AA10/270923/AQ/
KUSTERS Calender
Quantity: 1, Year: 1987, mod.213.70.3800
table width 4000 mm., working width 3800 mm., 3 cylinders (steel, polyamide, satin steel), axial /tangential rolling up system, diathermic oil heating, control panel, unwinder with dancer BERICO, 2 metaldetectors EL, 2 slatted widening cylinders, fittings.
AA10/270923/AQ/
Kusters Calender
Quantity: 1, Year: 1995, mod. 212.60-2800, Table width 3000 mm., Working width 2800 mm., Pressure max 60 tons., Gas heating, Metaldetector, 2 cylinders dia.420 mm. about, Tangential winding arm.
AB55/180923/BO/
Monforts Sanforizer
Quantity: 1, Year: 2014, Roller Width 3400 mm, Working Width 3200 mm, Rubber belt is good condition, Weko system installed, In very good condition on mill. floor
AD63/140923/
Mario Crosta Calender Rotary Press Line
Quantity: 1, Year: 1980, reconditioning: 2016, Model: C.S.B./A, Rotary press cylinder width: 1.850 mm., Useful working height: 1.700 mm, The main motor has been replaced with a new motor and a new inverter, Fabric entry from plate or roll, Fabric exit from motorized cylinder (it is without folding device).
AD63/140923/
Monforts Toptex W Sanforizing
Quantity: 1, Year: 1988, Suitable for knitting and woven fabrics, Model: TOPTEX-W, Rubber ring width: 2,240 mm., Useful working width: 2,050 mm., Fabric entry: from plate or big roll through axial unwinder, Vaporization cylinder, Shrinking unit, Cooling cylinder, Rolling machine with slatted conveyor belt to avoid pulling on the fabric, Suitable for knitting and woven fabrics.
*AD26/260823E/SO-P/F/AQ/
Kusters Calender
Quantity: 1, Year: 1989, Type 212-7-3200. Unroller, CEIA Metal detector. Working Platform., 2 Bowls. 1 Stainless Steel, and 1 Racolan width 3.150 mm. (1 Racolan for spare of 3.400 mm R.W.) , Gas Heated. Exit by Big Batcher for A-Frame. 1 x 40HC Container.
AC96/140823/AA/
RAMISCH KLEINEWEFERS Calender
Quantity: 1, Year: 1990
Type: RKK 3100, No of rollers: 3, Roller width: 3400 mm, Fabric width: 3300 mm, System: Nipco I Flex Escher Wyss
Upper roller:steel, electro-hot water heating (new in 2019), Mid roller: Racolan Nipco I
Line pressure: 300 N, Below roller: Rubber roller for special effects, Seam detector: Elektrotex
Metal detector: E+L MDA 0104, A-frame un-rolling device: ZÃ llig
A-frame up-rolling device: Zà llig, Plaiter: Zöllig
Unload system: Haug (entry & exit), SIEMENS control:new installed in 2019, Foundation measurements: 6200 x 3200 mm
AE56/020823/
Morrison Sanforizing
Quantity: 1, Year: 2005, Roller width 300cm, Drum dia 2 meters, Steam heated, Robber blanket Thickness 5cm, Stopped in the mills.
AB09/310723/
Ramisch Kleinewefers Calender
Quantity: 1, Year: 1993, working width 1.800 mm, produces cotton –polyester .viscose shirting fabric3 cylinders, set up of cylinders: upper roller of steel dia 340 mm, electrical heating,hot water, middle roller of Racolan dia 497 mm, lower roller of paper dia 550 mm, 37 kw with inverter control, with metal detector , heating: electrical heating,hot water,machine is in good conditionmachine is running 60 m /min., can be also faster. Running condition.
AD92/120723E/ACS-S/F/BG/
Cibitex Sanforizing
Quantity: 1, Year: 1993, 3.200 mm, Has a special palmer, developed by Cibitex for a big width, with a new blanket. Also the rubber belt have been replaced in March 2023. Machine is in production.
AB60/290623/
Transfer Calander MURATEX
Quantity: 1, Year: 2020, Type 800/3400mm working width 3400mm, automatic sewing unit and J box unit, merrow usa brand sewing machine, folding unit, motorized batching arm for A frames, fabric centering roll, extraction head, 2 pcs antistatic bars, cooling fan for fabric exit, hard chromium covered main drum.
AH05/230623E/PC-O/F/AQ/
Kusters Calender
Quantity: 1, Year: 1995
Cylinders table: 2000 mm, Calender cylinders: no.2 (no.1 upper cylinder is cromed, no.1 lower cylinder is covered)
Upper cylinder: diam. abt. 400 mm, cromed. Cylinder in fix position, drived by a motorgearbox. Heating system by oil, through your boiler, Lower cylinder: diam. abt. 400 mm, covered in Racolan. The thickness of the Racolan is abt. 40 mm. The cylinder is idle, not motorized and no heated. The movement up-down is drived by an hydraulic unit. Fabric entry: big roll form, on trolley, Fabric exit: A-Frame batcher, drived by an hydraulic unit, Machine dimensions: abt. m 4900 L x 4000 W x 3200 H, included entry ed exit fabric groups, Feeding voltage: 380 V./50 Hz.
NOTE:
Price does not include packing
Year of make: 1995 (to be confirmed)
AD26/260523E/TI-C.L/M/AQ/
Biella Shrunk Sanforizer
Quantity: 1, Year: 2000, Model KD Suprema 95, Wool sanforizer, With autoclave diam.1500 mm. Complete of Corino weftstraightener model FLC3.

AB55/140523/
MONFORTS SANFOR
QUANTITY: 1, Year: 1989, MOD. MONFORTEX , USEFUL WIDTH 3400,
MADE OF : INLET EXECUTION FROM BIG ROLL OR PLATE ,
CENTERING DEVICE, 1 STEAM HEATED CYLINDER ,
1 STENTERING FRAME LENGHT 3000 MM WITH HORIZONTAL CHAIN COMPLETE WITH STEAM BOX AND SUPPORTING CENTRAL FRAME ,
1 RUBBER BELT COMPACTING UNIT COMPLETE OF RECTIFICATION CYLINDER ,
1 FELT CALENDER DIAMETER 2500 MM COMPLETE WITH DRYING CYLINDER FOR THE FELT DIAM 800 MM,
1 OUTLET FRAME COMPLETE OF COOLING CILINDER, AND SURFACE WINDER FOR BIG ROLL. OR PLATER

AD05/050523E/ARL-AI/F/
Monforts Sanforizing
QUANTITY: 1YEAR: 1989, MOD. MONFORTEX, USEFUL WIDTH 3400, MADE OF : INLET EXECUTION FROM BIG ROLL OR PLATE , CENTERING DEVICE, 1 STEAM HEATED CYLINDER , 1 STENTERING FRAME LENGHT 3000 MM WITH HORIZONTAL CHAIN COMPLETE WITH STEAM BOX AND SUPPORTING CENTRAL FRAME , 1 RUBBER BELT COMPACTING UNIT COMPLETE OF RECTIFICATION CYLINDER , 1 FELT CALENDER DIAMETER 2500 MM COMPLETE WITH DRYING CYLINDER FOR THE FELT DIAM 800 MM, 1 OUTLET FRAME COMPLETE OF COOLING CILINDER, AND SURFACE WINDER FOR BIG ROLL. OR PLATER
Machine is renewed 2015-16
AB05/040523E/CRL-CI/F/AN/
Monforts Sanforizing Monfortex
Quantity: 1, Year: 2005
Suitable for fabric width of either upto 2.200 mm or upto 2.800 mm due to 2 RUBBER CALANDER.
Comprising out of 2 rubber calander.
High cloth feeding device width edge uncurlers and guiding units make ERHARDT & LEIMER type KF 2020.
Entrance feeding with roller width of 3.200 mm, feeding into entrance of sanforizing with pulling roller.
Steaming cylinder of diameter 600 mm, feeding into levelling frame with upper roller width of 3.150 mm, length of levelling frame 6,0 mtr.
Optoelectronic width control.
Horizontal clip chain, overfeeding, working panel by MONFORTS SATELITE CONTROL.
Entrance into 1st. rubber calander with a rubber blanket width of 2.350 mm make MONFORTS, deviation or feeding into 2nd. rubber calander make MONFORTS with upper roller rubber blanket width of 2.960 mm.
Feeding into felt calander with a felt blanket width of 2.820 mm.
Heating and drying cylinder of diameter 2.000/800 mm.
Exit by center cutting device onto plaiter or onto high pile folding delivery or alternatively onto big batch winder with edge and optoelectronic edge control winding, LENZE INVERTER.
On mill floor, in production.
High quality and excellent condition.
Dismantling, packing, loading is included:
Professional electric and mechanic marking and visual documentation, Professional electric and mechanic disconnection, packing onto, Wooden skids, pallets, units, boxes for safe load and unload as well as, Foil wrapping of the dismantled components including marking of each package, Documentation before and during dismantling and loading.
Note: The offered SANFORIZING MACHINE is TAILORMADE for the factory in Germany. They have 2 rubber calander whereas they either use upto 2200 fabric width or 2.850 mm fabric width. The smaller as well as the wider rubber calander can be deviated and to be in use for their fabric width being flexible in their fabric width. That is reason why this SANFOR has the multi optimal option being ready for the fabrics the market requires.
AA10/030423/
KUSTERS Calender
Quantity: 1, Year: 1990, mod.212.70-3200
table width 3400 mm., working width 3200 mm., gas heating
Tangential unwinding arm with synchro dancer roller, Metaldetector group, Sewing Detector, Double widening bar, 2 Cylinders (upper steel, lower polyamide), Tangential winding arm.
AA23/061022E/AAP-AI/F/AZ/
Cibitex Sanforizing
Quantity: 1, Year: 2013, Model: Shrinktex, Type Shrinkage line, Very little used, Rollers width: 2600 mm, Iron shaft DIAMETER 100 cm (the felt moves with the fabric along this shaft), Computer control PLC, Touch pannel, working width – up to 225cm, Steam heating. Felt width 248 cm, Working width – up to 225cm, Steam heating, 966 hours of work, Electric power supply: 400 V, 50 Hz, 3 Ph, 72 A, 35 kW, Machine is like new.
AA02/080323/
Complete Denim Finishing Line
PAD STEAM & MERCERISING LINE:
1x KUSTERS-CALICO COMBINED PAD STEAM / MERCERISING LINE
Model CPSWR-CMR
Working width 2 meter
Comprised of:
Pad Steam:
Entry Scray
Tension rollers stands
E&L Air Guiders
4 Roller Brusher
4 Burner Singer
4 Roller Brusher
Dye Pad:
Kusters 2 Roller Dye Pad
Kusters Tight strand steamer with
28 top and bottom rollers
Kusters 2 Rubber roller pad
Mercerizing:
Kusters Roller Mercerizing with Bypass Lane
20 rollers
Washing:
7 Kusters Wash Boxes
Single lace with 5 top and 6 bottom rollers
Each with Rubber over Rubber Nip rollers
6 with 5-ton Nip and 1 with 10 Ton Nip capacity
Drying:
Tensioning stand
2 Stacks of Drying cans
Each with 12 cans x 2-meter-wide x 30-inch diameter
Steam heated
Exit:
E&L edge Guiders
With A Frame take up
Year: 2011
DENIM FINISHING & SANFORIZING:
1x KUSTERS-CALICO FINISHING RANGE
Model LF-SR-DWR-1282 3
Comprised of:
Entry Scray
Tension Bar
1 set of E&L Edge Guiders
1 set of Pull rolls
4 Roller Brusher
Operators’ platform
4 Burner Singer
4 Roller Brusher
Tensioning device
3 Kusters single lace wash boxes
Each with 5 top and 6 bottom rolls
And 5-ton Rubber over Rubber Nip Rollers on each box
1 Pre-Dryer with 6 cans, 2-meter x 30-inch diameter
Steam heated
1 Kusters Dye Padder Model LF-SR-DWR-1282.3 (no rolls)
1 Kusters Double Lace Wash Box
With 6 top and 4 bottom rollers
1 Kusters Resin Pad, single roller, inflatable
Model LF-SR-DWR-12823
1 Pleva Sensor control system
With AF.110 contact Free online measurement
Moisture RR .3 Mono with 3 Tandematic Sensors
Straight line SL2.1 with SD1C traversing camera
Drying with 2 stacks of 12 cans
78-inch face width x 30-inch diameter and
Tensioning Device
Year: 2011
With:
1x BRUCKNER SANFORIZER
Model Power Shrink GBK-FK18
Comprised of:
1 Bruckner Open Stenter
2-meter working with
With horizontal return
Clip chain
1 Bruckner Power Shrink Sanforizing Unit
With 2-meter-wide Rubber Belt
1 Bruckner 2 Drum Palmer
With Felt blanket
4 Cooling Cans 2 meters wide x 30-inch diameter
With KKTKRAUS refrigeration unit
Type KLB32T
Exit to Plaiter
Year: 2011
AE56/240223D/ARL-AI/F/
Monforts Sanforizing
Quantity: 1, Year: 2007, Working Width 180cm, Cylinder dia 2 meters, Rubber blanket thickness 5.5CM, Steam heated.
AB55/220223/
Kuster Calender Line
Quantity: 1, Year: 1995
Model 212.60 2800 , gas heated, Width:2800MM
Inlet combination with Metal detector, imbarraggio d’entrata con metaldetector
2 bowls calender Model 212.60 2800 1995 Upper Cilinder Diameter 420 mm in stainless steel /Lower Cilinder Diameter 420 in PA)
Surface Winder (tangential)
AA10/180123/
Cibitex Sanforising Machine
Quantity: 1, Year 2013, machine like new with
Working width 240 cm, Palmer width 250 cm; diameter 1000 mm
AB28/130123/
Ramisch Kleinewefers Calender
Quantity: 1, 2-bowl rolling smoothing and high glaze calander type NIPCO-I model RKK, 3000 mm face roller width, 2800 mm working width, Top bowl steel chromed (electro hot water heated) diameter 380 mm, Bottom bowl Racolan (NIPCO-roll original ESCHER WYSS) diameter 500 mm (newer grinded/turned), Electrical heated.
AB09/121222/
Kusters Calender
Quantity: 1, Year: 1982, Type: 213.50-1800, 3 cylinders, Oil heated, With oil heater and Menzel batcher. Running condition.
AA23/161122E/OO-AI/F/
Santex Sanforizing
Quantity: 1, Year: 2004, Model Santacompact 240 , Working width 240 cm, Entry with warm wheel and LaMaire spreading devices
Needle vertical chain, Presteaming
edge glueing and infra red edge dryeing and edge cutters before sanforizing
Main sanforizing head
J-box for fabric magazine and relax, Delivery on rolls or carriages
Machine complete, running. Available against payment .
AA23/270822/
Cibitex Sanforizing
Quantity: 1, Year: 1988, 170 cm w.width, Felt 18 meters, 2 heat rollers.
AA23/071122E/PI-AI/F/
Compactor Sanfor Line FERRARO-MUZZI
A line composed of :
Infeed with Corino weft streightner
Long entry with steaming
Muzzi Sanfor with rubber belt 216 cm wide
Ferraro compactor with felt 255 cm width
Delivery to plaiter
Speed – 60 m/min but practical depending on fabric ( 20-125m was run )
AD22/031122/
Monforts Sanforizing
Quantity: 1, Year: 2007, Germany Origin , Roller Width: 340cm, Working Width: 320cm, Stopped in the mill floor.
AB55/021122E/AYP-AR/F/AQ/
GUARNERI COMPLETE FINISHING CALENDER LINE
YEAR: 1995, WIDTH: 3400mm, USEFUL WIDTH: 3200
GUARNIERI, MOD. E470, 422.54,
COMPOSED OF:
INLET FROM BIG ROLL WITH METAL DETECTOR AND STEAM DETECTOR, WEFT STRAIGHTNER BIANCO, 4 BOWL CALENDER, IN VERTICAL EXECUTION, MADE OF 2 STAINLESS STEEL CYLINDERS AND 2 CYLINDERS IN COTTON, DIATERMIC OIL HEATED, PRESSURE 70 TON, EXIT ON BIG ROLL WITH SURFACE WINDER, WITH ALL ACCESSORIES, INSTALLED & RUNNING.
AB05/211022/AN/
CALANDER MACHINE
1 x RAMISCH 6 ROLL CALANDER, 2.400 mm upper roller width, year 1970
1 x RAMISCH KLEINEWEFERS 5 ROLL CALANDER NIPCO STAR „Y“, year 1991, 2.600 mm roller width, 2 electro hot water heating cylinder, 1 roller RACOLAN, 2 COTTON roller
AD78/171022/
Kusters Calender 3 Rolls S-Walze
Quantity: 1, Year 1990, model: 213.50-1800 roll width:_ 2000 mm work width: 1900 mm year: 1990 calander 3 rolls pressure 300kg/cm – 60 tons
AA23/061022/
Santex Sanforizing
Quantity: 1, Year: 2004, 240 cm, (presteaming, edge cutting, sanfor felt , delivery on roll or plaiter)
AG74/071022E/AC-R/M/
Best Trasfer Printing Calender
Quantity: 1, Year: 2017, mod. ZS, ww.mm.2000, Heating system: electric, Introduction and return same side (table mtl 4).
AA23/061022/
Ramisch Calander
Quantity: 1, Year: 1983, w.w 1600mm ( roller width 1800) 3 bowl, Electric heating.
AD92/031022/
Calendar Ramisch Guarneri
Quantity: 1, Year: 2001, w.w. 3.20 m, 80 ton, oil, 3 cylinders
AB05/220922/
CALANDER MAKE KÜSTERS Type 212.40.2600
Quantity: 1, 2.800 mm upper roller width, suitable for a fabric width of upto 2.600 mm, 2 cylinder in I-form, upper roller stainless steel, chromized, polished, electro hot water heating, year of make 1994/1995, high cloth feeding, stainless steel guide and feeding rollers, edge control make ERHARDT & LEIMER type KF2020, metal detector, sewing detector, entrance into 2 roll calander with top roller stainless steel, lower roller KÜSTERS swimming S-roller by RACOLAN NYLON 6/6 sleeve, diameter 320 mm, racolan edge cooling. 40 tons pressure, speed upto 80 mtr/min, soft nip roller delivery onto bow roller and A-frame winder, INVERTER, KLÖCKNER MÖLLER MII-111-VE VISUALISATION
AB05/220922/
CALANDER Make KÜSTERS
Quantity: 1, Year: 1994, type 212.40.2400, 2 cylinder comprising out of upper cylinder stainless steel, chromized, polished, electro hot water heating, lower roller KÜSTERS swimming S-roll width RACOLAN NYLON 6/6 sleeve, upper roller width 2.600 mm, feeding device, bow roller, entrance into calander, LAUER PCS95 TOPLINE MINI SEMI electronic control, KEB INVERTER, delivery onto big batcher, 40 tons pressure, racolan edge cooling, KLÖCKNER MÖLLER MI-111-VE VISUALISATION
AA10/270922/
Steaming, Sanforising and Compacting unit
Consisting of:
1 CORINO Centering Device
1 FERRARO Stenter Type COMPTEX CUD/ARF 2500, year 2004
1 MUZZI Sanforising machine, rubber belt width 2m16
1 FERRARO compactor Type COMPTEX, year 2004, felt width 2m55, Batching delivery
AA10/190922/
KUSTERS Calander For Woven Fabrics
Quantity: 1
Year: 1995
Type 212.50.2200
Working width 2m20, 60 tons, Gas heating, Suitable for Chintz effect and embossing
1 Steel cylinder diameter 400 mm,
1 Floating cylinder, FLEXROLL, sleeve diameter 435 mm
AC09/020922D/RYP-CR/F/BQ/
Ramisch Guarneri Calendar
Quantity: 1, Year: 2006, Type RGK NIPCO L, Roller width 3600 mm, Working width 3400 mm.
Cloth feeding frame, Metal detector, E+L cloth guider, Electronic selvedge feeding device, 2 recron rolls , 1 steel rolls, Oil heated, Exit with batche
AD63/220822/
KMT Transfer Calender For Transfer Printing Oil Heated
Quantity: 1, Year: 2003, Model: Combi 2025 RA, Roller width: 2.500 mm, Working width: 2.000 mm, Roller diameter: 2.000 mm, Machine equipped with no-stop system, Machine equipped with inspection table, Delivery in small roller, Heating system: diathermic oil, Machine not use electric resistances but the circulation of diatermic oil heated by a centralized boiler. Machine is supplied without boiler. Machine is in excellent conditions.
AC09/020822D/RA-L/F/BQ/
Dhall Sanforiser
Quantity: 1, Year: 2006, Roll width: 3400 mm, Working: 3200 mm, Fabric feeding high frame, Traction roll, Expander roll and tension bars, J scary
E+L guider roll, Damping unit, Single cooling cylinder, Rubber unit
Blanket roll : 3200mm, Rubber thickness :55mm, Palmar unit Dia :2000 mm
Cooling cylinder, J scary, E+L giuder, Plaiter and batcher
AA26/190722D/YO-O/F/DL/
Ramisch Calender
Quantity: 1, 3 Bowl, Roll width: 220cm
Roll consist of: Steel Roll by Electric heating, Plastic Roll, Pressure: By Hydraulic 50 Ton Max., 40Ftx 1 Container.
AG51/080722/
Morrison Sanforizing Machine
Quantity: 1, Year: 2003, 2050mm roller width, drum dia 2000mm,robber blanket Thickness 60mm, Running condition