AH52/141222E/AY.L/M/AN/
Küsters 222.17/2800 / 881.63-2800 KKV Dyeing Foulard
Quantity: 1, Year: 2004, working width 2.800 mm, equipped with 2 hydraulic S-rollers, contact pressure adjustable over 3 segments, process control, make Küsters, visualization, BDE terminal, 3 storage tanks, pumps, piping, measuring/control technology, accessories, 1 paint dissolving station (location paint chamber), year 2000, SPS plant control, make Siemens, process visualization, agitator tank V2A, suction hood, storage tank V2A
AH52/141222E/CL/M/AN/
Brückner Stenter
Year 1983/1996/2019, , fabric width 2.800 mm, electro-pneum. brake f. Kaulen, spring balancer, padder, make Küsters, S-rolls, carrying roll, straightening unit/measuring station f. Fabric distortion, make Mahlo, type Orthomat, 6 measuring heads (optical measurement), infeed, gas dryer, 6 fields á L 3.000 mm, 12 gas burners, make Maxon, year 2019, control cabinet with CPU, make Siemens, type S7-300, burner control with touch panel. Type TP1500 (renewed in 2019, operating hours 3,600), control cabinet on pedestal, outlet with cooling and traversing roller, take-up system, adjustable stop for bobbin car, measuring station, make Mahlo, type Orthomat, 4 measuring heads (optical measurement), heat recovery system, make Scheuchl, with steel pedestal, exhaust and supply air fans, plant accessories, gas control station up to main shut-off valve.
AH52/141222E/YI/M/AN/
Mahlo WIS-12 / GCIS-12 Color Inspection System
Quantity: 1, Year 2007, working width max. 2.700 mm, unwinder, electric, slitter shaft with 4 roller knives, make Helios, type JS3, for edge trimming, with rewinder, defect marking system, make Testa, type Segnadifetti, , year 2010, with 3 IR markers, 2 defect monitoring system WIS, 8 cameras, make Dalsa, color monitoring system CIS, flying camera, electric rewinder drive
AH52/141222E/LI/M/AN/
Brugmann/Goller Bianco Wide Washing And Drying Machine
Quantity: 1, control panel, SPS-control (renewed in 2005), operator panel, type Simatic Multipanel Touch, process visualization, camera system, goods transport (drive technology renewed in 2006), 5 washing zones, drying zone, make. Goller, 10 heating drums, capacity 1,440 l each, working width max. 3,000 mm, 5 squeezing units with spreader rolls, pumps, piping, measuring/control technology, control cabinet system, platform (for dryer), make Stark, perm. load 300 kg/m², accessories
AH52/141222E/TI/M/AN/
SUPER TESTA ROSSA 1+P
Quantity: 1, Year: 2010, working width 3.200 mm, winding speed forward/reverse 0 – 1.500 mm/min., compressed air max. 7 bar, large bail, Ø 1.800 mm, consisting of. Unwinder for bobbins, inspection machine, cutting and gluing machine, rewinder with labeling and filming device, transfer station with conveyor belts and tilting device, pallet places, safety enclosure and equipment, PLC control, make Siemens, type S7, office terminal, touch screen monitor.
AH52/131022/AN/
Bruckner Stenter
Year: 1988, Fabric width 2.800 mm, roll width 3.000 mm, bobbin carriage, electro-pneum. brake for bobbins, spring balancer, coater, make Hofmann + Schwabe, year 1987, with traversing device, make Zimmer, type Chang-02-01, year 2002, gas dryer, 6 fields á L 3.000 mm, 12 gas burners, exhaust hood and cooling roller in the outlet, calender, make Ramisch Kleinewefers, type ING, year 1994, with Nipco roll, make Sulzer Escher Wyss, type TFD500 PA3000, year 1994, electr./hydr. calender carriage drive, adjustable calender carriage stop, control cabinet system, control panel, heat recovery system with steel platform, supply and exhaust air fans, measuring/control technology, accessories.
*AH52/131022/AN/
Bruckner Stenter
Year: 1985, Working width 2.500 mm, electr.-pneum. brake for bobbin unwinding, padder, make Goller, year 1986, infeed, measuring frame for fabric distortion, make Mahlo, 6 measuring heads (out of operation – functionality not guaranteed), dryer, steam heated, 4 chambers á L 3.000 mm, measuring device, make Mahlo, with 4 measuring heads (optical measurement), control (outfeed), outfeed with winder, hydr. driven, exhaust air system with fan, suction hood at outfeed and chimney, control, measuring/control technology, switch cabinet system, accessories.
*AH52/131022/AN/
Bruckner Stenter
Year: 2001, Roller width 3.000 mm, working width 2.700 mm, SPS-control, operator panel, make Siemens, type Simatic Multipanel, process visualization, BDE-terminal, 2 cameras, pneum. Brake for unwinding, coater / foam coater, make Johannes Zimmer, type RMR-RS-MR-MK 4328, year 2001
Gas dryer, 8 fields á L 3.000 mm, 16 burners, make Brückner/Eclipse, type RM 100 VEMR 300, outlet with 2 cooling rollers, calender, make Kleinewefers, type RKK 260, year 2001
Steam heated, with 1 chill roll, rewinder, make Brückner, with 1 winding station, drive for bobbin carriage, adjustable bobbin stop, supply and exhaust fans, heat recovery system, make Scheuchl, control cabinet system, piping with exhaust stack, measuring/control technology, machine accessories, gas control station up to main shut-off valve.
*AH52/131022/AN/
Babcock 5000-3.600 Stenter
Year: 1991, Type: 5000-3.600, Working width 2.000 mm, W. pneum. brake for unwinding of Kaule, spring balancer, padder, make Beta, drafting system, traversing roller, residual moisture measuring device, make Mahlo, type DMB10, gas dryer, 4 fields á L 3.000 mm, 4 burners, exhaust fan, piping, heat recovery system, make Scheuchl, on steel platform, control cabinet system, BDE terminal, machine accessories, gas control station up to main shut-off valve.
*AH52/131022/AN/
Monforts Montex 5000 10F Twin-Air Stenter Frame (abrasive backing production line)
Quantity: 1, operating hours counter: 28.440, fabric width min. / max. 600 / 2.000 mm, roll width 2.200 mm, speed 5 – 100 m/min, consisting of: pneum. brake for unwinding of Kaule, spring balancer, Klotzwerk/Foulard, make Monforts Matex, coater, make MPE, type TS 17-14 C, year 2006, gas dryer, m. 10 drying sections á L 3.000 mm, each with gas burner, make Max. gas burner, make Maxon and 2 fans, supply and exhaust air system with radial fans, piping, heat recovery system, air humidification/cleaning, make Koenig, with dosing system and control cabinet, control make. Allen Bradley (electrostatic filter out of operation), stainless steel exhaust stack, additional exhaust, make Helios, at the end dry duct, w. piping, clip and needle cleaning (transport chain), rewinder, make Monforts, type E.u.A. Kombi, y.o.m. 2002, with 1 rewinding station and 2 chill rolls, adjustable bobbin stop (self-made), water softener, make Elga Berkefeld, SPS-control, make Monforts, process visualization, machine accessories, gas distribution station (up to main slide)
*AH52/131022/AN/
Osthoff-Senge Impregnation and Singeing Plant
Year: 1998, Working width max. 2.700 mm
Control system (optimized in 2007), fabric infeed, make Menzel, type MV-1, year. 1994
Rapping unit, make Monforts Walzentechnik, year 2006, singeing station, type T 97, 2 gas burners
Rapping and brushing unit, make Osthoff-Senge, type VP 97
Sizing bath, make Goller
Squeezing unit, make Goller, year 1998
With rewind station, pumps, piping, measuring/control technology, exhaust system (modernized in 2003), accessories, steel platform with crane traverse with chain hoist, make Demag, load capacity 2 t.
*AH52/131022/AN/
Ramisch Kleinewefers Smoothing Calender
Year: 1988, Operating hours 69.500, upper cylinder electr. heated (Nipco), cylinder width 3.000 mm, unwinder, pneum. braked, spring balancer, hydr. rewinder, hydraulic power pack, seam ventilation, cutting/separating device, 5 roll squeezing knife, edge trimming, control cabinet, accessories, cooling unit for hydraulic oil.
*AH52/131022/AN/
Kusters 232-38-1800 Wide Washing Machine
Year: 1993, Type: 232-38-1800, Control station with operator panel, make Sutron, type BT 20, working width 1.800 mm, pneum. pneum. brake, fabric transport with 4 squeezing rollers (1x hydr. – S-roller), type 225.22-1800, 271.35-1800, 3 washing zones, discharge transport with rewinder, piping, pumps, measuring/control equipment, control cabinet, accessories.
*AH52/131022/AN/
Herzog GRW 2200 Precision Winding
Year: 2006, Type: GRW 2200, Working width 2.400 mm, length measuring system, swivel table, cutting roller, with 4 crushing knives, rewinder, PLC system control, operator panel, BDE terminal, exhaust system, make Höcker Polytechnik, crane system, make Demag, lifting capacity 2 t, with crane gantry and trolley, crane traverse, make Greubel, control cabinet system, accessories.
*AH52/131022/
Monforts Montex 6500 7 F Twin Air Stenter Frame (abrasive backing production line)
Quantity: 1, operating hours 16.481
PC-control, process visualization, fabric width min./max. 600 / 2.200 mm
roll width 2.200/2.400 mm, speed 5 – 100 m/min, L 36.194 mm, 2 electr. bobbin unwinder
double unwinder, make Menzel, y.o.m. 2008, (1 roll removed – not in use)
control panel, horizontal accumulator, capacity 4,000 mm, speed 50 m/min, coating station/coater, make Menzel, with air knife system, roll width 2,400 mm, speed 80 m/min
material thickness 0.15 mm (raw) / 1 mm (coated), tensile force 1,500 – 3,000 N
dryer with 7 chambers á L 3,000 mm, each with gas burner, make Max. gas burner
make Maxon and 2 fans, 2 chill rolls, clip cleaning in the outlet, infeed/outfeed station,
make Monforts, year 2008
supply and exhaust air system with radial fans, piping, coating unit, make Zimmer, type RMR-STM-2W-MKIV/395, year 2007, contact drying tunnel, paint brand Monforts, heating drum steam heated, with exhaust hood, rewinder, make Menzel, year 2008, with 2 rewinding stations, material width 2.200 mm, roll width 2.400 mm, speed 100m/min, control cabinet system
measuring and control technology, accessories, crane system, paint brand Demag, load capacity 3.200m/min. Demag
load capacity 3,200 kg, gas distribution station (up to main slide)
AH24/080822/
Karl Mayer Supertextronic Raschel Machine
Quantity: 1, Year: 1995, Type: MRSEJF 53/1/24 , Width: 152”, Gauge: E 24, Needle Rapport: 168 needles, Ground Bar: 1 2 (corder), Jacquard Bar: 1 split into 2, Fall Plate: 1, Pattern Bars: 47 24 front and 24 back, Lycra Bar: 1, Voltage Main Engine: 380 v 50 Hz, Needle Rapport: 168 needles.
AH24/080822/
Benninger Automatic Sectional Warping
Quantity: 1, Year: 2007, Model: Versomat, Maximum working width: 3.600 mm. Waxing device, Warping speed: up to max. 900 meters/minute. Beaming speed: max 200 m / min. Beaming winding tension: min. 200 N, max 700 N. Beam flange diameter: max 1000 mm. Electronic creel Benninger, year 2007. Creel with 550 positions (260 for each side). Pitch 28 x 28 Machine is few used. Good condition.
AB04/300522/BQ/
Complete Weaving & Finishing Plant
UNIT A
10x Sulzer Jacquard looms
Model: PU, Type: Projectile, Width (CMs): 390, Speed (RPM): 250
4x Sulzer Jacquard looms
Model: G6300, Type: Rapier, Width (CMs): 360, Speed (RPM): 360
1x Sulzer Jacquard looms
Model: G6300, Type: Rapier, Width (CMs): 290, Speed (RPM): 360
UNIT B
15x Sulzer Dobby looms 18 shafts
Model: G6300, Type: Rapier, Width (CMs): 360, Speed (RPM): 360
5x Sulzer Dobby looms 18 shafts
Model: G6300, Type: Rapier, Width (CMs): 290, Speed (RPM): 400
10x Sulzer Dobby looms 18 shafts
Model: G6300, Type: Rapier, Width (CMs): 240, Speed (RPM): 500
UNIT C
1x Benninger Direct Warping
Model: Bendirect, Width (CMs): 180, Speed (RPM): 1200
1x Benninger Sectional Warping
Model: Bentronic, Width (CMs): 200, Speed (RPM): 500
1x Benninger Sizing
Model: Bensizetec, Width (CMs): 230, Speed (RPM): 70
16x Sulzer Jacquard looms
Model: P7150, Type: Projectile, Width (CMs): 360, Speed (RPM): 360
12x Sulzer Dobby looms 18 shafts
Model: P7150, Type: Projectile, Width (CMs): 360, Speed (RPM): 360
12x SMIT Dobby looms 18 shafts
Model: G6300, Type: Rapier, Width (CMs): 360, Speed (RPM): 360
12x SMIT Dobby looms 18 shafts
Model: G6300, Type: Rapier, Width (CMs): 360, Speed (RPM): 360
3x F K ARNA Italy Laying and cutting
250x JUKI Japan Stitching – JUKI sewing m/c
1x AKAB Sweden Automatic sewing machine
PROCESSING UNIT
1x Osthoff Germany Singeing & de-sizing
Width (CMs): 360, Speed (RPM): 100
1x Benninger Germany Scouring & bleaching
Width (CMs): 340, Speed (RPM): 100
1x Kuster India Mercerising
Width (CMs): 220, Speed (RPM): 45
1x Benninger Germany Mercerising
Width (CMs): 340, Speed (RPM): 75
2x Mazzera Italy Jigger Dyeing
Width (CMs): 320, 800 Kgs
2x Mazzera Italy Jigger Dyeing
Width (CMs): 220, 400 Kgs
2x Mazzera Italy Jigger Dyeing
Width (CMs): 220, 75 Kgs
2x Mazzera Italy Jigger Dyeing
Width (CMs): 320, 800 Kgs
6x Indigenous India Jigger Dyeing, various
1x MCS Italy Soft Flow Dyeing, 50 Kgs
1x MCS Italy Soft Flow Dyeing, 500 Kgs
1x MCS Italy Soft Flow Dyeing, 1000 Kgs
1x India CPB Dyeing
1x Motex India Stenter
7 chamber, Width (CMs): 180, Speed (RPM): 100
1x Monforts Germany Stenter
7 chamber, Width (CMs): 320, Speed (RPM): 100
1x Monforts Germany 0 – 0 Finishing
Width (CMs): 320, Speed (RPM): 60
1x Kuster Germany Calender
Width (CMs): 320, Speed (RPM): 100
AB04/300522/BQ/
Complete Fabric Finishing Line (Osthoff, Benninger, Kuster, Monforts,..)
1x Osthoff/ Germany Singeing And Desizing
Year: 2006
Capacity 125 mtrs / min.
Facilitates: singeing, desizing, and Cold-Pad batch bleaching.
Working width: 50 to 340 cm.
No of Dosing unit: 6
1x Benninger Switzerland Continuous Bleaching Range
Year: 2006
Capacity : 1lakh meter bleaching
Facility : continuous bleaching , washing or desizing
Working width : 50cm to 320cm
1x Benninger Switzerland Mercerising Range
Year: 2006
Capacity : 65,000 meter
Facility : merceriaing 100% caustic soda recovery Working Working width : 100 to 320cm
Type : chain type
1x Calico Kuster Germany Mercerising
Year: 2006
Capacity : 25000 meter
With out chain type
Working width : 45 to 240cm
2x Monforts montex Stenter – Steam heating
Year: 2006
Nos of chamber : 7 chamber each
Total Production : 50,000/ per/machine
Working width -2400mm
1x Andritz Kusters Germany Calendaring
Year: 2006
Woring width : 50 to 320cm
With Mahlo unit
1x Monfort Sanforising
Year: 2006
Working Width 50 to 320cm
With Mahlo unit
6x Mezzera/ Italy Jiggar
Year: 2006
Capacity : 1000kg each
Working width : 240 to 320cm
2x Mezzera/ Italy Jiggar
Year: 2006
Capacity 50mtrs
3x MCS/ Italy Soft Flow Jet Dyeing Machine
Year: 2006
1000kg/ 500kg/50kg
1x Dhall Engineering/India Drying Range
Year: 2007
No of cylinder : 8 nos
Working width : 40 to 240cm
1x E+L/Germany Rope Opener
Year: 2006
Working width: 2000mm
1x Dhall Engineering/India CP Dyeing
Year: 2006
Type: Cold Pad batch
1x Elgi Air Compressor
Year: 2008
7x Yash Textile Machine Inspection Machine
Year: 2008
Working width: 320mm Year: 2006
Model : inspection with mending
Type: Inspection and moulding through tube light only no UV light.
1x E+L/Germany Skew Bow Correction, Year: 2006
2x Mending machine, Manual Type
200x A-Frame
1x One Hydraulic Car, Year:L 2008