Quantity: 1, Year: 2015, Type OPTIMAX-8-R-360, Working width 3600mm.
Gripper-system on guided hooks, with electronic dobby STAUBLI type S3020/C4 CAN, 20 levers installed (=full); equipped with : 8 weft colors, SUMO, 2 x ELO, ETU, ground and upper beam construction, 8 weft accumulators IRO LUNA X3, feeder support, 2 bobbin creels, weft detector 8 colors, ground warp tension roll diameter 140mm with whip roll diameter 140mm, pile tension roll with 2nd guiding roll, double warp detection GROB with each 2 warp stop detection bars, 14 heald frames GTP Alu Power 124 DRC30 13”C, healds and droppers as on the loom, electronic weft cutter, Elsy LHS + RHS, waste cutter LHS+CENTRAL+RHS, pinned take-up rolls left and right + pinned take-up roll full width (in wood box), ground warp beam Ø 800mm, pile warp beam Ø 1000mm, waste-system with dustbin, Interactive touchscreen PD15, internal cloth roller drive with cloth roller, DEMO-LOOM.

Quantity: 1, Year: 09/2010, Working width 2800mm, 4 colours.
With jacquard STAUBLI type CX880 serial number 07510/01 year of construction 1997, format 1408, 1344 hooks installed. Equipped with : SUMO, ELO, ETU, 4 weft colours, 4 weft feeders PICANOL type 1131CanPlus with PFL and balloon breaker, feeder stand, bobbin creel, double warp tension rolls Ø 140mm with springs RHS + LHS, single pressure roll, E-leno RHS + LHS, STAUBLI harness year of construction 2018 serial number W/18/0003099/H/001, warp beam position 13, warp detection GROB with 6 detection bars, droppers, melt cutters RHS+LHS, touchscreen, walking step, waste-system with suction waste motor, Eldec, cardan axe, controller STAUBLI JC7 (year of construction 2019), 176 modules M6, single gantry , foreseen for warp beam T280 but without warp beam T280, foreseen for external batching motion but without external batching motion, speed 750 TPM.

Quantity: 1, Year: 2012, Working width: 5400 mm, 4 colours, electronic dobby STAUBLI type 2622B 12 levers installed, Controlled positive rapier GPG.
Equipped with : SUMO, ELO RHS+LHS (prepared for split beam, but without gear LHS and without mid support), ETU, 4 QS colours, creel with bobbin switch sensor for 4 bobbins, feeder support, 4 feeders IRO Type XD X3 with PFL, 10 heald frames XLF xtra Light 152 DRC30 13”, GROB detection with 6 warp stop motion bars, single warp beam Q4 Ø 800mm (warp tube diameter 270mm), Direct Warp Control type backrest, warp beam position 14, 1 heavy & 1 standard pressure roll, ELSY L & R, touchscreen ID3-3, 3 steps, waste system RHS&LHS with 2 aspiration motors, external batching motion NEUENHAUSER Type DW 3133 LXT (WOB 5500).

Quantity: 60
48x Airjet Tappet: Year: 2001, Width: 380 cm/150 inches, CAM Box: 1661, No. of Levers: 6.
12x Airjet Dobby: Year: 2000, Width: 340 cm/134 inches, CAM Box: 2861, No. of Levers: 16.

Quantity: 1, Year: 12/2015, Type OPTIMAX I-4-R-540, ww 540 cm.
For coating fabrics, tarpaulin, filter, conveyor belt fabrics, etc.
With GPG positive rapier system.
Staubli dobby, type 2622, 12 levers installed.
Driven LENO L+R (ELSY), Driven scissors L+R, 3 feeders, IRO XD X3, 8 heddle frames.
4 half warp beams Ø 1000 mm.
With Cedima big roll batcher, with anti occilation device/traverse motion.
Mech. Speed 280 rpm.
Status: Warehouse.
Running on multifilament fabric (can also work with PP tape for primary backing).
The loom is as new: exceptional little running hours (as new).
Guaranteed available, and from first hand owner.

Quantity: 24

Consisting of:
12x Model OMNI
280cm Weaving Width, Year 2000, Staubli Cam Motion Model 1600B, 6 Levers Installed, 2 Colors, Clutch Motor Drive, Single Beam, Cloth Roller, (4) with Side Tuckers, (8) with Leno selvedges, Each with: 1.5 Warp Beams, 1.5 Cloth Rollers, 4 Harness Frames.

4x Model OMINI Plus
280cm Weaving Width, Year 2001, Staubli Cam Motion Model 1651/1661, 6 Levers Installed, 2 Colors, Sumo Motor Drive, Single Beam, Cloth Roller, With Side Tuckers, Each with: 1.5 Warp Beams, 1.5 Cloth Rollers, 4 Harness Frames.

8x Model OMINI Plus
340cm Weaving Width, Year 2001, Staubli Cam Motion Model 1651/1661, 6 Levers Installed, 2 Colors, Sumo Motor Drive, Single Beam, Cloth Roller, Leno Selvedges, Each with: 1.5 Warp Beams, 1.5 Cloth Rollers, 4 Harness Frames.

Quantity: ‎15, Year: 11/2020, working ‎width 3800mm, 4 colours
Positive outside cam motion Staubli Type 1692 Frame up to 8 ‎harnesses, equipped with 8 drive levers and 8 cams
Electro-mechanical independent colour ‎selector
with 4 presenters Bigstep – monitored by microprocessor.
Each : 4 prewinder heads IRO ‎Chrono X3, 8 heald frames DRC30
guided hooks, Sumo, for warp beams flanges Ø 1000mm, ‎electronic let off, TSF, ETU, Electrical
Grob type KFW 5601 – pitch 25 mm for max. 6 ‎electrodes, with batching motion PBM3-C-380. ‎

Quantity: 18
Year 2011 ~ 3 sets
Year 2010 ~ 6 sets
Year 2009 ~ 5 sets
Year 2006 ~ 4 sets
Width 3400 mm Staubli dobby air jet, Width 3400 mm
Staubli dobby, 4 color
2 (two) pcs back rest roller for heavy fabric weaving, 16 lever installed, 12 heald frame
04 weft accumulator, 1.5 warp beam, 1.5 cloth roll, 5,000 heddle wire/dropper wire, Excellent running condition

Quantity : 1, Year: 09/2010, working width 2800mm, 4 colours, electronic STAUBLI dobby type 2881, 16 levers installed. Equipped with : SUMO, ELO, ETU, PRA, AIRMASTER, 4 weft colours, 4 weft feeders PICANOL type 1131-X2 with PFL and balloon breaker, 1 feeder stand, 1 bobbin creel with 4 bobbin switch sensors, double warp tension rolls Ø 140mm with springs RHS + LHS, E-Leno RHS + LHS, Elsy RHS, 8 heald frames SCHMEING INTSTAR 750+ DRC30 13″-type, warp beam position 13, warp stop motion GROB, 6 warp detection bars, 5000 healds, 5000 droppers, electrical waste cutter R, thermical cutters RHS + LHS, thermical unit, warp beam Ø 1000mm, touchscreen (with USB), walking step, waste-system with dustbin, LDEC, cloth roll driving system, cloth roller, max. speed loom 750 Rpm.

Quantity: 54

Picanol Omni Plus 800-2-P, 280cm Air Jet Looms
Quantity: 48, Year: (24x 2012, 6x 2013, 18x 2015), 2 accumulators, 6 heald frames, 1 warp beam and cloth roller, Staubli 1681 e2* DRC*.

Picanol Omni Plus summum-2-P 280cm Air Jet Looms
Quantity: 6, Year: 2016, 2 accumulators, 6 heald frames, 1 warp beam and cloth roller, Staubli 1681 e2* DRC*.

Quantity: 16, Year: 2010,2011, Width: 340 cm.
10 sets: 6 color, staubli dobby LX5120, 5 weft sensor, beam and roller 1:1 with hardness, which is almost new.
2 sets: 4 color, staubli LX5120, 3 weft sensor, beam and roller 1:1 with hardness, which almost new.
4 sets: 4 color, staubli LX3072, 3 weft sensor, beam and roller 1:1 with hardness, which almost new.

Quantity: 11, Year: 2020, Working width: 3400 mm, Type: OmniPlus-I (ABB0100-F-4-R-340), 4 colours, electronic STAUBLI dobby type S3260 E3 16 levers installed (= full)
Equipped with: SUMO, ELO for RHS+LHS for twin beam, ETU, AIRMASTER, 4 weft colours, 4 weft feeders PICANOL BLUE 11 EasySet with PFL and balloon breaker, feeder stand, bobbin creel, double warp tension rolls Ø 140mm with easing motion RHS + LHS, double pressure rolls, E-leno RHS + LHS, Elsy Plus RHS, 4 heald frames STEEL HEDDLE Hybrid Power 151 DRC30 13″ type C, warp stop motion KASUGA / GROB with 6 detection bars, 5000 healds, 5000 droppers, melt cutters RHS+LHS, Blue Touch display, Blue Box (= Ldec), walking step, waste-system with dustbin, foreseen for split beams but without split beams, foreseen for external batching motion but without external batching motion.

Quantity: 1, With S3020-20, WB805/1000, With pneumatical pile backrest, With a needle roller with central bearing but also including the original needle roller. The loom has always and only been in R&D and has less than 200.00 0picks.

Quantity: 4, Year: 2010, Working width: 4000 mm, 4 colours, Electronic STAUBLI dobby type 2881 for max. 16 levers but 15 levers installed.
Equipped with : SUMO, ELO for RHS+LHS twin beam, ETU, 2 weft colours installed, 2 weft feeders PICANOL type 1131CanPlus with PFL and balloon breaker, feeder stand, bobbin creel, double warp tension rolls Ø 140mm with springs RHS + LHS, double pressure rolls, E-leno RHS + LHS, Elsy Plus RHS, 8 heald frames STEEL HEDDLE Hybrid Power 151/158 DRC30 13″ type C, 5000 healds, warp beam position 13, warp detection KASUGA / GROB with 6 detection bars + 5000 droppers, melt cutters RHS+LHS, display, walking step, waste-system with suction waste motor, maximum speed 650 TPM, Eldec, foreseen for twin beam but without beams, foreseen for external batching motion but without the batcher.

Quantity: 2, Year: 06/2006 , working width 4000mm, 4 colours, Electronic STAUBLI dobby type 2881 for max. 16 levers but 15 levers installed.
Equipped with : SUMO, ELO for RHS+LHS twin beam, ETU, 2 weft colours, 2 weft feeders PICANOL type 1131CanPlus with PFL and balloon breaker, feeder stand, bobbin creel, double warp tension rolls Ø 140mm with springs RHS + LHS, double pressure rolls, E-leno RHS + LHS, Elsy Plus RHS, 8 heald frames STEEL HEDDLE Hybrid Power 151/158 DRC30 13″ type C – warp beam position 13, warp detection KASUGA / GROB with 6 detection bars, 5000 healds, melt cutters RHS+LHS, display, walking step, waste-system with dustbin, foreseen for twin beam but without twin beam, foreseen for external batching motion but without external batching motion.

Quantity: 5, Year: 2007, Type Optimax 8J, equipped with Staubli Jacquards
working width: 340 cm, The Staubli jacquard units are as follows:

3 x Type LX1602B, format: 3072, Year: 2006, incl. harness, controller JC6

2 x Type LX1600B, format: 3072, incl. harness, controller JC5

Accessories per loom:
8 weft feeders with stand and control box, 2 full warp beams,1 batching motion with control table

Without gantry. Machines are in working condition

Quantity: 28, Year: 2007, Width 400cm, Staubli 2861B dobby, heald frames 8 pcs, 4 nozzles, 3 weft feeders, 1 beam/cloth roller, Running in the mill floor.

Quantity: 20, Year: 2007, Width: 340cm , 2 jet dobby , heald frame 10pcs , 2861 B dobby the roller and beam 1:1

Quantity: 2 , Year: 2015, Width: 3,60M
Equipped with:
6 Colours , Electronic Dobby STAUBLI S3020 with 20 levers , 16 Heald Frames
4 Weft Feeders IRO CHRONO X3 , 1,5 Upper Beam, Diameter 1000mm
1,5 Down Beam, Diameter 800mm, 1,5 Cloth Roller , 5500 Droppers & Healders