AE56/170125/
Monforts Sanforizing
Quantity: 1, Year: 2010, Germany origin, Width 205cm, Cylinder dia 2 meters, Rubber blanket thickness 5.5CM, Running condition.
AB51/160125/AQ/
Bruckner Stenter
Quantity: 1, Year: 1996, 7 chambers, Gas heated, Working width 2000mm , Vertical chain pin and clip, With weft straigthner BIANCO yoc 1994, Exit on fold and big roll.
AE56/130125/
Lafer Raising Machine
Quantity: 1, Year: 2015, width 200cm, Italy origin
double drum 28+28 rollers, can test running
AA02/110125D/AOR-P/M/
Texima Tenter Frame
Quantity: 1, Year: 2004, 108” (2700mm) working width, Pin / Knits, 6 Zone / 63ft. Oven, Vertical Return, Natural gas, Horizontal single pass, Mahlo VMT (control dwell time & fixing time), E + L Guiders / Spreading device, For smoothing out moving webs and unfurling edges.
Spreading device consists of; three-phase AC gearmotors, Spreading rollers with T or rounded profile, Pedestal bearing, pivoting gears, hand wheel Textima Padders.
Padder #1 Extractor Pad. Top roll driven, roll Ø 373mm, Bottom roll idle, roll Ø 383mm.
Padder #2 Processor Pad. Top roll driven, roll Ø 392mm, Bottom roll idle, roll Ø 392mm.
Mahlo weft straightener, Year: 2004, Padder, Inspection, (3) Stainless Chemical Add Tanks, (2) 100 Gallon with Lightening Mixers, (1) 50 Gallon with Lightening Mixer.
AA02/110125D/PS-Y/M/
Santex Double Pass Dryer
Quantity: 1, Year: 1994, Model Santa Shrink, 106” / 2700mm working width, 5 Zone, Natural Gas, No Weft straightener, Buggy Feed, Two roll compensator, Inclined belt feed to dryer, Rotating wooden apon, Double pass belt, return to entry, Plaiter exit to Buggy, Shinko Technos Servo Digital Controller, Model ACD 15A R/M, Power on/off, Multirange, Display, keypad operation, Standby mode, Manual mode, Alarm setting, Timer.
AG54/110125/
Salvade Steamer
Quantity: 1, Year 2015, Fabric content of 250 meters, Working height 2400 x 2200 mm, Controlled by inverters and plc.
AA02/080125/
Thermal Oil Bruckner Tenter Frame
1x BRUECKNER Tenter Frame
Year: 2014, Model Power Frame, Type VN.SFP.18/4 for flat woven fabrics, Thermal Oil Heated with circulation fans, With Brueckner Power Pad, Roller width 2000mm, Maximum working width 1800mm, Minimum working width 600mm, 4 Zones, Vertical Chain return – Star – Dur, Pin chain with cover and unpinning protection
Entry field 4.0 meter long, 4 heating Chambers each 3.0 meter long, Exit field 3.5 meter long, Max Temp 210 deg C, Min Temp 110 deg C, Speed 40 meters per min.
1x INPLAN INGENIEURTECHNIK Thermal Oil Boiler
Year: 2014, Model H.800, 930 KW, Max Temp 300 deg C, Flow rate minimum 7.2 M3/hour, Max pressure 10 Bar, Max Test Pressure 21.4 Bar, 220/480 Volts, 50/60 Hertz.
AA10/070125/
Calemard Belt Cutting Machine
Quantity: 1, Year: 1994, Type ATHENA, Width 180 cm, for hot or cold cutting, 11 knives for hot cutting and 18 knives for cold cutting.
AC93/080125/
Comet Polishing & Shearing
QUANTITY: 1, YEAR: 1990, 2.400 MM, POLISHING AND SHEARING MACHINE FOR TOWEL, 20 SHEARING SPIRALS, POL ROTOR.
AA10/070125/
Torres Shearing Line
Quantity: 1, Year: 1994
Type TAR 200, Working width 2 m (cylinders = 2m20), 3 shearing units
Exit on 1 inspection table, 2 spare shearing blocks
AA10/070125/
Comet Shearing / Thermo-tigering line
Quantity: 1
Year 2000, working width 1m80:
– 1 ORION 2001 shearing machine, 1 shearing cylinder
– 1 SIRIUS 87 Thermo-tigering machine, with suction
AA10/070125/
Salvade Calander For Thermoprinting
Quantity: 1, Year: 2019, laminating, metal application, Type COMBI 624, cylinder width: 2m40, working width: 2m10, drum diameter: 600 mm, diathermic heating
AA10/070125/
SPG Digital Printers
Quantity: 2, Year: 2019, Type JAVELLIN, width 1m85, 36 heads, with dryer
AC94/090924/BY/
Sperotto Rimar Scouring Line
Quantity: 1, Year: 2003, Type Nova 280/800 Special, 280cm working width, Unwinder, Scouring Unit, Drying Unit, Winder, Primary Distiller, Secondary Distiller, Active Carbon Filter Unit, Separate Deposit Tank (S/S), Status: In Operation.
AA10/070125/
Sucker Muller Shearing
Quantity: 1, Year: 1997, For Blanket and fake fur, Type TIGER CUT PRC 2, 2 shearing units, Width 2m60.
AE56/020125/
Arioli Loop Steamer
Quantity: 1, Year: 2014, Italy origin, Width 220cm,350 meter capicity, Gas and steam heated, High/low temperature.
AE56/311224/
Lafer Brushing / Sueding Machines
Year: 2006,2008,2009, Italy origin, 220cm working width, 6 carbon rollers, Parts complete.
AC70/181224/CX/
Salvade Steamer
Quantity: 1, Year: 2019, Type VPM500 WW220, Maximum fabric width 2.2m, roller width 2.5m, Fabric content 500m, Maximum working speed 80m/min, Fabric dwell time 5.8-50min, Maximum fabric width 2.2m, roller width 2.5m, Fabric content 500m, Maximum working speed 80m/min, Fabric dwell time 5.79-50min, average steam consumption 2000kg/h, Dual Heated steam/oil, oil super heater for high temperature consumption: 20m3/h, temperature 250c, , Operator: right hand side, Installed power 35KW, Heated oil capacity 190KW, Chamber length 11m, Entrance and exit same side, Teleservice, Infrared heating system at the machine exit, double position temperature control in the chamber , automatic system to set the fabric distance in the loop, automatic chain lubrication system, Super Wet steam temperature and control system, carrying fabric rods speed rotation and control system, steam recycle fans, automatic moistening system. Entrance/exit same side. Still connected to power and can be inspected at any time.
AB05/161224/
Monforts Stenter
Quantity: 1, Year: 2003/2004, MONFORTS MONTEX 5000 5 bay stenter, gas, pin, 2.400 mm roller width.
AB05/161224/
Bruckner Stenter
Quantity: 1, Year: 1996, 5 bay stenter, pin/clip chain, Electronic DIRECT DRIVE modified in 2008.
AB05/161224/
Bruckner Stenter
Quantity: 1, Year: 2004, 6 bay stenter, gas, clip, 3.000 mm roller width, Heatrecovery.
AC96/161224E/PSI-YI/M/
Menzel Continuous Bleaching Line
Quantity: 1, Year: 2015/2016, Upper roller width 3400 mm. Suitable for fabric width up to 3200 mm or 2 x 1.600 mm.
Comprising out of : washing, application, relaxation steamer, washing, drying compartment, high cloth feeding, entrance into J-box for interruption free production with dancing/compensator roller or deviation of the J-box, high cloth feeding with edge uncurlers make ERHARD & LEIMER type KF2020, segment roller as rotary expanding roller for even feeding make ERHARD & LEIMER type SW, entrance into 1st washing compartment with approx.. 25 mtr fabric content with 7 upper/8 lower rollers, squeezing unit, high cloth feeding into relaxation washing compartment with rotary expanding segment roller make EHRHARD & LEIMER type ELSMART. squeezing roller, entrance into 2nd wash compartment with 7 upper/8 lower rollers with approx.. 25 mtr. fabric content, lye application compartment, entrance into steamer with approx. 60 mtr. fabric content tight strand on roller, 1.400 mtr. on relaxation belt compartment, squeezing roller, exit od steamer into 3 washing compartments with each of approx.. 25 mtr. content with each washer installed squeezing roller, feeding into cylinder dryer make WUMAG with it’s housing type MDD 16/2 comprising out of 2 columns of each 8 cylinder with each diameter 800 mm, steam heated, exit of cylinder dryer into J-box for interruption free production and dancing/ compensator roller, with centre cutting unit for 2 x 1600 mm fabric width, heat recovery, dosing station SIEMENS VISUALISATION, INVERTER.
AB08/161224E/LA-T/F/BJ/
Benninger Zell Sizing
Quantity: 1, Year: 2002, Suitable for terry fabric, Model: Ben Sizetec, Working width: 3’800mm, Beam dia: 1’000mm, Creel with 8 workstations for beams 1’000mm, Single size box with 5 Rolls One Dip and Two Nips. (suitable for 1’000mm warp beams), 8 X Drying cylinders diameter 1’000 mm, (4 X Teflon-coated), Residual moisture monitor- Mahlo Ecopac, Size kitchen, No of sizing beams: 18.Width of sizing box is 1’800mm.
AG54/121224E/ACL-AI/F/
Unitech Stenter
Quantity: 1, Year: 2007, 5 gas-powered fields, Vertical chain, Cylinder height 2200mm, Flap exit, From platform to platform. Without weft straightener. Without padder.
AE56/121224D/PP-P/F/
Monfongs Stenter
QUANTITY: 1, YEAR: 2008, 200CM ROLLER WIDTH,8 CHAMBER ,GAS HEATED,1 PADDER ,PIN CHAIN,LENZE INVERTOR ,SIMENS PLC,SIMENS MOTOR
AD92/061224/
KUSTERS Calender
Quantity: 1, Year: 1993, w.w. 3.20 m, thermal oil, 2 rollers (steel + racolan), 80 ton pressure
AG54/061224/
Mario Crosta Raising
Quantity: 1, Year: 1998, Working height 2000mm, 36 cylinders, year 1998, complete with flap. Hunting Electronics.
AG54/061224/
Xtema Shearing
Quantity: 1, Year 2005, Working height 2200mm, For fleece fabrics, The machine is equipped with a so-called pointing table. The machine with lap as output suitable for knitted fabrics, 2 spreading cylinders.
AG54/061224/
Bruckner Relaxation Dryer
Quantity: 1, Type WITRO 2-28 / 3, roller width 300 cm, working width 280 cm, 3 fields, 2 passes (inlet and outlet at the same site as the machine), diathermic oil heating, chain inlet BRÜCKNER vertical pin type.
AG54/061224/
Santex Dryer and Heat Setting Machine
Quantity: 1, Year: 1999, Type SANTSET 240, steam heated, outlet via flap. Working width: 2400 mm.
AG54/061224/
Santex Santasoft Tumbler
Quantity: 1, Year: 2008, High inlet with E+L KF2020 centering unit. TMT Foulard completely in Stainless Steel. SANTEX Dryer Model SANTASOFT, Year 2008. 2 Chambers, Steam heated.
AG54/061224/
Lafer Shearing
Quantity: 1, Year: 2004, Model: CM 100, Working height 2200 mm, Controlled by inverters and screen, Dust extraction and motor.
AG54/061224/
Lafer Raising and Shearing Line
2x Lafer raising machines, Year 1997, Double barrel, height 1800mm.
1x Lafer raising machine, Year 1997, Single barrel, Height 1800mm + Lafer trimmer. Twig with chain to widen the fabric.
1x Lafer raising machines, Year 1997.
,…
AG54/061224/
Lafer Raising
Quantity: 1, Year: 1998, Model GRI90, Working height 2200mm, Double barrel 24 + 24 cylinders, Panel with inverters and with PLC, Flap outlet.
AG54/061224/
Salvade Dryer
Quantity: 1, Year: 2002, Model AMV, Powered by diathermic oil, Controlled by inverters.
AC96/051224/
MONFORTS STENTER/HEATSETTINHG FRAME
Quantity: 1, Year: 2003/2004, MONFORTS type MONTEX 5000
upper roller width 2.200 mm, suitable for fabric width of up to 2.000 mm, 5 chambers gas heated,
horizontal pin chain, high cloth feeding device, edge uncurlers make ERHARD & LEIMER type KF 2020,
entrance into 2 roll squeezing mangle make KÜSTERS/FEYEN type 222.50.2200, roller width 2400 mm,
high cloth feeding and fabric guiding by stainless steel rollers into 2nd pad mangle make KÜSTERS/FEYEN
type 222.50.2200, deviation rollers to deviate the 2nd pad mangle, feeding into weft/bow straightener make
PLEVA with VISUALISATION type CINTEX, entrance into stenter frame with working panel SATELITE and
VISUALISATION, PLEVA moisture control type DSD-1 and SD-1P, optoelectronic width control make
ERHARD & LEIMER type FR1501, overfeeding, horizontal pin chain, 5 chambers gas heating, gas burner
make MAXON type VALUPAC, exit of stenter by cooling zone, plaiter and/or big batcher, SIMATIC touch panel
at exit with VISUALISATION, LENZE INVERTER.
AG54/061224/
Calender Suitable For Continuous Fabrics
Quantity: 1, Year: 2005, Transfer printing,Direct reactivation of the inks, Thermosetting – thermosetting.
HEATING CYLINDER FEATURES:
Diameter: 350 mm (13.78“).
Width: 3,600 mm (141.73“).
Working width: 3,400 mm (133.86“).
HEATING SYSTEM AND TEMPERATURE CONTROL: The cylinder is heated by 2 resistors (heating element) in a vacuum oil bath, in the total absence of air and pressure. MONTI ANTONIO SpA system The cylinder temperature is set via touch screen and regulated by an electronic thermostat equipped with a temperature alarm system and a maximum temperature limitation system (230 °C). The grille mod. C03 is an ideal machine both for the sublimatic transfer of paper produced using digital printers, exceptional technology with great flexibility, and for the reactivation of inks printed directly on fabric, using a plotter
AG54/061224/
Krantz Dryer
Quantity: 1, Year: 2003, 4 warm-up fields, Powered by diathermic oil, 1 pass of fabric, Working height 2500mm, Capacity of approximately 4000 kg of fabric, every 24 hours of work.
AG54/061224/
Biancalani Air 24
Quantity: 1, Year: 2022, Working height 2600mm,For Sponge,Airo 24 C model,
AG54/061224/
Monforts Stenter
Quantity: 1, Year: 2012, 7 fields powered by diathermic oil, Horizontal chain, with pins, Monforts brand scarf, 2 Mahlo brand weft straighteners, Working height 1600mm, Flap exit.
AE56/031224/BA/
Morrison Sanforizing
Quantity: 1, Year: 2009, Working width 200cm, Cylinder dia 2 meters, Steam heated, Make for denim fabric, Running condition.
AB55/281124/AR/
Ehwa Stenter Frame
Quantity: 1, Year 2015, 8 Chambers, Working Width 2000mm, Gas Fired, Pin Chain, 2 Bowl Finishing Padder, Korean Weft Straightener, Tandematic Decuerlers, Over Feed System, Cooling Zone at Exit, Exit with Plaiter, Excellent Condition.
AD22/271124D/TL-T/F/
Mario Crosta Shearing
Quantity: 1, Year: 2014, Working width 260cm, stopped in the mill floor, connected with power.
AC96/251124/
Stork Rotary Printing
Quantity: 1, Year: 1996, Type: RDIV, Printing width: 1850 mm, No. of positions: 20 colours.
CONFIGURATION: high entry with: beat & brush suction, E&L edge guider, heated plate.
20/ 19 print positions, DRYER 3DD2, gas heated, 3 sections, 3 passes, plaiter.
AC13/231124/
Austromaquina Printing
Quantity: 1, Year: 2012, Voltage: 220 V AC, Heating System: Steam, Working Pressure: 07.0 Kgf/cm², Number of Drying Stations: 03, Stamping System: Electro-magnets with 06 pressure variations. The screen printing machine operates with up to 08 colors, with 08 electro-magnets. The maximum repeat (rapport) is 8 frames of 2,300 mm. It features an entry frame with 02 pairs of fabric centralizers and the exit for folded fabric.
AD92/201124/
Steamer ARIOLI VAP271/PET
Quantity: 1, Year 1999, renewed in 2022
w.w. 3.20 m, oil heating system, max capacity 300 m,