01. UNROLL TABLEFPA1995
A. TROLLY 1FPA1995
C. BUFFER TABLEFPA1995
D. TROLLY 2.FPA1995
02. BRUSH / BEATERBRUCKNER1995
03. ANTI BOWING UNITMITTER1995
07. PRESSNIP APPLICATIONCAMPEN1995
08. PREDRYERBRUCKNER1995SPLIT L= 18,5 LM6 X 300 KW UP 6 X 150 KW DOWN
A. PLEVA SYSTEMPLEVA1995TO REGLATE HUMIDITY/ECHAUST
10. SECONDARY BACKING FEEDING UNIT.FPA1995
A. FEEDING TRANSPRORTATION BELTFPA1995
11. INFRARED.SCHWANK1995RENEWEDCONSUMPUTION 32,1 M⊃3;/H
12. MAIN OVENBRUCKNER1995
A. GELLING PART.BRUCKNER1995SPLIT L = 10 LM3 X 300 KW UP, 3 X 150 KW DOWN
B. EMBOSSING UNITBRUCKNER1995REVOLVER TYPE4 ROLLERS
C. VULCANISATION PARTBRUCKNER1995SPLIT = 60 LM19 X 150 KW UP, 19 X 150 KW DOWN
D. COOLING UNITBRUCKNER1995L = 10 LM
13. PACKING UNIT, ETF.ETF1995
A. ACCUMULATOR 1 EN 2.ETF1995
C. CACCUMULATOR 3.ETF1995
D. ROLL-UP WINDER, COMPLETE AUTOMATICETF1995
very good condition.
Line is very big:
6 chambers split prédryer
3 chamers split gelling part main oven
19 chambers split main oven
Line can be shortened by reducing number of Chambers.
NOTE: This line is the best (strong, maintenance good, etc) but is much to big.(can run 30m/min…)
But it can be shortened. and has complete automatic packing, also for grass. ( so short-cuts can be done on the line.)
Line is high quality and maintained professionally.
NOTE: Line is high quality and maintained professionally.
WW: between 3.2 m & 5.2 m
Length of the line 70m
All mechanical & electrical drawings are available.
* item 10: dot-printing unit is no more in line, but available (normally no need)
* item 16: electrical perforator (to make holes in the artificial grass) is no more there (sold), but new one can be installed.
1- sewing machine DOHLE
2- unroll for carpet
3- J-box with left/right guiding
4- pré-steamer, steam heated
5-heated drum, steam heated.
8- latex applicator
9- unroll for secondary backing
10-J-box with left/right guiding
11- space for dot-printing unit. no more in-line, available
13- main-oven, 8 chambers, SPLIT, 16 burners, gas heated
14- cooling, 2 sections
16- space for perforator, no more available
17- accumulator, capacity +-100 lm
18- inspection zone
19- length cutter
20- cross cutter
21- roll-up with tube feeding.
22- foam mixer MST , all electrical & mechanical drawings
Note: Speed is between 7m/min & 13 m/min, depending on quality.
Line needs compressed air.
Line needs small steam boiler for pre-steamer & heated drum, but can be started without using this.
Pre-steamer is needed for cut-pile qualities, heated drum is for flattening (ironing) backside of the carpet (to use less precoat): is only working for PP yarn.
Quantity: 1, Year: 1998, MATTHYS feeding, Jbox and Padder, Max Width : 5.200 mm, GAZ HEATED ; 3 burners, Special iron Belt to drive Tufted carpet through the stenter. Delivery on batching device.