Showing 1–50 of 57 results
Quantity: 1, Year: 1990 (renewed in 2010: new 14 gas burners, new control), Compartments: 7, Heating: gas, Working width: 60 cm – 2800 cm, Chain: horizontal pin chain, Foulard, Weft straightener, Exit: double A-frame batcher.
Quantity: 1, Year: 2000, Type: VN20/8, for woven fabrics,Width: 200 CM ,natural gas heating, Mahlo weft straightener, Control cabinet with inverters and electronics,, service platform,, Double ventilation drying tunnel,, 8 chambers with a total length of 35 mb, with 16 natural gas burners, Eclipse Ratiomatic, left and right burners with full equipment and automation,, hot air extraction,, a vertical chain system for guiding the fabric with the need to change to a needle one, Calender with cooling max. down pressure: 5 tons, -Fabric winding system with guide rollers with pneumatic cylinders., Power supply: gas installation, supply / exhaust ventilation system, compressed air, water and sewage system, Power consumption – 65 kW, Dimensions – 4.5 m wide; 35 m long, Status: stopped
Quantity: 1, Year: 1998, 4 chambers gas heated suitable for knitting and woven fabrics, Working width: 2.2000 mm, Number of chambers: 4, Heating system: gas, Vertical chain, Chain with pin and antidepinning system, Selvedges glueing device, Selvedges trimming devices complete with suctioning for the cut selvedges, Cooling unit, Fabric delivery in: plate, big roll and small roll, Exhauster complete with ducting, Machine in excellent condition, Machine is in prompt delivery.
QUANTITY: 1, YEAR: 1999, ROLLER WIDTH 2.000 MM.
FOR WOVEN FABRICS, ENTRANCE WITH UNWINDING STATION FOR A-FRAME, NON-STOP J-SCRAY ACUMULATOR, KUSTERS IMPREGNARTION PADDER, S-ROLL, 4 AD TANKS WITH MIXERS, MAHLO WEFT STRAIGNER, ENTRANCE WITH OVERFEEDING AND STEAMING BOX, HORIZONTAL PIN AND CLIP CHAIN (ONLY CLIP INSTALLED), 12 CHAMBERS GAS HEATED WITH ECLIPSE BURNERS, EXIT WITH J-SCRAY ACCUMULATOR, INSPECTION TABLE AND 2 A-FRAME BATCHERS, LENGTH OF THE OVEN: 3 x 12 = 36 M, SIEMENS INVERTERS
Quantity:1, Year:2004, WW: 2200 mm, 6 Chambers, Capacity 2000kW, Type VN-SFP-22/6-999, Gas heated, Bianco Weft Straightener 2004, For knitting fabrics, Vertical pin and clip chain, Padder
Foulard, Running conditions.
Quantity: 1, Year: 2004, 2.40 mt. working width, 2.60 mt. machine width,, 6 chambers, vertical chain, pins, padder (padder is reruberised in 2020), Mahlo weft straightener, plaiter, Siemens PLC, Lenze invertors, BURNERS FROM DOUBLE SIDE-12 BURNERS, gas heated, rails- sliders-main chain gears are replaced with new one in March 2021,
Quantity: 1, Year: 1996, For woven and knitting fabrics, Roller width: 2.600 mm, Working width: 2.400 mm, Number of chambers: 3, Heating system: gas, Lenght of introduction arms: around 5 mt, Vertical chain, Chain with pins and antidepinning system, Selvedges gluing unit, Steaming unit, located under the fabric introduction arms, Fabric cooling system in oven exit, Trimming and suctioning devices for the selvedges on the delivery side, Delivery of the fabric in plait, Exhaustion system, Electrical cabinet, Machine in perfect condition and still working, On request we can supply a non-stop machine, equipped with a fabric inspection table and reel for small rolls, brand UNITECH, year 2016, Machine is still in running.
Quantity: 1, Year: 1998, for high quality knitted fabrics, 6 chambers, Gas heated, 2400 mm, vertical pin chain with anti-depinning unit, CORINO padder, CORINO weft straightener, glueing device for selvedge with dryer and cutter, entry from A-frame or trolley, entry with steamer, delivery to A-frame, plaiter , includes too CORINO roller , (with inpection table to prepare fabric small rolls). , delivery with cooling device , Machine running in perfect conditions, Wonderful status, Machine working for big brands like ADIDAS, NIKE, LACOSTE
Machine have been received always correct maintenance and always have been installed original spare parts.
NOTE: Machine was in production and in %100 high quality condition. Machine then stopped, professionally dismantled and warehoused.
Quantity: 1, Year: 1998,working width 2200 mm
8 chambers with a total length of 35 m,
heating with natural gas
vertical chain system for guiding the fabric with needles and flaps
calender for cooling with max. pressure 5T,
Mahlo Type TFMC-106P Year 12.1997 (straightening system at inlet and outlet)
fabric winding system with guide rollers and pneumatic cylinders
16 natural gas burners, Eclipse Radiomatic 50-RM type 50-B711.7, 2001 yoc
mechanical speed – 30 m / min
max. working temp. 250 oC . control – automatic
control panels with inverters and electronics,
double ventilation drying tunnel,
hot air extractors,platform for personnel, power consumption – 65 kW
dimensions – width 4.5 m; length 35 m
Status: machine is running, finishing woven fabrics
Year: 1998, Width: 200cm, 8 Chambers for drying, Pin-Chain working for woven fabric for bed sheet , Mahlo weft straightener, Heating with thermic oil, Twin air system.
With accessories and devices
Thermal Oil INPLAN
For heating of thermic oil of the BRUCKNER Stenter
“Can be sold with or without the stenter”
If sold with boiler then the machine is offered with all the necessary piping for the thermal oil boiler,
expansion tank, oil reserve tank, with thermic oil boiler, the whole circuit is filled with 24 tanks of 55 gallons.
Both machines can be shipped in 7 x 40’ HC containers
Quantity: 1, Year: 1999, German Origin, Working Width: 1800mm, Drying chambers: 5, Origin Heating : Gas Heating, With Bianco weft straightener, Vertical pin chain, With centring device, With padder, Running in the mill floor
Year: reconditioned and retrofitted in the year 2016
7 chambers , gas , ww 2000 mm
For woven and knit fabric
Entry frame with adjustable fabric braking device
Slat centring widening device Corino FLC 4
Padder Beta with N. 3 cylinders with double imbibing tank
Weft straightener Bianco with optical heads, year of construction 1995, complete with new screen
Year of construction 1980
Useful working width 2000 mm.
Long introduction arms, suitable for processing knit fabric too
Steaming device, located underneath the introduction arms
Selvedges glueing device
N° 7 chambers heated by natural gas
Colling on the exit
Selvedges trimming devices complete with suctioning for the cut selvedges
Delivery of the fabric in plaits
Electric control board
Exhauster complete with ducting
In the year 2016 the following has been reconditioned and retrofitted, with replacing of:
– Complete check of the whole machine and rREPLACEMNT of the parts, which were not suitable any more
– Washing of the chain with specific products,
– Check of the sliding guides of the chain
– N° 14 NEW burners of latest generation Brand Cuenod
– N° 14 NEW valve groups for the above said burners
– N° 14 NEW ductings for the distribution of the heat inside the stenter
– N° 14 NEW thermo-adjusters for the adjustment of the temperatures inside the oven
– N° 14 NEW sensors for the detection of the temperatures in the oven
– N° 1 electric control board, NEW wiring for the part of the thermo-regulation
– Gas plant on board of the machine completely NEW
– Ductings for the exhausted fumes, located above the oven completely NEW
– N° 1 NEW operator panel for the weft straightener Bianco
Quantity: 1, Year: 1996, Fabric Width (mm): 2600, Roller Width (mm): 2800, Heating Source: Gas, Chain Section: Horizontal Pin, Weft Straightener: Available, Weft Straightener Make Pleva, 2004, type SLI, Exit: Weft Straightner, type SD1, No Of Chambers: 8, Padder: Available, Type Of Winding: Batcher, Edge Cutter: Available, Cooling Cylinder: Available, Moisture Control: Available, Moisture Control Make: Pleva, Centering Device Make: E+L FR 1501, Optical electro feeding control and sensors make: Santex Opto, Others(Specify) Bruckner 50 RM Radio matic, Over feed device, Delivery via cooling zone, Plain edge cutting and delivery blanket, Inverter type PROVIT PVS 1000, OPTIVAC Controllers, Production speed 120m/min, New chain links changed year (2015), Santex Opto Optical electro feeding control and sensors, Is for knit fabrics, Has weft straightener, padder
Quantity: 1, Year: 2003, Type HN 28/6
Working width 600-2800 mm, Roller width 3000 mm, Speed 5 -100 m/min. 6 Compartments (Split Flow), Gas Heated, with Ratiomatic Burners, Model RM100-VER.3.10, Type RMHP-150-B, Capacity 150 kW, Clip Chain, Type SK 936 K VII MOD, Entrance Zone, length 3m, Exit Zone, Length 3m, with Siemens Simatic Multipanel, Type PP7, with Video Control Station, with Pleva Moisture Control, with Erhardt & Leimer Elspreader, Type LG 0671, with Menzel Foulard, Speed max. 120 m/min. with Pleva Weftstraigthener with XXL Monitor, Exhaust Fan 1 : 9000 m³/h, Exhaust Fan 2 : 9000 m³/h, with Menzel A-Frame Winder, dia. max. 2000 mm, Total Length of Machine: 38 m.
Quantity: 1 , ww. 2350 mm, 6 chambers, gas heated (Maxon burners), with Jacob Weiß coating unit