Showing 1–50 of 95 results

Show sidebar

AA02/160421/

Dornier PTS1.J Rigid Rapier Weaving

Quantity: 1, Year: 2007, (Specially Designed), AT Dialog 2 Control Panel, 150cm waving width, Single weft feed, Single Rapier weft insertion from Left side, Single weft transition to right side with positive rapier opening, And closing at both sides, Electronic Take up, Electronic synchronized Let off from Creel with, Tension equilibria drag roller, Shedding by Staubli Jumbo Jacquard, Model Unival 100, JC6 Controller, Direct Electronic synchronization to the loom without conventional, Jacquard drive shaft, 5000 hooks individually driven with individual servo motors to control, Infinitely variable hook lifting sequences, Take up to extended pull platform synchronized to the take up beam, Functional for the manufacture of fabric on a linear flat platform as, Opposed to rolled fabrics.

AA02/160421D/CT-C/

DORNIER RAPIER LOOMS HTV4/SD

Quantity: 3, Year: 1992, AT Dialog 1 Control Panel, 210cm working with, 4 Color Weft Selection, Staubli Electronic Dobby, Model 2667 – 16 lever capacity, 9 levers installed Running 4 Harness, Electronic Take up, Electronic Let off, Without Batchers (Off Loom Take up), Leno Selvedges, Each loom supplied with, Without Beams, 10 Harness Frames, 4Sevi-Tec B Weft Feeders and Creel Stand, 4 Warp Stop Bars, Power supply 400/440 Volts 3 phase 50 Hertz

AB46/160421D/YC.L-R/F/BS/

Dornier PTV/4S Rapier Weaving Looms

Quantity: 6, Year: 2001, Width: 210cm, Staubli Electronic Dobby 2670 with 10 levers, Running 500 RPM, Harness Frame Capacity: 20 with 10 levers installed, Harness Frames installed: 6, Heddles installed: approximately 4000, Warp Stop Bars: 6 with 4000 drop wires installed, Prewinders: 2 installed – 4 capable, Cloth roll: 1 with 500mm diameter, Warp Beams: 1.5 with 800mm flanges, Prewinder Switch Off , Looms are moved from weaving hall to an adjacent hall by skilled technicians. Test run is possible.

AB46/160421D/RL.L-R/F/BS/

Dornier PTV/2S Rapier Weaving Looms

Quantity: 22, Year: 2001, Width: 210cm, Staubli Electronic Dobby 2670 with 10 levers, Running 500 RPM, Harness Frame Capacity: Maximum 12 with 10 levers installed, Harness Frames installed: 6, Heddles installed: approximately 4000, Warp Stop Bars: 6 with 4000 drop wires installed, Prewinders: 2, Cloth roll: 1 with 500mm diameter, Warp Beams: 1.5 with 800mm flanges, Prewinder Switch Off , Looms are moved from weaving hall to an adjacent hall by skilled technicians. Test run is possible.

AB34/150421E/TA-Y/F/BY/

Dornier PTS 8/S Loom

Quantity: 1, Year: 2004, w.w. 220 cm, with creel
(at this point, the loom weaves fiberglass, but also other fibers.)
Equipment: 6 harnesses, 2 Galaxy Luna feeders x 2, Harness strings: 5000 pcs, 20 harness hooks.
The looms are running.

AA10/240321/

Dornier Loom PTS8/S

Quantity: 1, Year: 2007, Width 2200 mm., Dialog Panel 2, 4 colours, ECS,,EWL, ECT, Electronic Dobby Staubli 2670/2 – 20 levers, PSL, Predisposed for Tuking Device, Air Guide, Rapier HS3, Warp Stop Motion Grob – 6 bars.

AA10/070421E/PP-P/M/AQ/

Dornier Looms HTV4/SD

Quantity: 8 , Year: 1989/88, width 1800 mm., 2 colours, Staubli dobby type 2117, 6 shafts.

AE02/070421/

Dornier Loom HTV 6/S

Quantity: 1, Year:1998, ww. 1900 mm, 6 colours, Stäubli electr. dobby 2600, controller AT 1, 16 levers (all installed), 3 cloth roller, 6 pre-feeder, electr. warp let-off (EWL), electr. colour selector, no heald frames, no warp beams. Loom is still running.

AE02/070421/

Dornier Looms HTV S4/S

Quantity: 2, Year: 1995, ww. 1900 mm, 4 colours, Stäubli electr. dobby 2667 RS, controller AT 1, 14 levers (all installed), 4 pre-feeder, electr. warp let-off (EWL), electr. colour selector, no heald frames, no warp beams, no cloth roller
Looms are still running.

AE02/170321/AN/

Dornier jacquard loom HTV S8/J

Quantity: 1, Year: 1996, ww. 2000 mm, with Grosse jacquard EJP2 (year 1998), 4464 hooks, 3 pre-feeder, 2 colour selector,1 cloth roller

AB08/110321/BJ/

DORNIER RAPIER LOOMS HTV 4/J

Quantity: 6, Year: 1991, WORKING WIDTH: 2000MM, ELECTRONIC STAUBLI JACQUARD CX 860 FOR 2688 HOOKS (1996), CONTROLLER: JC 4, UP TO 4 COLOURS, WARP BEAM DIAMETER 800MM, BATCHING MOTION
INCLUDED PER MACHINE:
1,5 X WARP BEAMS, 4 X IRO IWF 9207 WEFT FEEDERS
Machines are still running, Machines are used to manufacture acrylic blankets.

AE44/110321E/ALA-AA/F/AS/

Dornier Airjet Terry Towel

01 Dornier Airjet Terry Towel 2003 Years 190cm Terry Towel With STAUBLİ Jacqaurds JC5 controller 5120 hooks
01 Dornier Airjet Terry Towel 2003 Years 260cm Terry Towel With STAUBLİ Jacqaurds JC5 controller 6144 hooks
02 Dornier Airjet Terry Towel 2003 Years 260cm Terry Towel With STAUBLİ Jacqaurds JC5 controller 3072 hooks
Accesories:
2+2 Warp Beams, 2+2 cloth Rollers, 03 Iros, 5000 Droppers
still running

AG72/190221/BT/

Dornier Air Jet Looms

Quantity: 11, Year: 2002, Width: 190 cm, Type: EWV 6E, Single Beam, Shedding Cam, year: 2001, Dobby Type: 1661, 6 Frames (1x machine 12 frame), 4 colours.

AA23/200221/AZ/

Dornier PTS8 / PTS4 Rapier Looms

Quantity: 16, Year: 2014, Working width: 1900 mm
10x looms 8 colours (8 ecs 8 weft accm) and 6x looms 4 colours (4 ecs 4 weft accm)
Each equipped with : 1.5 warp beam, 1.5 cloth roller, gantry included
Electronic staubli dobby type 2668 having 12 levers capacity but only 1 lever installed and 1 heald frame (for embroidery)
Jacquard STAUBLI type LX 1602 format 3072 hooks fully installed, controller JC7, side tucking.

AA23/100221/AZ/

Dornier Pneumatic Jacquard Loom

Quantity: 1, Year: 1999, Type HTVS 4/J, w. w. 210 cm
STAÜBLI jacquard machine, type CX880 format 1408, Gallery thread quantity 9985, 4 colors, 1 fabric roller, 1 warp shaft, 10,000 lamellas, lamella apparatus.

AA23/100221/AZ/

Dornier Pneumatic Jacquard Loom

Quantity: 1, Year: 1999, Type HTVS 4/J, w. w. 210 cm, STAÜBLI Jacquard machine, type CX880 format 1408, Gallery thread number 9100, 4 colors, 1 fabric roller, 1 warp shaft, 10,000 lamellas, lamella apparatus.

AA23/100221/AZ/

Dornier Pneumatic Jacquard Loom

Quantity: 1, Year: 1999, Type HTVS 4/J, w. w. 210 cm
STAÜBLI jacquard machine, type CX880 format 1408, Galley thread quantity 9985,, 4 colors, 1 fabric roller, 1 warp shaft, 10,000 lamellas, lamella apparatus,

AA23/100221/AZ/

Dornier Pneumatic Jacquard Loom

Quantity: 1, Year: 2005, Type PTSL8 EASY LENO, w. w. 220 cm, the machine has two warp shafts, upper and lower, 8 colors, 1 fabric roller, 1 warp shaft, 5000 lamellas, lamella apparatus, 3 reeds.

AA23/100221/AZ/

Dornier Pneumatic Jacquard Loom

Quantity: 1, Year: 1999, Type LWV 4/J, w. w. 210 cm, STAÜBLI jacquard machine, type CX880 format 1408, Gallery thread quantity 9985, 4 colors, 1 fabric roller, 1 warp shaft, 10,000 lamellas, lamella apparatus.

AA23/100221/AZ/

Dornier Pneumatic Jacquard Loom

Quantity: 1, Year: 1999, Type LWV 4/J, w. w. 210 cm
STAÜBLI jacquard machine, type CX880 format 1408, Gallery thread number 5940, 4 colors, 1 fabric roller, 1 warp shaft, 60,000 lamellas, lamella apparatus.

AA23/100221/AZ/

Dornier Pneumatic Jacquard Loom

Quantity: 1, Year: 1999, Type LWV 4/J, w. w. 190 cm
STAÜBLI Jacquard machine, type CX880 format 1408, Gallery thread number 16389, 4 colors, 1 fabric roller, 1 warp shaft, 16,500 lamellas, lamella apparatus.

AA23/100221/AZ/

Dornier Pneumatic Jacquard Loom

Quantity: 1, Year: 1999, Type LWV 4/J, w. w. 190 cm
STAÜBLI jacquard machine, type CX880 format 1408, Thread number 7280, 4 colors, 1 fabric roller, 1 warp shaft, 10,000 lamellas, lamella apparatus.

AB51/080221E/RL-C/F/AQ/

DORNIER PTV 5/S

Quantity: 2, Year: 2002, w.w. 230cm – Staubli Dobby 2670 (18 shafts installed)., Each loom Equipped with:, 4 ECS, 12 Heald frames, 4 Weft feeders, 2 Beams, 2 Cloth Rollers, Heddles and Droppers, Status:working, Delivery time: April

AB52/080221/

Dornier AWS-2-L Easyleno Airjet looms

Quantity: 2, Year: 2012, New PANEL SE., Width 190 ; EasyLeno Type, 2 colours ; 2 weft feeders, Beams diameter 1000 mm, Upper beam.

AB52/080221/

Dornier AWS-2-L Easyleno Airjet looms

Quantity: 1, Year : 2004, Width : 240 cm , Type EASYLENO ; 2 colours ; 2 weft feeders , Upper beam , Beams diameter 1000 mm.

AB46/010221/

Dornier HTVS8/J

Quantity: 12 , Year: 1995, 170 cm, Prepared for Jacquard, AT1 Control Panel
Top Beam Arrangement – 15 machines (8 machines let off motor missing), Bottom Beam – 1 per machine
Weft Color Provision – 8 , No Of ECS Units – 8 , No Of Accumulators – 8 (Savi Tec B), Feeder Stand, Drop Wires – As Fitted, No of stop motion bars – 5 , Electronic Let off & Electronic Take Up, On Loom Take Up, With Staubli CX960 4096hk capacity, 80%+ installed, JC4, year: 1993/4
Note:These looms maybe suitable for weaving Fiberglass

AD63/280121/

Dornier AWSE Looms

Quantity: 14, Year: 2×2008 – 12×2007, Width: 2100 mm, Type: 11x4S – 2x8S, Dobby: Staubli, Type: 2881, Blade: 16, Accessory: 1x warp stop motion – 10x frames.

AA10/200121/

Dornier Weaving Looms HTV8/SD

Quantity: 3, Year: 1991, Width 220 cm, 8 colours, STAUBLI Dobby 20 shafts type 2667 007.

AA10/200121/

Dornier Weaving Looms HTVS4/S

Quantity: 1, Year: 1996, Width 220 cm, 8 colours, STAUBLI Dobby 20 shafts type 2667 RSV

AG09/100121/

Dornier Looms

Quantity: 8
4x HTV S4 / SD, Year: 1994, 220cm with Staubli 2667.007 electronic dobby 16 Levers.
4x HTV S2 / E, Year: 1996, 230cm with Staubli 1627 CAM 4 Levers.
Acce. Each loom equipped with 1.5 beam (1,000mm)
2 accumulators, 4 heald frames, dropper and heddles on loom, without batching motion.
including one lot of spare parts.

AC05/060121E/P.L-A/C/

Dornier Loms HTV-6/SD

Quantity: 12
4x 220 CMS. Year 1988 STAUBLI DOBBY TYPE 2600
7x 200 CMS. Year 1993 STAUBLI DOBBY TYPE 2667
1x 200 CMS. Year. 1988 STAUBLI TYPE 2600
EQUIPPED EACH WITH:
(LOOMS 220 CMS) 18 HEALD FRAMES, (LOOMS 200 CMS) 12 HEALD FRAMES
1,5 WARP BEAMS OF 80 CMS, DIAMETER, 1,5 CLOTH ROLLERS, 3 WEFT FEEDER, 4.000 HEDDLES, 4.000 DROPPERS.

AB60/241120/

Dornier Rapier Loom HTV8/J-200

Quantity: 1, Year: 1994, Nominal working width 2000mm
Electronic jacquard STAUBLI type CX 960 , year of construction 1994, format 3072 with 2560 hooks (16 x 20 JC4 modules) installed.
Details : 7 weft colours, 6 weft feeders IRO Laser on support, bobbin creel, electronic let-off and take-up motor, GROB warp detection with 6 detection bars, 4800 droppers, 1 warp beam, display panel AT1, Take-up system of the waste selvedge, waste dustbin, batching motion PBM, Cardan axe, JC4 controller year of construction 1999.

AB60/241120/

Dornier Rapier Looms HTVS8/J-190

Quantity: 1, Year: 1997, Working width: 1900 mm, Without jacquard. format 5120 with 4864 hooks (16 x 39 JC4 modules) installed.
Details : 8 weft colours (6 complete), 4 weft feeders IRO Laser on support, bobbin creel, electronic let-off and take-up motor, GROB warp detection, 4800 droppers, 1 warp beam, display panel AT1, take-up system of the waste selvedge, waste dustbin, batching motion PBM, reed : 1231t/1520mm, 81 t/m, 4 ends/t.

AB82/171120E/P.S-A/F/AN/

DORNIER RAPIER LOOM HTVM/E

Quantity: 2, Year: 1989, EDU panel, nominal width 240 cm, weft mixer, cam motion – 8 shafts installed,, mech. warp let-off – max. warp beam flange dia. 800 mm, Loepfe thermo cutter

AB82/171120E/P.S-A/F/AN/

DORNIER RAPIER LOOM HTVM/E

Quantity: 1, Year: 1990, EDU panel, nominal width 220 cm, weft mixer, cam motion – 8 shafts installed, mech. warp let-off – max. warp beam flange dia. 800 mm,, Loepfe thermo cutter.
Accessories loom:2-4 weft feeders with electrical panel and weft creel, 4-8 heald frames, 1 warp beam, 1 cloth roller, heddles and droppers

AF57/161120E/CY-C/F/AQ/

Dornier HTVS6/S

Fiberglass Looms
Quantity: 1, Year: 1998 – width 220 cm, Dialog Panel 1
4 colours with ECS (predisposed for 8)
Electronic Warp let Off (EWL) – Electronic Cloth Take Up (ECT), Electronmic Dobby Staubli 2670 – 20 levers
Pneumatic Shaft Lock (PSL), Predisposed for beams diam. 800 mm
Rapier HS3, Warp Stop Motion Grob – 6 bars
Accessories per loom:
4 weft feeders Crono XS, 14 heald frames Grob , 1,5 beams diam. 800 mm, 2 cloth rollers, 4000 droppers and wires.
Machine is stop in the warehouse.
Machine is suitable for glass fiber with some modification that the customer can do by himself

AC23/161120E/YL-O/C/BM/

Dornier HTV8/SD Rapier Looms

Quantity: 4, Year: 1×1991 & 3×1992, WIDTH: 2100MM, 4 WEFT FEEDERS / LOOM, HEALD FRAMES: 20 IN TOTAL, WARP BEAMS 5 TOTAL, CLOTH ROLL: 5 IN TOTAL, BOTH NEW GENERATION WITH AT PANEL LIKE THE 1995 MODELS., 20/20 SHAFTS, STAUBLI ELECTRONIC DOBBY 2667
NOTE: Looms are suitable for Fiberglass
The looms were mainly weaving;‎
‎1-heavy weight fabrics from wool type fibres.‎
‎2-KEVLAR and ‎
‎3-FIBERGLASS fabric for army ‎
The looms are on the mill floor ready to produce.

AB51/131120E/YR/C/AQ/

Dornier PTS Looms

Quantity: 3, Year: 2008, W.w: 2100 mm
8 Colors, Electronic Staubli dobby 20 shafts , Device for cloth roller available on the looms
Each loom equipped with: 4 weft feeders , 12 heald frames , 1.5 warp beams, Batching and inspection outside the loom, Heddles & droppers
device for cloth rollers OR in alternative inspecting and batching machine make Ferber

AE11/081120/BY/

Complete Dornier/Sulzer/Picanol Plant With Jacquard

3x Sulzer P7250 S330 N4 SP D12

Year: 1999, 2000
Working width: 330cm
With Staubli JQ 2 X cx870, 2 x dx100 – 1408 hooks loaded Year: 2006
Accessories per machine
Weft Acummulators 8 pcs / machine
Warp Beams 2 pcs / machine
Batching Motions 1 pcs / machine
Droppers min 7000 / machine

13x Dornier HTV

Year: 3 x 1990, 3 x 1994, 7 x 1998
Working Width: 1 x 160cm, 2 x 180cm, 6 x 190cm, 4 x 200cm
With Staubli Jacquards:
10 x CX 880 1408 Hooks loaded, 1 x CS860 1344 Hooks loaded, 2 x DX 110 – 1 x 1408, 1 x 2688 Hooks loaded

2x Picanol Gammax 8 J

Year: 2006
Working width: 190cm
With Staubli DX100 Jacquards 1408 hooks loaded

AC46/061120/CM/

DORNIER HTV

‎Quantity: 1, Year: 1996, AT1, 210CM, (6 ECS), prepare for JACQUARD, Electronic let off, Electronic take ‎up, inverter, fancy beam device, 6 weft feeders, 2 warp beam, 2 cloth roll. ‎

AC46/061120/CM/

DORNIER PTS12/J

Quantity: ‎6 , Year: 2008, AT2, 200CM, 12 COLOURS(8 ECS), prepare for JACQUARD, Electronic let off, ‎Electronic take up, inverter, fancy beam device, 8 weft feeders, 2 warp beam, 2 cloth roll.‎

AC46/061120/CM/

DORNIER PTS12/J

Quantity: 8, Year: 2007 , AT2, 200CM, 2007, 12 COLOURS(8 ECS), prepare for JACQUARD, Electronic let off, ‎Electronic take up, inverter, fancy beam device, 8 weft feeders, 2 warp beam, 2 cloth roll.‎

AC46/061120/CM/

DORNIER PTS12/J

‎Quantity: 2 , Year: 2003, AT2, 220CM,12 COLOURS(6 ECS), prepare for JACQUARD, Electronic let off, ‎Electronic take up, inverter, fancy beam device, 6 weft feeders, 2 warp beam, 2 cloth roll.‎

AC46/061120/CM/

DORNIER HTV8/J

‎Quantity: 2, Year: 1994, AT1, 220CM, 8 COLOURS(6 ECS), prepare for JACQUARD, Electronic let off, ‎Electronic take up, inverter, 6 weft feeders, 2 warp beam, 2 cloth roll.‎

AC46/061120/CM/

DORNIER HTV8/J

Quantity: ‎1,Year: 1994, AT1, 220CM, 8 COLOURS(6 ECS), prepare for JACQUARD, Electronic let off, Electronic take up, inverter, 6 weft feeders, 2 warp beam, 2 cloth roll.‎