Quantity: 1, Year: 2013, mod.SINCRO/T 140, 24 heads, 8″, yarnguide with autom. ‎tension device.‎

Quantity: 26
Year: The equipment is from 2011 but it’s practically new. They only used it for tests.
Model: EW 800
(adequate to spool tows from 1k to 80k and produce spools with a maximum weight of 350 kg)
The winders are not assembled.
The 26 Winders are controlled by 3 control panel divided in 8+9+9 winders. Control panel 1 (8 winders) is the main control panel which means to assemble one of the others set of winders (9) you need always to have the main control panel assembled. If, by any case, you’d want to assemble the winders in different locations you’d have to ensure they all have communication with control panel 1.
Machine specification:
-drive by reinforced threephase A.C. motor 1,1 kW, 6-pole in connection with frequency converter
-tension controller adjustable for tension ranges from 200 to 2.500 g for 3-48 K or 600 up to 4800 g, with exchange pneumatic cylinder for 48-72 K, with adjustability of a relaxing yarn tension via proportional pressure regulation valve, pre-selectable via display
-speed range 100 m/min.
-starting speed from 10 mlmin.
-1 input terminal for input, control and display of production data in main cabinet on line end
-Line-speed-signal data-exchange to Precursor Machines either via analog-signals or communication-protocol (CC-Link, Device-Net or Profibus)
-Data-exchange to Auto-doffing-robot (line machine number, winding period, doffin9-time, bobbin-weight, operator login, winder-no., yarn length); Exact protocol has to be specified.
-Oracle database is not in the scope from Dietze & Schell
-HMI-terminal used for receipes, alarms;
-If communication between HMI and winder fails, winder should continue to run
-first deflection roller adjustable
-traverse mechanism with double grooved scroll cam for traverse length of 800 mm
-support for traverse box with linear movement
-traverse mechanism with separate drive
-pressure roller with special surface finishing – upgraded version with shafts for easy bearing remount
-maximum package diameter up to approx. 800 mm for the production of packages of max. 350 kg
-pressure load onto the package adjustable by compressed air via air cylinder from 2 to 14 kg, adjustability of counter pressure via proportional pressure regulation valve pre-selectable via display
-special winding arbor suitable for plastic or paper tubes 144+1 mm inside diameter x 820 +/- 1 mm long, outside diameter 164 +/- 0,5 mm – MODIFIED to 134 inside diameter x 852 MM long, outside diameter 157MM
-bobbin push-off system to push the full package forward on the spindle for easier doffing, see enclosed layout drawing
-reverse stop for influence of package formation with improved connection parts
-prior notice and notice of full package
-yellow lamp for prior notice (blinking) and full package and red lamp for yarn breakage
-crossing ratio adjustable via display
-starting of the winder by button
-stopping by pressure button
-spindle braking device
-height of top roller approx. 1900 mm
-all compressed air action calculated for a max. pressure of 6 bar
-spindle height approx. 676 mm
-hoses for pressure air made of Polyurethane
-suction device with hand lever at machine
-time counter and meter counter at machine
-all rolls coated mat hard chrome with orange peel effect Machine mounted on a frame
Machine features:
machine colour – blue
supply voltage – 3 N PE 400 V 50 Hz

Quantity: 1, Year: 1999, Model 548.3 , 2 x 72 positions with (3) draw zones, 2 x sets heated godets, Suitable for PET, PA6, PA66, 60 ~ 560 dtex

Quantity: 2, Year: 2004, Each 72 spindles, Exit 6 inch, 3 ply, One machine one side, Second machine 2 sides.

QUANTITY: 1, TYPE SINCRO, NUMBER 25 POSITIONS, ALL POSITIONS RUNNING CONDICTIONS, HEVERLEIN JET, Computer Control.

Quantity: 1, Year: 1998, 21 heads which fits 4 x 192 spindle machine for nm 4,5/2.
It is in excellent condition. All thermo splicers are on it. All spindles are working properly.‎Cops length 500mm.max,Take up bobin 10”, TK780

2x cone-to-cone winder MOTOCONO Model R104
Year 1994
nr 56 spindles
independent heads ( one motor each head )
pitch 6” (152 mm.)
Mecanical sensor
waxing device with rotating and counter-rotating motion
adjustable speed from 300 to 1200 mt. by potentiometer
Magitex Blower

1x cone-to-cone winder MOTOCONO Model R40
Year 1996
nr 56 spindles
independent heads ( one motor each head )
pitch 6” (152 mm.)
Electronic sensor,
waxing device with rotating and counter-rotating motion
adjustable speed from 300 to 1200 mt. by potentiometer
Magitex Blower

1x cone-to-cone winder MOTOCONO Model R60
Year 2001
60 spindles
independent heads ( one motor each head )
pitch 6” (152 mm.)
Electronic sensor
waxing device with rotating and counter-rotating motion
adjustable speed from 300 to 1200 mt. by potentiometer
Magitex Blower

Condition: dismanlted

Quantity: 12
Shrinking (H.B.) Machine Superba mod.Univap
Year: 2006
with n.10 heads each

With Superba machines it is possible to supply the following Cone winders:

n.3 Automatic cone winders Murata
Year: 1×1988 – 2×1990
with n.50 heads each

n.2 Automatic cone winders Murata
Year: 1998
with n.60 heads each

Quantity: 3, Mod. CLV200, 92 positions each.

Quantity: 5

4x Model R104 , Year: 1994
2 machine of the 60 spindles
2 machine of the 54 spindles
Independent heads ( one motor each head ), Pitch 6” (152 mm.)
Mecanical sensor, Waxing device with rotating and counter-rotating motion
Adjustable speed from 300 to 1200 mt. by potentiometer , Magitex Blower

1x Model L48 , Year: 2001
80 spindles
Independent heads ( one motor each head ), Pitch 6” (152 mm.)
Electronic sensor, Waxing device with rotating and counter-rotating motion
Adjustable speed from 300 to 1200 mt. by potentiometer, Magitex Blower

Quantity: 1, Year: 2005, Mod.SINCRO/RSD, With n.36 heads, Electronic yarn guide, Motorized tailstock, Precision crossing, Pitch 8″(200 mm) with the possibility to change it in 6″(152 mm), Conical tube length 230 mm, Diam.internal base 56 mm – diam.tip 30 mm, Feeding reel from small hanks size, Ceramic comb yarn brake, Positive overfeeder, Electronic sensor for tension regulation constant.

Quantity: 1, Year: 1999, MOD.L-42, Single side Main Unit Right, N.42 heads, Grooved drums 2 turns,variable step,diam.95 mm., Pitch 6″ (152 mm), Conicity 5°57′ on mandrel, Single head stop by optical sensor, Package size max.290 mm. Counter-rotating controlled waxing device, Double yarn brake for each head, Mechanical clearers, Head stop at required diameter, Variable speed from 300 to 1200 m/min. Through potentiometer, Creel from below with universal bobbin holder, One motor per head, Magitex with discharge from the sleeves, Mesdan Splicer system mod.ATS 114 with n.3, jontair, Volt 380 three-phase – 50/60 Hz.

Quantity: 2, Year: 2004, With n.36 heads each, Double side, Pitch 152 mm.(6″), Grooved drums 2 turns, parallel diam.82 mm, Conicity 4°20′ or cylindrical, “C” arm with tailstock, Counter-rotating controlled Waxing device, One yarn-stretcher each head, Mechanical clearer with micrometric check, Automatic stop at required diameter, Adjustable speed from 300 to 1200 mt./min., Main unit with speed regulation read on, Digital display
Meter counter, Electric Power supply 400/3 – 50/60 Hz.

Quantity: 2, Year: 1997, N.36 heads each, Double side, Corsa 6″(152 mm), Conicity 5°57′ arm with mandrel, Grooved drums diam.82 mm 2,5 turns variable pitch, Motorized waxing device, Mechanical clearer, N.1 Magitex per two machines.

Quantity: 2, Mod.BR, Year: 1997, N.36 heads each, Double side, Pitch 6″ (152 mm), Conicity 5°57′ arm with Mandrel, Grooved drum diam.82 mm 2,5 turns,variable pitch, Motorized waxing device, Mechanical clearer, Meter counter, N.1 Magitex for two machine, Splicer Mesdan plant mod.ATS aquasplicer mod.928 B, (n.1 jointair per machine).

Quantity: 2, Year: 1995, Mod.CLV/C200, n.116 spindles each, Meter counter and cutters Seleme Asure(Japan), Suitable for standard cops, bottle cops and pin cops.

Quantity: 1, Year: 1985, 90 heads, 250 mm winding width, Tube dia. 93 mm and conical.