AA10/170424/AP/
Gilbos Assembly Winder & ICBT 2×1 Twister
This GILBOS machine is more than an assembly winder, it is an Entangling Winder.
This machine was feeding the ICBT Twister also quoted.
AA10/050424E/YA-R/M/AP/
Gilbos Assembly Winder
Quantity: 1, Year 2001, Type DYNAJET 2, 9 spindles, Traverse 10" cylindrical, 4 end creel.
NOTE:
The factory is stopped. No more power
Still on mill floor, it is complete in all respect.
Requires 1x40' for shipment
AA10/050424E/CR-R/M/AP/
ICBT 2x1 Twister
Quantity: 1 , Year: 1995, Type CD-DT 560, 2 x 24 spindles = 48 positions, Can dia. 300 mm and height 230 mm, Feeding and delivery traverse: 10’ cylindrical, Z and S torsion , Not dismantled, stoped but conected.
AA03/210324E/AT-C/F/
Hirschburger Assembling Precision Winder
Quantity: 1, Year: 1990, Type PC300, 6 spindles, 12“ traverse, Cylindrical tubes 325 mm length, Diameter inside 72 mm, Packages until 6 kg, Automatic doffer with outstanding creel for 12 ply with 12 reserve places, Electronic sensors, 380V/3Ph/50Hz.
AB45/150324D/AP-R/F/AQ/
Saurer Assembly Winder
Quantity:1, Year: 2003, Type: HDWR, no. 12 spindles , 4 ply with sensor automatic counter, blower, 380 V 50 Hz, Delivery: immediate , Condition:Dismantled
AC86/280224/
Saurer Hamel Covering Machine With Assembly Winder
6x SAURER HAMEL TYPE 2020 EC. NUMBER 192 POSITIONS EACH. SPANDEX COVERING YARN HAMEL SAURER SPINNING MACHINE TWISTER ELASTO.
MORE 2 MACHINES TO 48 POSITIONS FOR ASSEMBLY TWISTER BY HAMEL. ALL PLANT COMPLETED .
AA10/260224E/CA-Y/M/
OMP Bodega Assembly Winder
Quantity: 1, 24 heads, run 10″, Autodoffing, 3 ends on creel.
AA10/260224E/AL-R/M/
OMM Precision Assembly Winder
Quantity: 1, Year: 2009, mod.D06 BPN , 6 heads, Independent heads, (4) tube 10″ and (2) tube 8″, lateral creel, 6 ends.
AA10/310124/
Corghi Hanks Winding
Quantity: 1, Year: 2005, mod.E, 20 heads, Run 6″, 5°57, swift 240 mm.
AA10/170723/
Saurer Hamel Covering Machine With Assembly Winder
Quantity: 1, Year: 1997, Type: 2020 EC, 216 spindles.
With 1 SAURER HAMEL Assembly winder: Year 1997, Type HD, 12 spindles.
AA02/140723/BY/
Hirschburger Doubler
Quantity: 1, Year: 1995, Type PC 300, 18 Pos. Traverse 320 mm (12”), 4 Ply, Metercounter, with Creel 72 Pos.
AB45/260523/
CORGHI Hank To Cone Winder Model” E “
Quantity: 1, Year: 1992, n. 12 heads
pitch 6″ ( 152 mm) x 5º 57′ , reel width 240 mm. , up to 1 kg. hank
reel circumference 1100 / 1800 mm.
waxing device , positive yarn over-feeder, mechanical clearers
, bottom feeding creel to allow spools or cones to use as rewinding
AB45/050123/
Doubling Machine Caipo AW-1
Quantity: 2, Year: 2000, 2001
nos. 9 spindles, Automatic doffer
Exit cone 8”, conometer, External creel for: 3 spindles 5 ply, 3 spindles 4 ply, 3 spindles 3 ply,, 380 V 50HZ, Condition: Dismantled