AE56/020621/
Krantz K30 Stenter
Year: 2008, Oil heated, Width in 260cm, 8 chamber,with origin edge-detecter, With Edge cutting and suction device.
AF07/290521D/CIS-AS/M/AT/
Krantz Stenter Frame
Quantity: 1, Year: 1998, Model KM16-2, Chain with pins and clips, Thermal oil, Boiler brand Konus Kessel BKV 1250/25, Finisher pader with 3 rollers, Roller weft straightener Mahlo, 42 m. oven length, 2200 mm. Width
AD78/220321/
Krantz Stenter Moneus K30
Quantity: 1, Year: 2003, 6 chambers, ww 3400 mm, Gas fired burner Maxon horizontal pin/clip chain.
AD92/160321/
Krantz stenter
Quantity: 1, Year: 1999, 2.80 m, Vertical chain, 7 chambers, Gaz padder ortomat.
AD76/080321/AS/
Krantz Stenter Machine
Quantity: 1, Year: 2003, 3.40 mt working width, 3.60 mt roller width,8 chambers,horizontal chain, pin,Erhart Leimer fabric opener (2013 model),padder (padder is rerubberised in 2020 October),Mahlo weft straightener both at the entrance and at the exit (2013 model),chain is replaced with brand new one at the end of 2018,video system at the entry and at the exit,humidity control device,Siemens PLC,Siemens invertor,plaiter and dock rolling at the exit,Maxon burners, gas heated,, SITUATION: INSTALLED and RUNNING
AB86/190221/
STENTER KRANTZ K30
Quantity: 1 , Year: 1999, WIDTH 3,00M
Details: Working width 300cm,, Heating by GAS (Burner Maxon), 7 Chambers of dry, Chain with pin/clip system, Equipped of weft straightener MAHLO and PADDER, 2 Cylinders, Exit on folder, Machine working on mill floor in good condition
AD22/030820D/AAI/C/
Krantz K30 Stenter
Quantity: 1, Year: 2008, Roller width：260cm, Working Width: 240cm, Drying chambers: 10, Origin Heating : Oil Heating, Vertical pin chainWith centring device, With padder, Running in the mill floor, German Origin,
AB72/021020/
KRANTZ STENTER
QUANTITY: 1, REFURBISHED IN 1999 AND FITTED WITH NEW BURNERS AND OPERATORS TEMP CONTROLS.
4 BAYS, GAS HEATED, VERTICAL PIN AND CLIP CHAIN
MANUAL WEFT STRAIGHTER WITH SCROLL ROLLERS
LONG ENTRY WITH GUMMING AND TRIMMING SUITABLE FOR KNITS AND WOVEN, EXIT WITH COOLING ZONE
A FRAME BATCHER AND PLAITER
AE56/120820D/AIO-P/C/
Krantz Stenter
Quantity: 1, Year: 2004, Type: K30 , Germany origin, Oil heated, Width in 260cm, 8 chamber, 1 padder, Vertical chain.
AE56/250520/BA/
Krantz K30 Stenter
Quantity: 1, Year: 2009, width 240cm, Germany origin, 10 chamber, oil heated, pin chain.
AC23/210420E/ACI-AI/F/BM/
Krantz Stenter
Quantity:1, Year: 1998, Vertical Chain, Model: K20, Width: 2400mm, Burner Type: Gas, Chambers: 6 Chambers, Bianco Padder, Weft Staigtener, Pin, In Production
AB55/171019/
Krantz Multilayer Stenter
Quantity: 1, ww: 2200 mm / Table Width 2400 mm
Composed of:
Inlet combination, 3 bowl Beta Padder, 1 Mahlo Weft straightner, KM15 Krantz 3 section 3 Passages stenter gas heated vertical pin chain, Corino 1999 Pin Wheel Weft Straightner, Outlet combination small roll/big roll Excellent Condition
AE18/091019/BC/
Krantz Flat Stenter
Quantity: 1, Year: 2001
For Knitted Fabrics, Width : 2400 mm, 8 nos chamber, Gas fired heating (LNG natural gas), Horizont chain pin + clip, with Padder, A complete stenter frame for knitted goods, Delivery : immediatrly, Condiyion : Still installed in mill floor
AE56/230919/
Krantz Stenter
Quantity: 1, Year: 2003, Width 260cm, 8 chambers, Oil heated, With center padder, Without straightener, Vertical chain, Running condition
AD92/230919/
Stenter Krantz
Quantity: 1, Year: 1994 reconditioned in 2019, w.w. 2.60 m, 7 chambers, vertical chain, oil with padder and ortomat
AD26/160919/
KRANZ STENTER KM 16
Quantity: 1, Year: 1995, 6 passages, inside capacity 42 meters.
N° 6 Metan gas burners, speed 60 meters/minute, working width from 800mm to 2000mm.
TMT PADDER, MODEL 3FC, YEAR 1995, with two rubber cylinders and one ebonite central cylinder, speed 80 m/min, width 1800mm
CORINO WEFTSTRAIGHTENER, MODEL MK2 OTTICO, YEAR 2002, 4 reading heads
AD76/190819E/ACI/F/
Krantz Multi Pass Stenter
Quantity: 1, Year: 1999
1.80 working width, 2 mt machine width, 6 pass, 58 mt fabric capacity, Ideal for denim/thick fabric, vertical chain, pin, telescobic width opening shaft, Dock rolling, plaiter, gas heated, PLC, invertor, Electric panel full reconditioned, installed and running situation.
AB72/080819/
KRANTZ STENTER MULTI LAYER (TENTER)
QUANTITY: 1, YEAR: 2002, TYPE KM 16 CORINO WEFT STRAIGHTENER TYPE MK OTTICO RUNNING SPEED 60 METER PER MIN E+L GUIDERS & UNCURLERS AND OVER FEED, HEATING WITH 6 MAXON VALUPAK GAS BURNERS VERTICAL PIN CHAIN, 6 PASSES 3 CHAMBERS CLOTH CONTENT 42 METER ENTRY WITH TMT 2 BOWL FINISHING PADDER EXIT WITH COOLING ZONE AND PLAITER