AB08/170726D/AI.L-C/F/BJ/
Terrot Circular Knitting
Quantity: 2, Year: 2003, Type S296, 2003, Tracks: 4, Gauge: 24gg, Diameter: 30”, Feeds: 96, Lycra: no, Status: recently stopped.
AB08/170726D/AR.L-C/F/BJ/
Terrot Circular Single Knitting Machine
Quantity: 1, Year: 2007, Type S296-1, Tracks: 4 , Gauge: 28gg, Diameter: 30” , Feeds: 96, Lycra: yes, Recently stopped.
AD14/150726/
STOLL Machines
Quantity: 9
1- CMS 502HP, Year: 2017, GAUGE: 7
1- CMS 530HP, Year: 2011, GAUGE: 7.2
1- CMS 822HP, Year: 2014, GAUGE: 7.2
1- CMS 822HP, Year: 2011, GAUGE: 7.2
1- CMS 822HP, Year: 2011, GAUGE: 14
1- CMS 822HP, Year: 2010, GAUGE: 14
1- CMS 830HP, Year: 2018, GAUGE: 9.2
1- CMS 933HP, Year: 2010, GAUGE: 5
1- CMS 530 OKC, Year: 2008, GAUGE: 3,5.2
AD14/150726/
STOLL Machines CMS 830ki
Quantity: 2, Year: 2022, GAUGE: 3,5.2, Demonstration machine – Like NEW
AD14/150726/
STOLL Machines CMS 530ki
Quantity: 6, Year: 2019, GAUGE: 2,5.2
Quantity: 2, Year: 2019, GAUGE: 3,5.2
Quantity: 1, Year: 2023, GAUGE: 10
Quantity: 3, Year: 2023, GAUGE: 7.2
Quantity: 2, Year: 2022-2023, GAUGE: 14, Demonstration machine – Like NEW
AD14/150726/
STOLL Machines
Quantity: 6
5x CMS 502Ki, GAUGE:E7.2 Year: 2025
1x CMS 502Ki , GAUGE: 12gg (10gg needle hook) Year: 2024
BRAND NEW still in original box
AD36/130726/BG/
Mayer & Cie Knitting
AD36/130726E/AIA.L-T.L/M/BG/
2x Mayer & Cie OVJA 2.4 E, 38", set of 20, jacquard LGL feeder, Compact Attivo.
AD36/130726E/AAP-P/M/BG/
1x Mayer & Cie OVJA 1.6 EE 38", set of 20, Double jacquard disc and cylinder LGL/ Compact Attivo.
AE02/070726/
Karl Mayer Warp Knitting Machine RS MSUS-V
Quantity: 1, Year: 2003, width 213” (5400 mm)
*AE39/300626/
Jakob Muller Needle Looms
Quantity: 2, Year: 2007, Type: NF42 4/45 G year 2007
With double take off roller with steel for mid-heavy belt. With pressure roller with rubber, With 10 harness frame, With 4-14pick/cm, Invertor controller speed , With slow and fast speed, With binder system, With 4 contact rail, with re-direction roller, With stop motion, Condition: refurbished, clean and tested and ready to run on production.
*AE39/300626/
Jakob Muller Needle Looms
Quantity: 2, Year: 2000, Type: NFJM2 53 4/66 with 192 hooks
With new harness , With Uni controller from Floppy disk to USB converter , With rubber take down roller, With steel pressure roller , With 192 hooks , With 12 harness frame, With binder thread motion , With 8 repeat chain links , With slow motor, Machine condition: refurbished, clean, tested. ready to run on production.
*AE39/300626/
Lonati 412-P5 6 mm Tights Knitting
Quantity: 21 pcs, Year: 1993–1998, Cylinder / needles: 4 x 400, Type: Standard, Drive: Pneumatic, Take-off / ejection system: Klappe-type system, Condition: EXCELLENT
AB08/010726D/AC.L-C/F/BJ/
Monarch Circular Double Knitting
Quantity: 1, Year: 1998, Type V-LPJ3B, Tracks: mini jacquard, Gauge: 18gg, Diameter: 30”, Feeds: 72, Lycra: yes, Status: recently stopped.
AC86/240626/BY/
STOLL Knitting Plant
AC13/140626E/O-A/M/CG/
Pailung & Mayer Circular Knitting Machines
Quantity: 19
17x PAILUNG , Year: 5×2016–8×2021(New), 4×2018, Type: PL-KR2B-HS/C (9″–13″ diameter, 16–26 gauge)
2x MAYER , Year: 2010–2012, Type: FV 2.0 (10″–11″ diameter, 18–20 gauge)
Several of the PAILUNG machines are almost new, with very few working hours.
Condition: All machines fully operational, Some nearly new (YOC 2018–2021), in excellent condition.
They are not in operation(stopped), but are still power connected and were fully working before being shut down.
AA23/080626/AZ/
Mayer MCPE Knitting Machines
Quantity: 4, Year: 1998, IN EXCELLENT CONDITION, complete , running – Owner shrinking his capacity.
AA23/080626E/AL.L-C/M/AZ/
MCPE 2.4
Quantity: 3, 26 inch dia , gauge E 19
AA23/080626E/AT-C/M/AZ/
MCPE 2.4
Quantity:1, 30 inch dia , gauge E 20
AE02/010626/BY/
Terrot / Orizio / Vignoni / Monarch Circular Knitting Machines
1x Terrot SCC 572 Siemens C-creel, 1680 needles, E18, 30”
4x Terrot I3P 154 G-creel, 2256×2 needles, E24, 30”
1x Terrot I3P 154 G-creel, 1872×2 needles, E20, 30”
1x Terrot I3P 154 C-creel, 2988×2 needles, E28, 34” SOLD
2x Terrot I3P 154 C-creel, 3408×2 needles, E28, 38”
1x Terrot I2108 C-creel, 3408×2 needles, E32, 34”
3x Terrot I2108 C-creel, 3034×2 needles, E28, 34”
2x Terrot I3P 284, 2640×2 needles, E28, 30”
2x Terrot I3P 284 G-creel, 2640×2 needles, E28, 30”
3x Terrot S296-1 C-creel, 2640 needles, E28, 30”
1x Terrot S296-1 C-creel, 2580 needles, E28, 30”
3x Terrot S296-1, 2640 needles, E28, 30”
1x Terrot S296-1 BW, 3408×2 needles, E40, 34”
1x Terrot S296-1, 2640 needles, E44, 30”
1x Terrot S296-1, 3384 needles, E36, 30”
1x Terrot S3P172-1, 2628 needles, E28, 30”
1x Terrot S2112-2, 1872 needles, E20, 30”
1x Orizio John-TC, 3360 needles, E36, 30”
2x Orizio John-TC, 2580 needles, E28, 30”
1x Orizio John-TC, 3000 needles, E28, 34”
1x Orizio John-A, 2024 needles, E25, 26”
1x Vignoni Atlas-SV open-220, 2580 needles, E28, 30”
1x Vignoni Atlas-SV open-220, 2808, E28, 32”
2x Vignoni Santoni Atlas SV, 3576 needles, E36, 32”
1x Vignoni Santoni Atlas SV, 2808 needles, E28, 32”
1x Monarch MX-ZPL/4, 1932 needles, E24, 26”
2x Monarch VX-ZPL/4, 1932 needles, E24, 25“
AE02/010626E/ALO-AC/C/
Karl Mayer Tricot Machines HKS 3-M
Quantity: 5, Year: 2017, Type: HKS 3-M, E28, 218“.Machines have Electronic Guide Bar Control
AB46/300526/AR/
Pailung Circular Knitting Machines
Quantity: 1, Year: 2013, Model- PL-KS3B-H-W, 30” cylinder Diameter, Gauge 36, Needles 3420.
90 hard yarn feeders , for 70 to 85 denier polyester, 23 Lycra feeder 4 yarns /feeder, Slitter for fabric on winding unit to 60” on tube, Upgraded creel with air feed from package to feeder, Available for inspection, Dismantled But the machines ran for a very short time and we maintained them well.
AD14/290526/
Shima Seiki Knitting Machines
1x SVR 112SV 7gg, Year: 2015
2x SSR 112SV 14gg, Year: 2015
4x SSR 112SV 12gg, Year: 2016
4x SSR 112SV 7gg, Year: 2013
AB46/290526/
Karl Mayer Warp Knit Machines
Quantity: 2, Year: 2022, Model: Raschel RSE4-1, Gauge: 32, Width: 130”, Bars: 4, Speed is 2760 RPM., Application – Net Mesh Fabrics, Lace & Decorative Fabrics, Intimate Fabrics, Fashion Apparels, Technical Elastic Fabrics
AA10/270526/
COMEZ Crochet Knitting Machine
Quantity: 1, Year: 2000, mod. 610 ACO, gauge 10, 8 bars, mechanical, compatible with both involute and standard chain links, double weft device, picker and scissors.
AE02/260526/
Karl Mayer Jacquard Tronic Lace Raschel Machine
Quantity: 1, Year: 2012, Type: JL 59/1-B, gauge E24, 134”, spacing 1.0583 mm, with creel (jacquard)
AJ13/180526/
Karl Mayer Raschel Machine
Quantity: 1, Year: approximately 1991, Model: RMJG-4-FM, Gauge: 6/12, Components: 2 Jacquard machines and creel, Machine has not work full-time, Good condition.
AJ13/180526/
Karl Mayer Raschel Machine
Quantity: 1, Year: approximately 1991, Model: RMJG-4-FM, Gauge: 7/14, Components: 2 Jacquard machines and creel, Machine has not work full-time, Good condition.
AJ13/180526/
Karl Mayer Raschel Machine
Quantity: 1, Year: 1991, Model: HDRJ 5/2 PLM, Gauge: 14/28, Components: 4 Jacquard machines and creel, Machine has not work full-time, Good condition.
AB08/180526/BJ/
Terrot Circular Single Knitting Machine
Quantity: 1, Year: 2007, Type S296, Tracks: 4, Gauge: 24gg, Diameter: 30” , Feeds: 96, Lycra: no.
AB08/180526D/CP.L-Y/F/BJ/
Terrot Circular Double Knitting Machine
Quantity: 1, Year: 2013, Type UP472, Tracks: mini jacquard, Gauge: 28gg, Diameter: 30” , Feeds: 72, Lycra: yes, recently stopped.
AB08/110526D/AT-C/F/BJ/
Terrot Circular Knitting
Quantity: 1, Year: 2006, Type S3P 172-1, Tracks: mini jacquard, Gauge: 24gg, Diameter: 30”, Feeds: 72, Lycra: no, Status: recently stopped.
AE02/200426/
Karl Mayer warp knitting machine, 2010-2019
1 Karl Mayer warper type 091 30 DNC, with creel (610 pos.), year 2010
fully equipped with cameras and new monitor / computer
1 Karl Mayer warp knitting machine HKS-3 M, E28, ww. 130“, year 2019
1 Karl Mayer warp knitting machine HKS-3 M, E28, ww. 130”, year 2018
2 Karl Mayer warp knitting machine HKS-3 M, E28, ww. 180“, year 2012
1 Karl Mayer warp knitting machine HKS-3 M, E28, ww. 130 “, year 2019
1 Karl Mayer warp knitting machine HK-2, E28, ww. 180”, year 2014
1 Karl Mayer warp knitting machine HKS-3 M, E28, ww. 130”, year 2014
1 Karl Mayer warp knitting machine HKS-3 M, E28, ww. 186”, year 2012
PICTURES OF 2 MACHINES ARE ON THE LINK WITH MACHINES DETAILS
AA23/090426E/CSR-AR/M/AZ/
Karl Mayer MLF 46/24 Multibar Lace Machine Raschel
Quantity: 1, Year: 2016, Model E 18 of 242″
(installed in 2017 and worked seldom till now)
This machine was bought to start production of “EMBROIDERY TYPE OF COURTAINS “, but that project was dropped.
Machine on mill floor, running but very seldom due to low orders since their installation,. MACHINE LIKE NEW
Multibar Raschel Machine MLF 46/24 intended for the production of curtains and “allover” type lace. It can also make products from “lycra” elastic yarn. Working width 242″ (6147 mm) Gauge E18. Max speed 750 rev/min. Machine working time 6719 h.
The machine was manufactured in 2016 but assembled in the production department as a new one in January 2017. The working time is very low.
With its new MLF 46/24 in a width of 242″, the company will be showing an exceptionally wide Multibar lace machine with fall plate and without jacquard bars, offering an impressive level of productivity for a low investment outlay.
The MLF 46/24, with a working width of 242″ and a gauge of E18, will simultaneously be working four bordered webs with 145 cm widths of the finished fabric and 150 cm long patterns.
AD14/030426/CI/
Stoll CMS Knitting
AD14/200126E/O-A/M/CI/
1x STOLL CMS 433TC 12gg (10gg hook) 96", ST168
AD14/200126E/Y-A/M/CI/
1x STOLL CMS 330TC 12gg (10gg hook) 50", ST168
All complete and running.
AE02/030426/
Comez crochet knitting machines:
1 Comez Acotronic / 600, ww. 600 mm, 8 weft bars, gauge 15, year 2018
1 Comez 609/B8, gauge 20, year 2019
1 Comez 408 Futura, gauge 15, 8 bars, year 2020
AA02/010426E/CCI-AI/M/BY/
Karl Mayer Tricot Knitting
Quantity: 1, Year: 2019, Type HKS 4-M, Working width 4700 mm (186”), Gauge E28, With LEO (LOW ENERGY OPTION), With KAMCOS (KARL MAYER COMMAND SYSTEM), 4 Individual needle bar with compound needles, Slider bar with plate slider units (½”), Sinker bar with compound sinker units, All bars are made of carbon-fiber-reinforced plastic.
AG52/310326D/CT.L-R/BS/
Circular Knitting PILOTELLI
Circular Knitting PILOTELLI 32/28 High Speed , 35 RPM,
Year 2011,
Mounted/Complete , Ready to run
AB46/300326/
Mayer & Cie OVJA1.6E for Mattress fabrics
Mayer & Cie OVJA1.6E for Mattress fabrics
10 – 38″ 20gg 60 Feeders
Year – 1999 to 2003
Feeders – Memminger SFE
Mayer & Cie OVJA1.6E for Mattress fabrics
07 – 38″ 20gg 60 Feeders
Year – 2004 to 2010
Feeders – LGL Compact Attivo / Memminger SFE
AB46/160326/
Warp Knitting Machines
comprising models
Model: KS-3, KS4-EBC, HKS-2, KS3-EBC, HKS-2-92, HKS-2-93, KS3-EBA-1, and HKS-3-M
mostly in Gauge 28, with machine widths between 132 cm and 172 cm
ideal for various warp-knitted fabric applications.
AB46/140326D/ATC-AC/C/AR
Karl Mayer Warp Knit Machines, TOP CONDITION.
Karl Mayer Warp Knit Machines
– Model: Raschel
– Qty-02
– Year-2022
– Gauge: 32
– Width: 130”
– Bars: 4
Machines professionally dismantled, and moved to warehouse.
AE02/030326/AN/
Warp Knitting Machine for reinforced production. 2 different reinforced grids
1 Liba warp knitting machine DG 6-30 2HS ELS, width 84”, gauge E6, year 2007
1 Liba knitting machine COP HS2-ST HG, width 138”, gauge E6, year 2012
1 Karl Mayer Malimo knitting pattern machine 14022/PS-S2, 1/6” pitch (1/12” pitch possible), current width 50” (127 cm), cutting system, year 1998
(was running only in a technical school in Germany)
1 Karl Mayer warp knitting machine (basic warp knitting machine for feeding the above machines), max. ww. 3250 mm, gauge 1/6, year 2010
plus 1 extra machine body to work 8000 mm, plus 1 extra gear motor, plus many spare parts
Note: all machines can be purchased separately.
All machines are in top condition. The machines are designed for reinforced production. Basically 2 different reinforced grids (in roll or sheet format) can be produced: 2-dimensional and 3-dimensional.
There is plenty of raw material and finished goods in stock. Know-how can be transferred from the owner.
Application fields:
– basic warp knitting machine: various nets
– DG 6-30: 3-dimensional lattice structures by using glass / carbon rovings
– COP HS2: 2-dimensional lattice structures by using glass / carbon rovings
AA23/190226/
STOLL MACHINES ETC
AA23/190226E/AI-A/M/
CMS 330.6- gg 7 (installed gg5) ww 50” -Year: 1999
AA23/190226E/P-A/M/
CMS 430 - gg 7 (installed gg5) ww 96” -Year: 1999
AA23/190226E/Y.L-I.L/M/
CMS 330 - gg 7 - ww. 45 “ - Year 1993-95
AA23/190226E/Y.L-I.L/M/
CMS 330 - gg 7 - ww. 45 “ - Year: 1993-95
AA23/190226E/AC-A/M/
CMS 330TCC- gg 3 - ww 50” - Year after 2003
AA23/190226E/P.L-I.L/M/
CMS 320 C - gg 3 - ww 50” - Year: 1999
AA23/190226E/P.L-I.L/M/
CMS 320 C - gg 3 - ww 50” - Year: 1999
Auxiliaries:
- Hem/pleating machine -
- Round stiching (egless connecting of collars etc)
- Set of Juki overlocs and stiching machines
AA02/250226/
Liba Multi Axial Composite Machine
Quantity: 1, Year: 2001, Model Max 3.CNC/S3M5, 101 inch working width (256.54 cm), E10 gauge (2.54mm), With all New B&R CNC controls by Karl Mayer in May 2021, Pin chain laying of 3 Weft systems and 5 modules.
Including:
1x Mengen Wind up Model SW501S+P
2x Neuenhauser Suction Devices Model HB.2427C
1x AMBA Fabric heating system
2x LIBA Multii Angle Feeding devices
1x LIBA 90 degree Feeding device
1x Protechna Laser Stop Warp scanner
Running machine in operation.
AA23/190226/
STOLL Machines
Quantity: 8
All machines complete, stopped December 2025.
KNITTING UNIT WITH STOLL MACHINES:
AA23/190226E/P-I.Y/M/
1. CMS 430.6 - ww 96” - E10
AA23/190226E/AR-A/M/
2. CMS 422.6 - ww 96” - E7
AA23/190226E/P-I.Y/M/
3. CMS 430.6 - ww 96” - E10
AA23/190226E/O.L-I.L/M/
4. CMS 320 TC - ww 50” - E3
AA23/190226E/AR-A/M/
5. CMS 330 TC - ww 50” - E12
AA23/190226E/O.L-I.L/M/
6. CMS 320 C - ww 50” - E3
AA23/190226E/P.L-I.L/M/
7. CMS 430.6 - ww.96” - E7
AA23/190226E/L.L-I.L/M/
8. CMS 430 - ww 96” - E7
Auxiliary equipment:
AA23/190226E/C.L-I.L/M/
1x Steaming table CAS 90 ( Italy) YOC 2000 with electric stem generator.
AA23/180226/
STOLL Machines
Quantity: 14 Stoll machines.
All machines complete, still working but very low orders . Excellent condition.
KNITTING UNIT WITH STOLL MACHINES:
AA23/180226E/YR-Y/M/
1. ADF 530-24 - gauge 3.5.2 (multi), Year: 2019
AA23/180226E/CY-C/M/
2. ADF 530-16 - gauge 3.5.2 (multi), Year: 2016
AA23/180226E/CP-R/M/
3. CMS 520 C - gauge 1.5.2 (multi), Year: 2016
AA23/180226E/CI-C/M/
4. CMS 530 HP - gauge 3.5.2 (multi), Year: 2013
AA23/180226E/CI-C/M/
5. CMS 530 HP - gauge 3.5.2 (multi), Year: 2013
AA23/180226E/AY-A/M/
6. CMS 520 C - gauge 3.5, Year: 2011
AA23/180226E/AY-A/M/
7. CMS 520 C - gauge 3.5, Year: 2011
AA23/180226E/AA-A/M/
8. CMS 530 - gauge 5.2 (multi)
AA23/180226E/S-A/M/
9. CMS 320 TCC - gauge 3
AA23/180226E/O-A/M/
10. CMS 320 TCC - gauge 3
AA23/180226E/O-A/M/
11. CMS 320 TCC - gauge 3
AA23/180226E/O-A/M/
12. CMA 320 TC - gauge 7
AA23/180226E/P-A/M/
13. CMS 330 TC - gauge 5
AA23/180226E/P-A/M/
14. CMS 330 TC - gauge 5
Note: multi gauge means that machine can work 2 different gauges (example gg3.5.2 means that may work 3.5 or 7 gauage)
Auxiliary equipment:
AA23/180226E/Y.L-I.L/M/
2x Hem pleating machines model SIMET APM A2
AA23/180226E/Y.L-I.L/M/
1x Winder of 4 positions
AA23/180226E/A-I.A/M/
4x Steaming tables Nustri
AA23/180226E/A.L-I.R/M/
1x Steaming table Alux
AA23/180226E/L.L-I.L/M/
1x GIRBAU washing machine
AA23/180226E/L.L-I.L/M/
1x IPSO washing machine
AA23/180226E/R.L-I.L/M/
1x Electrolux tandem dryer
AA23/180226E/AT-A/M/
2x Steam generator ( oil) JUNGEN
AA23/180226E/Y.L-I.L/M/
2x Design software for STOLL
Additional equipment (3 Juki and 1 Brother stiching machines)
Can be sold per piece or as a whole unit inclusive: design software, steaming atbles, washing , drying of ready garments and also steam generation unit.
AB52/050226/
Liba COP 3 Warp Knitting / Raschel
Quantity: 1, Year: 1996, Model: COP 3, Gauge E28, Working width: 112 inches.
AB52/050226/
Liba COP 3 Warp Knitting
Quantity: 1, Year: 2004, Model: COP 3, Gauge E28, Working width: 112 inches.
AB52/050226/
LIBA COP 4 Warp Knitting for Raschel Knitting
Quantity: 2, Year: 1996, Model: COP 4, Gauge E28, Working width: 112 inches.
AB52/050226/
Liba RACOP Warp Knitting
Quantity: 1, Year: 2013 (Origin 1992), Type 2V 130″ E12/E6.
Frame separate 2 x 30″; 2 shafts dia. 152 mm; 1 shaft dia 70 mm for the Vlies ; Vlies system ; EWA for electronic control of the batcher ; 6 beams 21″ x 21″ completely revised and totally rebuilt in 2013 by the maker the machine !
The machine only worked 75 hours.
AB52/050226/
Karl Mayer RJPC Warp Knitting
Quantity: 1, Year: 1998, Model: RJPC 4 F-NE, Jacquard Raschel Machines, Gauge E18, Width: 230 inch, Creel available as extra.
AB52/050226/
Karl Mayer RJSC Warp Knitting
Quantity: 3, Year: 1996/1997, Model: RJSC 4 F-NE.
Gauge: 1 machine is Gauge E7/14 , 1 machine is Gauge E14 , 1 machine is Gauge E9/18.
Working width: 130 inch, Creels available at extra cost.