Showing 1–50 of 84 results

Show sidebar

AG78/110421D/ARP-AC/M/BA/

Oerlikon Barmag Texturizing

Quantity: 8, Year: 2007, Type: FK6-1000-V , 240 spindles., Running condition.

AC86/070421E/ARL/F/BY/

SSM TEXTURIZING TASLAN

Quantity: 1
30 each position is individual, with automatic doffing. Texturing box with water and jet device for each position 4 hot pucks with individually adjustable temperatures, a small fixing furnace (total stroke 150mm), two cold pucks.

Rotary creels with the possibility of feeding 4 different wires per position, each with reserve.
4 sensors and four thread cutters per position

AG75/290321D/ATL-AL/F/BA/

Barmag Texturizing Machine AFK-1500V

Quantity: 4, Year: 2003, 240 Positions, auto doffing machine, high options, higher speed, yarn products quality is better than FK6-1000V, Requires 4 Ctrs for shipment

AC86/250321E/AYP-AR/F/BY/

STAHLE-ELTEX Texturizing & SSM Winder

STAHLE-ELTEX Texturizing Taslan Machine:
Quantity: 1, Year: 2001, mod.DP2T/MY, 25 heads, tube 290 mm final Bobin
Texturing box with water and jet device for each position 4 hot pucks with individually adjustable temperatures, a small fixing furnace (total stroke 150mm), two cold pucks.

SSM Winder:
Quantity: 1, Year: 2005, TYPE: DP2 T, 30 heads, tube 290 mm final Bobin

With automatic doffing.
Rotary creels with the possibility of feeding 4 different wires per position, each with reserve.
4 sensors and four thread cutters per position

AA81/070321D/PP-AI/F/BC/

Barmag Draw Texturizing AFK6

Quantity: 3, Year: 1995 (2018 reconditioned), Model AFK-V-HTI (designed for higher speed with lower electrical cost), 216 positions each, 2 heaters, Primary electrical heater – 1m length, Secondary dowtherm heater – 1.3m length, Heater configuration type “V”, Autodoffing, On Line Tensioning, Air Jet Entangling, Belt driven friction units, Status: Running.NOTE: 6 to 7 ctrs
Note:
The machine is complete .But not operation condition now. Parts are complete.They are stop condition, any time can test run,but after purchasing contract , I can do test running.has no 2ndary Heater., Originally it was equipped with 2 heaters,but when they produce suitable for single heater, they took out heaters, each

AB10/010321D/RIL-CI/F/

Barmag EFK Texturizing Machines

Quantity: 6 , Year: 2010 , 240 positions each, 2 heaters, Unitens OLM, Airjet entangling, W2x additional separator roll, The denier range is 30 ~ 300 dn

AG75/010321D/COI-CI/F/BA/

Barmag Texturing

Quantity: 2, Year: 2016, Model FK6-1000, 288 spindle.Machines are type “V”

AG41/170221/BT/

Barmag Texturizing

Quantity: 7

AG41/170221D/OI-AI/M/BT/

1x Barmag FK6 V 1000:

Year: 2004, Position: 240, Denier Range: 50-600
Friction Unit: 6mm/9mm Ceramic or PU, Inter. Jet: Temco 22-Y-15, Speed: 1000 m/min
Prim. heater L: 2000 mm, Secon. heater L: 1460 mm, Cooling Plate L: 1100 mm, Max Frict. Speed: 18000
Polyester DTY, Occasionally in production.
At the moment the speed is on 600 meter/minute

AG41/170221D/TL-AI/M/BT/

1x Barmag FK6 v1000:

Year: 2001, Position: 240, Denier Range: 50-600
Friction Unit: 6mm/9mm Ceramic or PU, Inter. Jet: Hebrlien p203, Speed: 1000 m/min
Prim. heater L: 2000 mm, Secon. heater L: 1460 mm, Cooling Plate L: 1100 mm, Max Frict. Speed: 18000
Polyester DTY, Occasionally in production.
At the moment the speed is on 600 meter/minute

AG41/170221D/TL-AI/M/BT/

1x Barmag FK6 M1000:

Year: 2000, Position: 216, Denier Range: 50-600
Friction Unit: 6mm/9mm Ceramic or PU, Inter. Jet: Hebrlien p203, Speed: 1000 m/min
Prim. heater L: 2500 mm, Secon. heater L: 1460 mm, Cooling Plate L: 1100 mm, Max Frict. Speed: 18000
Polyester DTY, Occasionally in production.
At the moment the speed is on 600 meter/minute

AG41/170221D/TI-AI/M/BT/

1x Barmag FK6 V1000:

Year: 1997, Position: 216, Denier Range: 50-600
Friction Unit: 6mm/9mm Ceramic or PU, Inter. Jet: Hebrlien p203, Speed: 1000 m/min
Prim. heater L: 2000 mm, Secon. heater L: 1460 mm, Cooling Plate L: 1100 mm, Max Frict. Speed: 18000
Polyester DTY, Occasionally in production.
At the moment the speed is on 600 meter/minute

AG41/170221D/LL-AI/M/BT/

1x Barmag FK6 M900:

Year: 1993, Position: 216, Denier Range: 50-600
Friction Unit: 6mm/9mm Ceramic or PU, Inter. Jet: Temco 22-0-9, Speed: 900 m/min
Prim. heater L: 2000 mm, Secon. heater L: 1460 mm, Cooling Plate L: 1500 mm, Max Frict. Speed: 18000
At the moment the speed is on 600 meter/minute

AG41/170221D/LL-AI/M/BT/

2x Barmag FK6 M900:

Year: 1990, Position: 216, Denier Range: 50-600
Friction Unit: 6mm/9mm Ceramic or PU, Speed: 900 m/m
Prim. heater L: 2000 mm, Secon. heater L: 1460 mm, Cooling Plate L: 1500 mm, Max Frict. Speed: 18000
At the moment the speed is on 600 meter/minute

machine/s have 2 heaters
No lycra attachments
For Making Polyester yarn with Lycra, buyer can find extra equipment like HITAC equipment and add to the machine.

AC33/090121D/YCI-CI/M/AS/

Barmag DTY Texturizing

Quantity: 1, Year: 2004, Model MPS-V HT1, 120 positions, 10 sections w/ individual settings, Heberlein jets, autodoff, Status: working.

AE56/040121/

Barmag Texturizing

Quantity: 2, Year: 2006, 240 spindle, Single yarn path, With nozzle, 3 roller, Running condition.

AF68/211220D/LLI-LI/M/AS/

RIETER PP FDY MULTIFILAMENT YARN MACHINE

Quantity: 1, Year: 2003, 4 Positions In A Set, 2 Extruder

AF68/211220D/CYO-CC/M/AS/

RIETER PP FDY MULTIFILAMENT YARN MACHINE

Quantity: 1, Year: 2000, 2 Positions In A Set, 1 Extruder

AF68/211220D/RPL-RL/M/AS/

NEUMAG PP FDY MULTIFILAMENT YARN MACHINE

Quantity: 1, Year: 1998, ‎4 Positions in a set ‎, ‎2 Extruder‎

AF68/211220D/ATL-AL/M/AS/

AIKI RIOTECH AIR TEXTURING MACHINE

Quantity: 1, Year: 2006, Position: 108, AT-501-II EX

AE56/261020D/ARA-AC/C/

Barmag Texturing FK6-1000

Quantity: 1, Year: 2009, 240 spindle, Single yarn path, 3 roller, With nozzle, Stopped on the mill floor.

AA91/261020D/LL-L/F/AR/

Techniservice Airtex Texturizers

Quantity: 5, Year: 2008 thru 2013. With Leesona winders. Currently producing turf thatch yarns. Voltage is 400 VAC / 3 Ph / 50-60 Hz.

AE51/150920E/PI-AI/M/AQ/

MENEGATTO Texturizing Machine

Quantity: 1, Year: 2002, Mod. TMA , 168 position

AE51/150920E/PI-AI/M/

GIUDICI Frictions Texturizing Machine

Quantity: 1, Year: 2002, mod .TG30 FA , 84 position

AA81/080920D/LI-T/C/BC/

AIKI (Japan) Draw Texturrizing

Quantity: 3, Year: 2003, 2004, 2005, Type : TH-211., 192 spl.
Single Heater. Max. Speed : 180 MPM, Method : 3 R/O Nip System. Best for high quality yarn.
Detailed spec. as per below:
Equipped with Special Creel ( Creel with Rotating Bobbins for Split Yarn)
For Normal Yarn, just remove this device.
Detailed Spec. as per attached sheets.
Status : Stop in floor recenty, all Complete and good Condition.

AF88/150820D/AIR.P-L/M/BA/

Barmag Texturizing Machines

Quantity: 1, Year: 2010 , Type: FK6-1000 -V , 240 Spindles

AC29/180620D/AOI-AI/M/AS/

Barmag Fk6-1000

Quantity: 1, Year: 2003, 240 spindles , Single, 2 oven

AF98/180620D/ACO-AC/BT/

Barmag Texturizing FK6-1000 V & Compressor ATLAS COPCO

Barmag Texturizing FK6-1000 V
Quantity:1, Year:2004, 240 Spindle

Compressor ATLAS COPCO GA 132
Quantity: 1, Year : 1998, Power 132 KW, The compressor serviced by Atlas Copco, Volume flow: 24m³/min,Max Working PRESSURE PSIG: 7.5 Bar, VOLTS 380, 3 PHASE

Running condition, FOR SALE COMPLETE

AD76/150620/AS/

Giudici RG30 TA Brand Air Texturing Machine Yarn Machine

AD76/150620E/YL-L/C/AS/

Giudici RG30 TA Brand Air Texturing

Quantity: 1, Year: 1997, 36 spindles,automatic feeding system,heberlein jet,godet heat up to 130 centigrade degrees,

AD76/150620E/PA-T/C/AS/

Giudici RG30 TA Brand Air Texturing

Quantity: 1, Year: 1999, 36 spindles,automatic feeding system,heberlein jet,godet heat up to 130 centigrade degrees,

SITUATION: DISMANTLED/AT WAREHOUSE

AD76/150620D/PT-T/C/AS/

SSM Air Texturing Machine

Quantity: 1, Year: 2003, 12 spindles, furnace,, auto offing,, creel system included,, SITUATION: INSTALLED and RUNNING

AD76/120620D/RI.L-R/C/AS/

Giudici TG30FA Texturizing Machine

Quantity: 1, year: 2000, For polyester and nylon yarn, 12 spindles, can produce yarn between 50 denier and 600 denier, Production capacity for , 0 denier 120 kg/day, Production capacity for 300 denier 280 kg/day, CONDITION : Installed and running situation
material can be run: PET, POY or FDY, Possible to run both
Single heater and double heater possible
Run speed: For 150 denier polyester yarn 1000-1100 rpm
similar machines are still produced by the company SSM Giudici.Also we can provide all spare parts from Turkey,
Technical staff in charge says only part that will give is air valve
typical DPF denier per filament range that is ran: Between 7-600 filament, polypropylene, polyester, nylon, micro, all possible.
It can be used for all kind of fabric (knitted, woven etc.), for all kind of texturising applications, special setting can be made for special yarn.
Double ply possible
Machine connection 50 Kw
Electricity consumption between 25-30 kw when used with full capacity.
For yarn pointing; 8 bar minumum, 75 kw is required
floor space and height requirement: 3.5 mt height, 5 mt width, 5 mt length
NOTE: As machine has been stopped for sometime, the CODES for Software programming is not available and thus they have contacted SSM Giudici, but SSM Giudici said that they dont have the CODES for year 2000 and they can reprogram and put new PLC. Perhaps price tag is big. Our Turkish associate says that they can do this against extra cost. We can get a quote if you decide to go for this machine.
For USD 5,000 additional, new electric panel cost will be provided by our company.

AD30/230520D/API-AI/M/AS/

Giudici Air Texturizing

Quantity: 3, Year: 2002, 2003,2004, Denier ranges – 300 den to 2000 den, Feeding : 6 ends, Bobbins weight: 6 kg, Tube type: height: 20 mm diameter:62 mm. Standard dty tube, Production: 3.5 tons/machine/day at 1100 den ATY. POY: 300 den rw sd 6 ends., They are producing AIR TEXTURED yarn for carpet end uses 600 den to 1800 den polyester.Machine working for carpet type yarn from Polyester, PP also can produce Nylon,
1 machine 32 positions & 5 godets, Model: RGTA, Year: 2005, 1 machine 36 positions & 3 godets, Model: RGTA, Year: 2003, 1 machine 36 positions & 5 godets, Model: RGTA, Year: 2004, running conditions.

AE56/040520D/APP-AP/C/BA/

Barmag Texturing

Quantity: 2, Year: 2011
Model: FK6-1000, 240 spindle, Single roller, Single yarn path, With air jet, No online tension device, Running condition

AC11/070120/

Muratec 33H DTY

Quantity: 10, Year: 2000, 216 spindle, Running condition

AC11/070120/

Muratec ATF-12 DTY

Quantity: 10, Year: 2002, 240spindle

AD22/030120/BA/

Barmag Texturing

Quantity: 4, Year: 2011-2012, Model FK6V-1000, 240 spindle, With tension device, Running in the mill floor