Quantity: 1, Year: 2003, mod. SF/100-2S- 54 HT, Temperature 138°C. Capacity 200 kgs. 2 ropes, 3 vats, Termoelettronica electrical panel updated in 2007, without Programmator.

Quantity: 1, Year: 2010, Mod. CELSIUS 143, High temperature, Nominal width 3600 mm, working width 3400 mm. max roll diameter 1275 mm. Minimum working temp. 5°C, maximum working temperature 140° C. Autoclave volume 19,5 Mc.

Quantity: 1, Year: 2003, 4 H.T. (600 kg), with big tank, automatised with Termoeletronica

Quantity: 1, Year: 2008, Type: Eco-Soft TRD 140-3

Quantity: 1, Year: 2006, Type: Eco-Soft TRD 140-3

Quantity: 1, Year: 2004, Type: Eco-Soft 140-1

Quantity: 2, Year: 2003, Type: Eco-Soft TRD 140-2

Quantity: 3, Year: 2002, Type: Eco-Soft 140-1

Quantity: 2, Year: 2001, Type: Eco-Soft 140-1.

Quantity: 1, Year: 1999, Type: Eco-Soft 140-1.

Quantity: 1, Year: 1998, Type: Eco-Soft 140-1, With paint kitchen and pH-Unit.

Quantity: 1, Year: 2020, MCS Officina Meccanica (Italy) type Kappa 1K100.
HT rope dyeing machine, one tank, one strip in the tank, input approx. 150 kg, tank capacity 3380 l, pressure 3 bar, temperature 144 °C, computer control.

Year: 2016
Consisting of:
1x Paint kitchen
2x Dynamica EF 2 J HT dyeing devices
1x Dynamica EF 1 J HT dyeing apparatus

Quantity: 1, Year: 2015, Type: DYN 1XJ-EF HT vertical model, One tank, load approx. 250 kg, tank capacity 8200 l, pressure 3 bar, temperature 144 ° C, computer control, bath concentration 1: 3: 5.

Quantity: 1, Year: 1989, Nominal width 200 cm, working width 180 cm
Speed 5-100 m/min, Including :
– 1 Foulard Type MATEX-COLOR, 2 cylinders
– 2 Infrared pre-dryers Type VTG/3M
– 1 HOTFLUE Type THERMEX B-B-B-B

QUANTITY: 1, YEAR: 2013, CAPACITY: 400KG, 2 TUBES 200 KG PER TUBE, TYPE DYN EF 2XJ HT ROUND TYPE. DESIGN PRESSURE: 3 BAR, MAX TEMP: 144ºC, MIN METAL TEMP: – 11ºC, HYDROSTATIC TEST PRESSURE 3.9 BAR. LIQUORE RATIO 5-1 WITH PROCESS CONTROLER SETEX PLC TYPE ZELLER 737 FITTED WITH CONTINUOUS FILTERING SYSTEM, WITH TWO ADD TANKS AND ONE HIGH LEVEL RESERVE TANK

QUANTITY: 1, YEAR: 2014, CAPACITY: 500KG, THIES I MASTER HIGH TEMP JET DYEING MACHINE 2 CHAMBERS 250 EACH 3.0 BAR, 140oC, 13363 LITRE CAPACITY COMPLETE WITH 2 MIXING TANKS WITH PUMPS HOT WATER STORAGE TANK. PLC CONTROLER TYPE THIES T858.

QUANTITY: 1, YEAR: 2001, CAPACITY: 450KG, TYPE MF 3J 3 TUBE ROUND TYPE, 450KG DESIGN PRESSURE: 3 BAR, MAX TEMP: 144ºC, MIN METAL TEMP: – 11ºC, HYDROSTATIC TEST PRESSURE 3.9 BAR. WITH PROCESS CONTROLER SETEX PLC TYPE ZELLER 737 LIQUORE RATIO 7-1 FITTED WITH CONTINUOUS FILTERING SYSTEM, WITH TWO ADD TANKS AND ONE HIGH LEVEL RESERVE TANK.

QUANTITY: 1, YEAR 2014, CAPACITY 400 KG.
MCS JET DYEING MACHINE YEAR 2014 TYPE FL 94 HT 2 TUBE LONG TUBE HIGH TEMP 140C 400 KG CAPACITY, SETEX 737 6878 WITH TERMOELETTRONICA PLC CONTROL PANEL. FITTED WITH CONTINUOUS FILTERING SYSTEM, WITH TWO ADD TANKS AND ONE HIGH LEVEL RESERVE TANK. LIQUOR RATIO 5-1.

QUANTITY: 1, YEAR 2014, CAPACITY 400 KG.
MCS JET DYEING MACHINE YEAR 2014 TYPE FL 94 HT 2 TUBE LONG TUBE HIGH TEMP 140C 400 KG CAPACITY, SETEX 737 6878 WITH TERMOELETTRONICA PLC CONTROL PANEL. FITTED WITH CONTINUOUS FILTERING SYSTEM, WITH TWO ADD TANKS AND ONE HIGH LEVEL RESERVE TANK. LIQUOR RATIO 5-1.

QUANTITY: 1, YEAR 2003, CAPACITY 400 KG.
MCS JET DYEING MACHINE, YEAR 2004, TYPE: FL 94 HT, 2 TUBE, LONG TUBE HIGH TEMP 144C, 400 KG CAPACITY, SETEX 737 5452 WITH TERMOELETTRONICA PLC CONTROL PANEL. FITTED WITH CONTINUOUS FILTERING SYSTEM, WITH TWO ADD TANKS AND ONE HIGH LEVEL RESERVE TANK. LIQUOR RATIO 5-1.

QUANTITY: 1, YEAR: 2013, CAPACITY 400 KG.
MCS HT JET DYEING MACHINE 2 TUBES 200 KG PER TUBE, TYPE DYN EF 2XJ HT ROUND TYPE. YEAR 2013 400 kg DESIGN PRESSURE: 3 BAR, MAX TEMP: 144ºC, MIN METAL TEMP: – 11ºC, HYDROSTATIC TEST PRESSURE 3.9 BAR. LIQUORE RATIO 5-1 WITH PROCESS CONTROLER SETEX PLC TYPE ZELLER 737 FITTED WITH CONTINUOUS FILTERING SYSTEM, WITH TWO ADD TANKS AND ONE HIGH LEVEL RESERVE TANK.

QUANTITY: 1, YEAR: 2001, CAPACITY 150 KG.
MCS TYPE MF 1J 1TUBE YEAR 2001 150 kg DESIGN PRESSURE: 3 BAR, MAX TEMP: 144ºC, MIN METAL TEMP: – 11ºC, HYDROSTATIC TEST PRESSURE 3.9 BAR. WITH TWO ADD TANKS AND ONE HIGH LEVEL RESERVE TANK LIQUORE RATIO 7-1 WITH PROCESS CONTROLER SETEX PLC TYPE ZELLER 737 CONTROL PANEL UPGRADED IN 2010.

QUANTITY: 1, YEAR 2002, CAPACITY 450 KG.
MCS TYPE MF 3J 3 TUBE ROUND TYPE YEAR 2002 450 kg DESIGN PRESSURE: 3 BAR, MAX TEMP: 144ºC, MIN METAL TEMP: – 11ºC, HYDROSTATIC TEST PRESSURE 3.9 BAR. LIQUORE RATIO 7-1 WITH PROCESS CONTROLER SETEX PLC TYPE ZELLER 737, FITTED WITH CONTINUOUS FILTERING SYSTEM, WITH TWO ADD TANKS AND ONE HIGH LEVEL RESERVE TANK.

Quantity: 1, Year: 2007, Type: TOWEL-38-4T, Capacity: 1’000kg, No of ports: 4, Max temp: 140 deg, Controller: FC 28, Nozzle size: standard overflow nozzle, Complete with 2 addition tanks.

Quantity: 1, Year: 2007, Suitable for Terry fabrics, Capacity: 750 kgs, No of ports: 3, Max temp: 140 deg, Controller: Barco Sedo 5000, Complete with 2 , addition tanks, Excellent condition.

1x RAMAULLIN DIRECT WARPER
Model BF/1250, Warping width 1400mm, Beam Frange Diameter 1250mm, Spindle Drive, Phenolic Press Roller, Disc Brakes.

1x MAYER-MASTER INDIGO DYE SLASHER RANGE
Year: 2019 Completely Rebuilt
Master Indigo-Compact Dyeing
Karl Mayer Beaming – Max Warp Width 2600mm
Rotal Sizing
Temsan High Efficiency Air & Oxidation
Roller width 1800mm
Working width 1600mm
Comprising of:
Sizing & Beaming:
1 Rotal Size Box with 2 Dip and 2 Nips
14 Mayer-Rotal Steam heated cylinders
Final drying after sizing
Karl Mayer Beaming Headstock
Model BM2600/1100
2600 mm maximum beaming width
1100 mm maximum flange diameter
Indigo Dyeing:
(1) Soda Preparation Box
With high pressure Squeeze
(2) Neutralization Boxes with Nip rollers
(1) Pre-Wash Box with High pressure Nips
(8) Indigo Dye Boxes with
Temsan Patented Forced Air Oxidation
For high efficiency dyeing, Low cost
Increased production speed
And Deeper Indigo coloration
Each box with High Pressure Squeeze Nips
(1) Indigo Dye Filter Box
(3) Wash off Rinse boxes each with
High Pressure Squeeze Nips
Total (16) Boxes
Accumulator stand for continuous running
12 Mayer-Rotal Steam Heated Cylinders
Pre-Sizing
Beam Creel:
2 Movable Beam Creels
Each 16 Beam Capacity by Master Srl
Controls:
Fully Synchronized Speed controls, Dye Circulation
Temperature and Dye flow controls
With On – Line Diagnostics at Temsan Turkey
Color & Size Kitchens:
Dye Color Kitchen with Stainless Steel Dye Mixing
And Storage Tanks
Size Kitchen with Mixing and 2 storage tanks

Quantity: 1, Year: 2004, ECO SOFT PLUS, Capacity 1000 kg, 4 ropes, Vario Nozzles, Max. temp. 130 C, Speed 50-400m/min., Controller: Thies T737XL, Reserval tank, Very good working condition.

Quantity: 3, Year: 1998-2001 ( reconditioned 2004 ), ECO SOFT PLUS, Capacity 500 kg each machine, max. temp. 130 C, Speed 50-400 m/min. 2 ropes, Vario nozzles, Reserval tank, Controller: Thies T737XL, Very good working condition.

KARL MAYER DIRECT WARPING MACHINE
Quantity: 1
Year: 2011
Ben Direct-1400-1800
1800 MM warping width
1400 MM flange diameter
With Inline Creel
360 live ends
Electric stop motion
With
(48) Aluminum Beams, 1800 MM x 1400 MM

Karl Mayer Slasher Dye Range
Quantity: 1
Year: 2011
Model IOM-S-1-2-6-3
Comprised of:
Beam Creel
3 Preparation Boxes
6 Indigo Dye Boxes
3 Wash / Rinse Boxes,
1 Double Dip Size Box with
2.6 meter wide Beaming Headway
In detail as follow:
A. (1) 3-ton electric overhead crane, 50’ long, with a 20’ span
B. (2) 14-Beam Creels, 54” x 72” beams with braking system
C. 2-meter tension device
D. Pretreatment Stainless Steel Wash Box, 2 meters wide, type D100, with a nip stand, rubber/rubber, 5-ton pressure
E. Accumulator, with 4 top expander rolls, 5 bottom rolls
F. Wash Neutralization Stainless Steel Wash Box, 2 meters wide, type D240, with a nip stand, rubber/rubber, 5-ton pressure, expander roll
G. Wash Chemical Neutralization Stainless Steel Wash Box, 2 meters wide, type D240, with a nip stand, rubber/rubber, 5-ton pressure, expander roll
H. Indigo Sulfur Oxidation Stainless Steel Wash Box, 2 meters wide, type D400, with a nip stand, rubber/rubber, 5-ton pressure
I. Accumulator, with 7 top rolls, 8 bottom rolls
J. Stainless Steel Wash Box, 2 meters wide, type D240, with a nip stand, rubber/rubber, 5-ton pressure
K. Accumulator, with 7 top rolls, 8 bottom rolls
L. Stainless Steel Wash Box, 2 meters wide, type D440, with a nip stand, rubber/rubber, 5-ton pressure
M. Accumulator with 7 top and 8 bottom rolls
N. Stainless Steel Wash Box, 2 meters wide, type D440, with a nip stand, rubber/rubber, 5-ton pressure
O. Accumulator with 7 top and 8 bottom rolls
P. Stainless Steel Wash Box, 2 meters wide, type D440, with a nip stand, rubber/rubber, 5-ton pressure”
Q. Accumulator with 7 top and 8 bottom rolls
R. Stainless Steel Wash Box, 2 meters wide, type D490, with a nip stand, rubber/rubber, 5-ton pressure”
S. Accumulator with 7 top and 8 bottom rolls
T. Stainless Steel Wash Box, 2 meters wide, type D600, with a nip stand, rubber/rubber, 5-ton pressure
U. (6) Pre-dryer Cans
V. Stainless Steel Wash Box, 2 meters wide, type D620, with a nip stand, rubber/rubber, 5-ton pressure
W. Stainless Steel Wash Box, 2 meters wide, type D640, with a nip stand, rubber/rubber, 5-ton pressure
X. (1) Karl Mayer Double Dip, Double Nip Size Box, 2 meters wide
Y. (11) Horizontal Dry Cans, 78” x 30” diameter, steam heated
Z. Accumulator, with 22 top rolls, 23 bottom rolls

With:
10’ Section of Burst Rod to separate the ends of the warp yarn
Slasher Headway, Size-O-Matic, type BME-2600/1100, 118” delivery roll, will take a 43” diameter loom beam, takes the dyed yarn onto loom beams
Slasher Control Panel
(1) 2,000 Liter Stainless Steel Single Wall Vertical Tank, Flat Top, Dished Bottom, 1’’ Center Bottom Outlet
(1) 1,000 Liter Stainless Steel Single Wall Vertical Tank, Flat Top, Dished Bottom, 1’’ Center Bottom Outlet
(1) 1,200 Liter Stainless Steel Jacketed Vertical Mix Tank, Flat Top, Sloped Bottom, 1-1/2’’ Side Bottom Outlet with Top Mounted Agitator
(1) 1,500 Liter Stainless Steel Jacketed Vertical Mix Tank, Flat Top, Sloped Bottom, 1-1/2’’ Side Bottom Outlet with Top Mounted Agitator”
10 ft. x 60 ft. Stainless Steel Work Platform with Stairs

Quantity: 2, Year: 2004-2006, 900 kg (coupled 450 + 450 kg) H.T., automatized with Termoelectronica.

Quantity: 1, Year: 2010, 500 m (coupled), L.T., for silk, automatized with Termoelectronica.

Quantity: 1, Year: 1998, TYPE VGC
Ctrs requirement: 5 or 6 x 40′ HQ

Quantity: 2, Year: 2007 / 2008, Type: TOWEL-38-1T
Capacity: 250kg, No of ports: 1
Max temp: 140 deg, Complete with 2 addition tanks

Quantity: 1, Year 2022 (new), Roller width 2200 mm, Maximum fabric width 2000 mm, Batch diameter max 500 mm.

Quantity: 1, Year: 2000, Brand: MCS / Italy, Model: MF-2 . H.T., Capacity: 150 Kgs.

Quantity: 1, Year: 2000, Brand: MCS / Italy, Model: MF-4 . H.T. Capacity: 300 Kgs.

Quantity: 1, Year: 1999, Model: MF-4J. H.T. Capacity: 450 Kgs