AB46/150323/
Menzel Coating range
General description:
Different methods of production can be realized, machine is designed for coating on a precisely high coating roller or as an air doctor blade.
Equipped with a collision control system
Machine consists of:
lower frame and coating head with length, beam and knife adjustment,
coating roller with stripping doctor device (which helps to remove residues from the rear roller),
brake, paste limitation, paste supply, control panel
Lacquering device – serves for lacquering the before coated material.
Consists of a frame, engraved roller, pressure roller, medium basin and medium limitation.
Coating beams adjusted with servo drive controlled via the control panel from which all functions of the machine a centrally controlled.
Coating knives: adjustable
Dryer – 10 heat sections and a cooling section, 2 sections each are combined in one temperature zone.
Cooling Section : 2 fresh air ventilator
Mahlo coating thickness verifier system, entry and exit
1 Preheating unit for fabric, run with hot water
Heat exchanger & transfer by H.E.A.T. Inc
Model KM550-80-483 , 80 Kw, yoc 2005, max. temp. 550 F, max. press. 75 psig, 480V 60 Hz
Specifications:
Year: 2005
Roller width: 2800 mm.
Coating roller with doctor stripping device
Coating beam equipped with 2 coating knives
Material width: 2600 mm.
Speed: 3-35 m/min.
Burner Capacity: Zone 1 (inlet) 150 Kw, Zones 2-5 100 Kw
Voltage: 3x 480 V AC, +/- 10%
Frequency: 60 Hz
Control Voltage: 24 V DC
Compressed air: 6 bar
AE69/260123/
Lafer Shearing Machine for Embroidery
Quantity: 1, Model: CMI1, Width 2200 mm, Fabric introduction with METAL DETECTOR and CENTERING UNIT. Operator platform. Brush to lift the threads. Rear brush. Adjustable spiral expanding cylinders. Electrostatic bar before the shearing unit. Belt stretchers before the group. Blowing system under the fabric, to lift embroydery threads. Shearing unit. Inverter-controlled fabric folder. Machine with inverter control and microprocessor control. Air conditioner for electrical system Safety protections. Machine with speciall accessories suitable to split and shear the back side yarns of embroidery fabrics, the machine is in excellent conditions and has very low running hours, dismantled and loaded onto container.
AC93/240123E/YS-Y/F/
Mario Crosta Shearing
Quantity: 1, Year: 2001, Roller Width 3250 mm, Type: C/90, 18 Blades.
AD92/181122/
Lafer Shearing
Model CMS-1, w.w. 2.20 m, With metal detector, Extra cutter culinder and plaiter.
AG12/171022E/TY-Y/C/BT/
Xetma Shearing
Quantity: 1, Year: 2009, For furnishings and curtains, Type. Optima XS1 3600, Made in Switzerland, Cutter width 360cm net, Electric consumption 12 kw, Air pressure. 6 bar, 23 blades.
AB60/101022/
Colombo PVC Lacquer Coating Machine
Quantity: 1, Year:2000, Working width 2600mm, A-frame axial unrolling device, 2 x COLOMBO heads for lacquering both faces, Dryer, Thermal oil cylinder diam. 800 mm, 2 cylinder cool calender, A-frame axial rolling device.
AA23/061022E/ARC-AO/M/AZ/
M-Tec Polishing Line Sistig
Quantity: 1, Year: 1998
Working width: 1800 mm, Power installed: 198 kW, Power use : 230 kVA, Compressed air: 60 l/min, 8 bar, Water consumption : about.150 l/h, Dust exhaust: fan M 600-KR
RANGE FOR FINISHING OF FLEECE FABRICS
M-TEC model SFS – System SISTIG
The SFS rang e is designed for finishing of Fabrics made of natural and chemical fibres and their blends: like chamois Feather (flock), velours, plushes, needled fabrics as well as any other fleece textiles.
Composition:
Shearing – Model SFS 180 with POLROTOR, Fllece lustering typ FPM-4, Shearing with integrated POLROTOR, Hydrodynamic padder, Compensation zone, Dedusting
AC93/010922E/LS-Y/F/BG/
Vollenweider Shearing TSF11
QUANTITY: 1, YEAR: 1998
TYPE: TSF11, ROLLER WIDTH: 2.600 MM, METAL DETECTOR, CORINO BRUSHING AND SPREADING TYPE FLC3 WITH DOGAL, ENTRANCE AND EXIT FROM THE SAME SIDE, EXIT BY FOLDER, DUST COLLECTOR AND PRESS ROOM SYSTEM.
Distance between blades: 20 mm, Depthless: 15 mm, The extraction suction system is very strong.
This is a very nice machine and now is located in warehouse in Europe ready for inspection.
It comes with one brand new spare shearing head still in the wooden box.
AE69/300522/
LINE OF MARIO CROSTA RASING SHEARING MACHINE
QUANTITY: 1, YEAR: 2005, MOD MC 10 ELECTRONIC AND SSC1, WW 2000MM 36 RAISING CYLINDERS AND NR.1 SHEARING WITH 20 BLADES IN TANDEM FOLDER AT EXIT , AC MOTORS INVERTERS AND TOUCH SCREEN COMPUTER.
AG12/180522E/LS-Y/C/BT/
Xetma Shearing Machine
Quantity: 1, Year: 2004, For furnishings and curtains, Type. Optima XS1 3600, Made in Switzerland, Cutter width 360cm net, Electric consumption 12 kw, Air pressure. 6 bar,24 blades complete, Running and very good condition
AG12/180522E/YR-R/C/BT/
Xetma Shearing Machine
Quantity: 1, Year: 2004, For furnishings and curtains, Type. Optima XS1 3600, Made in Switzerland, Cutter width 360cm net, Electric consumption 13kw, Air pressure. 6 bar, Available 18 blades out of a total of 24
AE69/170322/
COMET COMBINED POLISHING- SHEARING MACHINE
QUANTITY: 1, YEAR: 1994, MOD 128 C ,WW 1800MM NR.1 POLISHING CYLINDER AND NR.1 SHEARING CYLINDER, SUTABLE TO PROCESS IMITATION FUR HIGHT PILE FABRICS AND TERRY FABRICS, EXIT BY FOLDER.
AA02/080322/
Comet Shearing & Polishing Range
Consisting of the Following:
80″ Delivery (2 m)
Pull Roll Unit
BTM Metal Detector
BTM Double Roll Air Guider
BTM 7 Top and 7 Bottom, 75 Yard Capacity Accumulator Stand
BTM Stainless Steel Steam Box
BTM Double Roll Air Guider
Comet Model Combination SC KeyS/2001, Single Shear (22) edges on Revolver Tiger Shear Unit, (1998)
Comet Model Sirius/287 Electric Heated, Double Roll Tiger Brush, (1998),(4) Heated Rolls
Comet Model Orion/2200 Tiger Brush Single Shear, with (22) Edges on Revolver, (1998)
Comet Model 129/C Combination LC Electric, Headed Single Shear (22) Edges on Revolver, Polishing Drum, (New 1998)
Polishing Can 16” Dia. Electric Heated
BTM Double Air Guide
BTM 7 Top Roll and 7 Bottom Roll 75 Yard Capacity, Accumulator Stand
BTM Double Roll Air Guide
BTM Thru Wind Surface and Center Drive A-Frame Winder
AB82/090222/
Shearing & Brushing Machine Vollenweider
Quantity: 1, Year: 1999, Type Peerless TSF-1T, suitable for heavy duty, shearing width up to 190 cm (width of fabric), roller width 210 cm, stepless adjustable speed 3-30 Meter/min, shearing from top
AA10/310122E/RP-R/M/
CROSTA Shearing Machine
Quantity: 1 , Year: 2003, mod.SSC/A
cylinders width 2400 mm., Centering device on entry, foot board, velveting device, doble expander unit, Unroll selvedges, search seams, fold on exit, complete with suction plant.
AH05/081121/
Mario Crosta Shearing-Plaques Raising
Year: 1999
SHEARING MOD. SSC/A, with plaiter, table 1800 mm
PLAQUES RAISING MOD. GPT/A, plaiter, table 1800 mm
AD92/081121/
Lafer Shearing
Quantity: 1, Year: 2016, 2.80 m, With pol-rotor.(2500 hours ofwork), still running in mill floor.
AB60/291021/
Comet Shearing Line
Quantity: 2 machines for velvet fabrics
Year: 2000
(These 2 Machines Have Little Used!)
working width of 1800mm (although drawing shows 1700mm)
machines in very good condition as they have been used very little.
The SIRIUS has two functions: polishing or brushing.
The ORION has two functions: polishing and razor (shearing).
Orion = our shearing machine.
Sirius = our tigering machine.
AB46/091021/AR/
Menzel Coating Range
General description:
Different methods of production can be realized, machine is designed for coating on a precisely high coating roller or as an air doctor blade.
Equipped with a collision control system
Machine consists of:
lower frame and coating head with length, beam and knife adjustment,
coating roller with stripping doctor device (which helps to remove residues from the rear roller),
brake, paste limitation, paste supply, control panel
Lacquering device – serves for lacquering the before coated material.
Consists of a frame, engraved roller, pressure roller, medium basin and medium limitation.
Coating beams adjusted with servo drive controlled via the control panel from which all functions of the machine a centrally controlled.
Coating knives: adjustable
Dryer – 10 heat sections and a cooling section, 2 sections each are combined in one temperature zone.
Cooling Section : 2 fresh air ventilator
Mahlo coating thickness verifier system, entry and exit
1 Preheating unit for fabric, run with hot water
Heat exchanger & transfer by H.E.A.T. Inc
Model KM550-80-483 , 80 Kw, yoc 2005, max. temp. 550 F, max. press. 75 psig, 480V 60 Hz
Specifications:
Year: 2005
Roller width: 2800 mm.
Coating roller with doctor stripping device
Coating beam equipped with 2 coating knives
Material width: 2600 mm.
Speed: 3-35 m/min.
Burner Capacity: Zone 1 (inlet) 150 Kw, Zones 2-5 100 Kw
Voltage: 3x 480 V AC, +/- 10%
Frequency: 60 Hz
Control Voltage: 24 V DC
Compressed air: 6 bar
AE02/290721/
Lafer Knife Shearing Machine
Quantity: 1, Year: 1997, CMI 2 H 2000, 4 knifes, ww. 2000 mm
AG54/060621/
Mario Crosta Shearing
Quantity: 1, Year: 2008, Working width 2000mm. Incoming brush. Control panel with inverters and touch screen. Exit by plaiter or big roll pneumatic system. Accessories included : 1 motor for suction dust, Metal detector.