Showing 1–50 of 134 results

Show sidebar

AC09/150421/

Picanol Omni Airjet

Quantity: 40, Year:1999/2000, Shedding Mechanism:Cam, Working Width in cm:220, No Of Colors:2, No of Prewinder/Set:2, Shedding Motion Make:Staubli, Shedding Motion Type:Mechanical, Shedding Motion Capacity:8, Shedding Motion Installed Capacity:6, Selvedge Type:Rotary Leno, Easing Motion:Available, No of Back Rest Roll:2, Warp Beam Dia in mm:1000, No of Frames Supplied:4, No of Warp Stop Bar:6, No of Warp Beam Supplied:1, Take up Motion:Electronic, Let-off Motion:Electronic, Filling Detection Sensor Type:Front of Reed, Shedding Motion Model:1620B, Temple Type:19 x Full Width , Balance are Normal, Cloth Take-Up Type:Batching Motion 190cm

AB60/280321/AO/

Picanol Terry Loom TP800

Quantity: 1, Year: 2004,Width 220 cm, Warp Beam Position: 12.
The machine worked in Picanol Co. The machine plate shows OMP800, but it is changed to TP800, by Picanol Co. The machine is without accessories, so without feeders. Creel, etc

AB60/150321/AO/

Picanol Air Jet Terry Weaving Loom TES 6-J-260

Quantity: 1, Year: 2015, Type: TES 6-J-260, Working width 2600mm, 6 colours.
Equipment: SUMO, ELO, ETU, 6 weft colours, 6 weft feeders PICANOL type, 1 ground warp beam Ø 805 and fancy beam Ø 1000 mm, Cloth roller.
NOTE: “”SHOWROOM LOOM LIKE NEW””

AB46/010321/

Picanol Omni Plus 800 Air Jet Loom

Quantity: 17, Year: 2005-2006, Width: 220 cm., Model: OMP800-2-P, Staubli 1661 cam box year 2005/6, 2 feeders Picanol 1131/2231 CAN plus, 6 stop motion bars, Leno Selvedge, 1 beam 1000 mm. Flange diameter, With LDEC, Sumo motor, 2 color, Running at 750 rpm, Average of 4 harness frames per machine, Voltage 575

AA11/230221E/CS.T/C/F/CA/

Picanol Airjet Loom

Quantity: 36, Year: 2011, Type Omni Plus 800, Width 220cm, With Staubi 2861-B Type, Dobby for 12 Levers, 4 Colors, speed 800 RPM.
Each with: 4 Weft Feeder, 1 Warper Beam, 4 Quick Step, 1 Batching Motion, 5000 Heald and Dropp Wires.

AG62/230221D/AA.L-I.T/F/

Picanol Omni Plus Loom

Quantity: 16, Year: 2001, Width 2500 mm, Staubli 2861 dobby, 15 shaft, 4 color, 4 feeder – 8set, 2 feeder – 8set, (Before all 2 feeder), 5/6 heald frame, 1.5 beam, 1 Dropper bar, 5000 Dropper, 5000 heald, Batching device, Complete set

AB60/220221/

Picanol Air Jet Weaving Loom

Quantity: 2, Year: 2000, Type: OMNIplus-4-P-220 , Working width 2200mm, 4 colours, STAUBLI cam box type 1761 A with 9 levers installed
Each with: 4 heald frames for heddles 13” C DRC2, 4 warp stop motion bars, 5.000 healds & 5.000 droppers, ELSY L&R, 4 weft accumulators type 1131, without cloth roller, 1 warp beam diameter 1000m.

AB60/220221/

Picanol Air Jet Weaving Loom

Quantity: 1, Year: 2002, Type: OMNIplus-6-P-220, Working width 2200mm, 6 colours, STAUBLI cam box type 1751A with 6 levers installed
Equipped with : 4 weft accumulators 2231P, 1 warp beam, pre-equipped for batching motion but without batching motion, 4 heald frames SCHMEING 13” J, 5 warp stop motion bars, double warp tension, single pressure roll.

AB60/220221/

Picanol Air Jet Weaving Loom

Quantity: 2, Year: 12/2004, Type: OMNIPLUS-4-R-220, Working width 2200mm, 4 colours installed, With dobby STAUBLI type 2871, 12 levers (=full)
Equipment : SUMO, ELO, ETU, PFT, 4 weft colours, 4 weft feeders PICANOL type 1131CAN Plus, 1 feeder stand, 1 bobbin creel, double warp tension rolls Ø 120mm with easing motion right and left, 12 heald frames SCHMEING DRC2 13” J- type, warp detection GROB with 5 detection bars, 5000 healds, 5000 droppers, LENO-device right and left, electrical waste cutter right, 1 ELSY right, 1 warp beam Ø 1100mm, display, walking step, waste-system with dustbin, 1 external batching motion NEUENHAUSER type DW2618R with walking floor and lighting table.

AB60/220221/

Picanol Air Jet Weaving Loom

Quantity: 4, Year: 08–10/2000, Type: OMNIplus-F-4-P-250, Working width 2500mm, 4 colours installed, with eccentrics STAUBLI type 1661 with 8 levers installed (=full)
Each equipped with : SUMO motor, ELO, ETU, PRA, 4 PFT, 4 weft accumulators PICANOL type 1131PLUS, 1 weft stand, 1 creel for 4 bobbins, double warp tension roll diameter 120mm with easing motion right and left, KASUGA warp detection, 4 heald frames DRC2 13″ type J, 5000 healds, LENO-device right and left, ELSY right, electrical waste cutter right, 1 warp beam Ø 1000mm Q2, batching motion PBM with walking floor and inspection table, display, walking step, waste rewinding and dustbin.

AB60/220221/

Picanol Air Jet Weaving Loom

Quantity: 1, Year: 2000, Type: OMNIPLUS-4-P-250, Working width 2500mm, 4 colours (2 colours installed), With cam box STAUBLI type 1661, 8 levers (6 complete)
Equipment : SUMO, ELO, ETU, PFT, PRA, 2 weft colours complete, 2 weft feeders PICANOL type 1131Plus with balloon breaker and bobbin switch, 1 feeder stand, 1 bobbin creel, double warp tension rolls Ø 120mm with easing motion right and left, 4 heald frames Steel Heddle DRC2 13” J- type, warp stop motion GROB with 5 detection bars, 5000 healds, 5000 droppers, LENO-device right and left, electrical waste cutter right, 1 warp beam Ø 1000mm, display, walking step, waste-system with dustbin, external batching motion GROB construction year 2013.

AB60/220221/

Picanol Air Jet Weaving Loom

Quantity: 1, Year: 08/2001, Type: OMNIplus-F-2-P-220, working width 2200mm, 2 colours, with STAUBLI 1661 with 6 levers ‎installed (max. 8 levers possible) Each loom equipped ‎with : SUMO motor, ELO, ETU, 2 weft accumulators Picanol 1131plus, 1 weft stand, 1 ‎vertical creel for 2 bobbins, 2 warp tension rolls Ø 120mm driven by easing motion right and ‎left, with KASUGA warp detection, 4 heald frames Steel Heddle Hybrid Power 158 DRC2 13” ‎type C, LENO-device right and left, electrical waste cutter right, 1 warp beam Ø 940mm, 1 ‎cloth roll, display, walking step.‎

AE56/220221/

Picanol Omni Plus

Quantity: 40, Year: 2003, width 220cm, Staubi 2871 dobby, 4 color,3 feeder, 8 frame,1 beam 1 roller

AA05/210221E/CS-A.L/F/AS/

Picanol Optimax

Quantity: 180, Year: 2012,2013, w.w. 2200 mm.
26x looms, year 2012, 8 colours, Staubli dobby 3060
154x looms, year 2013, 4 colours, Staubli dobby 3020.
Dotation of all above looms per unit:
20 shafts, 10 shifts
4 x Roj Luna pre-feeders
1 x electronic roller beam of 1000 mm.
1 x electronic cloth roller big motion with inspection
6000 heddles and 6000 dropwires

2 x looms in 1 x 40” container
26 x looms year 2012, just in only one lot
154 x looms year 2013, in lot of minimum 24 pieces

AD26/140620E/AL-A/F/

Picanol Air Jet Looms For Terry

Quantity: 10, Year: 2001, model.TP-6-Y WW 260 cms, weft selector 8 colour, 4 weft feeders , 2 warp beams , 1 folder device , Jacquard Staubli CX 880 jc5 2688 hooks,

AA23/170221E/AY-C/M/AZ/

Picanol Omni Plus OMP-F-6-R

Quantity: 9, Year: 2003, Dobby: Staubli 2871, working width: 220 cm, 850 r.p.m., 3 colors, running condition, each loom:, Heald frames: 8, Healds and droppers: 6.000, Warp beam 1.5, Cloth roller: 1 , Looms excellent condition all working.

AE44/080221E/RA.L-A.L/F/AS/

Picanol Optimax

Quantity: 8, Year: 2010, 220 cm, Model FF. Staubli 2861 dobby 16 shafts installing, 10 frames, 4 feeders, 1,5 Warp Beams, 1.5 cloth rollers, 5.000 closed droppers, 5.000 Heald wires.
still running in Turkey

AB46/070221D/CRI-CI/F/AR/

Picanol Omni Plus Summum-F-4-R Looms

Quantity: 6
3 Picanol Summum 190cm Looms, 2017 year
Machines equipped with:
Staubli 1781A e3* DRC Cam Box
5 stop motion bars
Heddles and Dropwires as fitted
4 Weft Accumulators
2 – Beams
6 – Harness Frames
8 – Undermotions

3 Picanol Summum 220cm Looms, Years: 2015, 2017, 2018
Year: 2015 , Staubli 1681 cam box with 10 Harness Frames and 12 undermotions, this machine has top beam attachment
Year: 2017, Staubli dobby model S3260 e3* DRC/C4 Can – 10 Harness Frames and 16 undermotions
Year: 2018, Staubli dobby model S3260 e3* DRC/C4 Can – 4 Harness Frames and 9 undermotions
Machines equipped with:
5 stop motion bars
Heddles and Dropwires as fitted
4 Weft Accumulators
2 – Beams

These Machines ran 1 shift for less than 2 years.
The 2015 Loom was used in the Picanol Showroom and went into production in 2017 with top beam attachment added and software updates to match 2017 units.
Produced Greige Fabrics including flag material and sheeting.

AF74/060221E/RA-A.L/F/AS/

Picanol Optimax Weaving Machines

Quantity: 19, Year: 2012, Width 2.20, Free Flight, 8 colors, DRC2, Staubli 2861 dobby (max. 20 shafts)
Accessories per loom:
20 shafts fully installed, 10 heald frames, 8 Quick Steps, 4 weft feeders, 8000 droppers, 8000 wires, 1.5 cloth roller, 1.5 warp beam (diam. 1000mm)

AD22/280121/

Picanol OMNI-Plus

Quantity: 70, Year: 2002, Width 220 cm , 24 sets with Staubli 2871 dobby, 46 sets with positive cam, 8 heald frames , 2 nozzles, 2 weft feeders , 1 beam / cloth roller, Stopped in the mill floor.

AE44/060121/

Picanol Optimax

Quantity: 6, Year: 2012, 220 Cm , With GC system with Staubli Dobby 16 shafts installing, 10 Heald Frames, 4 Weft Feeders, 1 Warp Beam, 1 Cloth Roller, As on the looms droppers and Heald Wires.

AB60/060121/

Picanol Air Jet Weaving Loom

Quantity: 2, Year: 1996, Type: OMNI-2-P-250, Working width 2500mm
STAUBLI cam box 1620 with each 7 levers installed (can be increased to max.9), double warp tension rollers driven by easing motion, PRA, foreseen to work with batching motion but without the batching motion, 1 warp beam DIN. Ø 1000mm Q1, 2 weft accumulators IRO 2231B, 1 creel for 4 bobins, 4 heald frames DRC3 Schmeing Int Star EXTRA 13” J, both without warpdetection (machines have been used for weaving filament); 4000 healds 13” J with eye 5.5 x 1.2mm.

AB51/181220/AQ?

Picanol Gamma

1x Picanol Gamma, Year 2001 :
Working width 220cm,
Sumo motor, 8 colors, Staubli dobby
The loom equipped with:
12 Heald frames
4 weft feeders, 1 Beam
2 Cloth rollers, Heddles and Droppers

2x Picanol Gammax, Year 2003 :
Working width 220cm,
Sumo motor, 8 colors, Staubli dobby
Each loom with:
12 Heald frames
4 Weft feeders, 1 Beam
2 Cloth rollers, Heddles and Droppers

AA10/021220/

Picanol Airjet Weaving Looms

Quantity: 19, Year: 2000, Type OMNI PLUS, Width 250 cm, 4 colours, beam up to 1100mm, External batcher, With STAUBLI Jacquard machine Type LX 1600 year 2000, Format 3072, module M5/M6, JC5 controller.

AF74/251120/

Picanol Gamma Rapier Looms

Quantity: 20, Year: 10 x 1998 , 10 x 2000, Width 220cm, Staubli 2670 dobby, 16 shafts, Max 4 colors
Accessories per loom:
10 head frames, 2 Quick step, 2 weft feeders, 1,5 warp beam, 1 cloth roller, 5000 droppers, 5000 wires

AB60/241120/

Picanol Air Jet Weaving Loom

Quantity: 1, Year: 06/2001, Type: OMNI-4-R-220, Working width 2200mm, 4 weft colours installed, Electronic STAUBLI dobby type 2871 with 16 levers installed (= maximum)
Equipped with : ETU and ELO motor, 4 weft accumulators 2231, creel for 4 colours, 1 warp beam Ø 1000mm, 6 heald frames 13” C, 3000 healds, 3000 droppers, external batching motion but without the batching motion, Grob warp detection with 5 warp stop motion bars, double warp tension roll with easing motion R & L , double pressure roll, R&L support for selvedge split bobbins, waste dustbin, weaving step.

AB60/241120/

Picanol Air Jet Weaving Loom

Quantity: 1, Year: 2012, Type: OmniPlusSummum-F-4-P-250, Working width 2500mm, 4 colours (2 weft colours installed), with cam box STAUBLI type 1681, 8 levers (complete)
Equipment : SUMO, ELO, ETU, PFL, 2 weft colours, 2 weft feeders PICANOL type Picanol 1132 X2, 1 feeder stand, 1 bobbin creel with bobbin switch sensors for 4 bobbins, double warp tension rolls Ø 120mm with easing motion right and left, 4 heald frames GTP HYBRID POWER 158 DRC30-type, warp detection KASUGA / GROB, 4000 healds, 4000 droppers, E-LENO-device (motorized) right and left, electrical waste cutter right,1 warp beam Ø 1100mm, touchscreen, walking step, motorized waste-system with dustbin, Blue Box, external mini-batching motion NEUENHAUSER T250.

AB60/241120/

Picanol Rapier Looms Gamma-8-R-220

Quantity: 5, Year: 2002, Type: GAMMA-8-R-220, Working width: 2200 mm, 8 colours, Electronic STAUBLI dobby type 2861 with 24 levers installed.
Each equipped with: 8 heald frames, 1 warp beam Ø 1000mm, 1 cloth roller, 4 weft accumulators IRO LUNA. Free flight.

AE64/091120/

Poicanol Airjet Looms

Quantity: 12, Year: 2005, Mod. OMNI PLUS 800 F-2-R, Working width 2200 mm, Staubli dobby type 2881 ,16 shafts, 2 colors.
Accessories each loom : Picanol batcher with inspection table, 1 warp beam diam. 1000 mm, 7 heald frames, 5.000 heddles and 5.000 droppers, 2 Picanol weft feeders Can Plus type 1131, Warp stop motion 6 bars.

AB46/091120/AR/

Picanol Omni-2P 220 cm. Airjet Looms

Quantity: 80 , Year: 1999-2000, Model: OMNI-2-P, 6 undermotions, Staubli 1620B cam box , 2 feeders Picanol 2231B plus, 6 stop motion bars, Leno Selvedge, 1 beam 1000 mm. Flange diameter, With Alexco 190 cm. Off loom take-up with inspection (will wind up to 4,000 per roll), Average of 4 harness frames per machine, Machines are still installed on mill floor,

AC45/061120/

PICANOL GAMMA 4-R

Quantity: 6 ,Year: 2002, 250CM, 4 COLOURS, STAUBLI 2622 Electronic Dobby(8 shafts), Electronic let off, Electronic take up, leno-selvedge, full width temple, thermo cutter, warp stop motion PROTECHNA Laserstop 4081, Sumo Drive, batching motion, 4 weft feeders, 6 heddle frames, 5000 heddles and droppers, 1.5 warp beam(Ø940mm).

AC45/061120E/AR.L-A/

PICANOL GAMMA 4-R RAPIER WEAVING MACHINE

Quantity: 6 , Year: 2002 , nominal width 250 cm, Free flight system, 4 colours- Quickstep, Dobby Stäubli 2622, 8 levers installed, Let-off motion (ELO), leno-selvedge, full width temple, electron. controlled take up system (ETU), thermo cutter, warp stop motion PROTECHNA Laserstop 4081, with Sumo Drive -, Accessories each machine:, 4 accumulators ROJ Chrono with stand and bobbin creel, 1,5 warp beam (940 mm diam), batching motion , 6 harness frames, Delivery condition loaded in container

AE18/271020/

PICANOL GAMMA WITH CLUTCH TYPE RAPIER LOOMS

QUANTITY: 12, YEAR: 1999, WIDTH 2500 MM, MODEL : GAMMA WITH CLUTCH TYPE, WIDTH 2500 MM – 12 SETS, STAUBLI ELECTRONIC 2670 TYPE DOBBY, 16 LEVER INSTAL;LED, 6 COLOR BUT USED 4 COLOR ONLY, EACH LOOM EQUIPPED WITH, 03 WEFT ACCUMULATOR, 12 HEALD FRAME, 1.5 WARP BEAM, 1.5 CLOTH ROLL, 5,000 PCS HEDDLE WIRE, 5,000 PCS DROPPER WIRE, 06 WARP STOP BAR, 02 LENO BOBBIN

AB72/201020/

PICANOL LOOM OMP-F-4-J

QUANTITY: 4, YEAR 2001, REED WIDTH 250, WARP BEAM POSITION 13
1X WITH STAUBLI JACQUARD YEAR TYPE CX880 WITH GANTRY CONTROL TYPE JC5 MAX
1X WITH STAUBLI JACQUARD YEAR 2002 TYPE CX880 WITH GANTRY CONTROL TYPE JC5 MAX
1X WITH STAUBLI JACQUARD YEAR 2008 TYPE CX880 WITH GANTRY CONTROL TYPE JC5 MAX
1X WITH STAUBLI JACQUARD YEAR 2017 TYPE CX880 WITH GANTRY CONTROL TYPE JC5 MAX
HOOKS CAPACITY 2688, NUMBER OF HOOKS INSTALLED 2650, BATCHING MOTION, 4 WEFT ACCUMULATORS, 1.5 WARP BEAMS, 6 WARP STOP BARS, WARP BEA, DIA 1000MM, SELVEDGE: LENO, TEMPLE: NORMAL, BACK REST ROLL 2, ELECTRONIC TAKE OF AND LET OFF.

AB72/201020/

PICANOL LOOM OMP-F-4-J

QUANTITY: 3, YEAR 2005
REEDWIDTH 250, WARP BEAM POSITION 13 , WITH STAUBLI JACQUARD YEAR 2004 TYPE LX1600 WITH GANTRY CONTROL TYPE JC5 MAX HOOKS CAPACITY 2688, NUMBER OF HOOKS INSTALLED 2650, BATCHING MOTION, 4 WEFT ACCUMULATORS, 1.5 WARP BEAMS, 6 WARP STOP BARS, WARP BEA, DIA 1000MM, SELVEDGE: LENO, TEMPLE: NORMAL, BACK REST ROLL 2, ELECTRONIC TAKE OF AND LET OFF.

AB72/201020/

PICANOL LOOM OMP-F-4-J

QUANTITY: 2, YEAR 2000
REEDWIDTH 250, WARP BEAM POSITION 13 , WITH GROSSE JACQUARD YEAR 2001, TYPE EJS 2000 WITH GANTRY CONTROL TYPE C 15, HOOKS CAPACITY 2688, NUMBER OF HOOKS INSTALLED 2240, BATCHING MOTION, 4 WEFT ACCUMULATORS, 1.5 WARP BEAMS, 6 WARP STOP BARS, WARP BEA, DIA 1000MM, SELVEDGE: ROTARY LENO, TEMPLE: NORMAL, BACK REST ROLL 2, ELECTRONIC TAKE OF AND LET OFF.

AB72/201020/

PICANOL LOOM OMP-F-4-J

QUANTITY: 2, YEAR 2004
REED WIDTH 250, WARP BEAM POSITION 13, WITH STAUBLI JACQUARD YEAR TYPE LX1600 WITH GANTRY CONTROL TYPE JC5 MAX, HOOKS CAPACITY 2688, NUMBER OF HOOKS INSTALLED 2650, BATCHING MOTION, 4 WEFT ACCUMULATORS, 1.5 WARP BEAMS, 6 WARP STOP BARS, WARP BEA, DIA 1000MM, SELVEDGE: LENO, TEMPLE: NORMAL, BACK REST ROLL 2, ELECTRONIC TAKE OF AND LET OFF.

AB72/201020/

PICANOL LOOM CAM OMNIPLUS SUMMUM F- 4-P

QUANTITY: 1, YEAR 2014
REED WIDTH 250, WARP BEAM POSITION 13 , CAM STAUBLI, 1671 MECHANICAL, SHEDDING MOTION CAPACITY 7, INSTALLED: 4, 4 FRAMES, ELECTRONIC LET OF AND TAKE UP, TEMPLE: NORMAL, FILLING DETECTION SENSOR: ALONG WITH REED, BATCHING MOTION, 4 WEFT ACCUMULATORS, BACK REST ROLL 2, 6 WARP STOP BARS, 1.5 WARP BEAM,WARP BEAM DIA 1000MM, SINGLE BEAM.