AG32/200325E/AIO-S/F/AN/
Dilo Needle Loom
Quantity: 1, Year:: 1986 (needle loom),1989 (feeding system)
incl. DILO feeding system
type: OD 2-25 (needle loom)
CBF / 25 (feeding system), 6864 (feeding system)
working width: 2.500mm
technical data: 12.000 needles / m, needle bar stroke 60mm
stroke rate max. 1.200 UpM, feeding system rebuilt / upgraded in 2020
AG47/070325E/CSP-AP/M/
Needling Line
Year: 1991-1998, ww: 3 m
Consisting of:
2x Laroche bale openers, yoc: 1991
1x Thibeau double doffer card, yoc: 1998, ww: 2.5 m
1x Asselin 390 cross-lapper, yoc: 1991, output: 3 m
1x Dilo OUG II finishing needle loom, with CBF, yoc: 1991, ww: 3 m, double board downstroke, double board upstroke, 6 000 needles/m
1x winder
Needling Line
Year: 1991-1998, ww: 3 m.
Consisting of:
2x Laroche bale openers, yoc: 1991
1x Thibeau double doffer card, yoc: 1998, ww: 2.5 m
1x Asselin 390 cross-lapper, yoc: 1991, output: 3 m
1x Dilo OUG II finishing needle loom, with CBF, yoc: 1991, ww: 3 m, double board downstroke, double board upstroke, 6 000 needles/m
1x winder
AG82/250225/
Asselin Needle Loom
Quantity: 1, Year: 1982, Type: 169, Working width: 3.400 mm.
Needle Density: 2x 460 N/m, Needle boards: 1 set (two boards), Spare board: 1/2 set (one board)
Control system: Machine is without control system, Dimensions: Width 4.100 mm; Length 1.000 mm; Height: 1.450 mm
AG82/250225E/LY.L-L/M/
Fehrer NL 9/S Needle Loom
Quantity: 1, Year: 1987 , Type: NL9S, ww: 3.3 m, stroke: 60 mm, 4 750 needles/m.
AG47/210225E/RCL-AL/M/
Autefa Stylus Variliptic DZ-R/S Finishing Needle Loom
Quantity: 1, Year: 2016 – control panel and electrical panel from 2024, ww: 3 m, Double board upstroke, Stroke: 40 mm, 10 000 needles/m, 1 900 rpm.
AG47/210225E/TR-T/M/
Fehrer NL 42 Finishing Needle Loom
Quantity: 1, Year: 1988, ww: 4 m, Double board downstroke, Stroke: 60 mm, 10 000 needles/m, 1 200 rpm.
AG47/210225E/TR-T/M/
Fehrer NL 21/R Finishing Needle Loom
Quantity: 1, Year: 1978, ww: 4 m, Double board upstroke, Stroke: 40 mm, 10 000 needles/m, 1 200 rpm.
AG47/210225E/COP-AR/M/
Fehrer NL 36/150 Finishing Needle Loom
Quantity: 1, Year: 1995 – fully refurbished and modernized in 2024 (as new!), ww: 3.3 m, Single board downstroke, Single board upstroke, Stroke: 150 mm, 8 000 needles/m, 800 rpm.
AG47/210225E/LP-L/M/
Automatex PR30 Pre-Needle Loom
Quantity: 1, Year: 1994, With batt feeding system, ww: 2.7 m, Single board downstroke, Single board upstroke, Stroke: 70 mm, 6 000 needles/m, 1 100 rpm.
AG47/210225E/ALS-AY/M/
Fehrer NL 9/S Pre-Needle Loom
Quantity: 1, Year: 1983 – fully refurbished and modernized in 2024 (as new!), ww: 4 m, Single board downstroke, stroke: 60 mm, 1 200 rpm.
AG47/210225E/YR-Y/M/
Dilo OUG Finishing Needle Loom
Quantity: 1, Year: 1988, ww: 2.5 m, Double board downstroke, Double board upstroke, Stroke: 60 mm, 11 600 needles/m, 1 200 rpm.
AG47/210225E/YR-Y/M/
Dilo OD II Finishing Needle Loom
Quantity: 1, Year: 1988, With CBF, ww: 3 m, Double board downstroke, Stroke: 60 mm, 3 800 needles/m, 1 200 rpm.
AG47/210225E/AIO-O/M/
Fehrer NL 21/S Finishing Needle Loom
Quantity: 1, Year: 2001, ww: 3 m, Double board downstroke, Stroke: 35 mm, 10 000 needles/m, 2 200 rpm.
AG82/280125E/APS-P/M/AN/
Reisky & Schlese Carding
Quantity: 1
Year: 2004
Reisky & Schlese Hopper Feeder
– Feeding chute
– Horizontal conveyor
– Spike apron
Reisky & Schlese Weighing scale
Reisky & Schlese Nonwoven Card
Working weidth: 2.500 mm
– Upside down dish feeding system
– First Tambour with 2x worker/stripper
– Main Tambour with 5x worker/stripper
– 2x Doffer
– Roller take off
AA10/280125/
Dilo Needling Loom OUG 1
Quantity: 1, Year: 2001, Type OUG 1, Width 250 cm, Double needling, 1 needle board (1 top, 1 bottom), Stroke 60 mm, Batt feeder CBF 25.
AG82/160125/
Needle Punching Line
Width: 2.500mm , Bale Opener
Carding machine with hopper feeder, Make: HDB / Galaxy, Working width: 2.500 mm, Crosslapper
Make: Autefa / CL2000, Width: 2.500 mm / 2.800 mm, Needle loom with feeding system, Make: DILO / DI-LOOM OD-II 25, Working width: 2.500 mm, Winder
AG82/160125/
Needle Punching Line
Width: 2.500mm,Bale Opener, Carding machine with feeder, Make: FOR
Working width: 2.500mm, Cross Lapper, Make: Autefa / C60, Working width: 2.500mm / 3.000mm
First Needle Loom, Make: Dilo / Di-Loom OUG-II S25, Second Needle Loom, Make: Dilo / Di-Loom OD-II S25, End-of-Line
AG82/160125/
Needle Punching Line
Width: 2.500mm , Bale Opener, Carding machine with feeder, Make: Spinnbau
Working width: 2.500mm, Cross Lapper, Make: Autefa /CL2000, Working width: 2.500mm / 3.000mm
First Needle Loom, Make: Dilo / Di-Loom OUG-II S25, Second Needle Loom, Make: Dilo / Di-Loom OD-II S25, End-of-Line
AG82/160125/
ASSELIN Rib Structuring Needle Loom
Quantity: 1, Year: 2002, Type: A50S SDB1, Working width: 4.400 mm
Stroke: 35 mm, Lamella Gauge: 3,5 mm, Stroke frequency: max 1.750 rpm
Needle pattern: approx. 10.570 N/m, Including electrical control cabinet.
AG47/130125E/RRL-CL/M/
Needling Line
Year: 1999-2010, ww: 5 m.
Consisting of:
1x Temafa bale opener
1x Temafa blending opener
1x Temafa carding willow
1x Temafa blending box
1x Trützschler fine opener, yoc: 2005
1x FOR double doffer card, ww: 2.5 m
1x Autefa cross-lapper, yoc: 1999, input: 2.5 m, output: 5 m
1x Dilo Di-loom finishing needle loom, with CBF, yoc: 1999, ww: 5 m, double board upstroke, 18 000 needles/m, 1 500 rpm
1x Dilo Di-loom finishing needle loom, yoc: 1999, ww: 5 m, double board downstroke, 18 000 needles/m, 1 500 rpm
1x Dilo Di-lour structural needle loom, yoc: 1999, ww: 5 m
1x Edge trim opener
1x Cutting and winding unit
AG47/191224E/ORL-RL/M/
Needling & Thermobonding Line
Year: 1988-2019 – refurbished and modernized 2011-2022, ww: 2.2 m
Consisting of:
1x Temafa bale opener, yoc: 1988, ww: 1.3 m
2x Temafa Mixmaster blending boxes, yoc: 1988 – refurbished in 2019, length: 13.5 m, width: 3 m, height: 4.7 m
1x Temafa fine opener, yoc: 1989, ww: 1.3 m
1x Spinnbau double doffer card, yoc: 1988 – refurbished in 2019, ww: 2.5 m, condensing cylinders
1x Asselin Profile cross-lapper, yoc: 1997 – refurbished in 2017, input: 2.5 m, output: 3.3 m
1x Fehrer NL 9/S pre-needle loom, yoc: 1988 – refurbished in 2020, ww: 3.6 m, single board downstroke, 3 000 needles/m, 1 300 rpm
1x Fehrer NL 21/R finishing needle loom, yoc: 1988 – refurbished in 2011, ww: 3 m, double board upstroke, 6 000 needles/m, 1 300 rpm
1x Fehrer NL 21/R finishing needle loom, yoc: 1988 – refurbished in 2011, ww: 3 m, double board downstroke, 6 000 needles/m, 1 300 rpm
1x Dilo Di-lour II structural needle loom, yoc: 1994 – refurbished in 2018, ww 2.4 m
1x Icomatex latex applicator, yoc: 2019, ww: 2.4 m
1x Fleissner drum oven, yoc: 1988 – refurbished in 2022, ww: 2.2 m, 5 drums
1x Reyfam scattering unit and calender, yoc: 1996 – refurbished in 2021, ww: 2.2 m
1x Cima accumulator, yoc: 1990, ww: 2.25 m
1x Cima cutting and winding unit, yoc: 1990, ww: 2.25 m
Up to 500 kg/h
AI31/051024/
Jakob Muller Needle Looms
Quantity: 20
AI31/051024D/AC.P-R/F/
4x Jakob Muller Needle loom NF53 6/42, Year 2001:
with rubber take down roller
with steel pressure roller
with 16 harness frame
with 8 repeat chain links
with binder thread motion
without slow motor
with warp stop motion device
with re-directional roller
Condition - Fully refurbished, complete, clean and in good working order.
Voltage : 230/400VAC 50hz, 275/480VAC 60hz.
AI31/051024D/AY.L-R/F/
5x Jakob Muller Needle loom NF53 8/27, Year 2005-2006
with rubber take down roller
with steel pressure roller
with 16 harness frame
with 8 repeat chain links
with binder thread motion
with slow motor
with warp stop motion device
with re-directional roller
Condition - Fully refurbished, complete, clean and in good working order.
Voltage : 230/400VAC 50hz, 275/480VAC 60hz.
AI31/051024D/AC.L-R/F/
2x Jakob Muller Needle loom NF42 4/45G, Year 2007:
with Steel double take down roller for mid-heavy belt
with rubber pressure roller
with 10 harness frame
with 8 repeat chain links
with binder thread motion
with slow motor
with warp stop motion device
with re-directional roller
Condition - Fully refurbished, complete, clean and in good working order.
AI31/051024D/AC.L-R/F/
2x Jakob Muller Needle loom NF42 2/66 G, Year 2007:
with Steel double take down roller for mid-heavy belt
with rubber pressure roller
with 10 harness frame
with 8 repeat chain links
with binder thread motion
with slow motor
with warp stop motion device
with re-directional roller
Condition - Fully refurbished, complete, clean and in good working order.
AI31/051024D/AC.P-R/F/
2x Jakob Muller Needle loom NF53 4/66, Year 2001:
with rubber take down roller
with steel pressure roller
with 16 harness frame
with 8 repeat chain links
with binder thread motion
without slow motor
with warp stop motion device
with re-directional roller
Condition - Fully refurbished, complete, clean and in good working order.
Voltage : 230/400VAC 50hz, 275/480VAC 60hz.
AI31/051024D/AS.P-R/F/
1x Jakob Muller Needle loom NFJM53 6/50, Year 1999:
with 192 hooks
with new harness
with rubber take down roller
with steel pressure roller
with 12 harness frame
with 8 repeat chain links
with binder thread motion
with USB converter
with slow motor
with warp stop motion device
with re-directional roller
Condition - Fully refurbished, complete, clean and in good working order.
AI31/051024D/AS.P-R/F/
1x Jakob Muller Needle loom NFJM53 6/42, Year 1999:
with 192 hooks
with new harness
with rubber take down roller
with steel pressure roller
with 12 harness frame
with 8 repeat chain links
with binder thread motion
with USB converter
with slow motor
with warp stop motion device
with re-directional roller
Condition - Fully refurbished, complete, clean and in good working order.
AI31/051024D/AS.P-R/F/
2x Jakob Muller Needle loom NFJM53 4/66, Year 2000:
with 192 hooks
with new harness
with rubber take down roller
with steel pressure roller
with 12 harness frame
with 8 repeat chain links
with binder thread motion
with USB converter
with slow motor
with warp stop motion device
with re-directional roller
Condition - Fully refurbished, complete, clean and in good working order.
ALL LOOMS ARE FULLY TEST AND READY TO RUN ON PRODUCTION.
AG47/131224E/PA-T/M/
Automatex PR50/T Pre-Needle Loom
Quantity: 1, Year: 1993, With batt feeding system, ww: 2.5 m, Single board downstroke, stroke: 55 mm, 5 000 needles/m, 1 200 rpm, with Tallers Porto chute feeder/opener, yoc: 1993, ww: 2.15 m and Manes accumulator, longitudinal & cross cutting machine, yoc: 1993, ww: 2.5 m, loom is in this configuration able to make felts without the need for card or airlay system.
AG82/101224/
Tectex Needle Loom
Quantity: 1, Year: 2019, Type: QP30, Working width: 3.000 mm, Needling: 4 Boards, 2 Down-Stroke/2 Up-Stroke, Stroke: 60 mm, Strokes: max. 1.200 Strokes/min, Needles: approx. 4 x 5.000 Needles/m, Including Batt Feeding Unit, Including Control System.
AG82/101224/
Dilo DiLour-II25
Quantity: 1, Year: 1985, Working width: 2.500 mm, Needling: 2 Boards Down-Stroke, Stroke: 40 mm, Strokes: max. 1.200 Strokes/min, Needles: approx. 2 x 4.000 Needles/m, Including Unwinder, Including Winder, Including Control System.
AG82/101224/
Dilo Needle Loom OD-II25
Quantity: 1, Year: 1991, Working width: 2.500 mm, Needling: 2 Boards Down-Stroke, Stroke: 60 mm, Strokes: max. 1.200 Strokes/min, Needles: approx. 2 x 1.920 Needles/m, Including Unwinding Station, Longitudinal & Cross Cutting, Winder and Control System.
AG47/220524E/TA-T/M/
Airlay Needling line
Quantity: 1, Year: 1982 – upgraded with Siemens PLC and frequency inverters in 2003, ww: 2.3 m
Consisting of:
1 Fehrer K12 airlay system, ww: 2.3 m, 1 Asselin 169 pre-needle loom (drum tacker), ww: 2.8 m
1 Fehrer NL 21 finishing needle loom, ww: 2.4 m, 4 500 needles/m, Up to 500 kg/h
AG47/091224E/COY-AY/M/
Airlay Needling Line
Year: 2016, ww: 2.6 m
Consisting of:
2x Bematic Bemablow fine openers, Year: 2016, ww: 2.5 m
1x Bematic T-Max 350 airlay system, Year: 2016, ww: 2.6 m
1x TecTex PR50 pre-needle loom, with batt feeding system, Year: 2016, ww: 2.8 m, double board downstroke, stroke: 70 mm, 3 500 needles/m, 1 100 rpm, with unit to turn the material backwards into the loom for second needling and hence machine can work as a finishing needle loom.
AG47/210624E/AO-C/M/
Dilo Pre-Needle Loom
Quantity: 1, Year: 1980s – refurbished in 2017, ww: 2.2 m, Double board downstroke, Stroke: 60 mm, 1 768 needles/m, 1 000 rpm, with longitudinal cutting and winding unit.
AA22/281124E/YC-Y/M/BR/
Dilo Structural Needle Loom
Quantity: 1, Year: 1989, Width: 4500mm, Type: DI-LOOP DS 45
Dilo invented the structuring and patterning of preneedled needlefelts in the 1960s. In this process, special fork needles transport fibre loops from the needlefelt into a lamellar grid resulting in pile loops on the backside of the needlefelt. By using different needle arrangements and multi-coloured layers of needlefelts, a great variety of patterns can be realized. A programme-controlled lifting and lowering of the lamellar table allows three-dimensional designs, ideally used for carpets and door mats with patterns, ribcord, tufts, velour structures. High capacity structure loom for ribcord, velour type needle felts and advance patterns, 40 mm stroke, 1500 strokes/min, 6000 needles/lm, gauge 3.5 mm, automatic lubrication, temperature control, and lubricant discharge. Complete with Dilo SW 45 feeding unit and un-winding unit and control panel + electronic software for patterning design.
Prices VALID until Dec 17. 2024 (deposit should be received before Dec 17)
AG82/261124/
Needle Punching Line
Quantity: 1, Capacity: 600 – 750 kg/h depending on fibres, Fiber: synthetic & viscos, Fiber fineness: 1,7 – 6,7 dtex, Grammage: 50 – 1200 g
Consisting of:
Blending line – Make: Truetzschler
Fine opener – Make: Truetzschler, Card feeder – Make: Truetzschler – Type: FBK
Weighing scale, Carding machine – Make: Reisky & Schlese – WW: 2.500mm – double doffer
Crosslapper – Make: Reisky & Schlese – WW: 4.500 mm, Web drafter – Make: Asselin – WW: 4.300 mm
Needle loom – Make: DILO – Type: DI-Loom OUG II S40, Metal detection – Make: Mesutronic
Winder – WW: 4.000 mm, Edge trim opener – Make: Temafa
AG47/231124E/RP-R/M/
Fehrer NL 28/S Pre-Needle Loom
Quantity: 1, Year: 1987, ww: 3 m, single board upstroke, stroke: 60 mm, 900 rpm.
AG47/011124E/ASS-AY/M/
Needling Line
Year: 1986, ww: 3 m
Consisting of:
1x Spinnbau double doffer card, ww: 2.5 m, avantrain + 1 swift, randomizing cylinders
1x Autefa cross-lapper, input: 2.5 m, output: 3.5 m
1x Spinnbau double doffer card, ww: 2.5 m, avantrain + 1 swift, randomizing cylinders
1x Autefa cross-lapper, input: 2.5 m, output: 3.5 m (top insertion trolley is missing)
1x Dilo OD I 35 pre-needle loom, with CBF, ww: 3.5 m, single board downstroke, stroke: 60 mm, 2 850 needles/m, 1 200 rpm
1x Dilo OD II 35 finishing needle loom, with CBF, ww: 3.5 m, double board downstroke, stroke: 60 mm, 8 000 needles/m, 1 200 rpm
1x Dilo TC 30 accumulator, ww: 3 m
1x Dilo OUG II 30 finishing needle loom, ww: 3 m, double board downstroke, double board upstroke, stroke: 40 mm, 13 300 needles/m, 1 200 rpm
1x Dilo TC 30 accumulator, ww: 3 m
1x Dilo OUG II 30 finishing needle loom, ww: 3 m, double board downstroke, double board upstroke, stroke: 40 mm, 16 000 needles/m, 1 200 rpm
1x Dilo TC 30 accumulator, ww: 3 m
1x Dilo cutting and winding unit, ww: 3 m
2x Temafa edge trim openers
Up to 400 kg/h
AF12/251024E/YRL-RL/M/AX/
1 x 5.0m Dilo Needleloom Nonwoven Line with Dilour Raising (for Automotive)
Year: 1999
Brief technical information:
Fibre Blending
Temafa 25m Conveyor (fits 8 bales end to end)
Temafa Single pin sheet blending hopper with Volumetric feed
Temafa Fearnaught Fibre opening, Type RD02
Oiling
Temafa Metal detection
Fan
Feed to either:
Temafa Mix master blending bin with conveyor floor (approx. 20m x 4m) – Type MM20 / 2
Or
Temafa Small Blending bin (5m x 5m)
Or
2 x Temafa blending bins each approx. 2500kgs with single bin Temafa emptier
Temafa fabric condenser and feed tower (10m high)
Trutzschler FD-S fine fibre opening (2005)
Carding
Trutzschler volumetric card hopper feed
2.5m FOR multi-cylinder nonwoven card with double doffer (Serial No. 83001)
Production rate up to 500kgs per hour
Cross lapper
Autefa Cross Lapper (Type 190 73) with 2.5m inlet and 5.0m max lay width (1999)
Serial No 3026
Needlepunch
Sound proof cabinet
5.0m Dilo pre needle (Type CBF T 50, 1999)
(Input web compression sheets with finger system)
5.0m Dilo Needle loom 1:
Type DI-LOOM UD-Li S 50 (1999)
Stroke: UP
Twin Board
Total Needles 90000
Needle Density: 1800 needles /m
Max Gap: mm
Max needled width: 5.0m
RPM: 1500 (Max)
5.0m Dilo Needle loom 2:
Type DI-LOOM UD-II i S 50 (1999)
Stroke: DOWN
Twin Board
Total Needles 90000
Needle Density: 1800 needles /m
Max Gap: mm
Max needled width: 5.0m
RPM: 1500 (Max)
5.0m Dilo Needle loom 3 (Dilour):
Type DI-LOUR-II SXBG 50 (1999)
Stroke: DOWN
Twin Board
Total Needles 160000
Needle Density: 3200 needles /m
Fork needles
Brush conveyor
Max Gap: mm
Max needled width: 5.0m
RPM: 1900 (Max)
Finishing
Menzel J Box
Menzel Overhead gantry
Menzel 5m metal detection
Sellers 5m cropping/shearing + 12 bag fibre/lint collection (2008) (not been used for several years)
4 head edge and centre fabric slitting
Edge trim – Hepp-Schwamborn (Germany) – Edge shredding with fan
ETF cross cutting
ETF batching roll wind-up (2006)
Fabric measure
ETF cross cutting
ETF take-off rolls
6 x fabric roll transport trucks
Electrical Supply: 3 Phase 380-440v, 50Hz
Spare parts: All related spare parts and accessories available in the factory (If any).
Manuals: All manuals available in the factory (If any).
Currently being used in the production of: Automotive Nonwoven Velour Fabrics
Additional information:
Status: Still operating and can be seen running
Condition:Complete and in good working condition
Delivery: End March 2025 onwards
Transport: 25 x 240ft Container (Estimated)
AA10/231024/
Muller Looms
1 Lot of label weaving composed of:
1x MULLER Loom mod.MUGRIP MBJ3, Year: 1997, fully reconditioned 2019/2020, updated with repair kit 2021, with Jacquard 936 hooks, semi-satin.
2x MULLER Looms mod.MVC2.1-200 15/30, Year: 2002, reconditioned 2019/2020, 25 mm., with Jacquard 384 hooks.
1x MULLER Loom mod.MVC2.1-200 14/36, Year: 2003, with Jacquard 512 hooks.
AA10/231024/
Muller Label Looms MVC 200
Quantity: 2, 120 ends + monofilament for tot. 150 ends/cm. :
(1) 20 labels 20 mm. and (1) 14 labels 30 mm., + height reducer label and expanded memory, Mudata 4 and Digikast.
AF08/181024D/API-AL/F/CM/
Muller MVC2-150 Needle Looms
Quantity: 6
1x Year: 02/1997, 10/36,768/512 hooks.
1x Year: 02/1997, 14/24,768/320 hooks.
1x Year: 02/1997, 12/30,768/448 hooks.
1x Year: 05/2000, 12/30,768/256 hooks.
1x Year: 05/2000, 12/30,768/448 hooks.
1x Year: 04/2001, 14/24,768/320 hooks.
The machines still running with a good condition.
AF08/161024/CM/
Muller MVC-200 Needle Looms
Quantity: 7, Year: 1994, Still running.
AF08/141024D/AO-R/F/CM/
2 sets with new harness, in production.
AF08/141024D/AI.L-C/F/CM/
5 sets with old harness, stopped on factory floor.
AG82/250924/
Needle Punching Nonwoven Line
Consiting of: Bale opener – Make: Temafa – WW: 3.500 mm
Hopper Feeder, Weighing Scale, Carding machine – Make: HDB / Galaxy – WW: 2.500 mm – double doffer
Cross lapper – Make: Autefa – Type: CL2000 – WW: 2.800 mm
Needle loom – Make: Dilo – Type: CBF 25 / DI-LOOM OD-II 25, Winder
AG47/130924E/RY-Y/M/
Automatex Pre-Needle Loom
Quantity: 1, Year: 2002, ww: 2.4 m, Single board downstroke, 3 480 needles/m.
AA22/090924D/AOC-AY/F/AR/
Dilo Structural Needle Loom
Quantity: 1
Year: 1987-2021
Type: Di-Lour II 25
Width: 2500mm
Completely rebuilt and upgraded with brand new electronics in 2021. Further aftermarket upgrades:
1. eccentric air cooling system: eemperature auto start
A. temperature sensors on each eccentric
2. central lubrication system for eccentrics & main bearings: automatic (Time Auto Start) & manual greasing
A. pressure sensor on grease lines
Machine consisting of: 2 needle boards and 1 “dummy” board – 8000 needles/linear meter, approximately 1640 brushes with bristle height of 20 mm, 980 rpm, and max conveyor speed of 5.6 m/min and max draw-off roller speed 6 m/min, main motor of 34.5 kW.
Electrical controls (new in 2021) consisting of 4 HMI screens;
1. Main Screen: eccentric speed (spm), brush conveyor speed (m/min), draw-off roller speed (m/min), penetration depth (mm), gap (mm), stitch density (cm*cm), run time.
2. Adjustment Screen: auto-penetration depth (mm), auto-gap depth (mm), manual penetration depth (mm), manual gap depth (mm).
3. Grease System: automatic grease time intervals, manual grease system.
4. Brush Cleaning Mode: automatic cleaning time, manual setup of cleaning process.
AA22/060924/
Dilo Needling Equipment
Quantity: 2, Year: 1989, Type: SKE, Width: 250mm, Capacity: approximately 420 pieces/hour waddings for 420 pairs of shoulder pads, depending on size. Automatic ejector, base material max 250 mm width, ingoing roll dia – max 500 mm. Consolidating of wadding by 1 needle board with max 500 felting needles.
AA22/060924/
Dilo Needling Equipment
Quantity: 1, Year: 1989, Type: SKR, Width: 900mm, Capacity: approximately1800 pairs/hour at 9 mm advance and a medium pad size. Frequency adjusted pneumatic ejector mechanism. 2925 needles, inserted in one needle board type ALPA with a lateral distance of 4 mm, stroke 60 mm, stroke frequency max 500/min, penetration depth max 22 mm, adjustable stroke advance from 6-19 mm, infinitely adjustable gear drive 1.5 kW.
AG47/220524E/ROI.L-RL.L/M/
Needling line
Quantity: 1, Year: 1994-2015, ww: 2.7 m, Consisting of:
1 FOR Minicard double doffer card, yoc: 2003, ww. 2.5 m, up to 400 kg/h
1 Tomes cross-lapper, yoc: 2003, input: 2.7 m, output: 3.8 m, up to 65 m/min
1 Automatex PR30/TBF pre-needle loom, with batt feeding system, yoc: 1994 – refurbished in 2022, ww: 2.7 m, single board downstroke, single board upstroke, stroke: 70 mm, 1 100 rpm
1 double cylinder thermobonding calender, yoc: 2015, ww: 3.3 m
1 cooling calender, yoc: 2015, ww: 3.3 m
1 Heuer cutting and winding unit, ww: 3.3 m
AA22/060924/
Dilo Finishing Needle Loom
Quantity: 1, Year: 2004/2013 , Type: Di-Loom OD-II HSC 12.5 , Width: 1250mm
including Dilo feeding system by a pair of polished feeding rollers, free-standing frame. Pressure roller pneumatically operated for easy threading of material and fine adjustment of the nip. Driven by 1*AC-S gear motor.
01*Hyperpunch OD-II HSC 12.5 special needle loom with elliptical needle beam kinematics for light weigh felts and highest throughput speed, needle beam made of carbon fiber reinforced composite material, installed on vibration dampers.
Application: light weigh felt – extremely high throughput speed
Needling system: from top – by 2*needle boards, needle beam moves vertically or horizontally
Max working width: 1250 mm
width of needle boards: 200 mm
number of needles: 2*6667 needles per linear meter
vertical needle stroke: 30 mm
horizontal needle stroke: 10 mm
max stroke: 2600 strokes/min
Material transport: by 1 pair of delivery rollers driven by 1*AC-S-gear motor
Automatic central lubrication system for eccentric and main bearings, lubricant drainer in module housing, incl pressure and temperature control of the eccentric bearings
Multi motor AC-drive for inverter operation – speed infinitely adjustable – maintenance free – reversing movement without limit switches.
Complete with SPS Siemens S7 and MP 270 PLC system.
Lab machine primarily for use at institutes, educational environments and R&D divisions for laboratory purposes and development of non-woven products. This very versatile machine can also be used for industrial purposes for small scale production of niche products.
AB34/200824/
Antonio Guasch Grano S.A. Needle Loom with New CBF
Quantity: 1
Year: 1992
Brand: Spain
Completely renovated mechanically and electronically in year 2024, April
working width: 2600 mm, needling from top
stroke: 60 mm, 1 x 3.000 needles/m
Power supply: 400 V, 50 Hz, installed power: 11 kW;
working speed: up to 800 rpm
controlled by inverter, input belt conveyor, needle plates leaded by sleeves (very practical solution)
very simple (means: trouble-free) eccentric motion transmission, spare needle plate.
The machine has been renewed recently: new bearings, new sleeves new shaft, new plates etc., practically the entire machine is new, only the frame is old.
Just switch on and work. Machines of the type are highly praised by our customers.
Excellent technical solutions – as simple as possible, thus very effective, durable / almost flawless in comparison with solutions of other European manufacturers.