Showing 1–50 of 82 results
Quantity: 1, Year: 2010, Model: RF 2 x 40 kW, Width 1600 mm, Installed power 15 KVA, Voltage supply: 380 V, 50 Hz, Phase 3+N+earth, max current: 32 A, Short circuit current: 150 KA, Entry Height: 22 cm, (little used), Machine is water cooled
1) HYDRAULIC PRESS CAVISA FOR THE FILLING OF THE CARRIERS with a compactor of fibers in the same press for loading of material and automatic water irrigation.
Motor 10 HP.CARRIER displacement in moat automated pneumatic cylinder with digital scale recessed pit with capacity of 3 t for the precise control of weight filling.
2) AUTOCLAVE VERTICAL CAVISA MODEL ATUV TO 400 KG. / flock. in a single package.
40 CV with 3000 l preparation tank. with two Stirrers and steel stainless tank added with 4 HP pump.
3 carriers, Auxiliary tank of 1000 litre. steel stainless pair provides automatic to the autoclave.
3) Hydroextractor CAVISA model CCM2 (1380 / 1050) for 400 kg. / flock.
A single package corresponding to the full load of the autoclave. Brake and tire cover.
Engine 25 HP. With speed Variator.
4) OPENER FOR WET MATERIAL CAVISA with ruffle opener of large diameter with HARDENED STEEL TOES
Rotating and hydraulic lift platform for the correct dosage of material Charger to a opener 1.2 m wide
With large-diameter , drum equipped with nails
With pneumatic extraction of the material sended directly to the dryer.
5) DRYER FLEISSNER OF 3 DRUMS of 1.1 m working width. Equipped with conveyor and fine opener for feeding to the drying area, fans, outlet with collector,
transporter of dried fiber, and electrical control cabinet.
Quantity: 1, Year: 2016, Type BERTA 18, 24 packages/cycles, Package max ext. diam. 190 mm and H= 170 mm.
Quantity: 1, Year: 2006, For flock and bumps, Type TD 85A, Power 85 KW 380 V, Belt width 1750 mm, Height of the tunnel entry 450 mm, Cooling system of the triode, by air, with energy recovering, Steam extraction device, Air cooling system at the delivery, PLC for automatic control.
QUANTITY: 1, YEAR: 1992, MODEL:OMP BODEGA, WEIGHT OF THE FEEDING SLIVERS: 16/24 GR/M. 200/300 GRAINS/YARDS, DOUBLING: 16
DRAFT: 3.4/8.8, OUTGOING VEIL: 50-60 GR/MT. 700+900 GRAINS/YARDS, PITCH OF THE HEAD: 687 M/M 27”
WIDTH OF PINNED SETOVER AND OF PRINTING ROLLERS: 500 M/M 19” 11/16, HORSEPOWER OF MOTOR: 2 CV HP, PRODUCTION IN 8 HOURS: 400/500 KG. 900/1100 LBS, THEORETICAL PORTION OF PRINTING HEAD SURFACE: BETWEEN 18 TO 85 %
TWO PRINTING CYLINDERS, PNEUMATIC CONTROL OF PRINTING CYLINDERS PRESSURE
FEEDING FROM TOPS BOBBINS OR CANS (24 ENDS), DRAFTING HEAD WITH COMBS, DELIVERY ON TROLLEYS
STAINLESS STEEL TANK WITH MIXER FOR PRINTING BATH PREPARATION, ACCESSORIES LIKE BACK WASHER, SETTING MACHINE, ETC: AFTER PRINTING THE SLIVER MUST BE STEAMED IN CONVENTIONAL AUTOCLAVE FOR SETTING AND THEN GO TO A BACKWASHING LINE.
MACHINE IN VERY GOOD CONDITION ALL PARTS CLEANED AND TESTED BEFORE DELIVERY.
Quantity: 1, Year: 2012, For yarn packages and tops, Cooling system : Air forced, 30 kW, Very good condition