AH42/070623/
Cosmat Sectional Warper
Quantity: 1, Year: 2000, “UNI-30”, W:2200
ELECTRONIC CREEL, 320 BOBBINS, Year 2000
AH42/070623/
Benninger Bromas Sectional Warper
Quantity: 1, Year: 2006, “VERSOMAT”, W:3600, THE CREEL IS NOT AVAILABLE.
AH42/070623/
Hacoba Sectional Warper
QUANTITY: 1, YEAR: 1997, W: 4200, TYPE: USK-TPC1000. (CREEL AND REED ARE NOT AVAILABLE)
AH42/070623/
Karl Mayer ROB-O-MATIC Sectional Warper
QUANTITY: 1, YEAR: 2002, W:2200 + CREEL 288 BOBBINS
AH42/070623/
Benninger BEN-MATIC Sectional Warper
QUANTITY: 1, YEAR: 1999, W: 2200, + BENNINGER CREEL GFP 180+180 BOBBINS, YEAR: 2005
AH42/070623/
Benninger BEN-SUPERTRONIC Sectional Warper
Quantity: 1, Year: 1998, W:3400 , N°1 BENNINGER FIXED CREEL “BEN-CREEL” Year 1998, 800 BOBBINS (400+400), GAUGE 27CM, 5 TROLLEYS
AG52/280523/BS/
Sucker Muller Warp Sizing Machine
Quantity: 1, Year: 2000, Model: Hacoba, Roll flange diameter (mm): 1000.
Creel model: Dupla, Total position: 14, Starch box: 2, Presser width (mm): 2000, Quantity of dry cilinders: 12-Dry cilindes, Speed (m/min): 45
Creel sizing machine 2, Year: 2000, Total position: 20, Starch box: 1, Presser width (mm): 220, Quantity of dry cilinders: 10, Speed (m/min): 70
AB51/260523/
Benninger Sectional Warping
Quantity: 1, Year: 1996, mod. SUPERTRONIC, With parallel creel Benninger, positions 780.
AE64/190523/
BENNINGER Sectional Warper
Quantity: 1, Year: 1997, Mod. BENMATIC, working width 2200 mm
cone 1:8 / 1450, leasing reed Bensplit,
beaming unit with waxing device and pressing roller.
BENNINGER Creel 320 positions head-tail, 8 floors,
horizontal pitch 540 mm, vertical pitch 240 mm.
Visible machine in operation, ready for delivery.

AH42/220423/
BENNINGER SECTIONAL WARPER “BEN-MATIC”
QUANTITY: 1, YEAR: 1998, W:2400, BENNINGER CREEL “BEN-CREEL”, 560 BOBBINS, GAUGE 27CM, YEAR 1998.
AB46/130423D/SO-AC/F/BF/
Karl Mayer Sectional Warpers
Karl Mayer Sectional Warper
Quantity: 1, Year: 2002, Model: ROB 2200, Working width 220cm
With Omicron SYSDRIVE Inverter 400 V
Karl Mayer KAMCOS touch screen control
Automatic entry lease system, Woertz lease tape system
Creel GWSP 640 with 12+2 bobbin dollies , 6+1 needed for one set
Consisting of 6 dollies with 96 positions + 1dolly with 64 positions = 640 positions max. total
Disc brake system Karl Mayer adjustable, Electronic stop motion, set up for 800 mm warp flanges
Karl Mayer Sectional Warper
Quantity: 1, Year: 1999, Model: ROB , Working width 220cm
With Omicron SYSDRIVE Inverter 400V
Karl Mayer touch screen control
Automatic entry lease system, Woertz lease tape system
Creel GWSP 640 with 12+2 bobbin dollies, 6+1 needed for one set
Consisting of 6 dollies with 96 positions each + 1dolly with 64 positions = 640 positions max. total
Disc brake system Karl Mayer adjustable, Electronic stop motion, Set up for 800 mm warp flanges
AA41/101222E/RS-Y/F/
VTA Sectional Warper H420 RS
Quantity: 1, Year: 1999 , Number of Spindles: 660 bobbins , Speed: 800 r/min, Bobbinlength: conus 1700 x 260 mm mm, Miscellaneous beam diameter 1000 mm , Width: 2000 mm, Creel: included , Voltage 380 V V
AB46/240323/
Karl Mayer O-Matic Sectional Warper
Width 360 cm. Suitable for fine and coarse yarn, Suitable for technical and normal application, Headstock robust frame structure, Suitable for 1000 mm. Beam diameter
Waxing/oiling device.
1st. Creel Type: GW 720:
Year: 1998, 336 ends, With balloon breaker, Universal Tensioner, Additional Feeding roller – S wrap.
2nd Creel Type: GM 336:
Year: 1998, Magazine creel, 336 ends, With balloon breaker, Universal tensioner, Suitable for glass roving, Additional Feeding Roller – S wrap.
AB08/100323/
KARL MAYER BEAMING MACHINE WITH CREEL
KARL MAYER ROTAL BEAMING MACHINE (WARPER)
Quantity: 1, Year: 2006
Suitable for PP tapes
Type: BM 5600 / 1000
Max working width: 5’600mm
Max warp beam diameter: 1’016mm
Barrel diameter: 220mm
WITH
KARL MAYER CREEL
Quantity: 1, Year: 2013
Unwinding creel for processing PP tapes
Type: GAPP.5.2400.4.360.450
No of ends: 2’400
Spacing distance: horizontal 360mm / vertical 450mm
Package size: 300mm diameter / 400mm length (package weight 20kg)
AE64/080323/
Benninger Sectional Warper
Quantity: 1, Year: 1977, Mod. BENMATIC, Working width 2000 mm, Cone 1:8 / 1450, leasing reed Bensplit, Beaming unit with waxing device and pressing roller, BENNINGER Creel 320 positions head-tail, 8 floors, Horizontal pitch 540 mm, vertical pitch 240 mm.
AE64/080323E/TO-O/F/AQ/
Benninger Sectional Warper
Quantity: 1, Year: 2008, Mod. VERSOMAT, With automatic leasing, Working width 3600 mm, Without creel.
AC86/080323/
Benninger Sectional Warper
Quantity: 1, Year: 2007, Type: Versomat, h 2200 + creel of 2007 with 280+280 positions, Gauge 240mm, Machine in operation.
AH42/080323/
Benninger Sectional Warper “SUPERTRONIC”
Quantity: 1, Year: 1993, W:3400 , N°1 TAIANA FIXED CREEL YOC 1993, 800 BOBBINS (400+400) , GAUGE 27CM , 5 TROLLEYS
AA10/150223/
Benninger Sectional Warper
Quantity: 1, Year: 2003, Type BENTRONIC, Working width 3000 mm, 616 bobbin creel, With knotters.
AE64/150223E/CA-Y/F/
SUCKER MULLER HACOBA Sectional Warper
Quantity: 1, Year: 1996, Mod. KSE-R (USK-T PC), working width 250 cm
conicity 1:5, cone lenght 152 cm
beaming unit with waxing device, leasing reed
Creel 480 positions, 8 floors, horizontal pitch 51 cm, vertical pitch 24 cm (factory is working bobbins 27 cm diameter)
AH42/100223/
TAIANA SECTIONAL WARPER
Quantity: 1, Year: 2006, 400/2.5-2000″ W:2000, TAIANA CREEL “TF80 PAFC”, 720 POSITIONS, GAUGE 20CM
AH42/100223/
BENNINGER SECTIONAL WARPER “BEN-TRONIC”
QUANTITY: 1, YEAR: 2000, W:2200, BENNINGER CREEL, 384 POSITIONS, GAUGE 22CM, YEAR: 2000.
AH42/100223/
Karl Mayer Sectional Warper
Quantity: 1, Year: 2006, “GIR-O-MATIC 16 / GOM 16”, W:2250.ROTARY CREEL FOR 16 POSITIONS
AH02/260123E/AT-Y/F/AY/
Giovannelli Warper
QUANTITY: 1, YEAR: 1997, MODEL VGL4.CNL, WIDTH 240 cm, WITH CREEL GIOVANNELLI 640 POSITIONS, HORIZONTAL PITCH 32 cm, VERTICAL PITCH 24 cm.
AC83/230123E/RA.L-R/F/BY/
Sectional Warper Benninger Ergotronic
Quantity: 1, Year: 2004, Working width 2000mm, With Creel Rostoni, Year 1995, 800 positions, Gauge 200mm horizontal, 220mm vertical, In excellent condition, stopped, professionally dismantled.
AB60/230123E/LA-Y/M/BY/
Sectional Warper Benninger Versomat
Quantity: 1, Year: 2007, with creel Benninger 560 positions, Working width: 220cm, Speed 600-800 m/min, with cold sizing, in running conditions

AB60/100123E/ASI-AL/C/CE/
Karl Mayer Sectional Warper
Quantity: 1
Ordered Nov 2014, Delivered Year 2016, Installed Year 2017
Very less used, Model : ERGOTEC, ERGOTEC -M – 2200-1000, working Width 2200 mm
Maximum Warp Beam Diameter : 1000 mm
Drum Cone Height / Weight 230 / 1200 mm
Maximum Warping Speed : 1000 m/min
Maximum Sec Tension : 600 N, High Performance Creel, Type GP-D, 672 Ends, Thread Guiding System, Electronic Creel Stop Motion : FILGUARD
AA86/301222E/YS-Y/M/
Karl Mayer Sectional Warper
Quantity: 1, Year: 1997, Model BOM 2000 BAND-O-MATIC
83” on flat, 52” on neck, with programmable
control, hack reed stand, tensioning rolls, doffing section, 39” diameter
maximum loom beam, 864 end creel, disk tensioners, and electronic
stop motion
AB86/211222/
Benninger Sectional Warping BEN-ERGOTRONIC
Quantity: 1, Year: 1995, Width 2,10, Maximum warping width: 2100mm, Max width between platters: 2100mm, Maximum plate diameter: 1000mm, Warping speed: 800m/min, Winding speed: 400m/min, With 2 Creels, 320 spindles, Gauge 24cm, With 8 trolleys per creel, 5 Ladders with 8 coils per cart on each side, 80 Coils per trolley, Brake type Hydraulic double disc, Warping tension 600 N, Winding voltage 15000 N, Machine in excellent condition.
AE18/191222/
GAMATEX SECTIONAL WARPING MACHINE WIDTH 4200MM ~ NEW ARRIVAL
QUANTITY: 1, YEAR 2002, BRAND : GAMATEX, ITALY, DRUM WIDTH 5200 MM, BEAMING WIDTH : 4200 MM, NOS OF CREEL : 1400 NOS X 2 (BOTH SIDE) = 2800 CREELS, AUTO YARN BREAKAGE CONTROL
AC09/141122/
Benninger Supertronic Sectional Warper
Quantity: 1, Year : 1995, Working Width in cm : 250, No. Of Creel : 800, Creel Capacity : 800, Creel Model : H Creel, Creel Type : Turn Table, Tensioner Type : Electronic.
AB46/081122/
Benninger Supertronic Warper
Quantity: 1, Year: 1996, 340 cms, Max useful width: 340 cm.
Adjustable type, 134 1/2” on the flat x 53” on the rise, 176”W x 40” diameter maximum capacity, all steel Drum, w/Lubrication system, beam take-up, DC drive, s/n 103538-555
(1) Hack reed stand
(1) Benninger creel with reserve, magazine type, 324 live ends, 6 ends high x 27 rows long, 14” vertical spacing, 23 horizontal spacing, outside creel loading, w/ tube or cone adjustable package holders, Benninger tension, spring type, electric stop motion detector and electrotense disc tension, S/N 103539. With updated tensioner discs pressure springs and pads that support the lower tensioner disc.
Update (made by Karl Mayer) of Servomotor & Servodrive for transversal movement from Baumueller to KEB.
With A/C unit installed to keep the ERNI control module in excellent conditions
ERNI control box with updated original drives from Benninger (Karl Mayer), some spare still available.
Original DC motors for warping and beaming with annual maintenance service since purchased. Operated by Maxitron drive, with 1 spare.
The electric boards are all clean and in order.
AA20/271022/
BENNINGER Sectional Warper
Quantity: 1, Year: 1994, Type: SUPERTRONIC, with creel 320 positions, gauge 240 mm, y.o.c. 1995, working width: 2600 mm
The machine is part of a research and training center for sale where the machines were running only few hours per year for some test and trials.
They are all in condition LIKE complete NEW machines.
*AA41/171022/
Benninger Supertronic SF-P
Quantity: 1, Year: 1993, Number of Spindles: 48 (24 each side) , Miscellaneous for beams with diameter 100 cm , Width 2200 mm, Creel included , Voltage 380 V V
AD26/121022E/YCL-CI/M/AQ/
Complete Terry Weaving Plant (Picanol Terry Looms & Karl Mayer Warping & Sizing)
12x Picanol Terry Plus Air Jet Looms
Year: 2002,2003, With Staubli Jacquard, Width 260, 340, 360 cm., With staubli knotter Top matic, With 2 screw air compressors, With gantry for jacquards, With special electric-hidraulic trolley for loading /unloading big warp beams.
1x Karl Mayer Fractional Warper
Year: 2002, Width 200cm., Karl mayer creel 780 positions, System air-aspiration filter, Electric trolley for transport beams.
1x Karl Mayer Sizing
Year: 2002, Creel beams 16 positions, 1 size box with 2 set double sqeezing cylinders, 12 dryer cylinders, Beaming head for beam from 160cm.width working, to max. 400cm., beam flange diam. 125cm., With complete sizing preparation and cooking in autoclave and storage tank, With crane for movment beams , System air-aspiration filter.
AB96/101022/
Karl Mayer Warper
QUANTITY: 1, YEAR: 2003, LENGTH: 2200 MM, 12 COLORS, 12 PREFEDERS LUNA, WITH STAND CREEL.
AB46/061022/
Benninger Supertronic Sectional Warper
Quantity: 1, Year: 1993, Max width 2.2 meters , Max Beam Head flange 1,000mm
voltage 460v 60 hz 3/phase
2 creels , Each creel with 480 cone capacity, spacing of package
270 mm horizontal and 270 mm vertical.
Including New Cherokee over head cleaning system on both creels.
Dimensions of 2 creels to front of warper 37 feet length and 22 feet width.
AB46/061022/
Benninger Sectional Warper
Quantity: 1, Year: 8/15/1995 , Working width 400 cm,Max beam flange diameter 1,100 mm , Voltage 380 volts , 50/60 hz, With mechanical lease stand and split reed , not including a yarn creel
AB46/061022/
Karl Mayer NOV-O-Matic Short Warp Length, Sample Sectional Warper
Year 2011, Type NOM 2200, Voltage: 400v , 60 hz/3 phase, Including automatic leasing device, With the ability of using up to 10 lease separation cords for color bands separation. Including LASER band build- up control system. Maximum warp beam width 2,200 mm or 86.5 “, Maximum warp beam flange size is 800 mm. Small number of yarn packages needed for banding of small color sections, With speed capable of up to 1,000 meters per min. Includes a warp waxing device for unsized warp needs capable of 200 meters per min. In the beaming process. The creel is not included with this warper.
AG39/280922E/YA-S/M/AS/
Karl Mayer Warper
Quantity: 1, Year: 1999, 2.30 mt, Type: ROM 1, 16 colors, (8+8 direckt feed), Still running.
AA10/120922/
Benninger Sectional Warper
Quantity: 1, Year: 2001, Mod.BENTRONIC , Largeur 2200 mm., Ratio 1/5, Sizing device, With Benninger Creel 400 positions, Gauge 240 x 240 mm.