autoconer X5 Winder

Quantity: 2, Year: 2011, 60 spindles, Uster quantum 3 yarn clearer, Magazine type with 9 pockets, With FX control, Waxing, DZ3 splicer, 2.5 turns.

AF53/220921/BO/

Schlafhorst Winder 338

Quantity: 1, Year: 2002, magazine 60 drum, Leopfe 840 TK

AA02/200921E/RST-RT/F/

Zinser Linked Ring Spinning Frames & Schlafhorst Autoconer Winders

4 Zinser Linked Ring Spinning Frames
Type 351‎
Year (1) 2002, (3) 2007‎
1008 Pos.‎
(3) Ring dia. 48 mm‎
(1) Ring dia. 50 mm‎
Gauge 75 mm
(3) Tube length 230 mm‎
(1) Tube length 250 mm‎
with Slubbing Device

Linked with:‎
4 Schlafhorst Autoconer Winders ‎
Type 338 V
Year: (1) 1999, (2) 2000, (1) 2002 ‎
(3) 30 Pos.‎
(1) 32 Pos.‎
Traverse 6”‎
Conicity 4 deg 20’‎
Loepfe Yarn Cleaners, Type TK930H

AE30/180921D/AOA-AA/F/BA/

Schlafhorst Autoconer X5 Winder

Quantity: 5, Year: 2012, 60 spindles, Uster quantum 3 yarn clearer, CBF type with auto feeding, With FX control, Waxing, DZ3 splicer, 2.5 turns.

AB46/160821/

Schlafhorst 338-D Winders

Quantity: 2, Year: 2000, 50 positions each, Loepfe TK840 yarn clearers
air splicer, 3 degree 51 conical take up, diameter top of cone: 6 cm. – 2.36 inches, diameter bottom of cone: 7 cm. – 2.75 inches, height of cone: 11 cm. – 4.3 inches, automatic feeding system & dump buckets

AB45/280721E/PR-R/C/AY/

Schlafhorst Autoconer 338 Type K (RIGHT HAND)

Quantity: 1, Year: 2005, 60 Spindles, Automatic feeding cone by cone type K, Exit 6” Cilyndrical , Drum 2V asymmetric, Pilling System, Clearer Loepfe Yarnmaster, Head TK 840, 2 Piecer, Waxer, Electric AQUASLICER -DS 1, PROPAC, FX system, Blower Electrojet, 380 V 50 HZ 66 A,

AE21/260520/

Schlafhorst Autoconer X5

Quantity: 1, Year: 2010
11 spindles ( section predisposal for 20 position ), 10 Spindles for cone to cone , exit 6” cilindrical, 1 Spindles for rewinding rest of cone alimentation n° 12 cone exit 6” cilindrical , Splicer ,Drums 2 ,5 assimetrical , Waxing , Yarn cleaner Loepfe Zenith 8 , 1 Doffer Trolley.

AE30/050721D/OY-T/F/

Schlafhorst X5 Autoconer Winder

Quantity: 1, Year: 2010, 60 spindles, Uster quantum 2 yarn clearer IMK O30 without FFD, magazine type with 9 pockets., 2 turns, DZ3 splicer, with FX control,, without waxing,, without auto doffer, with overhead blower, running on mill floor.
NOTE: Machines are in good working condition. ‎

AB46/160621E/AOI/C/AR/

Zinser 351 Ring Frame Linked to Schlafhorst Autoconer X5 Winder

Zinser 351 Ring:
Quantity: 1, Year: 2014, No. of spindles: 1152, Ring diameter: 42 mm, Gauge: 70mm, Ring spinning type: Bracker Titan, Ring profil: Normal, Tube length: 230mm, Tube conicity: 1:38, With Co-We-Mat type 395V, El. power: 3 x 400V, 50Hz, Main motor: 65Kw, With creel Zinser for flyer bobbins, 4 rows, Length of bobbins: 450mm, Diameter of bobbin: max 130mm, Draw system: PK2630SE, Entrance upper cylinder: LP1002, Middle upper cylinder: LP1003, Exit upper cylinder: LP1002, Size of upper cylinders: D19 – D30 – D28, Coating upper cylinder: Accotex J470 round, 70o Shore, Upper holder: OH2122, Upper belts: Accotex 78210G, Lower diameter cylinders : 32 – 30,5 – 32mm, Lower belts : Accotex 78210G, Size of lower belts: D79 x 30 x 1,1mm, Clean cylinders, Synchrodraft, With suction tubes

linked to Winder Schlafhorst Autoconer X5 Type V :
Quantity: 1, Year: 2014, 26 heads, Traverse: 6“ / 150mm, Machine length: 15,043 m, Machine width: 1,940 m, CTS+Caddystation ( Continuous Transfer Station), 3 x 400V, 50Hz, Auto Vacuum Control ( AVC), Wwith splicer, Yarn clearer: Loepfe

Very High Quality highly maintained machines. ‎
Voltage: 400 V
Hertz: 50 Hz

AA23/170421E/PS-O/C/AZ/

Schlafhorst Autoconers 338 D

Quantity: 2, Year: 2000, Each of 60 position, Delivery cones : cylinder 150 mm long. Steel drums. Yarn clearers – Loepfe TK940F, Thermo-splicers on each position. Height of bobbins can be from 260-360 mm ( here were 280 used – but it is changeable as per requirement). Bobbins magazine for automatic feeding. Overhead blower. Delivery cones : cylinder 150 mm long.
Mill floor, stopped.

AC09/130521/

Schlafhorst X5 RM Auto Winder

Quantity: 1, Year 2011, Type of Feed : Magazine, MC Hand : RHS, 60 Drums, Yarn Clearer Make : Uster Quantum 2, Measuring Head Type : iMK 030, Drum Type : Steel, Traverse : 6″, Splicer : DZ1/16.1E, Waxing : Available, Conicity : 5°57′, Suction : Individual, Hot Air Discharge : Downward, Drum Turns : UG 2.0 AS

AG75/090521D/ASY-S/F/BA/

New Orlikon AC X6 Winding Machines

Quantity: 5, Manufactured in March.2021, 70 spindles, Uster-3 foreign fiber detector, magazine。still in packages.

AE56/050521/

Schlafhorst Autoconer X5

Quantity: 3, Year: 2010, 60 spindle, With uster quantum 2 cleaner, With FD, O30 splicer, Running condition

AB34/040521E/YA.S-Y/F/AG

Schlafhorst Autoconer238

Quantity: 1, Year: 1992
With: 50 Spindles, Exit cone 4°20’/170 mm, Uster MK C15 AC clearers.

AG84/280421/

Schlafhorst Winder 338

Quantity: 7, Year 2004,2005, 2008, No of Spindle 60, Uster Quantum 2, With Waxing device

AE56/180421D/OY-T/F/BA/

Schlafhorst Autoconer X5

Quantity: 2, Year: 2011, 60 spindle, Uster quantum 2 cleaner, With tension sensor, These machines one set left hand, one set right hand , Running condition.

AA10/160421/

SCHLAFHORST AUTOCONER Cone Winder 338 RM

Quantity: 1, Year:2000, 60 heads, USTER Quantum clearers, blower system. 50 Heads magazine type.‎
‎10 Heads (1 section) modified cones to cones with fix pirn (no automatic change)‎
Available 10 magazines for spools.‎

AG48/180321E/YS-Y/F/AQ/

Automatic Winding Schlafhorst 238 MAX

Quantity: 1, of 30 spindles, input with creel with 5 position for tubes hight 450 mm completely new
out-put in cone of 6 Inch 4°20”
waxing device, , Thermo-Splicer for each spindles, cleaner device Loepfe Yarn Master with measuring heads TK 770, automatic doffing.
Machine completely overhauled mechanically and electronically.
Estimated hourly production data based on the various final count:
Nm. 2000 Hourly production 350 Kg. 30 spindles
No. 7000 Hourly production 120 Kg. 30 spindles
No. 20000 Hourly production 70 Kg. 30 spindles