Showing 1–50 of 51 results

Show sidebar

AB46/110122D/OL-CI/F/AG/

Benninger Supertronic Warper

Quantity: 1, Year: 1996, 340 cm. Max useful width: 340 cm
Adjustable type, 134 1/2” on the flat x 53” on the rise, 176”W x 40” diameter maximum capacity, all-steel Drum, w/Lubrication system, beam take-up, DC drive,
(1) Hack reed stand
(1) Benninger creel with reserve, magazine type, 324 live ends, 6 ends high x 27 rows long, 14” vertical spacing, 23 horizontal spacing, outside creel loading, w/ tube or cone adjustable package holders, Benninger tension, spring type, electric stop motion detector and electrotense disc tension, . With updated tensioner discs pressure springs and pads that support the lower tensioner disc.
Update (made by Karl Mayer) of Servomotor & Servodrive for transversal movement from Baumueller to KEB.
With A/C unit installed to keep the ERNI control module in excellent conditions
ERNI control box with updated original drives from Benninger (Karl Mayer), some spare still available.
Original DC motors for warping and beaming with annual maintenance service since purchased. Operated by Maxitron drive, with 1 spare.
The electric boards are all clean and in order.

AE02/181221E/YT-Y/F/BY/

Karl Mayer Warping ZM-1

Quantity: 1, Year: 1996, Assembling machine Rotal Karl Mayer

AF74/301121/

Benninger Ben-Direct Warping

Quantity: 1, Year: 2002, Working width 2000 mm (reduced from 2300mm), Pleasure rollers, 38 pieces warp beam (diam.1000 mm), Benninger parallel creel, Cone capacity 624, Gauge 330 mm, Motorised disc break tensioner.

AC09/091121/

Benninger Ben Direct Direct Warper

Quantity: 1, Year: 2003, Working Width in cm : 180, Beam Dia in MM : 800, Creel Model : V CREEL, No of Creel Capacity : 648, No of Spare Creel : 648, Creel Change Type : Automatic motor, Tensioner Type : Tension less, Tension Control : Automatic.

AC09/031121/

Benninger Ben Direct Direct Warper

Quantity: 1 , Year : 1998, Model : Ben Direct, Creel Model : H CREEL, No of Creel Capacity : 504, No of Spare Creel : 1, No of Beams Supplied : 6, Tension Control : Automatic, Working Width in cm : 160, Beam Dia in MM : 1000, Creel Change Type : Manual, Tensioner Type : Pipe Swing Type

AH08/240921/AQ/

Rostoni Direct Warper

Quantity: 1, Year: 2003, Width: 2000, 2 x Creel position 1036, Beam diameter 1250mm,H type.

AH08/240921/AQ/

Karl Mayer Direct Warper

Quantity: 1, Year: 1998, Width: 2000, Creel Position 930, beam diameter 1250mm, H type.

AA41/121021E/PC-O/F/

Van De Wiele Direct Warper

Quantity: 1, Year: 2006, Voltage 380 V, 2000 mm. Machine is not working for the moment.

AE02/240821E/ARY-S/F/AN/

Karl Mayer Direct Warper PSZ

Quantity: 1, Year: 2019, working width 800-2100 mm, max. dia. 270-1000 mm, with creel 1200 positions

AB60/061021/

KARL MAYER Direct Warping

Quantity: 1, Year: 2007, Type ZM-SP1800 DNC, ‎working width 1600mm, Ø beams 1000mm, with 17 warp beams, V-creel BENNINGER year ‎of construction +/- 1998, 998 spindles, gauge 260mm,
Was originally working width 1800mm alternations were done by Karl Mayer to reduce to 1600mm
Machine has been dismantled by a professional team that can re-install world wide of course at additional charge and has now been moved to our warehouse
I want to give you some more info regarding the history of this machine.
This warper ran in terry towel mill for only a short period of time. You can see that the creel is older than the warper and that the warper is working width 1600mm. The company bought this 1800mm warper and reduced the width of the pressure roll because they kept the warp beams of 1600mm of their previous warper.
This machine is in nearly new condition with very few working hours.
The width of the machine can be brought back to 1800 mm with a new pressure roll and after removal of the spacers for the crones . Of course the beam tubes must also be changed.

AA23/200921/BY/

ELITEX Warper

Quantity: 1, Year: 1993, width1400 ; direkt warper with creel

AA23/200921/BY/

BENNIGER DIRECT WARPER

Quantity: 1, Year: 2009‎, model BEN-DIRECT 800-1800 , Width of warp beams ‎
1800 mm, Max weight of full beams ‎ 500 kg
Weight of empty beams ‎ 225 kg
Range of yarn ‎ Raw material: cotton
Range of density: 7,4-50 tex‎, Speed ‎ 800 m/min, Bobbins: formát: xc
gauge: 22 cm‎, Power installed ‎: 18 kWh, V creel model V Optostop, V-creel of 768 positions, mandrel space 215 mm, ‎electromagnetic brakes with belt

AB46/300821/AR/

Karl Mayer Direct Warper and Warp Knitting

AB46/210921D/LS-AI/F/AR/

Karl Mayer Warp Knitting machine

Quantity: 8
Year: 1x2003 , 7x2004
Type RD 6/3 - 15 gauge E 22
Voltage 480 v /3ph ,
Speed of machines: 500 - 850 RPM based on the fabric construction
Spacing 1.1545 mm , working width 1955.8 mm 77”
Double needle bar machine
With 6 yarn guide ,3 on the front and 3 on the back of the machine
4.5”Beam shaft diameter.
Producing spacer textiles fabrics 2mm to 15 mm thickness
Additional pattern chains in spare parts
Used for Shoe, Mattress,Seats and Chairs.

AB46/210921D/CS-Y/F/AR/

Karl Mayer - Direct Warper 18”

Quantity: 1
Year: 2004
Model No. DS21/30 NC-1
Speed of direct drive motor 400 rpms.
Beam Width inside Flanges 18” or 457mm
Voltage 480v
Including original Karl Mayer S-Drive yarn tensioning unit.
Including Karl Mayer Static Eliminator
Including Karl Mayer electronic yarn monitoring system.
Warper is built with a pressure roll assembly.
Beam Chuck size 4.5 “
Capability of warping a beam flange up to 30”diameter or 762 mm.
Creel , 6 yarn packages high X 8 positions horizontal in 7 sections in length .
Spacing distance of yarn cones in creel 380 mm horizontal /380 mm vertical pitch.
Total creel length 2,338.0 cm (76.7 ‘feet) width 433cm (14.2 ‘ feet) height 276 cm (9 ‘feet)
Creel capacity for 672 total ends ends with yarn 672 tension units.

AC09/010921/

Groz Beckert Warp Master GB-WM 2400-6 Drawing In

Quantity: 1, Year: 2018, Make : Groz Beckert, Model : Warp Master GB-WM 2400-6, Working Width in cm : 240, Heddle Model : J, Max Frame : 12

AC09/230821/

Benninger Direct Warper & Benninger Ben Sizetec Sizing

1 X Benninger Direct Warper
Year : 1998, Working Width in cm : 180, Beam Dia in MM : 800, No of Creel Capacity : 784

1 X Benninger Direct Warper
Year : 2007, Working Width in cm : 180, Beam Dia in MM : 1000, No of Creel Capacity : 784

1 X Benninger Ben Sizetec Sizing
Model : Ben Sizetec, Year : 2007, Head Stock Working Width in cm : 280, Max Beam Dia Workable in mm : 1000, No of Size Box : Double, Size Box Working Width in cm : 180, No of Beam Creel : 24

sell these machines in lot

AC09/230821D/RS-Y/F/BH/

Benninger Ben Direct Direct Warper

Benninger Ben Direct Direct Warper
Quantity: 1
Year : 2001
Working Width in cm : 180
Beam Dia in MM : 1000
Creel Model : V CREEL
No of Creel Capacity : 648
No of Spare Creel : 648
Creel Change Type : Automatic motor
Tensioner Type : Tension less
Tension Control : Automatic

Benninger Ben Direct Direct Warper
Quantit: 1
Year : 2003
Working Width in cm : 180
Beam Dia in MM : 800
Creel Model : V CREEL
No of Creel Capacity : 720
No of Spare Creel : 720
Creel Change Type : Automatic motor
Tensioner Type : Tension less
Tension Control : Automatic

Status : Stopped

AA23/260721E/RT-P/F/AZ/

Benninger Direct Warper

Quantity: 1, Year: 1995, Type: A 14.418 , 340 cm w.width, Creel for 1200 pos. , Power 40 KW.
NOTES: Requires 3×40′ Ctrs for shipment

AA41/110521E/PR-P/M/

Van De Wiele Warper

Quantity: 1, Year: 2006 , 2000 mm, Voltage: 380 V V.

AA41/110521E/ATI-AL/M/

Van De Wiele Direct Warper

Quantity: 1, Year: 2006 , Type: SDB91-300, Number of Spindles: 2 creels , Voltage: 380 V V.

AA02/060521D/CLI/F/

Karl Mayer Sizing Machine & Benninger Direct Warper

1x KARL MAYER SIZING MACHINE
Model BME 2600/1000, Year 2009, 260cm Maximum Loom Width, 1000mm Maximum beam diameter, 24 Beam Creel, Section beam width 1800mm, Two Size Boxes, Each Double Dip and Double Squeeze, 12 Final Dry Cans, Moisture and Stretch Meters, Inverter control

1x KARL MAYER – BENNINGER DIRECT WARPER
Model Ben- Direct, Year 2009, 180cm warping width
With: Vee Creel 780 ends, With Automatic Cutters, Tension units and electronic broken end detectors.

24x ALUMIMUM SECTION BEAMS
180 cm x 1000 mm flange diameter

AC09/080421/

Benninger Direct Warper

Quantity: 1, Year : 1998, Working Width in cm : 180, Beam Dia in MM : 800, No of Creel Capacity : 784.

AC09/080421/

Benninger Direct Warper

Quantity: 1, Year: 2007, Working Width in cm : 180, Beam Dia in MM : 1000, No of Creel Capacity : 784.

AE69/080421/

WARPING MACHINE KARL MAYER

QUANTITY: 1, YEAR: 1999, MOD EON , WW 2300MM CREEL 336 POSITION, AC MOTORIZATION INVERTERS AND TOUCH SCREEN COMPUTER , PERFECT STILL AT WORK .

AC83/150321E/YL-R/M/CF/

Karl Mayer Direct Warper Ben-Direct Benninger

Quantity: 1, Year: 2009, Working width : 180cm, Benninger Creel Benstop for 784 bobbins, Warp beam diameter 800mm, With 20 warp beams

AE64/080221/

Ramallumin Direct Warper

Quantity: 1, Year: 1999, Working width 2000 mm, Beaming unit for flanges diam. max. 1000 mm, Creel 600 positions, 6 floors, pitch 32 x 32 cm, With automatic knotting system.
Sizing machine and 2 direct warpers are for sale in one lot, Including many warp beams, all available accessories and feeding/conduction plants.

AE64/080221/

Karl Mayer Direct Warper

Quantity: 1, Year: 2000, Working width 1600 mm, Beaming unit for flanges diam. max. 1000 mm, KARL MAYER Creel 600 positions, Working with 10 movable trucks + 8 trucks of spare, 6 floors, pitch 32 x 32 cm, With automatic knotting system and antiballoon.

*AA32/050121D/LP-P/C/BQ/

Karl Mayer Direct Warper

Quantity: 1, Year: 2008, ZM-SP Model, 1800mm, 800 creel-V creel, Excellent Working. Condition :RUNNING.NO SPARE BEAMS, ONLY WARPER

AC86/261220/

SUCKER MÜLLER HACOBA WARPING MACHINE

Quantity: 1, Year: 1997, TYPE USK – T – PC 1000. H 4.000 Mt. Beams Diameter Max 1000

AA10/021220/

Sucker Muller Hacoba Direct Warper With Sizing

Sucker Muller Hacoba Direct Warper
Quantity: 1, Year: 1997, Type NZB D 1000, Warp beam diameter 1000 mm, working width 1600 mm, speed max.1200 m/min, Creel for 576 bobbins, max bobbin diameter 300 mm.

Sucker Muller Hacoba SC Sizing
Quantity: 1, Year: 2000, Working width 1600 -3300 mm, Warp beam creel for 16 beams max. thread count 16 x 576=9216, 12 drying cylinders (8 with Teflon, 4 chromed), Pleava plant for coating control, Dry section with 15 bars, Cooking plant: 1 batch container and 1 storage container.

AB51/091020E/TA-Y/F/AQ/

Benninger Direct Warper

Quantity: 1, Year: 2007
mod. BEN DIRECT , Beam flanges 1000mm , Warp width 2000 mm , Beam Diameter 1000 mm
With 1x creel type V-Creel – 728 positions , Vertical pitch 305 mm , Horizontal pitch 240 mm, Cutting device, Balloon separatorstopped on the mill floor but still erected and connected to power, it was running cotton & blended cotton
12 spare beams included in the price, and 10 extra beams available against payment of EUR 1000/each

AA32/030920/

Benninger Direct Warper

Quantity: 1, Year: 2001, Working width – 1800 mm, Beam Dia – 1000 mm, Creel Type – V Creel, No of Ends – 588 , Current Status – Working / Running.

AF95/200720/

Karl Mayer Ben Direct Warper

Quantity: 1, Year : 2011, Working Width : 240 cm, Warp Beam Dia in mm : 1250, Maximum Speed : 1200 m/ min, Creel Model : Ben Creel, Creel Type : V Creel, Creel Positions : 730, Warp Beams : 36 pcs