AB55/170925/
Bruckner Stenter
Quantity: 1, Year: 1994, Working Width: 180 cm, Heating: Gas heating, Chambers: 8, Chain System: Horizontal chain with pin, Foulard: Ramish Kleinewefers Foulard for precise finishing, Weft Straightener: Mahlo for accurate fabric alignment, Controller: Siemens S7 for advanced automation, Burners: Junkers burners for efficient heating, Humidity Control: Pleva for optimized fabric processing, Exit System: Big batcher for large-scale operations, Bastian Automatic Batcher Changing System for uninterrupted production, Condition: Well-maintained and fully operational.
AB55/170925E/AOI-AI/F/AN/
Bruckner Stenter
Quantity: 1, Year: 2011, Type HN-SFP-20/6, Width 200 cm, Working width 180 cm, 6 chamber, Gas heated, Horizontal chain with pin, Entry with big batcher, Foulard, PLEVA weft straightener, Exit with big batcher, Condition -really good, regularly maintained, Status installed.
AB55/170925E/AOL-AI/F/AN/
Bruckner Stenter
Quantity: 1, Year: 2013, Type HN-SFP-20/6, Width 200 cm, Working width 180 cm, 6 chamber, Gas heated, Horizontal chain with clip, Entry with big batcher, Suchy Foulard, PLEVA weft straightener, Exit with big batch, Condition -really good, regularly maintained.
AA07/170925/
Zimmer Chromojet Printing Plant
420 cm
ENTRY UNIT
ZIMMER PRINTING MACHINE 8 COLORS POSSIBLE UPGRADE TO 12 WITH 1024 JETS
MllTER STEAMER
WASHING AND VACCUM UNIT
COBBLE STENTER DRYER
EXIT UNIT
ZIMMER COLOR KITCHEN
SUPRAMIX
ZIMMER SAMPLE PRINTER
STEAM GENERATOR WITH THERMAL OIL CIRCULATION
WASTE WATER TREATMENT AND RECYCLING UNIT ENVIROCHEMIE (COMPACT)
AB55/170925/AR/
Small Printing Plant
AB55/140825D/ATI-AI/F/AR/
SPG Prints STORK ROTARY PRINTING MACHINE
Year: 2019
Model RD8 ID
Working Width 2000mm
16-color Rotary Screen Fabric Printer
2000mm Roller Width consisting of the following:
J-Scray with Pull Roll Infeed System
Stovec Web Guidance System added in 2021
16 Color SPG RD8 ID Rotary Screen Print Block
Stovec 3 Zone, Gas Fired Dryer 180 degrees C
Exit Plaiter
All Pumps, Motors, Siemens Simatic Controls, Gas Train Assembly, Drive Cabinets and Electrical Cabling
Fimat Color Straining Machine, Year 2019
Fimat Rotary Screen Washer, Year 2019
Fimat Drum Washer, Year 2019
Machines are on Mill Floor.
AB55/140825D/RRP-CR/M/AR/
SPG Prints Digital Printer with Dryer
Year: 2019
Working Width 2200mm
36 Heads Year 2019 Consisting of the following:
AC. Corino In-feed, Type Big Roll
2200mm Roller Width, 10m/min
AD. SPGPrints Austria GmbH Model Javelin 1850 Mk 1.2 Digital Textile Printer
1200 DPI 1850mm working width
Wide-format printing
Short and long run capability
AVACAD and ARCHER digital software
A-Frame Indeed with Compensator
Spectrometer
AE. SPGPrints Austria Gas Fired Dryer
Machines are on Mill Floor.
AB55/170925/
SPG Prints Digital Printer
Year: 2019, With Dryer, 36 Heads.
Consisting of the following:
AC. Corino In-feed, Type Big Roll, 2200mm Roller Width, 10m/min, Year 2019
AD. SPGPrints Austria GmbH Model Javelin 1850 Mk 1.2 Digital Textile Printer, 1200 DPI, 1850mm working width, wide-format printing, short and long run capability, AVACAD and ARCHER digital software, A-Frame Indeed with Compensator, Spectrometer
AE. SPGPrints Austria Gas Fired Dryer
Machine Ran 50 hrs only, Brand New.
AB55/170925/AR/
Stork SPG Rotary Printing
Quantity: 1, Year: 2019-2020, Roller Width 2000 mm, 4 Chamber Dryer, Machine only ran few hundred hours Brand New Condition. With Spares and Acessories. Status : Installed.
AA10/160925/
Babcock Open Width Bleaching Range
Quantity: 1, Year: 1996, Width 240 cm, w.width 220 cm, for knitted & woven fabrics, tensionless, with 2 vats, 1 steamer and 4 washing vats.
AA10/160925/
Osthoff Singeing
Quantity: 1, Year: 1998, suitable for wool fabric
width 2000 mm, composed of: CORINO Centering device, Brushing and beating group right and reverse
1 Singeing machine right and reverse, 1 Right Brushing and beating group, 1 Reverse Brushing and beating group, Exit folding system
AE02/150925/
Fabric Finishing Plant
1x Bruckner stenter frame HN, year 1991, ww. 600 – 3600 mm, 7 chambers, steam heated
2x LAP-PRO Benninger jigger, ww. 3200 mm, year 2017
1x LAP-PRO Benninger jigger, ww. 2200 mm, year 2017
1x LAP-PRO Benninger jet dyeing machine, capacity 200 kg, year 2017
1x LAP-PRO Benninger jet dyeing machine, capacity 400 kg, year 2017
2x LAP-PRO dosing stations, year 2012 / 2017
2x Maag fabric inspection machines, ww. 2000 mm, year 2018
1x Alex inspection machine, ww. 3400 mm, year 2018
1x Maag selvedge printing machine, ww. 3200 mm, year 2018
AE56/150925D/ACL-AI/F/
Monfongs Stenter
Quantity: 1, Year: 2015, roller size 260cm, working size 240cm, 9 chamber, oil heated, with center padde, Horizontal chain, running condition
AC06/070725E/CAC-AC/F/AQ/
Goller Open Width Continues Washing and Drying Range for Heavy Woven Fabrics
Quantity: 1, Year: 2005, Mmade in Germany, Roller width 2200 mm, fabric width 2050 mm.
Composed of: fabric feeding from high frame E&L pneumativ cloth guiders type KF20, J-scray for non stop operation 6 x high performance washing compartments, sqeezing padders, electronic load cells, 2 x fluff filters, washing compartment top, rollers driven by direct coupled motors and gearboxes, fabric exit with big batcher.
Steam heated cylinder/drum, drying range, make Wumag, made in Germany, roller width 2200 mm, fabric width 2050 mm, cylinder/drum dia 800 mm, total 16 drying cylinder in stacks of 8 each with 1st 8 are teflon coated. Each cylinder driven by directly, coipled gear/motor, fabric exit with big batcher, 380v, 50hz, Siemens inverter and drives. Including 4 x stainless steel chemical feeding tanks.
AD92/150925E/APO-CI/F/
Unitech Stenter
Quantity: 1, Year: 2008, w.w. 2.40 m, 6 chambers, Vertical chain, Gas, padder, BIANCO automatic weftstraightener.
AA10/090925/
Cibitex Sanforizing
Quantity: 1, Year: 2007, Table width 2000 mm, Working width 1800 mm, Steaming cylinder 678 mm, Shrinking group dia.610 mm, with rubber belt 1960 mm, thickness 67 mm, Drying Felt Calender main cylinder dia.800 mm.
AD63/260525/
Bruckner Stenter
Quantity: 1, Year: 1996, 6 chambers oil heated working width 1.800 mm-, fabric entry: from big roll or plate- Single layer stenter, Entry arm’s length 4 meters
Kuesters two-cylinder padder model: 222.58- Mahlo weft straightener with no. 4 optical heads- vacuum suction system
No. 6 chambers heated with diathermic oil- Horizontal chain with clips- Cooling at the exit with air blowers- no. 1 cooling cylinder
Fabric delivery in big roll- no. 2 exhausters
AD63/250825/
Bruckner Stenter
Quantity: 1, Year: 1997, 6 chambers, Oil heated with coating head and foaming unit, Useful working width: 2000 mm., Fabric entry: from big roll or plate, Entry arm’s length 4 meters.
N. 1 ZAPPA brand coating bench with no. 7 blade supplied
N. 1 BOMBI foaming unit
N. 6 chambers heated with diathermic oil
Horizontal chain with clips, Hood with exit suction, Exit cooling with air blowers.
N. 1 cooling cylinder
Fabric exits in big roll
N. 2 exhausters
AE56/080925D/SL-AI/F/BA/
KD Decatizing Machine
Quantity: 1, Year: 2020, Italy brand, Maximum dia 180cm, Steam heated.
AE56/080925/
Benninger Desizing and Washing
Quantity: 1, Year: 2017, Working width 220cm, 4 washing tank.
AI60/060925D/CL-L/F/
MARIO CROSTA RAISING MACHINE
Quantıty: 2, Yoc:1997, Type:MC 10/24
Ww:2200 mm, 24 Raising Rollers, Driving Fabric Inlet Roll
Scroll Openning Rolls, Driving Faric Outle Roll with Plaiter:, Inverter Controlled, Allen Bradley Panel View 900 Touch Screen, J Box
AE56/050925/
Lafer Brushing / Sueding
Quantity: 1, Year: 2006,2009,2010，2011, Width 220cm, 6 roller ceramic, Running condition.
AC44/020925/
Transmatic roll to roll Calender GFO 1076 E
Quantity: 1, Year: 2024, Calender with folding arm, working width: 193cm/76″, With only 5,000 meters of fabric processed, this calendering machine is in excellent condition
Ramisch Calender
Quantity: 1, Year: 2009, Width 280cm, Running condition.
AE56/010925/
Santex Open Width Dryer
Quantity: 1, Year: 2019, Workig width 180cm, 6 chamber, Steam heated, 6 Maxon Bruner, Make for Knitting Fabric.
AB72/290825/
BABCOCK OPEN WIDTH HIGH EFFICIENCY WASHING RANGE
QUANTITY: 1, YEAR: 1998, WW 2200 MM
MODEL TRAFLOTEX, RANGE CONSISTS OF HIGH FABRIC ENTRY WITH J SCRAY, BIANCO COMPACT GUIDING SYSTEM, 3 X ENCLOSED STAINLESS STEEL WASHING COMPARTMENTS EACH EQUIPPED WITH 2 X HIGH LEVEL DRUM WITH DOUBLE SPRAY NOZZLE BARS, SCROLL ROLLERS, LOWER PERFORATED DRUM ROTATING WITH DOUBLE SPRAY NOZZLE BARS. FINE TRIM TENSION CONTROL BETWEEN EACH WASHING COMPARTMENT. 3 X CIRCULATION PUMPS FOR WATER SUPPLY TO NOZZLES. COUNTERFLOW OPERATION FROM EACH WASHING TANK BACK TO THE FIRST TANK. 2 X VACUUM SUCTION SLOTS ON THE EXIT OF WASHING COMPARTMENT 3 TYPE (OPTITEXMA SYSTEM WITH PUMP AND SEPARATOR). INDEPENDENT LIQUOR FLOW CONTROL AND AUTOMATIC TEMPERATURE CONTROL ON EACH WASHING TANK. PROGRAMMABLE FLOW CONTROL BASED ON RANGE SPEED AND WEIGHT OF FABRIC. STAINLESS STEEL PRE-WASH WATER HEAT EXCHANGER. THE RANGE IS SUITABLE FOR: DE SIZING, SCOURING, AFTER PRINT WASHING OF TENSION SENSITIVE WOVEN FABRICS & KNITTED POLYESTER, & POLY COTTON FABRICS CONTROL PANEL BASED ON SIEMENS HARDWARE. RANGE SPEED: 0-30MPM. OPERATORS PLATFORM DOWN THE RIGHT-HAND SIDE OF THE MACHINE. TAKE OFF BY CENTER WIND BATCHER
AA02/270825D/PSI-YI/F/AR/
Unitech Tenter Frame
Quantity: 1, Year: 2018, Model RED.EV07/6K/28u/G, Maximum width 3000mm, 6 Zone, Nat Gas Heated, 1 Exhaust Fan, Unitech Unwind stand, Pin Chain with Horizontal Return, Bianco Pad Model Foulard Spremitura, PW 3000 x FW 2800, With (2) chemical application tanks, Bianco Opener and weft straightener, Model Raddrizzatrama A Spilli, With Spirals RDSBP00049LO535
AC93/260825E/LS-Y/F/AQ/
Santex Continuos Tumbler
Composed of:
High entry with centering unit E+L KF2020. TMT Foulard completely in Stainless Steel. Model F2Sv.Year 2003. Power 5Kw. Two Rollers 2.000 mm width. Box with 3 + 3 rollers with fabric capacity 4 mt. J-Box accumulator.
SANTEX Dryer Model SANTASOFT. Year 2008, width 1800 mm, 2 Chambers. Steam Heated. Exit with E+L ELSMART and Spanders E+L ELSPREADER and Folder. (TFN-015)
Production capacity/speed: For example 150/gr mt can go to 20 mts/min. it is for woven, not knit. It all depend on the type of fabric.
AB60/270825/
Biancalani Continuous Fabric Drying and Softening Treatment
Quantity: 1, Year: 2013, Type AIRO24E/180, Working with 1800mm, Frequency 400v-3, 50Hz, pneumatic pressure 6 to 10 bar, gas pressure 100-200 mbar, production speed (fabric inlet/outlet) 3-50m/min, treatment speed (fabric dragging speed) up to 2500m/min, fabric inlet from flat folded * roll * large roll * in line, fabric outlet on plaiter, installed power 90kw, air heating with gas maximum temperature 170°C, including steamer to humify the fabric.
Machine is in production (as inspected Aug 25)
AD76/260825D/CPI-CI/F/AS/
Monforts Montex 6500 Stenter
Quantity: 1, Year: 2011, 3.40 mt working width, 8 chambers (Gas heated), Horizontal Pin chain, Kusters Padder, Mahlo Weft Straightener, Plaiter, CONDITION : installed and running situation
AB76/250825E/OR-T/F/BY/
Tumbler PENTEK ENAIR GY
Quantity: 1, Year: 2006, Type: 2600 X 2400, Width 2400 mm, Gas heating, Weishaupt burners, Machine in very good technical condition, running.
AE56/240825/
Lafer Raising
Quantity: 1, Year:2018, Width 200cm, Double drum 28+28 rollers, Can test running, Italy origin.
AE56/150825/
Santex Compactor
Quantity: 1, Year: 2007, 240cm width, 7 meter pin chain, simens PLC, Controller.
AB55/140825/
Monforts Coating Line
Quantity: 1, Original Year 1996-98, Fully Rebuild Year 2024, ( Electronics – New Radiator Full mechanical and Technical Upgrade), Width 3400 mm, Coating Head, Flock House with 6 Station, 8 Chambers, Exit Calender, Accumulator, Online Inspection and Batching. Heated By Oil, Installed and Running.
AE56/110825/
Karl Mayer Sizing Machine
Quantity: 1, Year: 2010, 400cm width, single sizing box, size box width 210cm, 7 beam creel, 12 cylinder dryer, 2 chemical tank, running condition
AI60/010825D/CL-L/F/
MARIO CROSTA RAISING MACHINE
Quantıty: 3, Year:2000, Model: MC10/24, For knitted and woven fabric, Ww:2000 mm x 24 Raising Rollers
Driving Fabric Inlet Roll, Scroll Openning Rolls, Driving Faric Outle Roll with Plaiter, Inverter Controlled, J Box
AI60/010825D/ACC-AC/F/
BRUCKNER STENTER FOR WOVEN
QUANTITY: 1, YEAR: 1992, WORKING WIDTH 1800MM , 10 CHAMBERS GAS AND STEAM HEATED:
NON STOP ENTRANCE WITH J SCRAY AND DOGAL SPREADERS INSTALLED IN 2000, RAMISCH KLEINWEFERS DYEING PADDER MODEL BICOFLEX, WITH 4 ADDING TANKS WITH MIXER,MAHLO ORTHOMAT WEFT STRAIGHTENER TYPE RFMC-94H WITH 4 OPTICS, BRUCKNER STENTER FOR WOVEN 10 CHAMBERS DUAL GAZ AND STEAM HEATED , WORKING WITH:1800 MM, HORIZANTAL PIN CHAIN
ENTRANCE WITH UNCURLERS AND OVERFEEDİNG SYSTEM,EXIT WITH COOLING ZONE, 3 COOLING CYLINDERS, EXIT WITH PLEVA HUMIDITY DETECTOR , DOUBLE A FRAME BATCHER AND FOLDER. YEAR: 1992, MACHINE EQUIPPED WITH: AUTOMATIC CHAIN WIDTH REGULATION, ROTATIVE SELF CLEANING FILTERS, AUTOMATIC NOZZLE BLOCKAGE WHEN STOPPING THE MACHINE, PLEVA RESIDUAL MOISTURE MEASURING DEVICE
THE BRUCKNER STENTER STOPPED
AE02/300725/AN/
Bruckner Stenter Frame HNB-SFP-34/2-976
Quantity: 1 , Year: 2011, ww. 3400 mm, gas heated, 2 chambers (prepared for 3rd chamber), Suchy foulard (WOB 3600 mm), cooling unit, fully automatic Suchy cutting system , (complete overhauled in 2023)
Tmachine is in top condition. The machine is designed for reinforced production and the stenter frame is for finishing and assembling the mesh. Basically 2 different reinforced grids (in roll or sheet format) can be produced: 2-dimensional and 3-dimensional.
AB46/300725/
Krantz Dry Line/Tenter
Quantity: 1, Year: 1990, Krantz 4m max width, Clip chain, 4 zone, Gas heated
AF74/290725/
FERRARO OPEN WIDTH COMPACTOR
Quantity: 1, Year: 2007, Model: Comptex-RE-2500, Lenght of chain: 9m
Kenar tutucular: Erhardt+Leimer Elspreader, Side cutters: N/A, Felt unit: Serteks (2016), Felt heating cylinders: 2 pieces diam. 600mm
Condition of chain and felt: Almost New!, Moisturizing unit: Serteks (2016 model), Inspection and rolling unit: Serteks (2016), Panel: Originally Ferraro
AD92/280725/
Bruckner Stenter
Quantity: 1, Year: 1998, w.w. 2.40 m, 6 chambers, Vertical chain, thermal oil, padder, ortomat, manual weftstraightener, exit by folder and small roll.
AB52/180725/
Benninger ZELL BENSIZETEC Sizing
Quantity: 1, Year: 2006, BEN-SIZETEC Compact model, Delivery Working width up to : 240cm with max beam dia 1000 mm, 8 drum Dryer with a diameter of 800 mm, Beaming speed 0.4 bis 125 m/min , 2 Single size box with 2 Immersion rollers (double dip and double nip with 2 Lower rollers and 2 Squeeze rollers), Max Sizing bath width : 220 cm, Complete kitchen for sizing liquid , Beam to Beam type, FANTASTIC CONDITION.
AA02/140725D/OPI-RI/F/AR
Karl Mayer Sizing
1x Karl Mayer Sizing:
Year: 2018, Model Pro-Size, 12 Beam Creel with Pneumatic braking, 2400mm warp width, 1250mm flange diameter, With Beam to Beam repair stand, Karl Mayer Pro-Size Vertical Sizing Unit Model VSB, With 8 Drying Cylinder Cans 240cm working width, Final drying on 8 Cylinder cans, 6 Drying cans total, Warp splitting section for 6 splits, Karl Mayer Beaming Headway, 3.8 meter maximum Warp width, 1250mm Maximum Beam diameter.
1x Karl Mayer Size Kitchen
1x Stainless Steel Size Cooking Vessel – 500 Gallon
1x Stainless Steel Size Storage Vessel – 750 Gallon
1x 3 Ton Mechanical Chain Hoist
With mono rail for beam loading