AC11/010921/CW/
Ring Spinning Plant 6720 Spindles
3x NSC ERA COMBER, YEAR: 2011, COUNTRY: FRANCE, ERA, HI-COMB, CYLINDER, BRUSH : 160mmX520mm, CAN 700X1000″
3x NSC COMBER, YEAR: 1997, COUNTRY: FRANCE, NSC PB32, VARIO-COMB, NSC PIN : 44mm, CAN 700X1000″
2x NSC COMBER, YEAR: 1999, COUNTRY: FRANCE, NSC PB32, VARIO-COMB, NSC PIN : 44mm, CAN 700X1000″
1x SANT ANDREA MIXER, YEAR: 1998, COUNTRY: ITALY, SANT 2MD, SCREW GILL, 2 HEAD X 1HEAD (1C X 1S), CAN 700X1000, CLG : 53X40X1″
1x SANT ANDREA GILL, YEAR: 1993, COUNTRY: ITALY, SANT 2ND, SCREW GILL, 1C X 1S, CAN (700X1000)”
1x SANT ANDREA GILL, YEAR: 1998, COUNTRY: ITALY, SANT SN, SCREW GILL, CAN 700X1000, 1C X 2S”
1x SANT ANDREA GILL, YEAR: 1998, COUNTRY: ITALY, SANT SN, SCREW GILL, CAN 700X1000, 1C X 1S”
1x SANT ANDREA GILL (A/L), YEAR: 1996, COUNTRY: ITALY, SCREW GILL, BALL TYPE VSN WITH, AUTOLEVELLER, GUIDERING : L=22, (R/O)”
1x SANT ANDREA GILL (A/L), YEAR: 1998, COUNTRY: ITALY, SANT VSN, SCREW GILL, 1C X 1S (700X1000), CLEANER : L=22, (R/O)”
1x SANT ANDREA GILL (A/L), YEAR: 1997, COUNTRY: ITALY, SANT VSN, SCREW GILL, 1C X 1S (700X1000), CLEANER : L=22, (R/O)”
1x SANT ANDREA GILL (H/G), YEAR: 1998, COUNTRY: ITALY, SANT SN, SCREW GILL, 1C X 2S (700X1000)”
1x SANT ANDREA GILL (BI-COILER), YEAR: 1997, COUNTRY: ITALY, SANT SH24, 2C X 4S (700X1000), CONTROL PLATE : 50X40X1″
1x SANT ANDREA GILL (REDUCER), YEAR: 1990, COUNTRY: ITALY, SANT SHS24 , REDUCER, 2C X 4S (700X1000), HERISSON 27 PIN/CM, CONTROL PLATE : 27#”
1x SANT ANDREA GILL (REDUCER), YEAR: 1993, COUNTRY: ITALY, SANT SHS24, REDUCER, 2C X 4S (700X1000), HERISSON 27 PIN/CM, CONTROL PLATE : 27#”
1x SANT ANDREA BOBINNER, YEAR: 1998, COUNTRY: ITALY, SANT RF2A 16
1x SANT ANDREA BOBINNER, YEAR: 1997, COUNTRY: ITALY, SANT RF2A 16
5x COGNETEX IDEA, YEAR: 1998, COUNTRY: ITALY, Spindle : 480, Spindle gauge :75mm, Spinining ring : Ø 48mm, Speed : 0 – 16000 RPM”
5x COGNETEX IDEA, YEAR: 1997, COUNTRY: ITALY, Spindle : 480, Spindle gauge :75mm, Spinining ring : Ø 48mm, Speed : 0 – 16000 RPM”
2x COGNETEX FTC, YEAR: 1992, COUNTRY: ITALY, Spindle : 480, Spindle gauge :75mm, Spinining ring : Ø 48mm, Speed : 0 – 12000 RPM, with Siro fil device”
2x COGNETEX FTC, YEAR: 1993, COUNTRY: ITALY, Spindle : 480, Spindle gauge :75mm, Spinining ring : Ø 48mm, Speed : 0 – 12000 RPM, with Siro fil device”
2x SCHLAFHORST AUTO-WINDER, YEAR: 2008, COUNTRY: GERMANY, Spindle : 50, Speed : 250-2000, Yarnmaster : Zenit +”
1x KOREA TECHNOLOGY DOUBLE, YEAR: 1994, COUNTRY: KOREA, Spindle : 65, Drum : 50 Ø, Travevre : 153mm, Yarn speed : 100 – 900″
1x LEE-WHA DOUBLE, YEAR: 1999, COUNTRY: KOREA, Spindle : 24, Drum : 50 Ø, Travevre : 153mm, Wit Lycra device, Yarn speed : 200 – 800″
5x MURATA DT-363-2, YEAR: 1993, COUNTRY: JAPAN, Spindle : 120, Drum “” 100 Ø mm, Cone : 3°30(18mmx176mmxØ45.5mm), Speed : 0 – 12000 RPM, Traverse :153mm”
2x MURATA DT-363-2, YEAR: 1993, COUNTRY: JAPAN, Spindle : 120, Drum “” 100 Ø mm, Cone : 3°30(Ø18mmx176mmxØ45.5mm), Speed : 0 – 12000 RPM, Traverse :153mm, With Bico winding device”
7x MURATA DT-363, YEAR: 1988, COUNTRY: JAPAN, Spindle : 120, Drum “” 100 Ø mm, Cone : 3°30(18mmx176mmxØ45.5mm), Speed : 0 – 12000 RPM, Traverse :153mm”
AC11/010921/CW/
Ring Spinning Plant 8704 Spindles
1x SANT ANDREA COMBER, YEAR: 1994, COUNTRY: ITALY, SANT P90, VARIO-COMB, CAN 700X1000″
3x SANT ANDREA COMBER, YEAR: 1997, COUNTRY: ITALY, SANT P90, VARIO-COMB, CAN 700X1000″
4x SANT ANDREA COMBER, YEAR: 1996, COUNTRY: ITALY, SANT P90, VARIO-COMB, CAN 700X1000″
2x SANT ANDREA COMBER, YEAR: 1993, COUNTRY: ITALY, SANT P90, HI-COMB, CAN 700X1000″
1x NSC COMBER, YEAR: 1991, COUNTRY: FRANCE, NSC PB30, VARIO-COMB, CAN 600X 1000″
2x NSC COMBER, YEAR: 1991, COUNTRY: FRANCE, NSC PB30, HI-COMB, CAN 600X1000″
1x NSC MIXER, YEAR: 1994, COUNTRY: FRANCE, NSC GN6 SCREW GILL, 2HEAD X 1HEAD (1C X 1S), ET13 ET-M (1HEAD), RUBBER TUBE, CAN 700X1000″
1x NSC GILL, YEAR: 1987, COUNTRY: FRANCE, NSC GN6 , SCREW GILL, 1C X 1S (700X1000), SCREW GILL
1x NSC GILL, YEAR: 1994, COUNTRY: FRANCE, NSC GN6 , SCREW GILL, 1C X 1S (700X1000), SCREW GILL
1x NSC GILL, YEAR: 1994, COUNTRY: FRANCE, NSC GN6 , SCREW GILL, 2C X 2S (700X1000), SCREW GILL
1x NSC MIXER, YEAR: 1992, COUNTRY: FRANCE, NSC GN6 SCREW GILL, 2HEAD X 1HEAD (1C X 1S), ET13 ET-M (1HEAD), RUBBER TUBE, CAN 700X1000″
1x NSC GILL, YEAR: 1992, COUNTRY: FRANCE, NSC GN6 , SCREW GILL, 1C X 1S (600X1000)”
1x NSC GILL, YEAR: 1987, COUNTRY: FRANCE, NSC GN6 , SCREW GILL, 1C X 1S (700X1000)”
1x NSC GILL, YEAR: 1994, COUNTRY: FRANCE, NSC GN6 , SCREW GILL, 2C X 2S (600X1000)”
1x NSC GILL, YEAR: 1997, COUNTRY: FRANCE, NSC GN6 , SCREW GILL, 1C X 1S (700X1000)”
1x SANT ANDREA GILL, YEAR: 1989, COUNTRY: ITALY, SCREW GILL, BALL TYPE CSN WITH, AUTOLEVELLER, (R/O)”
1x NSC GILL(A/L), YEAR: 1988, COUNTRY: FRANCE, NSC GC12 , CHAIN GILL, 1C X 1S (700X1200)”
1x NSC GILL, YEAR: 1988, COUNTRY: FRANCE, NSC GC12 , CHAIN GILL, 2C X 2S (700X1200)”
1x SANT ANDREA GILL, YEAR: 1990, COUNTRY: ITALY, SANT SHS24 , REDUCER, 2C X 4S (700X1000), HERISSON 27 PIN/CM, CONTROL PLATE : 27#”
1x SANT ANDREA GILL, YEAR: 1990, COUNTRY: ITALY, SANT SHS24 , REDUCER, 2C X 4S (700X1000), HERISSON 27 PIN/CM, CONTROL PLATE : 27#”
1x NSC GILL (A/L), YEAR: 1994, COUNTRY: FRANCE, NSC GN6 ,SCREW GILL, 1C X 1S (700X1000)”
1x SANT ANDREA GILL (A/L), YEAR: 1991, COUNTRY: ITALY, SANT CSN , CHAIN GILL, 1C X 1S (700X1000)”
1x SANT ANDREA GILL, YEAR: 1995, COUNTRY: ITALY, SANT CSN , CHAIN GILL, 1C X 2S (700X1000)”
1x SANT ANDREA GILL, YEAR: 1995, COUNTRY: ITALY, SANT SH24 , 2C X 4S (700X1000), CONTROL PLATE : 50X40X1″
1x SANT ANDREA GILL, YEAR: 1991, COUNTRY: ITALY, SANT SHS24 , REDUCER, 2C X 4S (700X1000), HERISSON 27 PIN/CM, CONTROL PLATE : 27#”
1x SAVIO BOBINNER FRC-300″, YEAR: 1989, COUNTRY: ITALY, SAVIO FRC-300 ,22drum
1x SAVIO BOBINNER FRC-300″, YEAR: 1990, COUNTRY: ITALY, SAVIO FRC-300 ,22drum
3x COGNETEX FTC, YEAR: 1989, COUNTRY: ITALY, Spindle : 512, Spindle gauge :75mm, Spinining ring : Ø 51mm, Speed : 0 ~ 12000 RPM, with Lycra device”
1x COGNETEX FTC, YEAR: 1989, COUNTRY: ITALY, Spindle : 480, Spindle gauge :75mm, Spinining ring : Ø 51mm, Speed : 0 ~ 12000 RPM, with Siro device”
2x COGNETEX FTC, YEAR: 1987, COUNTRY: ITALY, Spindle : 416, Spindle gauge :75mm, Spinining ring : Ø 51mm, Speed : 0 ~ 12000 RPM, with Siro device”
4x ZINSER, YEAR: 1989, COUNTRY: ITALY, Spindle : 600, Spindle gauge :75mm, Spinining ring : Ø 50mm, Speed : 0 ~ 12000 RPM”
2x COGNETEX FTC, YEAR: 1991, COUNTRY: ITALY, Spindle : 576, Spindle gauge :82.5mm, Spinining ring : Ø 55mm, Speed : 0 ~ 12000 RPM, with Siro device”
4x COGNETEX FTC, YEAR: 1992, COUNTRY: ITALY, Spindle : 576, Spindle gauge :82.5mm, Spinining ring : Ø 55mm, Speed : 0 ~ 12000 RPM, with Siro device”
1x SCHCAFHORST AUTO-WINDER, YEAR: 2005, COUNTRY: GERMANY, Spindle : 50, Speed : 250 ~ 2000, Yarnmaster : Zenit +”
1x SCHCAFHORST AUTO-WINDER, YEAR: 2007, COUNTRY: GERMANY, Spindle : 50, Speed : 250 ~ 2000, Yarnmaster : Zenit”
1x SCHCAFHORST AUTO-WINDER, YEAR: 2008, COUNTRY: GERMANY, Spindle : 50, Speed : 250 ~ 2000, Yarnmaster : Zenit +”
1x LEE-WHA DOUBLE, YEAR: 1999, COUNTRY: KOREA, Spindle : 48, Drum : 50 Ø, Travevre : 153mm, Yarn speed : 200 ~ 800″
1x KAMITSU DOUBLE, YEAR: 1999, COUNTRY: JAPAN, Spindle : 36, Drum : 50 Ø, Travevre : 153mm, with Lycra device, Yarn speed : 200 ~ 800″
1x HW DOUBLE, YEAR: 2018, COUNTRY: CHINA, Spindle : 72, Drum : 82 Ø, Yarn speed : 300~1200″
3x MURATA DT-363, YEAR: 1988, COUNTRY: JAPAN, Spindle : 120, Drum “” 100 Ø mm, Cone : 3°30(18mmx176mmxØ45.5mm), Speed : 0 ~ 12000 RPM, Traverse :153mm, with Bico winding device”
2x MURATA DT-363, YEAR: 1994, COUNTRY: JAPAN, Spindle : 128, Drum “” 100 Ø mm, Cone : 3°30(18mmx176mmxØ45.5mm), Speed : 0 ~ 12000 RPM, Traverse :153mm”
3x MURATA DT-363, YEAR: 1994, COUNTRY: JAPAN, Spindle : 128, Drum “” 100 Ø mm, Cone : 3°30(18mmx176mmxØ45.5mm), Speed : 4000 ~ 12000 RPM, Traverse :153mm”
1x MURATA DT-363-2, YEAR: 1993, COUNTRY: JAPAN, Spindle : 128, Drum “” 100 Ø mm, Cone : 3°30(18mmx176mmxØ45.5mm), Speed : 4000 ~ 12000 RPM, Traverse :153mm”
8x MURATA DT-363, YEAR: 1988, COUNTRY: JAPAN, Spindle : 132, Drum “” 100 Ø mm, Cone : 3°30(18mmx176mmxØ45.5mm), Speed : 4000 ~ 12000 RPM, Traverse :153mm”
5x MURATA DT-363, YEAR: 1988, COUNTRY: JAPAN, Spindle : 120, Drum “” 100 Ø mm, Cone : 3°30(18mmx176mmxØ45.5mm), Speed : 0 ~ 12000 RPM, Traverse :153mm”
1x MURATA DT-363-2, YEAR: 1993, COUNTRY: JAPAN, Spindle : 120, Drum “” 100 Ø mm, Cone : 3°30(18mmx176mmxØ45.5mm), Speed : 0 ~ 12000 RPM, Traverse :153mm”
1x CORCHI SOFT W/D, YEAR: 1998, COUNTRY: ITALY, Spindle : 36, Speed : 1~1500, Basic traverse: 153mm”
1x KAMITSU SOFT W/D, YEAR: 1991, COUNTRY: JAPAN, Spindle : 36, Speed : 200~800, Basic traverse: 145mm”
1x FADIS SOFT W/D, YEAR: 2005, COUNTRY: ITALY, Spindle : 32, Speed : 0~800, Basic traverse: 120mm ~ 160mm”
1x CORCHI SOFT W/D, YEAR: 2020, COUNTRY: CHINA, Spindle : 40, Speed : 1 ~ 1500, Basic traverse: 1.0mm ~ 300.0mm, Packaqe diameter : 1.0mm ~ 280.0mm”
1x TANGSHI RE WINDER, YEAR: 2015, COUNTRY: CHINA, Spindle : 24, Speed : 300 ~ 1200, Yarn : sensors”
1x TANGSHI RE WINDER, YEAR: 2019, COUNTRY: CHINA, Spindle : 48, Speed : 300 ~ 1200, Yarn : sensors”
AA05/200721E/LPL-LI/F/AQ/
Worsted Spinning Plant
1 breaker Seydel mod. 870 – year 1991 – refrigerator and boiler with steamer included – can delivery 1000×1200
1 Integrated S. Andrea mod. RSN / MC, year 1990, bivalent with coils and bumps, inverter, 32 cans and coil rack, can delivery 1000×1200
1 Sant’Andrea mod RSN/ MC – year 1989 – delivery 1 sliver in 1 can 800×1000
1 Gill Sant’Andrea mod. CSN-ARM – year 1989 – delivery 1 sliver in 1 can 800×1000, head at chain with combs – automatic change
1 Gill Sant’Andrea mod. SH22 + Uster – year 1988 – head at disks – feeding by cans 6×2 couplings - delivery 2 slivers in 2 cans 800×1200 – automatic change
n.1 Gill Sant’Andrea mod. SH22 + Uster – year 1988 – head at disks – feeding by cans 12×2 couplings – delivery 4 slivers in 2 cans 800×1200 – automatic change
1 Finisher Sant’Andrea mod. RF2B – year 1989 – 24 bobbins – automatic doffer
1 Seydel mod. 870 – year 1989 – refrigerator and boiler with steamer included – can delivery 1000×1200
1 Integrated S. Andrea mod. RSN / MC, year 1990, bivalent with coils and bumps, inverter, 32 cans and coil rack .nr 32. output 100x 1200 vases. Year 1990
1 Sant’Andrea mod RSN/ MC – year 1991- delivery 1 sliver in 1 can 800×1000
1 Gill Sant’Andrea mod. CSN-ARM – year 1990 – delivery 1 sliver in 1 can 800×1000, head at chain with combs – automatic change
1 Gill Sant’Andrea mod. SH22 + Uster– year 1990 – head at disks – feeding by cans 6×2 couplings – delivery 2 slivers in 2 cans 800×1200 mm. – automatic change
1 Gill Sant’Andrea mod. SH22 + Uster – year 1990 – head at disks – feeding by cans 12×2 couplings – delivery 4 slivers in 2 cans 800×1200 mm. – automatic change
1 Finisher Sant’Andrea mod. RF2B – year 1991 – 24 bobbins – automatic doffer
8 Spinning frames Cognetex mod. FTC8/L – year 1989/90 – 5 x 800 spindles each – year 1989/1990 - and 3 x 640 spindles each –
gauge 82,5 mm. – ring diam. 55 mm – arm SFK PK1601 – automatic doffer – tube 260 mm
Automatic winders Savio mod. Espero – 28 positions each –- delivery 6” conicity 4°20’ and 5°57’ – optical clearers Uster– Mesdan splicer 594 –
auto doffing 1 trolley – cone reserve in headstock – lighting – package conveyor belt – Electrojet travelling blower
- Uster Tester 3 laboratory complete with all the analysis accessories (top tester for tape analisis, electronic torque meter, planofil tablet, aspino, etc.)
All plant working 380V/50Hz
AA05/090721/AT/
Complete Worsted Spinning Line 5000 Spindles
1 x Cognetex breaker mod. MSC.6, year 2003, with Corema chiller, delivery 1 sliver in 1 can dia. 1000 x 1150 mm.
1 x Cognetex rebreaker mod. SMC.600, year 2003, delivery 1 sliver in 1 can dia. 800 x 1200 mm.
1 x Cognetex first passage gill mod. SCE.600, year 2003, electronic autoleveller, delivery 1 sliver in 1 can dia. 800 x 1200 mm.
1 x Cognetex second passage first gill mod. SC.600, year 2003, delivery 2 slivers in 2 cans dia. 800 x 1200 mm.
1 x Cognetex horizontal finisher mod. FRC.300, year 2003, 22 heads, tubes 300 mm.
3 x Cognetex spinning frames mod. Idea, year 2/2003 + 1/2005, 960 spindles each, 960 spindles each, ring dia. 55 mm., gauge 82,5 mm., tube 280 mm., SKF pneumatic draft mod. PK.6000, automatic doffing, Magitex blower
linked to
3 x Savio winders mod. Orion.1, year 2/2003 + 1/2005, delivery 6″, conicity 4°20′, Electrojet blower
1 x Cognetex spinning frames mod. Idea, year 2006, 1056 spindles, ring dia. 51 mm., gauge 75 mm., tube 260 mm., SKF pneumatic draft mod. PK.6000, automatic doffing, Magitex blower,
linked to
1 x Savio winder mod. Orion.l, year 2006, delivery 6″, conicity 4°20′, Electrojet blower
1 x Cognetex spinning frames mod. Idea, year 2008, 1056 spindles, ring dia. 51 mm., gauge 75 mm., tube 260 mm., SKF pneumatic draft mod. PK.6000, automatic doffing, Magitex blower,
linked to 1 x Savio winder mod. Polar], year 2008, delivery 6″, conicity 4’20’, Electrojet blower
1 x Savio 2×1 twisting machine mod. Geminis, year 2003, 360 spindles, feeding 2 x 6′, pneumatic threading, pot dia. 165 mm. x 125 mm., delivery 6″, conicity 4°20′, Electrojet blower
1 x Savio 2×1 twisting machine mod. Sirius.25413, year 2012, 256 spindles, feeding 2 x 6″, pneumatic threading, pot dia. 165 mm. x 125 mm., delivery 6″, conicity 4°20′, Electrojet blower
1 x Savio high bulk machine mod. Espero, year 2004, 30 heads, automatic doffing, waxers, delivery 6′, conicity 4°20′, Magitex blower
1 x Savio high bulk machine mod. Espero, year 2006, 21 heads, automatic doffing, waxers, delivery 6`, conicity 4°20′, Magitex blower
AA05/030721/DI/
Worsted Spinning Line
AA05/190521D/OO-O/F/DI/
Seydel 850 Breaker
Year: 1994
AA05/190521D/PO-O/F/DI/
NSC Rebreaker
1x R5/L 10, Year: 1994
1x GC 14, Year: 1994
AA05/190521/DI/
Passage
1x NSC GC15, Year: 2005, 1000x1100
1x Cognetex SC.E 11VA, Year: 1995, 1000x1100
1x Cognetex SC 420/22V, Year: 1995, 800x1100
AA05/190521D/RT-T/F/DI/
Cognetex Finisher
Year: 1994, Type: FRC 300-16/S, 16 bobbins
Cognetex Ring Spinning
AA05/190521D/CS-R/F/DI/
Cognetex Ring Spinning FTC-9
1x Year: 1993, Type: FTC-9, 384 head, ring dia. 70 mm., gauge 90 mm., tube height 300 mm.
AA05/190521D/RA-R/F/DI/
Cognetex Ring Spinning FTC-9
1x Year: 1995, Type: FTC-9, 408 head, ring dia. 70 mm., gauge 90 mm., tube height 300 mm.
AA05/190521D/RC-R/F/DI/
Cognetex Ring Spinning FTC-9
1x Year: 1996, Type: FTC-9, 408 head, ring dia. 70 mm., gauge 90 mm., tube height 300 mm.
AA05/190521D/RR-R/F/DI/
Cognetex Ring Spinning FTC-9
1x Year: 1997, Type: FTC-9, 408 head, ring dia. 70 mm., gauge 90 mm., tube height 300 mm.
AA05/190521D/RR-R/F/DI/
Cognetex Ring Spinning FTC-9
1x Year: 1997, Type: FTC-9, 408 head, ring dia. 70 mm., gauge 90 mm., tube height 300 mm.
AA05/190521D/YC-Y/F/DI/
Cognetex Ring Spinning IDEA 73
1x Year: 2000, Type: IDEA 73, 480 head, ring dia. 51 mm., gauge 75 mm., tube height 260 mm.
AA05/190521D/YC-Y/F/DI/
Cognetex Ring Spinning IDEA 73
1x Year: 2001, Type: IDEA 73, 480 head, ring dia. 51 mm., gauge 75 mm., tube height 260 mm.
AA05/190521/DI/
2x Magitex, Year: 1995-1996
Reeling
AA05/190521D/AT-L/F/DI/
Croon & Lucke
1x , Year: 1993, Type: HB 500, 32 positions
AA05/190521D/YS-AA/F/DI/
Rite
1x , Year: 2013, Type: MACH 4, 36 positions
AA05/190521D/CA-L/F/DI/
Croon & Lucke
1x , Year: 1996, Type: HB 500, 32 positions
AA05/190521/DI/
Armstrong Machine
1x Year: 1999
Obem Hank Dyeing Machines
AA05/190521D/YY-L/F/DI/
Obem Hank Dyeing Machines
1x Year: 1993, Type: VC.5333/93, 384 Kgs.
AA05/190521D/LY-L/F/DI/
Obem Hank Dyeing Machines
1x Year: 2001, Type: MBC 350/08/72, 384 Kgs.
AA05/190521D/RY-L/F/DI/
Obem Hank Dyeing Machines
1x Year: 1995, Type: MBC 175/06/CE, 175 Kgs.
ATYC Centrifuges
AA05/190521D/AS-L/F/DI/
ATYC Centrifuges
1x Year: 1996, Type: HIC-1500, 150 Kgs, 1500 mm.
AA05/190521D/CR-O/F/DI/
ATYC Centrifuges
1x Year: 2001, Type: HIC-1500, 150 Kgs, 1500 mm.
AA05/190521D/YS-Y/F/DI/
Stalam Dryer
1x Year: 2012, RF 40 KW
Winders
AA05/190521D/CO-O/F/DI/
Fadis Winders
Year: 1994, Type: TUAN - E 500, Hank to Cone, 150 to 200mm, 25 Sp, 10 Incomplete Sp.
AA05/190521D/CO-O/F/DI/
Fadis Winders
Year: 1997, Type: TUAN - E 500, Hank to Cone, 150 to 200mm, 25 Sp.
AA05/190521D/RA-O/F/DI/
Rite Winders
Year: 2000, Type: HTC T7P
AA05/190521D/RA-O/F/DI/
Rite Winders
Year: 2002, Type: HTC T7P
AC29/080621E/ALLI-ALI/M/AS
Worsted Spinning Line
Seydel 871 Tow Strech Breaker
Year: 2003, CAN SIZE 1000 x 1200 AUTOMATIC DOFFING
Seydel 711 Re-Breaker
Year: 2003, CAN SIZE 1000 x 1200 ROTATING CAN CHANGER, 24 FEEDS
Passage NO.1: SANT ANDREA NOVARA ST 21
Year: 2003, CAN SIZE 1000 x 1200 AUTO DOFFER, 1 SLIVER 1 CAN DELIVERY, REGULATOR, 12 FEEDS
Passage NO.2: SANT ANDREA NOVARA ST 21
Year: 2003, CAN SIZE 800 x 1200, 2 SLIVER 2 CAN DELIVERY , AUTO DOFFER, REGULATOR, 10 FEEDS
Passage NO.3: SANT ANDREA NOVARA ST 21
Year: 2003, CAN SIZE 800 x 1200, 4 SLIVER 2 CAN DELIVERY, AUTO DOFFING, 24 FEEDS
Finisher SANT ANDREA NOVARA RF5
Year: 2005, 24FEEDS AUTO DOFFING, 50mm x 330mm TUBE SPEC
4x ZINSER 451 RING FRAMES
Year: 2014, 1116 spindle ring dia. 57 gauge 82,5 draft system PK6000 autodoffing, with blower
Autoconer SAVIO ORION E
Year: 2004, 60 head 6 inc 4’20”, loephe tk 940 mesdan 590 L one cone changer with blower
Autoconer SAVIO ORION E
Year: 2002, 60 head 6 inc 4’20” loephe tk 840 mesdan 590 L one cone changer with blower
4x SAVIO GEMINIS 204B TWISTING
3 × 2004 = 216 spindles feeding 2×6 inch
1 × 2004 : 240 spindles feeding 2×6 inch
delivery 6inch pot dia 170 mm with blower
AC29/060621/AS/
Complete High Quality Worsted Spinning Line
Seydel 871 Breaker
Quantity: 1, Year: 2002
NSC R5L Breaker
Quantity: 1, Year: 2002
NSC GC15
Quantity:3, Year: 2002
NSC FMV42 Finisher
Quantity:2, Year: 2002
Zinser RM450 BLZK Ring Spinning
Quantity: 5, Year: 2001
3×57(1008 spindles)
1×55(1044 spindles)
1×55(1116 spindles)
Savio Orion E Autoconer
Quantity:3, Year: 2×2001,1×2002, 60 spindles
Simet Assembly Winder
Quantity:2, Year: 2006
Savio Geminis Twisting
Quantity: 10, 60 Spindles
2x Year: 2001, 202B
2x Year: 2004, 243C
4x Year: 1998, 202B
2x Year: 2001, 244C
Superba Heatset
Year: 2, Year: 2006, 48 spindles
AE23/270521E/LLI/M/
Spinning Line
2x ZINSER ROVING FRAME FL670, YEAR: 2005, 120 SPINDLES
3x ZINSER RING SPINNING RM 351, YEAR: 2005, 1116 SPINDLES
1x ZINSER RING SPINNING RM 351, YEAR: 2005, 1116 SPINDLES (LYCRA PINTER TO THE SYSTEM)
4x SCHLAFHORST AUOCONER 338 V /26 SPINDLES, YEAR: 2005
1x ELECTROJET CONVEYOR CHAIN SPOOL AND CLEANER, YEAR: 2005
1x ELECTROJET REMOVAL INSTALLATION WITH 2 CLEANERS, YEAR: 2005
2x ELECTROJET REMOVAL INSTALLATION WITH 2 CLEANERS, YEAR: 2005
1x ZWEIGLE SPINNING LABO SEMI-AUTOMATIC TENSIOMETER, YEAR: 2006
1x ZWEIGLE SPLICE RESISTANCE MEASUREMENT DEVICE, YEAR: 2006
1x TESTER4 SE USTER, , YEAR: 2003
1x ELECTROJET ROLLER CLEANER, YEAR: 2006
1x GRAF LARGE DRUM DIGGING WHEEL, YEAR: 2008
8x RIETER COMBER
AC29/100521/AS/
Acrylic Plant
AC29/100521D/ACL-AL/M/AS/
SEYDEL870 + COGNETEX REBREAKER
SEYDEL BREAKER 870
QUANTITY:2
1X YEAR:1996, (CAN 110*120), 7500 KG/DAY
1X YEAR:1993, (CAN 70*120), 7500 KG/DAY
COGNETEKS REBREAKER SMC 400
1X YEAR: 1990, TOPS, 5000 KG/DAY, 24 BANT IN- 1 TOPS OUT
1X YEAR: 1996, TOPS, 5000 KG/DAY, 24 BANT IN- 1 TOPS OUT
1X YEAR: 1992, CAN (70*100), 5000 KG/DAY, 24 BANT IN 1 BANT. OUT
1X YEAR: 1994, CAN (90*100), 5000 KG/DAY, 24 BANT IN 1 BANT. OUT
(Price for set)
AC29/100521D/AY-Y/M/AS/
NSC RUBBING FRAME FM6-A
QUANTITY: 2, YEAR: 1989, 500 KG/DAY, 16 HEAD
AC29/100521D/LS-S/M/AS/
RUBBING FRAME FM.30
QUANTITY: 1, YEAR: 1993, 24 HEAD, 6500 KG/DAY
AC29/100521D/RS-Y/M/AS/
ZINSER RING SPINNING 421.E
QUANTITY: 6, YEAR: 1997, SPINDLES: 1088 , RING dia. 51
AC29/100521D/AS-Y/M/AS/
ZINSER RING SPINNING 418
QUANTITY: 1, YEAR: 1990, SPINDLES: 964 , RING dia. 55
AC29/100521D/AS-Y/M/AS/
SAVIO AUTOWINDER (MAGAZIN)
QUANTITY: 5, YEAR: 1998, SPINDLES: 60
1X QUANTUM USTER, 2X MKC 20 USTER, 2X LOPFE
AC29/100521D/S-Y/M/AS/
ASSEMBLY WINDER OMP.BEILLA
QUANTITY: 1, YEAR: 1991, SPINDLES: 30, 8 INCH, 3 PLY
AC29/100521D/S-Y/M/AS/
ASSEMBLY WINDER SAVIO
QUANTITY: 1, MODEL, SPINDLES: 30, 6 INCH, 3 PLY
AC29/100521D/AA-Y/M/AS/
ASSEMBLY WINDER OMP.BEILLA
QUANTITY: 1, MODEL, SPINDLES: 42, 8 INCH, 3 PLY
AC29/100521D/AA-Y/M/AS/
ASSEMBLY WINDER OMP.BEILLA
QUANTITY: 1, MODEL, SPINDLES: 42, 8 INCH, 3 PLY
AC29/100521D/AY-Y/M/AS/
ASSEMBLY WINDER AGR
QUANTITY: 1, YEAR: 1998, SPINDLES: 60, 6 INCH, 3 PLY
AC29/100521D/AY-Y/M/AS/
ASSEMBLY WINDER OMP.BEILLA
QUANTITY: 1, YEAR: 1991, SPINDLES: 66, 8 INCH, 3 PLY
AC29/100521D/CL-L/M/AS/
TWISTER VOLKMANN VTS 07
QUANTITY: 9, YEAR: 1997, SPINDLES: 208, 6 INCH
AC29/100521D/YR-P/M/AS/
SAVIO VOLUFIL HIGH BULKING RRS
QUANTITY: 3, YEAR: 2X1991 - 1X1993, SPINDLES: 36, 8 INCH
AC29/100521D/AAL-AL/M/AS/
SAVIO VOLUFIL HIGH BULKING ESPERO
QUANTITY: 2, YEAR: 1998, SPINDLES: 45, 8 INCH
AG09/040521/
7,072 SPINNING COMPLETE PLANT LIST
AC32/040521/BC/
SANTANDREA RF-2A BOBBINER
QUANTITY: 1, YEAR: 1990, 20DRUM, 1 BOBBIN
AC32/040521D/SC-Y/C/BC/
SCHLAFHORST WINDER AUTO CONER
QUANTITY: 1, YEAR: 2006-03-28 , 50 DRUM AC338, 23445L X 2068W X 2790H 36KW/H , MAGAZINE TYPE S, WAXING DEVICE 20D , THERMO SPLICER , KNOTTER 20D , 40'20/BIKO BOTH
AC32/040521D/SC-Y/C/BC/
SCHLAFHORST WINDER AUTO CONER
QUANTITY: 1, YEAR: 2007-07-24 , 50 DRUM , AC338 23445L X 2068W X 2790H 36KW/H, MAGAZINE TYPE , THERMO SPLICER 40'20/BIKO BOTH
AC32/040521D/RT-C/C/BC/
STEAMER/AUTOCLAVE
QUANTITY: 1, YEAR: 1997-09-30 , WELKER GMBH , 3600LX 12300W X 2500H, CAPA 1000KG, 25KW/H
NOTE: Machines come with many spare parts.
AE96/250321/AQ/
Sant Andrea Worsted Line
Composed of:
1x Gill box mod.ST21 ARE , year: 2002, electronic autoleveller, cans creel, delivery 1 can 1000×1200 mm., 1 sliver.
1x Gill box mod.HC22 ARE, year: 2001, autoleveller, cans creel, delivery 2 cans 800×1200 mm., 1 sliver each can.
1x Gill box mod.HC22 year: 2001, cans creel, delivery 2 cans 800×1200 mm., 1 sliver each can.
1x Finisher mod.RF4B year: 2002, 24 bobbins, tube 330 mm.
Machines are professionally dismantled and stored in warehouse
Machine are in excellent condition
Complete with all catalogues/manuals.
AE96/250321E/LL-AI/F/AQ/
Rebreaker RST21
Quantity: 1, Year: 2003, delivery one can 1000x1200 feeding creel for bobbins and cans.
AE96/250321E/ACI-CI/F/AQ/
3 passage (ST21+HC22+HC22)
1x Gill box mod.ST21 ARE , year: 2002, electronic autoleveller, cans creel, delivery 1 can 1000x1200 mm., 1 sliver.
1x Gill box mod.HC22 ARE, year: 2001, autoleveller, cans creel, delivery 2 cans 800x1200 mm., 1 sliver each can.
1x Gill box mod.HC22 year: 2001, cans creel, delivery 2 cans 800x1200 mm., 1 sliver each can.
AE96/250321E/AIL-AI/F/AQ/
1x Finisher mod.RF4B
Year: 2002, 24 bobbins, tube 330 mm.
Machine worked till Sept 2020. Ctrs required for loading, 1x40' and 1x20'.
Machines are professionally dismantled and stored in warehouse
Machine are in excellent condition
Complete with all catalogues/manuals.
AG75/110321D/OYI-TO/F/BA/
Jwell Spandex Yarn Spinning Lines
Year: 2012／2013, 16 extruders, Diameter 45 mm, 96 winders, 12 ends, Total 96 positions, Capacity is 4000kg／24 hs based on 20d yarn, Now stopped, Good condition.
AF30/050321/BM/
Complete Worsted Spinning Line
AF30/050321E/PI-AI/M/BM/
Cognetex Breaker MSC6
Quantity: 1, Year: 2002, 6 Rollers, 280 mm Diam.450 mm width, Cans 1200 x 1000 mm, 1 Chiller for 2 m/cs, Speed 235 m/min, 98 Ktex / 3,3 Dtex, 29-30 gr/m
AF30/050321E/AII-AI/M/BM/
Cognetex Breaker MSC6
Quantity: 1, Year:2004, 6 Rollers, 280 mm Diam.450 mm width, Cans 1200 x 1000 mm, 1 Chiller for 2 m/cs, Speed 235 m/min, 98 Ktex / 3,3 Dtex, 29-30 gr/m
AF30/050321E/AYI-AL/M/BM/
Preparation LOT
Re-breaker SMC 600/11V, year: 2002, 14 Cans,1200x1000 mm Delivery :1 can 1200x1000 mm
reabreker smc 600 hydrolic rollers: Tessil Gomma Italy
1st passage SCE 600/11VA, year: 2002, 8 Cans 1200x1000 mm Delivery :1 can 1200x1000 mm
2nd passage SC 600/22V, year: 2002, 5+5 Cans 1200x1000 mm Delivery : 2 cans 1200x800 mm
3rd passage SC 600/22V, year: 2002,
6+6 Cans 1200x800 mm Delivery: 2 Cans 1200x800 mm
Finisher FRC 300/24S, year: 2002, SPEED; 160 m/min, DIMENSIONS: 5,40 m x 14,20 m
AF30/050321E/AAI-AI/M/BM/
Preparation LOT
Re-breaker 2 SMC 11V, year: 1994, 12/14 Cans 1200x1000 mm Delivery:1 Can 1200x800 mm
1st passage SC 11V, year: 1994, 8 Cans 1200x800 mm Delivery:1 Can 1200x800 mm
2nd passage SCE 11 VA, year: 1994, 8 Cans 1200x800 mm Delivery : 1 Can 1200x800 mm
3rd passage SC 22 V, year: 1994, 5+5 Cans 1200x800 mm Delivery : 2 Cans 1200x800 mm
Finisher FRC 22/S, year: 1994, SPEED: 130 m/min, DIMENSIONS: 5,70 m x 13,30 m
AF30/050321E/PL-AI/M/BM/
Cognetex IDEA 73 L Ring Frame
Quantity: 6 , Year: 2002, Spindles:1056, 51 mm, Gauge 75 mm ,Ring diam 51 mm, SPEED: 10.800 rpm , DIMENSIONS: 1,80 m x 47,20 m
cognitex ring frames drafting system is air pressure
AF30/050321E/PO-O/M/BM/
ZINSER Ring Frames RM451
Quantity: 2, Year: 2005, 1056 spindles, gauge 50 mm, Gauge 75 mm, SPEED: 10.800 rpm, DIMENSIONS: 1,80 m x 47,90 m
zinser ring frames drafting system is air pressure
AF30/050321E/SO-O/M/BM/
ZINSER Ring Frames RM451
Quantity: 2, Year: 2006, 1056 spindles, gauge 50 mm, Gauge 75 mm, SPEED: 10.800 rpm, DIMENSIONS: 1,80 m x 47,90 m
zinser ring frames drafting system is air pressure
AF30/050321E/AIR-P/M/BM/
ZINSER Ring Frames RM451
Quantity: 1, Year: 2007, 1056 spindles, gauge 50 mm, Gauge 75 mm, SPEED: 10.800 rpm, DIMENSIONS: 1,80 m x 47,90 m
AF30/050321E/PI/M/BM/
Savio Winder Orion E
Quantity: 2, Year: 2002, 60 positions, Loepfe clearer, SPEED: 1300 m/min, Cones 4deg.20, DIMENSIONS: 1,80 m x 25,30 m
3 Auto feeding, 4 Basket feeding
AF30/050321E/PL/M/BM/
Savio Winder Orion E
Quantity: 1, Year: 2003, 64 positions, Loepfe clearer, SPEED: 1300 m/min, Cones 4deg.20, DIMENSIONS: 1,80 m x 30 m
3 Auto feeding, 4 Basket feeding
AF30/050321E/OL/M/BM/
Savio Winder Orion L
Quantity: 1, Year: 2004, 64 positions, Loepfe clearer, SPEED: 1300 m/min, Cones 4deg.20, DIMENSIONS: 1,80 m x 30 m
3 Auto feeding, 4 Basket feeding
AF30/050321E/PI/M/BM/
Savio Winder Orion L
Quantity: 2, Year: 2005, 64 positions, Loepfe clearer, SPEED: 1300 m/min, Cones 4deg.20, DIMENSIONS: 1,80 m x 30 m
3 Auto feeding, 4 Basket feeding
AF30/050321E/PL/M/BM/
Savio Winder Orion L
Quantity: 1,Year: 2006, 64 positions, Loepfe clearer, SPEED: 1300 m/min, Cones 4deg.20, DIMENSIONS: 1,80 m x 30 m
3 Auto feeding, 4 Basket feeding
AF30/050321E/AL/M/BM/
Savio Winder ESPERO RS
Quantity: 1, Year: 1990, 60 positions
AF30/050321E/OI/M/BM/
Geminis Twister 204B
Quantity: 3, Year: 2003, 360 spindles, Mesdan Jointair splicers, Cones 4deg.20 , Gearbox lubrication automatıcally done, Gauge 200 mm.
POT SIZE & Some machines: 17,5 cm Diam and 20,5 cm height, & Some machines: 15,7 cm Diam and 15 cm height (should be checked at time of purchase)
AF30/050321E/OL/M/BM/
Geminis Twister 204B
Quantity: 2, Year: 2004, 360 spindles, Mesdan Jointair splicers, Cones 4deg.20, Gearbox lubrication automatıcally done,Gauge 200 mm.
POT SIZE & Some machines: 17,5 cm Diam and 20,5 cm height, & Some machines: 15,7 cm Diam and 15 cm height (should be checked at time of purchase)
AF30/050321E/PI/M/BM/
Geminis Twister 204B
Quantity: 1, Year: 2005, 360 spindles, Mesdan Jointair splicers , Cones 4deg.20 , Gearbox lubrication automatıcally done, Gauge 200 mm.
POT SIZE & Some machines: 17,5 cm Diam and 20,5 cm height, & Some machines: 15,7 cm Diam and 15 cm height (should be checked at time of purchase)
AF30/050321E/CL/M/BM/
Stalam Dryer RF
Quantity: 1, Year: 2002, 40 KW, Air Cooled, cooling system is air
AF30/050321E/AL-L/M/BM/
Savio RRS Volufil
Quantity: 1, Year: 1983, With 45 spindles electrically heated.
Not in production, Standing on factory floor. (Not dismantled)
Complete, nothing major missing but need a good overhaul.
AF30/050321E/CI-L/M/BM/
Savio RRS Volufil
Quantity: 1, Year: 1988, With 45 spindles electrically heated.
Not in production, Standing on factory floor (Not dismantled)
Complete, nothing major missing but need a good overhaul.
AA05/010221E/LS.L-O/F/AS/
Sant Andrea Preparation Line
1st passage mod. DSN+ARM, year 1994, 1 sliver in 1m can dia. 800 x 1000 mm.
2nd pssage mod. SH22.ARE, year 2001, 2 slivers in 2 cans dia. 800 x 1000 mm.
3rd passage mod. SH22.CT (count yarn control), year 2001, 2 slivers in 2 cans dia. 800 x 1000 mm.
AA05/250121E/ASR.L-AL/C/AY/
Semi Worsted Spinning Plant
1 x BONINO card
Year 1987, w.w. 2800 mm., silo feeder, fibers weight device,
Pre-avantrain, roll conveyor, first drum with 2 workers and strippers,
Second drum with 6 workers and strippers, double doffer, rigid clothing like new,
Delivery 2 tapers on after carding gill box LAWER, can dia. 1000 x 1200 mm. with autodoffing
1 x NSC Schlumberger preparation line composed by:
1 x GC.13, year 1988, autoleveller, combs head with chain drive
Feeding creel 10 positions by cans, delivery 1 sliver in 1 can dia. 620 x 1150 mm.
1 x GC.13, year 1988, combs head with chain drive
Feeding creel 10 positions by cans, delivery 2 slivers in 2 cans dia. 620 x 1150 mm.
1 x GN.6, year 1985, combs head with screw drive,
Feeding creel 12 positions by cans, delivery 4 slivers in 2 cans dia. 620 x 1150 mm.
1 x NSC Schlumberger semi-worsted spinning frame
Year: 1985, mod. CF.29, 130 spindles
Feeding by cans, ring diam. 120 mm., tube H. 600 mm., single drive, single frame
Hight draft pendulum arms (composed by 1 feeder top cots roller, 1 middle cots roller,
3x Elastic cots rollers besh with down apron, 1 release top cots roller)
Machine complete in good running condition ;
Stock of spindles plastic tubes included ;
All machines excellent maintained
Plant is still working
AC29/120121/BG/
Complete Worsted Line
SCHLUMBERGER Stretch-Break Converter, TB10 TIPO 331, Year: 1997, With steamer and cooling
SEYDEL Stretch-Break Converter, Type.873, Year: 1997, With steamer and cooling, 1 continuous Sliver relaxer Seydel CSR-6, 1 automatic Sliver Datacher ASD-11, 1 Tow Vibrator TV-2
SCHLUMBERGER Mixer TT Converter, R5A/GC15 TIPO 656RE, Year: 2001, With regular
SCHLUMBERGER Chain Guill, MODELO GC30 Type 1656 RE , Year: 2007, With regular
SCHLUMBERGER Chain Guill , MODELO GC30 Type 1652 , Year: 2007
SCHLUMBERGER Chain Guill , MODELO GC30 Type 1656 , Year: 2007, RE electronic autoleveller, Gearing diagram with electronic servo drives, Optimal textile control at speeds up to 600 m/min.
SCHLUMBERGER Vertical Rubbing Frame, FMV41, Year: 2007,20 spindles,Rubbing speed up to 1,500 strokes/min. automatic doffing, Conic bobbin format
SCHLAFORST Winding Machine , MOD.AUTOCONER 238 TYP, Year: 2001, 30 Winding Heads
SCHLAFORST Winding Machine, MOD.AUTOCONER 238 TYP, Year: 2001, 30 Winding Heads
SCHLAFORST Winding Machine, MOD.AUTOCONER 238 TYP, Year: 21/12/2001, 30 Winding Heads
SCHLAFORTST AUTOCONER Winding Machine , TYPE 5 V/38, Year: 2007, 38 Winding Heads
Winding Machine Autoconer SCHLAFORTST MOD. TYP V-93030, Year: 2002, 30 Winding Heads
SCHLAFHORST Coner Winding Machine, MOD. TYP 338 V/30, Year: 2003, 30 spindles, Interchanger for CTS bobbins, preparing for bobbins and wastes, cleaning for tubes, Loepfe YM800 Spectra purgers, Autotense and parafined, Thermosplicer
3x ZINSER Ring Spinning Machine ,MOD.450, 720 spindles, Year: 1998, Distance between cilinders: 82,5 mm. Diameter of the rings: 56 mm. Length of the tube: 260 mm. CO-WE-MAT 395 V. and external handels.
Conicity 4/20
1x ZINSER Ring Spinning Machine ,MOD.450, 720 spindles, Year: 2002, Distance between cilinders: 82,5 mm. Diameter of the rings: 56 mm. Length of the tube: 260 mm. CO-WE-MAT 395 V. and external handels.
1x ZINSER Ring Spinning Machine ,MOD.450, 720 spindles, Year: 2003, Distance between cilinders: 82,5 mm. Diameter of the rings: 56 mm. Length of the tube: 260 mm. CO-WE-MAT 395 V. and external handels.
1x ZINSER Ring Spinning Machine , MOD.451 , 828 spindles, Year: 2007, Distance between cilinders: 82,5 mm. Cowemat 395 V
1x Signaling system for broken yarn SENSORFIL for BLOCCASTIPPINO for ZINSER 450 (828 spindles), Composed by:- N. 828 SENSORFIL sensors SC. 82,5 with divider- N. 828 BLOCCASTOPPINO BP-06-32. – N. 828 roting pitching – N. 001 Unit U.C:F. / 1B-CN.
5x Signaling system for broken yarn SENSORFIL (year of make, 2×2002, 2×2003, 1×2008) for BLOCCASTIPPINO for ZINSER 450 (720 spindles), Composed by:- N. 828 SENSORFIL sensors S16 SC. 82,5 with divider- N. 828 BLOCCASTOPPINO BP-06-32/1B.- N. 828 roting pitching CR04 with TACCA. – N. 001 Unit U.C:F. / 1B-CN POW.System Version B.
1x ELECTRO JET, year 2012, Paletiser Machine, Fully automatic robot for paletising
1x ELECTRO JET, year 2010, Close Circuit Transport Chain for 1419 BOBBINS, Fully automatic load from the SCHLUMBERGER FMV32, Storage, Transport to the 6 Zinser RING SPINNING MASCHINES
1x LTG, year 2001, Ventilation and Climatization Center, Fully climatization system for the control of the entire facility
ELECTRO JET Laminating Machine
Cleaning System for Zinser ELECTRO JET Model LS-GR-AS-WR
Weighting Scale SCALTEC MOD SAC-71
Vertical Deposit 500 L. NEUMIN Nº 63577
Central Air ROLLAIR 30 CV
Compressed Air Drier EDELWEISS MOD EW7
Ground Deposit PVC SCHUTZ DE 2000L
High Pressure, container free, Central Air Conditioner ATLAS COPCO MOD.GA-55
Pirotubular Steam Boiler LOPEZ HERMANOS MOD.CBC 509-CE
Pressure Container PERLO TIPO C-8
Weighting Scale of Industrial Textiles Bales EPEL INDUSTRIAL
FOR MORE DETAILS PLEASE SEE PDF ON THE LINK
AC29/070121/AS/
SPINNING MACHINES
Seydel 870 Tow Strech Breaker
Year: 1995, auto doffing can 1000*1200
Finisher SANT ANDREA NOVARA RF2
Year: 1998, Auto doffing 24 head tube lenght 330 mm
Finisher NSC FMV 10
Year: 1990, auto doffing 24 head tube lenght 300 mm
1 Ring Cognatex idea 83 L
Year: 2003, 624 spindle ring dia 55 gauge 82,5 auto doffing
2 Ring Cognatex FLC 9
Year: 1984, 600 spindle ring dia 70 gauge 90 manuel doffing
1 Doubling Corghi
Year: 1996, 36 head 8 inch 4 ply
2 Shrinking Savio Espero Volufill
Year: 2003, 45 head 8 inch
Shrinking Motocono Steaming
Year: 2009, 24 head 8 inch
Carpet Yarn Fixage Superba B401
Year: 2006, 48 head 10 inch for acrylic carpet yarn
2 fancy Yarn lezzeni ftf / ds150 machine
Year: 2000, 144 spindle 150 mm diameter
1 Nylon Winding lezzeni Stv20
Year: 2000, 44 head nylon winding machine
8 Cone To Hank Fadis
Year: 2008, 14 head hank diameter 195 cm
4 Hank To Cone Hemaks
Year: 2004, 20 head 8 inch
1 Cone To Cone Milhan
Year: 2007, 20 head 8 inch
1 Zancaner , Auto cone package
1 Bale pres
1 JMS 620 GS- nl-c
Year: 2013, cogenaration electrik unit 3,35 MGW
AC29/170521E/ALLI-ALI/M/AS
Worsted Spinning
Seydel 870 Tow Strech Breaker
Year: 1998, CAN SIZE 1000 x 1200 AUTO DOFFING
NSC Re-Breaker R5 L10
Year: 1997, CAN SIZE 1000 x 1200 AUTO DOFFING, 10 FEEDS
Passage NO.1: NSC GC 15
Year: 1998, CAN SIZE 800 x 1200 AUTO DOFFING, REGULATOR (BAMS DRAFT), 10 FEEDS
Passage NO.2: NSC GC 15
Year: 1998, CAN SIZE 1000 x 1200, REGULATOR, 12 FEEDS
Passage NO.3: NSC GC 15
Year: 1997, CAN SIZE 700x 1200 2 SLIVERS 2 CANS DELIVERY , AUTO DOFFING, 6 FEEDS
Finisher NSC FMV 32
Year: 1995 model but modified 2017, auto doffing 24 head tube lenght 300 mm
4x ZINSER 451 RING FRAMES
Year: 2014, 1116 spindle ring dia. 57 gauge 82,5 draft system PK6000 autodoffing, with blower
Autoconer SAVIO ORION E
Year: 2003, 60 head 6 inc 4’20” loephe tk 840 mesdan 590 L one cone changer with blower
Autoconer SAVIO ORION E
Year: 2003, 64 head 6 inc 4’20” loephe tk 840 mesdan 590 L one cone changer with blower
Doubling Simet Machine
Year: 2005, 72 head 8 inch 3 ply with blower
4x SAVIO GEMINIS 302B TWISTING
Year: 2003, 240 head feeding 8 inch delivery 6inch pot dia 170 mm with blower
AA10/050121/
Sant Andrea Worsted Line
Composed of:
1x Gill box mod.CSN ARM year 1994, feeding cans creel, delivery 1 can 1000×1200 mm., 1 sliver.
1x Gill box mod.HC22 ARE year 2001, feeding cans creel, delivery 2 cans 800×1200 mm., 1 sliver each can.
1x 1 Gill box mod.HC22 year 2001, feeding cans creel, delivery 2 cans 800×1200 mm., 1 sliver each can.
1x Finisher mod.RF2B year 1993, 24 bobbins, tube 330 mm.
AE11/210720/
Acrylic Mill
1x Breaking converter – ТВ-10, Year: 1999
1x Breaking-mixing machine R5GC15, Year: 1999
1x Drawing machine GC15, Year: 1999
1x Drawing machine GC15, Year: 2001
1x Drawing machine GC15, Year: 2001
1x Roving machine FM-20, Year: 2003
2x Spinning-winding machine with steaming Zinser 319LSL, Yera: 1985 + Murata 7-V, Year: 1997.
this equipment is including following spare parts and materials:
toothed drive belts – app. 200 pieces
extra shafts for TB-10 – 19 pieces
rollers for drawing machines GC15 – 4 pieces
cans for drawing machines, dia 1300 mm, height 120 mm – 140 pieces
cans for drawing machines, dia 725 mm, height 120 mm – 200 pieces
roving holders for roving machine in boxes, absolutely new – 20000 pieces
yarn holders for Zinser 319LSL – 5000 pieces;
yarn spools for Murata – 2000 pieces.
Also delivery set is including complete technical documentation about selling equipment.
AC29/090520/AS/
COMPLETE SPINNING LINE
Year: 2018
Breaker NSC TB 20
Rebreaker NSC GC 40
Passage 1 GC 40 exit 1 sliver 1 can
Passage 2 GC 40 exit 2 sliver 2 cans
Passage 3 GC 40 EXIT 4 sliver 2 cans
Finisher FMV42 spindles 24 diameters 330 mm
6 Rings Zinsers 451 diameter 55 spindles 1116 gauge 82.5
3 Savio pulsars each 60 spindles Automatic clearer Zinet+
2 Savio Geminis feeding dupont 6×2 Exit 6-inch spindles 240
2 Savio Geminis feeding 8-inch Exit 6-inch spindles 300 each
1 assembly 96 spindles
INCLUDING COMPLETE DYEING LINE
One dyeing machine TOW no bobbins Made in france , year:2018 , diameter 180 cm capacity 2 tons
One solo press 2 ends Made in Turkey
One Santerviuge Made in Turkey
One dryer by steam ENES MAKINA 4 chambers total 18 tons, Made in Turkey
Bale press made in Turkey
INCLUDING
Superba LV3 model 2018 , Spindles 72
AA98/281020/
Cognetex Complete Line
1x Cognetex Integrated Re-breaker / blender
Year: 1990
Mod. SMC 400 11 B, Combs head with rotary flange drive
Feeding creel 32 positions by cans , N. 5 pre drafting cylinders
Delivery 1 sliver in 1 bobbin with automatic doffing.
1x Cognetex Gill Box
Year: 1990
Mod. SC 400 11 VA, Autoleveller
Combs head with rotary flange drive, Feeding creel 12 positions by cans/bobbins
Delivery 1 sliver in 1 can 700 x 1000 with automatic doffing.
1x Cognetex Gill Box
Year: 1990
Mod. SC 400 12 V, Combs head with rotary flange drive
Feeding creel 10 positions by cans
Delivery 2 slivers in 2 cans 700 x 1000 with automatic doffing.
1x Cognetex Gill Box
Year: 1990
Mod. SC 400 24 V, Combs head with rotary flange drive
Feeding creel 16 positions by cans
Delivery 4 slivers in 2 cans 700 x 1000 with automatic doffing.
1x Cognetex Horizontal Finisher FRC 300
Year 1990
With 20 bobbins, Autodoffing, Tube 300 x 60 mm.
Machine nicely maintained.
AF01/221020E/LI-L/M/BT/
Worsted Line
1 x Intersecting Cognetex SC 400, Autoleveller 1 x 1 can 700 x 1000, year:1994
1 x Intersecting Cognetex SC 400, 2×2 can 700×1000, year:1994
1 x Intersecting Cognetex SC 400, 4×2 can 700×1000, year:1998
AC29/220920/AS/
Acrylic Line
BREAKER
NSC TB 11, Year: 2002, 1000X1200 CAN
REBREAKER
NSC GC 15-R5A, Year: 2002, 1000X1200 CAN, 24 INFEED, 270 MM HEAD
1. PASSAGE
NSC GC 15, Year: 2001, 1000X1200 CAN WITH AUTOLEVELLER, 8 INFEED, 1X1 OUTPUT, 270 MM HEAD
2. PASSAGE
NSC GC 15, Year: 2001, 700X1200 CAN, 10 INFEED, 2X2 OUTPUT, 270 MM HEAD
3. PASSAGE
NSC GC 15, Year: 2001, 700X1200 CAN, 16 INFEED, 4X2 OUTPUT, 270 MM HEAD
RUBBING FRAME
FMV32, Year: 2000, 24 HEAD, 30 CM BOBBINS
COGNATEX RING FRAME
IDEA, Year: 2005, 6 SETS X 960 SP, 55 MM RING DIA, 82.5 MM GG, AUTODOFF AND OHTC
AC29/220920/AS/
Acrylic Line
BREAKER
NSC TB 11, Year: 2003, 1000X1200 CAN
REBREAKER
NSC GC 15-R5A, Year: 2003, 1000X1200 CAN, 24 INFEED, 270 MM HEAD
1. PASSAGE
NSC GC 15, Year: 2003, 1000X1200 CAN WITH AUTOLEVELLER, 8 INFEED, 1X1 OUTPUT, 270 MM HEAD
2. PASSAGE
NSC GC 15, Year: 2003, 700X1200 CAN, 10 INFEED, 2X2 OUTPUT, 270 MM HEAD
3. PASSAGE
NSC GC 15, Year: 2003, 700X1200 CAN, 16 INFEED, 4X2 OUTPUT, 270 MM HEAD
RUBBING FRAME
FMV 41, Year: 2003, 24 HEAD, 30 CM BOBBINS
ZINSER RING FRAME
RM450, Year: 2000, 4X 1200 SP, 50 MM RING DIA, 75 MM GG, MECHNICAL DRAFT, OHTC, AUTODOFF
ZINSER RING FRAME
421E, Year: 1996, 4 SETS X1100 SP, 50 MM RING DIA, 75 MM GG, MECHANICAL DRAFT,OHTC, AUTODOFF
AC29/300820/AS/
Worsted Spinning Line
Seydel Breaker 871
Quantity: 1, Year 2003
Zinser Ring 451:
Quantity: 5, Diameter 55 , Spindles 1116, 82.5mm Gauge, Year: 2012
NOTE: ALL RINGS ARE WITH AIR PRESSURE GUN.
Savio Orion-L Magazine:
Quantity: 3, 60 spindles, Output: 6 inch, Loepfe TK840, Year: 2002
NOTE: ALL WINDERS ARE LOEPFE YARN CLEANERS
Savio Geminis S224 B:
Quantity: 3, 288 Spindles, Feeding 6×2 , Year: 2005
NOTE: TWO FOR ONE DIR … (DOUBLE COIL BINDING SINGLE COIL OUTLET)
Savio Volufill Espero:
Quantity: 2, 45 Spindles, Output: 8inch, Year: 2002
AC09/240420/
Worsted Line
1x SEYDEL 870 , BREAKER
4x COGNETEX , SMC 400 Re-BREAKING MAC
1x KYOWA, 80SC CARD
3x COGNETEX SC400 , AUTO LEVELLIZER
1x SANT’ANDREA CSN , AUTO LEVELLIZER
3x COGNETEX SC400, HIGH GILL
1x SANT’ANDREA , BIE COILER
4x INGOLSTANDT ESD–51
2x COGNETEX CS 400
1x SANT’ANDREA SH–24
3x INGOLSTANDT FW–11 , ROVER/BOBBINER
1x BOBBINER 1 RF–2 , ROVER/BOBBINER
37x ZINSER 413–2 , SPINNER
1x ZINSER RM 450 , SPINNER
9x SCHALAFORST , GKU – 138 , AUTO WINDER
3x SCHALAFORST , GKU – 138DK , AUTO WINDER
1x SCHALAFORST , RM338 , AUTO WINDER
9x MURATA NO 23 , DOUBLER
6x MURATA NO 363 , DOUBLE TWIST
4x CROON LUCKE W400
4x ISHIKAWA HP400
1x DONG SUNG DONG SUNG
6x HAN CHANG HCAL – 500
1x SETTER , CHO IL, CL – S 500, 1994
3x COMPRESSOR
2x HUA TONG , BOILER
AE11/060320/
SEMI WORSTED COMPLETE LINE
NSC BREAKER, mod. TB-10.
NSC REBREAKER, mod. R5 GC 15.
NSC GILL BOX, mod. 656 RME.
NSC GILL BOX, mod. 683.
NSC GILL BOX, mod. 698.
NSC FINISHER, mod. FM-20.
2 RingSpinning machines “ZINSER 319 LSL”:
Ring’s diameter – 55.
Quantity of spindles – 700 (per each machines).
AG01/010320/BT/
Semi Worsted Complete Line
AG01/010320E/RL-AI/M/BT/
NSC Schlumberger Intersecting GillBox GC15
Quantity: 1
Year: 1996
Feeding: Bobbins/Cans 10 Doubling
Delivery: 1 Sliver in 1 Can 800x1000mm
With Automatic Doffing
AG01/010320E/TI-AI/M/BT/
COGNETEX SC600 22V
Quantity: 1
Year: 2003
Feeding: Cans 4x2 Doubling 800x1200
Delivery: 2 Slivers in 2 Cans 800x1200
With Automatic Doffing
AG01/010320E/CO-L/M/BT/
COGNETEX Horizontal Rubbing Finisher FRC 300S
Quantity: 1
Year: 1990
Number of Heads : 16
With Magitex Overhead Cleaner
With Automatic doffing
AG01/010320E/YI-L/M/BT/
COGNETEX Ring Spinning Frame IDEA 883R
Quantity: 1
Year: 2001
Number of Spindles: 624
Machine Gauge: 82.5 mm
Ring Diameter: 51 mm
Tube Height: 270 mm
Draft System: SKF PK6000
With Magitex Overhead Cleaner
Disposed For Linking with Cone Winder
AG01/010320E/LL-L/M/BT/
SAVIO Automatic Winder ORION
Quantity: 1
Year: 2002
Number of Heads : 60
Take up package : 4’20 (170X59X28mm)
Grooved Drum 2 Turns Spiral Asymmetrical diameter 94mm
Drum ONN/OFF Anti-Ribboning
Splicer: Mesdan Joinair 590L
Empty Tube Conveyor belt & Package toward the tail
Lighting along the machine
Clearer Sensing Head: Uster Quantum-C/O or Kesiokki SU-12
With Magitex Overhead Cleaner
Waxing device with motor
Hotair Discharge: Overhead Duct
AG01/010320E/LI-L/M/BT/
SAVIO High Bulk ESPERO VOLUFIL
Quantity: 1
Year: 1995
Number of Heads : 24
With Magitex Overhead Cleaner
Waxing Device with motor
Package Conveyor Belt towards the Tail
Feeding Package : 4’20-152mm
Lighting along the machine
Exhaust Fan for air discharge
Take up package : 5’57 ( 170X28X68mm)
AG01/010320E/OL-CI/M/BT/
Oerlikon Saurer Hollow Fancy Twisting Machine
Quantity: 1
Year: 2007
Model: Allma Fashionator EHP2
Number of Spindles: 72
Machine Gauge: 225 mm
Type of Feeding Tube: Flange 60mm Diameter Binder Tube
Take Up Package Length: 170 mm
Winding Traverse: 6 Inches
Type of Package : Conical 4’20
Including Winding Machine : Allma FlexiWinder / 12 Heads
Binder Tube Length: 240 mm
AB09/080120/
Zinser Ring Spinning & Roving Frame / Schlafhorst Winder
6 x Zinser Ring Spinning :
Year: 2002, Type: RM350, Each machine 1440 spindlesRing diameter 5 machines 40 mm, 1 machine: 45 mm, Gauge 70 mm, Auto doffing, SKF drafting
1 x Zinser Roving Frame :
Year: 2003, Type 668 , 144 spindles
2 x Schlafhorst Automatic Winders :
Type 338, Each 60 spindles, with Uster Quantum clearers
AD61/271219/AS/
Complete Worsted Line
AD61/271219E/RS-Y/M/AS/
1x SANT ANDREA NOVARA Melangeur:
Year:1997, 2M, 24 doubling, can diameter Ø700mm
AD61/271219E/C.CL-A/M/AS/
1x COGNETEX Gillbox pre-combing:
Year: 1986, SC 400 SC 12, 12 doublingØ700mm
AD61/271219E/C.CL-A/M/AS/
1x NSC Gillbox post-combing:
Year: 1970, GN4, 8 doubling, can diameter Ø700mm
AD61/271219E/C.CL-A/M/AS/
1x NSC Gillbox post-combing:
Year: 1974, GN5, 10 doubling, can diameter Ø700mm
AD61/271219E/AY-C/M/AS/
1x COGNETEX Gillbox 1st passage:
Year: 1986, SC 400 SC 11VA, 12 doubling, can diameter Ø1000mm
AD61/271219E/AY-C/M/AS/
1x COGNETEX Gillbox 2nd passage:
Year: 1996, SCE 400 SCE 11VA, 12 doubling, can diameter Ø800mm
AD61/271219E/AR-C/M/AS/
1x COGNETEX Gillbox 3rd passage:
Year: 1986, SC 400 SC 12V, 10 doubling, can diameter Ø700mm
AD61/271219E/AR-C/M/AS/
1x COGNETEX Gillbox 4th passage:
Year: 1986, SC 400 SC 24V, 16 doubling, can diameter Ø700mm
AD61/271219E/AP-C/M/AS/
1x COGNETEX Finisher:
Year: 1984, SFC 22- 22 spindles
AF25/291019E/LI-AI/F/CK/
PREPARATION LINE (with some spare parts)
1st Re-breaker/blender, Cognetex mod. SMC400 Type: SMC11V, Year 1988, 8 feeding creels , Can diam 700 mm.
2nd Gill box Cognetex mod. SC400, Type: SC11VA, Year 1996, with autoleveller, 8 feeding creels can dia.700 mm.
3rd Gill box Cognetex mod.SC400, Type: SC12V, Year 1988, 16 feeding creels, can dia.700 mm.
4th Gill box Cognetex mod.SC400 SC24V, Year 1988, 16 doubling, can dia.700 mm.
1 COGNETEX Finisher mod. SFC 22, Year 1988, 32 heads, Can 600 x 840
Condition of all machine: Perfectly Working
AE18/191019/BC/
Worsted Spinning Mill
NSC Schlumberger Screw Gill:
Quantity: 11
MIXING, GN6, Year: 1990 , CAN 700
GILL, GN6, Year: 1992, CAN 600, 1H + 1C
GILL, GN6, Year: 1992, CAN 600, 1H + 1C
GILL, GN6, Year: 1991, CAN 600, 1H + 1C+2S
GILL, GN6, Year: 1990, CAN 600, 1H + 1C
GILL, GN6, Year: 1991, CAN 600, 1H + 1C+A/L
GILL, GN6, Year: 1990, CAN 600, 1H + 1C+A/L
GILL, GN6, Year: 1990, CAN 600, 1H + 2C+2S
GILL, GN6, Year: 1993, CAN 600, 1H + 2C+4S
GILL, GN6, Year: 1990, CAN 600, 1H + 2C+4S
GILL, GN6, Year: 1990, CAN 600, 1H + 1C+A/L
NSC Schlumberger Finisher:
Quantity: 5
BOBBINER, FMV/36,Year: 1994, 16 S/P
BOBBINER, FM7A, Year: 1990, 20 S/P
BOBBINER, FM7A, Year: 1993, 20 S/P
BOBBINER, FM7A, Year: 1992, 16 S/P
BOBBINER, FM5P, Year: 1990, 6C + 12S
Schlafhorst Auto Winder:
Quantity: 4
X5 , Year: 2011, 40 S/P
338RM, Year: 2001, 40 S/P
338RM, Year: 2001, 50 S/P
A6 , Year: 2015, 40 S/P
Fadis Doubler
Quantity: 3
TUAN B-S, Year: 1995, 42 S/P
TUAN B-S, Year: 1992, 36 S/P
TUAN B-S, Year: 1995, 42 S/P
AF67/151019/AS/
Complete Spinning Line
2 NSC BREAKER TB-10, YEAR:1996-1997
1 NSC REBREAKER GC-40 R5, YEAR: 2016
3 NSC PASSAGE GC-30, YEAR: 2013
1 NSC FINISHER FM-42, YEAR: 2013
8 ZINSER RING 451: YEAR: 4X 2012-4X 2010, 1116 SPINDLE
4 SAVIO ORION AUTOCONER 60 HEADS AUTOMATIC YEAR: 2X2011- 1X2012- 1X2013
10 GEMENIS TWISTING, YEAR: 4X2005, 260 HEADS AND 6X2000,208 HEADS
3 SUPERBA HEATSET, YEAR:2X2014,60 HEADS – YEAR: 1X2013, 48 HEADS
AF67/151019/AS/
Complete Worsted Line
1 NSC BREAKER TB-20, YEAR:2013
1 NSC REBREAKER GC-30 R5, YEAR: 2013
3 NSC PASSAGE GC-30, YEAR: 2013
1 NSC FINISHER FM-42, YEAR: 2013
7 ZINSER RING 451: YEAR: 4X 2013-3X 2015, 1116 SPINDLE
5 SAVIO ORION AUTOCONER 60 HEADS AUTOMATIC YEAR: 3X2014- 2X2007(MAGAZINE)
7 GEMENIS TWISTING, YEAR: 4X2000-2X2002 300 HEADS AND 1X2005,360 HEADS
1 VOLUFIL ESPERO YEAR:1X2003(39 HEADS)-YEAR: 1X2003(36 HEADS)-YEAR:1X2002(30 HEADS)
AC29/101019/AS/
Acrylic Line
AC29/101019D/CI-P/M/AS/
2 Tow dyeing type longclose model 1996
Diameter 165
Capacity 1 tons per day
NOTE: STOPPED 8 YEARS
AC29/101019D/CO-AI/M/AS/
1 TOW dyeing type longclose model 1996
Diameter 165c
Capacity 2 tons
NOTE: STOPPED 8 YEARS
AC29/101019D/AL-O/M/AS/
2 solo press model 1996 made in Turkey
Diameter 165
NOTE: STOPPED 8 YEARS
AC29/101019D/AL-O/M/AS/
2 CENTRIFUGE type longclose model 1996
Diameter 165
NOTE: STOPPED 8 YEARS
AC29/101019D/RI-AI/M/AS/
1 bobbin dyeing type Then model 1996
Capacity 500 Kg
NOTE: STOPPED 8 YEARS
AC29/101019D/CI-AI/M/AS/
2 bobbin dyeing type Then model 1996
Capacity 250 Kg
NOTE: STOPPED 8 YEARS
AC29/101019D/CI-AI/M/AS/
2 bobbin dyeing type Then model 1996
Capacity 200 KG
NOTE: STOPPED 8 YEARS
AC29/101019D/CR-T/M/AS/
2 Stalam, 75 Kw model 1999
NOTE: STOPPED 8 YEARS
AC29/101019D/RL-AI/M/AS/
1 Stalam, 65 KW ( double lamp ) model 2004
NOTE: STOPPED 8 YEARS
AC29/101019D/CR-P/M/AS/
2 Bale press model 2000 made in Turkey
NOTE: STOPPED 8 YEARS
AC29/101019D/SL-AL/M/AS/
Breaker Seydel 679 model 1990
Rebreaker GC14 model 1995
NOTE: IN PRODUCTION
AC29/101019D/CIL-YI/M/AS/
GC15 ( passage 1995 )
Passage 1 delivery one sliver one can
Passage 2 delivery 2 sliver 2 cans
Passage 3 delivery 4 sliver 2 cans
Finisher FM32V spindles 24
NOTE: IN PRODUCTION
AC29/101019D/PL-AL/M/AS/
Volufil Espero 1995
Exit 8 inch
45 spindles
NOTE: IN PRODUCTION
AC29/101019D/LI-AI/M/AS/
3 Savio Geminis
Model 1998
DoPont 6×2
spindles 244
NOTE: IN PRODUCTION
AC29/101019D/RI-AI/M/AS/
3 savio Espero Autoconers
Model 1998
Spindles 60
Automatic
TK840
NOTE: IN PRODUCTION
AC29/101019D/LL-AL/M/AS/
2 Rings 421E model 1996
Spindles 1088 diameter 51
NOTE: IN PRODUCTION
AC29/210919E/SLI-YO.L/M/AS/
COMPLETE SPINNING LINE
Breaker 2006
Rebreaker 2001
3 passage GC 15. 2001
Finisher FM41v
5 Rings Zinsers 450 diameter 57 spindles 1116 model 2002/03
one Savio Orion magazine spindles 64 model 2002
2 savio orion Automatic spindles 60 model 2002
6 twisting eletex dopont spindles 208 feeding 6×2 Exit 6 model 2002
AC29/210919E/ACCL-TI/M/AS/
COMPLETE SPINNING LINE
Breaker TB11, model 2006
Rebreaker NSC GC15, model 2001
3 Passage GC15, model 2001
Finisher FM41 spindles 24, model 2006
6 Rings Zinsers 451 model 2009/2010 spindles 1116 diameter 57
2 Murata Autoconer 21 Magazine
5 Elitex feeding 6×2 spindles 208, model 2003