Showing all 11 results

Show sidebar

AA02/151123/

Saurer Alma Ring Twisters

Quantity: 8, 144 Spindles/machine, Single Creel each machine, 6 ¾” Ring Inside Diameter, 7” outside diameter, Uses a 5 ¾” Diameter Bobbin, Bobbin capable of a 14” Traverse, Running 840 to 1260 denier nylon and polyester, Have run fibrillated polypropylene, 600 volts.

AA10/170723/

Beautiful Small Unit For Twisting Silk Yarns

including :
– 1 VINCO silk wetting machine, Year 1995, Type SILK PRESS GK20
– 1 COLLEONI Assembly winder, 2 x 30 spindles, Reception on 180 mm bobbins
– 2 ACBF 2 x 1 Twisters, Year 1985, 160 spindles each, Cans dia. 130 mm
– 1 LAFFONT reeling machine 2 x 40 spindles

AC29/100723E/OSI-X/F/AS/

Superba TVP3 & Volkmann Cabling

1x Superba, Year: 2016, 72 spindles.
2x Volkmann 05-0-C-F Cabling, Year: 2013, 176 spindles.
Very good condition

AA02/110223D/LC-Y/F/AR/

Saurer Alma Ring Twisters

Quantity: 6, Model AZB, 144 Spindles/machine, Single Creel each machine, 6 ¾” Ring Inside Diameter, 7” outside diameter, Uses a 5 ¾” Diameter Bobbin, Bobbin capable of a 14” Traverse, Running 840 to 1260 denier nylon and polyester, Can run fibrillated polypropylene also. 1 double flanged bobbin per spindle comes with each machine.

AA08/131222E/YR-O/F/

Hamel Saurer TFO Elastotwister

Quantity: 1, Year: 2001, Mod. ET 240 C MIT, n.200 spindles (2 sided), Exit on cone conicity 4°20’, Basket diam. 5”, Max speed 14.000 turns/min, Torsion S and Z, Sensors for Lycra and yarn output control, Electronic regulation of the lycra stretching.

COMPLETE WITH:
n.1 Assembly machine HAMEL mod. HD MIT
Year: 2001, n.12 positions, Winding S and Z, n.2 sensors for lack of yarn control per head, to couple up to 2 yarn on the flanged spool, Mesdan splicer knotting machine, Traveling blower.

Requires 2×40′ High Cube

AD26/121222E/RY-R/M/

Hamel Twister & Hamel Assembling

Hamel Twister (Double Twisting)
Quantity: 3, Year: 1995/1996, model H2000, type 2016-F, 192 spindles.

Hamel Assembling
Quantity: 1, Year: 1998, model HDW-R, 12 heads, 2 ends assembling for 1 head, feeding creel for cones or bobbins 4 positions for 1 head.

Ctrs requiremenet for shipment: 7 x 40′ containers HC.
Requires 30 pallets.
600 tubes will be available with the machines.
Additionally: 424 tubes can be given at Eur 25 each.
Additionally: 16 stainless steel trolleys for tubes, at Eur 250 each.

AA02/291122/

Saurer Allma 2/1 Twisters

Quantity: 3, Year: 1×1990 , 2×1988, Model 220 B, 160 Spindles each, 2 x 6 Feed, Inner pot diameter 235mm, Outer pot diameter 260mm, Pot depth 360mm, 10” Traverse, Oiling, Cone Take Up / 3º 51′, Dual Drive.

AH22/161022D/AA-R/M/BO/

Saurer Allma Filament Twisting

Quantity: 100, Year: 1995, Type: FHT (Filament HT), No of Spindle: 320, Gauge: 280 mm, Feed Tube Length: 320 – 470 mm, Denier: 500 D – 1500 D, Twist Range: 400 to 4000 TPM, 380/50/3.
Machines can do filament yarn from 50 Denier to 1500 Denier, with Twist Change of wheel and RPM, Factory gives extra Twist Change Wheel and Tooth Wheel for TFO, Example for High Denier Yarn, TPM below 700 and RPM around 5000.

AH22/061022D/AA-C/F/BO/

Saurer Allma Filament Twisting

Quantity: 20, Year : 1995, Type : FHT (Filament HT), No of Spindle : 320, Gauge : 280 mm, Yarn Range : 33 – 330 dtex, Feed Tube Length : 320 – 470 mm, Twist Range : 400 to 4000 TPM, 380/50/3.

AA08/170922/AQ/

Volkmann Bauart 3.16 Double Twisting (2×1) Frame

Quantity: 1, Year: 1981, n.120 spindles, Feeding 10″ from assembly winder (tube 290 mm) , Basket diam.235 mm, Exit 8″ (200 mm) (tube 230 mm), Conicity 4°20′, Pneumatic threading, Splicer Mesdan mod.ATS 114 (1 device per side).

*AA08/120922/

Volkmann Double Twisting (2×1)

Quantity: 1, Year: 2004, Elastotwist type 300, n.180 Spindles, Exit pitch 6″(152 mm), Conicity 4°20′, Feeding by flanged cops.