Year: 2005
Consisting of:
Befama Feeding silo
– With transport fan

Hopper feeder
– Horizontal conveyor- Spike apron- Feeding chute

Reisky&Schlese Weighting scale

Befama Carding machine
Working width: 2.500 mm- Roller feeding System- First Tambour with 2x worker/stripper- Transfer roller- Main Tambour
With 5x worker/stripper, 2x Doffer, Roller take off

Quantity: 1, Year: 1976, Italy high production card, type Gigant, ww 2.500mm, Constructed for production until 1.000kg/h by fibres 15-25dtex, Staple 40-250mm, used for semi worsted yarn, Also suitable for Non Woven products. Production for semi worsted 6-17dtex 200- 400kg/h, Volumetric feeding, breast section with 2 groups of main roller Ø 858mm, With each 2 pairs worker and stripper, traverse roller, Main cylinder Ø 1.500mm with 4 pairs worker and stripper, 2 doffer Ø 858mm, high speed fly comb, good condition, still running.

Quantity: 1, Year: 2002, ww: 3 m, Avantrain + 2 swifts, up to 450 kg/h.

Quantity: 1, Year: 1994, Type: 242, Working width: 2.500 mm, Capacity: max. 500 kg/h, Working speed: 30-140 m/min, Fibres: PES / PA 1,7 – 4 dTex 40-60 mm
Additional information:
Included:
SEW motors / gearbox motors
Control cabinet renewed in 2009 with SEW drives and with Siemens S7 PLC, Control desk
Not included:
Cables, The Machine / control cabinet was part of a nonwoven production line – modifications on the control system might be necessary.

Quantity: 1, Year: 2000, Type: CS-Mini, Ingoing width: 600mm, Outgoing width: 650mm, Small crosslapper for lab purposes, with Schneider Telemecanique variable speed controllers for asynchronous motors, PLC L689.

Quantity: 1, Year: 2011, Type: EDS-W, Width: 3500mm, Completely refurbished in 2023.
Pressurized chute-feed, similar to the Hergeth MC-W Masterchute, including also;
04 x fan typ TPA 311 – air capacity max 6000 m3/hr, with profile windows
01 x Hergeth Hollingsworth FS/5 feedbox – model 6.220, completely reconditioned in 2011 with opening roll, needle row beater with aspiration channel, feeding by blow-in hood, adaption also provided for overpressure hood.

Quantity: 1, Year: 2020, Model: CO 1500, Working width: 1500 mm, Complete with a fan and separator. Additionally, there is a main drum and a working roller in stock. The machine is in very good condition (very little used). Capacity 300kg/h, Installed power 20 KW.

Consisting of: Hopper feeder, Weighting scale, Nonwoven card – Make: Reisky & Schlese – WW: 2.500 mm – double doffer
Cross lapper – Make: Reisky & Schlese WW: 3.500 mm

Consisting of:Feeding silo – Make: Befama
Hopper feeder, Weighting scale, Carding machine – Make: Befama – WW: 2.500 mm – double doffer, Cross lapper – Make: Befama – WW: 3.000 mm

Quantity: 1, Year: 1994, Type: ELITE, Working width: input 2,8 m / output 2,9 m, Speed: 75 m/min
Additional information:Original control panel, NT transmission installed, Automat, , variators and motor changed in 2009

Quantity: 1, Year: 1996, Reconditioned: 2022, Working width: Feeding: 3,0m, Exit: 5,5m, Speed: 50 m/min, Incl. control system, cabinet and panel.

Quantity: 2, Year: 1994, Type: 225PP / Serie CA6, Including Card Feeder, Including original Thibeau coiler.

Quantity:1, Year: 1999, Ingoing width: 2500mm, Outgoing width: 2800mm, Type: Profile 500, Infeed speed: max 150 m/min.

Quantity: 1, Year: 1994 – refurbished in 2009, input: 2.8 m, output: 2.9 m, up to 75 m/min

Quantity: 1, Year: 1999, mod.R3, Width 3500 mm, TRUETZSCHLER EXACTAFEED mod.FBK 3750 year 2000, double doffer.

Hergeth Double Doffer Card:
Quantity: 1, Year:1993, ww: 3.5 m, Avantrain + 1 swift, randomizing cylinders.

Autefa CL 2003 Cross Lapper:
Quantity: 1, Year:1993, Input: 3.5 m, output: 7 m, up to 80 m/min.

Quantity: 1, Year: 1998, Type: Injection card, Width: 3500mm, Complete with Trützschler MS191 feeder, LVSA 375 condenser and FBK 536 chute feed.
Composed as follows: feed plate/sheet with two pressing rollers (one with active metal detection alarm), feed roller, lickerin, 1st main cylinder with 5 workers/strippers, top and bottom intermediate doffers, top and bottom transfer cylinders, 2nd main cylinder with 7 workers, exit in double doffers with take-off cylinders and brush roller.
Also including a Prött card suction filter unit. Max carding capacity about 950 kg/hr with coarse fiber and 550 kg/hr with fine fiber. Was running mainly polyester 10 decitex.

Bonino Single Doffer Card
Quantity: 1, Year: 1980, ww: 2.5 m

Tecnica Tessile cross-lapper
input: 2.5 m, output: 4.2 m

Bonino Single Doffer Card
Quantity: 1, Year: 1986, ww: 2.8 m

Tecnica Tessile cross-lapper
Quantity: 1, Year: 1986, input: 3 m, output: 4.2 m

Bonino single doffer card
Quantity: 1, Year: 2014, ww: 2.5 m, avantrain + 2 swifts, condensing cylinder

Technoplants cross-lapper
Quantity: 1, Year: 2014, input: 2.5 m, output: 5.5 m, up to 50 m/min

FOR Single Doffer Card
Quantity: 1
Year: 1995, ww: 2.5 m, avantrain + 2 swifts

Cormatex cross-lapper
Quantity: 1, Year: 1995, input: 2.5 m, output: 4 m

HDB Single Doffer Card
Quantity: 1, Year: 1974, ww: 2.5 m, pre-avantrain, avantrain, 1 swift

Cross-lapper
Quantity: 1, input: 2.5 m, output: 3.5 m

Bonino Double Doffer Card
Quantity: 1, Year: 1990, ww: 2.5 m, 1 swift, condensing cylinder

Tecnica Tessile cross-lapper
Quantity: 1, Year: 1990, input: 2.5 m, output: 3.3 m, up to 45 m/min

Bonino Single Doffer Card
Quantity: 1, Year: 1985, ww: 2.5 m

Tecnica Tessile cross-lapper
Quantity: 1, Year: 1985, input: 2.5 m, output: 3.2 m

Thibeau Double Doffer Card
Year: 1986, ww: 2.5 m, avantrain + 2 swifts

Asselin T380 Cross-lapper
Quantity: 1, Year: 1986, input: 2.7 m, output: 3 m

Thibeau Souble Doffer Card
Quantity: 1
Year: 1986
ww: 2.5 m, avantrain + 2 swifts

Asselin cross-lapper
Quantity: 1, Year: 1991, input: 2.7 m, output: 3 m

Thibeau Souble Doffer Card
Quantity: 1, Year: 1986, ww: 2.5 m, avantrain + 1 swift

Asselin T360 cross-lapper
Quantity: 1, Year: 1986, input: 2.7 m, output: 3 m

Quantity: 1, Year: 1985, ww: 2.5 m, avantrain + 1 swift, up to 250 kg/h
+ 1 MTV cross-lapper, yoc: 2002, input: 2.8 m, output: 2.7 m, up to 60 m/min

Spinnbau Double Doffer Card:
Quantity: 1, Year: 1986, ww: 2.5 m, Avantrain + 1 swift, randomizing cylinders, up to 400 kg/h.

Autefa cross-lapper:
Quantity: 1, Year: 1986, Input: 2.5 m, output: 3.5 m.

Quantity: 1, Year: 1990s, ww: 2.2 m, 2 swifts

Quantity: 1, Year: 1990s, ww: 2.2 m, 2 swifts.

Quantity: 1, Year: 1980s – control and electrical panel from 2023, Input: 2.8 m, output: 3.8 m.

Quantity: 1, Year: 1990s, ww: 2.5 m, avantrain + swifts, up to 350 kg/h

Quantity: 2, Year: 1998, Type: ALW , Width: 2500mm
with aerodynamic Turbo unit take-off and Trützschler FBK 536 chute-feed.
Consisting of:
Infeed with pre-roller, breast section with 1 worker/stripper and transfer doffer, main swift – dia 1050 mm with 5 workers/strippers and randomizing roller – dia 550 mm, take-off by aerodynamic Turbo-roller – dia 550 mm.

Quantity: 1, Year: 2000, ww: 1.1 m.

Quantity: 1, Year: 1980, ww: 1.1 m.

Quantity: 1, Year: 2000, ww: 1.33 m.

Quantity: 1, Year: 1989, Controls from 2016, Input: 2.5 m, output: 2.5 m.

Quantity: 1, Year: 1986, ww: 2.5 m, Avantrain + 1 swift, randomizing cylinders, up to 400 kg/h.

Quantity: 1, Year: 1986, Input: 2.5 m, output: 3.5 m.

Quantity: 1, Year: 1990, Input: 2.5 m, output: 3.3 m, Up to 45 m/min.

Quantity: 1, Year: 1977, ww: 1.6 m

Quantity: 1, Year: 1990, ww: 2.5 m, 1 swift, condensing cylinder