Showing 1–50 of 74 results

Show sidebar

AE11/030821/

TOYOTA JAT-710 Air Jet Loom

Quantity: 1, Year: 2008, Width: 230 cm, Cam Shedding Motion (1661 Positive)
Acessories per loom:
02 Feeder, 07 Shafts, 04 Frames, 01 Warp Beam , 01 Cloth Roller , 4000 droppers

AE56/020821/

Tsukama ZW403 Waterjet loom

Quantity: 200, Year: 2010, Width in 190 CM, 4 frame, 1 beam 1 roller, Running condition

AA32/020821D/RT-R/M/BQ/

TOYOTA 810 AIRJET

Quantity: 8, Year: 2015 / 2016, 230 CM
STAUBLI CAM – 1681, 8 SHAFTS CAPACITY, 6 SHAFT INSTALLED, 2 NOZZLES,
EACH LOOM WITH , 2 ACCUMULATORS, 6 HEALD FRAMES, 1 REED AS ON LOOM
1.5 BEAMS DIA.1100 M.M., 2 CLOTH ROLL, 6000 HEALDWIRES, 6000 DROPPERS,
WITH ROTARY LENO DEVICE, (Machine equipped with batching but it won’t be given with the loom ), RUNNING ON MILL FLOOR, Status :Working

AC09/300721/

Toyota JAT 710 Airjet Jacquard

Quantity: 8, Year: 2003/ 2005, Model : JAT 710, Working Width in cm : 280
No Of Colors : 4 x 6, 4 x 8
No Of Prewinder Set : 4 x 6, 4 x 8
Shedding Motion Make : Staubli, Shedding Motion Model : LX 1600B, Jacquard Controller Type : JC5
Jacquard Motion Type : Electronic, Take up Motion : Electronic, Let-Off Motion : Electronic, Selvedge Type : Bobbin Rack, Temple Type : Normal, No of Back Rest Roll : 2, No of Warp Stop Bar : 2 No of Warp Beam Supplied : 1.5, No of Cloth Roller Supplied : 1.5, Ground Beam Dia in mm : 800, Top Beam Dia in mm : 1200

AC09/260721D/RY-C/F/

Toyota JAT 810 Airjet

Quantity: 8 , Year : 2015, Shedding Mechanism : Cam, Working Width in cm : 190
No Of Colors : 6, No of Prewinder/Set : 6, Shedding Motion Make : Staubli, Shedding Motion Type : Mechanical, Shedding Motion Capacity : 8Easing Motion : Available
No of Back Rest Roll : 2, Warp Beam Dia in mm : 800, No of Frames Supplied : 4, No of Warp Stop Bar : 6, No of Heald Wire Supplied/Set : 7000, No of Dropper Supplied : 7000, No of Warp Beam Supplied : 1.5, No of Reed Supplied : 1, Cloth Take-Up Type : On Loom, Take up Motion : Electronic, Let-off Motion : Electronic, Temple Type : Normal, No of Cloth Roller Supplied : 1.5, Beam Type : Single, Shedding Motion Model : 1671, Selvedge Type : E Leno, Shafts Installed : 8

AB46/200721D/L-A/C/

SAURER S 500 DOUBLE WIDTH RAPIER WEAVING MACHINE

QUANTITY: 175 , MAKE: SAURER, MODEL: S-500, WIDTH 1850mm ( 2 panels)
2 PHASE WEAVING , 2 COLOR
TUCKING UNITS ( 2 NOS. LH & 2 NOS. RH) FOR MAKING 2 CLOSED SELVEDGE SEPERATE PANELS.
SINGLE RIGID RAPIER TAPE WITH BOTH SIDE GRIPPER DRIVEN BY CENTRALLY CONTROLLED TOOTHED GEAR.
VERTICAL RAPIER GUIDE TEETH.
4 HARNESS EACH SIDE , 6 UNDERMOTIONS EACH SIDE, 2 CAM BOX UNITS PER MACHINE
10 CAM CAPACITY PER CAM BOX
2 – FEEDERS /LOOM , 2 SPLIT BEAMS (1 SET) PER MACHINE, 2 NOS. BATCHING MOTION
HEALD WIRE & DROP PIN AS FITTED
WARP STOP MOTION – 5 DROP PIN SERRATED BARS (AVG)
SPEED : 300-330 RPM EACH SIDE, TOTAL PICK INSERTION: 600-660, POWER : 3.75 KW (5 HP)

AE56/020721/

Toyota T810 Air Jet Loom

Quantity: 66, Year: 2013, 230CM, 2 feeder, 4 frame, 1 beam 1 Roller, 6 shaft 800mm beam, running condition

AA02/280621/

SAURER DOUBLE RAPIER LOOMS

INDIGO ROPE DYE -SAURER S.500 WEAVING

Ball Warping
2x R.C. Ball Warpers
Model BW.54.5
With Reed and Rope Condensing feed Stand
With in Line Magazine Transfer Creels

Rope Dyeing
1x Morrison Indigo Rope Dye Range
24 Ropes x 90 inch wide
Ball Creel with compensating accumulator
1 Pre-Treatment Wash Box with Nips
3 Sulphur Bottoming boxes with Nips
8 Morrison Indigo Dye Boxes Nips and Oxidation system
4 Morrison Wash off Boxes and Nip Rollers
3 stacks of 14 off set Drying Cans – Total 42 Cans
Exit to Rope Coiler into cans

Re- Beamers
5x Griffin Long Chain Rebeamers
Model Titan LCB
72 inches wide x 38-inch diameter
38 inches flange diameter
With 5 Strand Rope Tension stand
With Ceiling mounted de-Twist station

Slasher Sizing
1x Santa Clara Sizing Machine (Slasher)
Model WN.10
Headway 160 inches Wide Delivery Roller (4 Meter)
2 Size Boxes 112 inches ( 285cm) Width
12 Dry Cans 110 inches (280cm) Enclosed
16 Beam Creel
Moisture Monitors & Temperature Monitors
With Drives & Control Panels
With 1 Storage Kettle

Weaving
50x Saurer Double Rapier Looms
Model S-500
Working Width 2 x 1.85 CM
Left side 1.85cm Plus Right Side 1.85cm
2 Color
Positive Cam Motion
6 Harness Capacity
6 levers installed
Side Tucking Motions
1 pair on each Left and Right loom
Each Loom supplied with
2 TMT Weft Feeders each Loom
4/6 Steel Heddle Harness each Loom
4 / 6 Cam plates
2/1 or 3/1 or 1/1.1/1
6 Banks of Drop Wires each Loom
1 Reed Per Loom
1 Beam Per Loom 950mm beam diameter
Without batchers

AE23/170621E/CS-C/F/AS/

Omni plus 800 looms

Quantity: 40, Year: 2011, 220cm , 12 level, Dobby, 6 colour, 5000 dropper/wires, 1 beam/roller, 6-8 heald frames

AB60/190521/

Promatech Rapier Loom ALPHA

Quantity: 1, Year: 2003, Working width 1900mm, 8 colours (but 1 missing weft-arrow)
Equipped with:
4 weft accumulators SIRIO Progress 3, 6 warp stop motion bars, 9668 droppers, cloth roller drive installed with 1 cloth roller (not original); with speed control box-unit; 1 weaving beam diameter 1000mm. Pre-equipped for jacquard but without jacquard.

AB60/190521E/RI.L-C/F/AO/

Itema Rapier Weaving Loom R9500R

Quantity: 1,Year: 2013,Type: R9500R,ITEMA Rapier weaving loom type R9500R year of construction 2013,working width 2100mm, electronic STAUBLI dobby type 3020/20 DRC4 20/20/20, equipped with : electronic weft selector for 8 colours, electronic let off, electronic take up, SK guided rapiers ‘Monorail’ type hooks, weft cutter ROTOCUT, electronic waste cutters right and left, independent electronic device ISD2 right and left, warp stop motion with 6 rows / 30mm, 1 warp beam Ø 800mm, 1 cloth roll, 10 heald frames 13” J, 4 weft accumulators ROJ Chrono X3 with electronic IRO weft tensioners, IRO power interface box, combined feeder/bobbin creel, touchscreen, CE-label.
MORE WEAVING MACHINES

AC09/110521/

Toyota JAT 710 Airjet

Quantity: 20, Year: 2003, Shedding Mechanism : Dobby, Working Width in cm : 190, No Of Colors : 4, No of Prewinder/Set : 4, Shedding Motion Make : Staubli, Shedding Motion Installed Capacity : 16, Warp Beam Dia in mm : 800, No of Heald Wire Supplied/Set : 5000, No of Dropper Supplied : 5000, No of Warp Beam Supplied : 2, No of Cloth Roller Supplied : 2, Dobby Type : Negative.

AF54/050521/BF/

Toyota Air Jet Looms JAT 710

Quantity: 83, Year: 32×2011 – 48×2012 – 3×2013, 190 cm dobby, Type : JA6S-190TE-EF-T710, Reed Space : 190 Cm, With Staubli 2861B dobby, 2 Colors, 2 accumulators, 4 weft feeders, 10 Heald Frames, 6 Electric Drum Feeder, Single Beam 46 Machine, Double Beam 37 Machines, All looms working cotton 700 rpm if polyester 900/1000 rpm, 8000 droppers and heald wires, Electric Source : 380 V 50H.

AF54/030521/

Toyota Airjet Looms (New JAT 810)

QUANTITY: 72, YEAR: 2015 (SEPTEMBER – OCTOBER), MODEL : JA2S-190CM-EC-EF-T810, W.W .: 190 CM, NEW MULTI-LINK CRANK SHEDDING 2 SHAFTS, EDP 2 COLOR AT WILL DEVICE BY ELECTRIC DRUM POOL, PROFILE REED SYSTEM, ELECTRIC LET OFF, ELECTRIC TAKE UP, ELECTRIC WARP STOP MOTION, MAX. SPEED 1100 RPM, ELECTRICITY: 380V/ 50Hz
EACH SET WITH ACCESSORIES:1.5 WARP BEAM (DIA. 800MM), 1.0 CLOTH ROLL, 2 HEALD FRAMES, 2 WEFT FEEDERS, 7,000 DROPPERS, 7,000 HEALD WIRES (C-TYPE 280MM), 1 E-REED (LOWER NO.100), Conditions excellent.

AD22/300421/

Toyota 710

Quantity: 15, Year:2006-2007, Width 340cm , Staubli Cam 1761A, Elec-let off and take up , 6 heald frames, 1 reed, 2 nozzles , 2 weft feeders , 1.5 beam/ 1.2 cloth roller, Twin beam type, beam flange 800mm, Running in the mill floor

AE02/140421/

Panter Looms EX 5

Quantity: 2, Year: 2006, ww. 2100 mm, With Stäubli jacquard CX 870, 2688 hooks, JC 5.

AA10/240321/

Panter Looms E5XP

Quantity: 4, Year: 2004, Width 1900 mm., Staubli dobby type 2668.

AE56/220321/

Toyota T710 Air Jet Loom

Quantity: 14, Year: 2006, Width 340cm, 2861B dobby, 2 feeder, 12 frames, 1.5 beam 1.5 roller.

AD22/030820/

Itema R9500 Rapier Looms

Quantity: 36, Year: 2015, Italy origin, Width 220 cm , Staubli S3020 dobby, 3-4 weft feeders , 8 heald frames, 1.5 beam/Cloth roller, Stopped in the mill floor

AC09/010321/

Itema A9500 Airjet

Year: 2014, Shedding Mechanism : Cam, Working Width in cm : 340, No Of Colors : 4, No of Prewinder/Set : 4, Shedding Motion Make : Staubli, Shedding Motion Model : 1781, Shedding Motion Capacity : 10, Shedding Motion Installed Capacity : 10, Shedding Motion Type : Mechanical, Selvedge Type : Leno, Cloth Take-Up Type : On Loom, Let-off Motion : Electronic, Warp Beam Dia in mm : 1100, No of Back Rest Roll : 2, No of Frames Supplied : 10, No of Warp Stop Bar : 6, No of Heald Wire Supplied/Set : 6000, No of Dropper Supplied : 6000, No of Reed Supplied : 1, No of Warp Beam Supplied : 1.5, No of Cloth Roller Supplied : 1, Inverter : Available, Beam Type : Single, Take up Motion : Electronic

AG28/151120D/RY-R/C/BF/

Toyota High-Performance High-Speed Airjet Looms

Quantity: 26 , Year: 2015,Model: JA6S-190TP-EF-T810
with Staubli Positive 8shaft Cam Motion type 1671, 6 Color Weft Insertion with 6 Feeders. Full specifications are provided in the 2 page spec-sheet. Photographs, Layout diagram, and videos are also provided. Delivery is January 20th, 2021 onwards. Looms will remain on floor with power or in production until sold.

AA32/080221D/RY-C/F/BQ/

Itema R9000 rapier loom

Quantity: 1, Year: 2014, Width 190cm, 2658 B staubli dobby 16 levers, 6-8 Colour Machine, With, 8 frames, 1.5 beam and cloth roll, 5000 he’d and droppers, 3 feeders, Machine in excellent working condition on 400-500 rpm

AB08/080221/BJ/

TOYOTA AIRJETS

Quantity: 10 , Year: 2008, TYPE: JA 2S – 190 – TP – EF – T 710, WORKING WIDTH: 1900MM, COLOURS: 2 (WEFT MIXING), MOTION: TAPPET
WARP BEAM DIA: 1000MM
FABRIC TAKE UP: NEUENHAUSER BATCHING MOTION, ACCESSORIES:, 1 WARP BEAM, 4 HEALD FRAMES, 2 WEFT ACCUMULATORS, 3 Looms have tuck in devices , 7 looms have electronic leno devices

AF80/270121/

Panter E6 Maxi 340

Quantity: 1, Year: 2014, dobby staubli 20 20, Equiped with 4 feeders.

AE56/150121/

Panter E58 Rapier loom

Quantity: 1, Year: 2008, width 340 cm, 4 feeder, 8 frame,16 shafts, single beam dia 800mm, 1 beam 1 roller, Staubi 2658 Dobby, 10 sets Running condition

AA32/060121D/TO-O/F/BQ/

Airjet Itema Looms

Quantity: 2, Very less used machines , Year: 2016, Width 220 cm
1 Nos Itema A9500, 4 color ,staubli cam 1781,8 lever
1 Nos Itema A9500, 6 color,staubli dobby 3260,14 levers
Accessories: 4 weft feeder, 1.5 warp beam 800mm, 1.5 cloth roll, 8 Heald frames, 1 reed.

AD22/080121/

Toyota 710

Quantity:48, Year: 2007, Width 230 cm, Staubli 1661 cam, Elec-let off and take up, 2 nozzles, 6 heald frames, 1 beam/clother roller, 2 weft feeders, Stopped in the mill floor.

AD22/151220/

Itema R9500 Rapier Looms

Quantity: 24, Year: 2017, Italy origin, Width 230 cm , Staubli S3020 dobby, 3 weft feeders, 8 heald frames, 1 beam/Cloth roller, Running in the mill floor

AE56/101220/

Toyota T810 Air Jet Loom

Quantity: 12, Year: 2014, width 230cm, 6 nozzle, 6 feeder, 8-10 frame, 16 shaft, 1 beam 1 roller, running condition

AB46/091220/

Pignone Jacquard and Dobby Looms

Quantity: 39
9 Pignone jac loom (without jac head)
1 1992 FAST model 200cm
3 1994 FAST model 200cm
1 1997 FAST model 340cm
4 1997 FAST model 200cm

5 Pignone Terry jac loom (without jac head, capable of flat weave also)
1 1993 TPS 629 290cm
1 1996 TPS 622 220cm
1 1996 TPS 626, 260cm
2 1997 TPS 622 220cm
Each of the 14 looms above wtih 8 color capability & 6 weft feeders, Electronis Warp Let Off and Cloth Take Up, Off Loom Take Up, without jac head (loom only)

2 Pignone dobby loom
1 Pignone TPS522, 1993
1 Pignone FASTS200, 1996, Staubli 2660 electronic dobby

19 Pignone dobby loom
5 1987 TP522 220cm, sn46752, 46748, 46749, 46750, 46751
4 1990 TP520 200cm
1 1987 TP533 330cm
5 1992 TP620 200cm
3 1995 TP620 200cm
1 1992 TP633 330cm
each of the 19 looms above wtih 8 color capability & 2 weft feeders, Cloth roll Take Up, Off Loom Take Up

4 Pignone dobby loom
2 1994 TP629 290cm
2 1994 TP624 240cm
Each of the 4 looms above wtih 8 color capability & 2 weft feeders, Staubli 2660 dobby with 20 lever capacity & 12 levers installed, avg of 6 harness frames, 5 stop motion bars wtih droppers as fitted, Off Loom Take Up, no beams as these machines ran from creel system

AD22/291020/

Toyota 710

Quantity: 44, Year: 2006, Width 340 cm , Staubli 2861B dobby, Twin beam, 2 nozzles, 6 heald frames, 1.5beam / 1.5cloth roller, 2 weft feeders, 10000 wires and droppers, Stopped on the mill floor, Can test run one by one.

AE18/081020/BC/

Toyoda Jat 810 Airjet Jacquard Looms

Quantity: 2, Year: 2014, July, Model ; JA4SF – 190 JE – EF – T810, Width 190 cm
4 color/4 nozzle, 01 warp beam, 04 weft accumulator, 01 cloth roll, Ready to install Jacquard mc, but without Jacquard.

AA02/240920D/T.L-I.L/F/

Saurer Two Phase Rapier Looms

Quantity: 180 , Year: 1982,1984, Model S-500, Working Width 2 x 1.85 CM
Left side 1.85cm Plus Right Side 1.85cm, 2 Color, Positive Cam Motion, 6 Harness Capacity, 6 levers installed, Side Tucking Motions, 1 pair on each Left and Right loom
Each Loom supplied with: 2 TMT Weft Feeders each Loom, 4/6 Steel Heddle Harness each Loom, 4 / 6 Cam plates, 2/1 or 3/1 or 1/1.1/1, 6 Banks of Drop Wires each Loom, 1 Reed Per Loom, 1 Beam Per Loom 950mm beam diameter, Without batchers.