AD63/290126/
MEZZERA Open Width Washing Line after Printing Fabrics
Quantity: 1, Year: 2015 , width 3200 mm, Model: ESSETEX, Working width: 3.200 mm, Number of washing tanks: 3, Number of drums: 6, Open width washing line after printing for fabrics, Delivery in plate
AD63/290126/
Babcock Chain Mercerizing Line
Quantity: 1, Year: 1999, with 12 tanks , working width 1800 mm, Manufacturer of the washing tanks: BABCOCK
Manufacturer of the chain mercerizing line: COMERIO
Useful working width: 1800 mm., Fabric entry from big roll with axial unwinding, Entry with J-box for fabric accumulation entry
N. 3 washing-preparation tanks for soda treatment, but they can also work as a simple independent washing unit
Overhead connection system between the washing line and the mercerizing line, with connection arms and passage cylinders
N. 4 impregnation tanks
N. 17 large diameter perforated cylinders for the oxidation of the fabric in air
N. 1 chain mercerizing unit, length 21 meters complete with alkaline showers for greater stabilization of the fabric
N. 5 washing and rinsing tanks, the last of which is equipped with an automatic chemical dosing system
Fabric exit in a big roll with tangential winding, Chiller
No. 2 filters to remove impurities from the soda, mainly fluff, Filter-press for the exhausted soda
Water system on board the machine, Steam system on board the machine, Electrical and pneumatic system on board the machine
AD63/290126/
Kuesters Bleaching Line
Year: 1991
7 tanks with steamer
Roller width: entry 4.000 mm, delivery 3.800 mm.
Useful working width: entry 3.800 mm, delivery 3.600 mm.
Production speed: up to 120 m/min.
Entry fabric from big batch with E+L selvedge widener mod. KF 2020 L
No. 1 washing tank model Compacta-D with fabric content 30 mt., useful working width 3.800 mm.
No. 1 squeezer mangle with two cylinders, type 225.23, useful working width 3.800 mm.
No. 1 washing tank model Maander with fabric content 15 m, useful working width 3.800 mm.
No. 1 cooling tank, useful working width 3.800 mm.
No. 1 high-performance two cylinders strong squeezer mangle with floating cylinder, type 222.56, useful working width 3.600 mm.
No. 1 impregnation tank to saturate the fabric, useful working width 3.600 mm.
No. 1 squeezer mangle with two cylinders, type 225.23, useful working width 3.600 mm.
No. 1 roller-bed vaporizer type 242.52, useful width 3.600 mm., with the following fabric loading capacities: 84 linear meters of cylinder fabric threading and 1.900 linear meters of fabric on the roller-bed. Date calculated with 150 gr./m2 fabrics.
No. 1 washing tank type 235.29 applied to the vaporizer, useful width 3.600 mm.
No. 1 squeezer mangle with two cylinders, type 225.23, useful working width 3.600 mm.
No. 1 washing tank model Compacta-D, useful working width 3.600 mm., fabric content 20 mt.
No. 1 squeezer mangle with two cylinders, type 225.23, useful working width 3.600 mm.
No. 1 washing tank model Maander, useful working width 3.600 mm., fabric content 15 m.
No. 1 squeezer mangle with two cylinders, type 225.23, useful working width 3.600 mm.
No. 1 washing tank model Maander, useful working width 3.600 mm.
No. 1 cooling tank, useful width 3.600 mm.
No. 1 high-performance two cylinders strong squeezer mangle with floating cylinder, type 222.56, useful working width 3.600 mm.
Fabric delivery in big roll with tangential winding
Electrical cabinet
Updated control pulpit with new screens
No. 2 heat recovery units.
AD63/290126/
Babcock Bleaching Line
Quantity: 1, Year: 1995, n. 7 tanks, steamer, roller-bed, working width 1800 mm, Useful working width: 1800 mm., Fabric entry from big roll with axial unwinding, J-box for fabric accumulation, N. 2 preparation tanks, N. 1 saturator tank model “ECONSAT”
N. 1 rollers steamer with about 60 meters of fabric content + roller-bed with up to 250 mt. of fabric content
N. 3 washing and rinsing tanks, N. 1 final neutralization tank for acid or for optical white
J-box for fabric accumulation, Fabric exit in big roll with tangential winding, Automatic dosing system for chemical products, Water system on board the machine, Steam system on board the machine, Electrical and pneumatic system on board the machine
AD63/290126/
KMT (now SALVADE) Calender For Transfer Printing on Fabrics
Quantity: 1, Year: 2002, Manufacturer: KMT (now SALVADÉ), Model: COMBI 620 SSA
Cylinder Diameter: 600 mm.Useful Working width: 1.650 mm.Transfer Paper width: 1.650 mm.Transfer Paper Diameter: Up to 280 mm.
Protective Paper width: 1.800 mm.Protective Paper Diameter: 300 mm.Max. Speed: Up to 15 m/min.
Cylinder heating: electric, bilateral dogal centering device
NEW felt conveyor belt installed a few months ago
Max. Installed Power: 45 Kw.Delivery in roll
Suitable for woven and knitting fabrics and for VERY LIGHT KNITTING fabrics.
AD63/290126/
Ferraro Continuous Washing Line
Year: 2018, Open width for after printing fabrics, Useful working width: 2.000 mm., No. 8 tanks: 7 for washing and rinsing + 1 for relaxation, Self-cleaning filters on each tank, Entry and exit of the plaited fabric, Electrical cabinet, Machine in excellent condition, practically like new and still working. Suitable for woven and knitting fabrics.
AD63/290126/
Aigle Continuous Flocking Line, with Reggiani Printing Roller and Stork Oven
Quantity: 1, Year: 1992, Working width: 1.900 mm.
Composition:
REGGIANI printing roller, working width 1.980 mm, with washing system with water and doctor blades.
Nomex carpet for transport the fabric
Doctor blades for printing roller with feeding pump
N. 2 flocking units AIGLE working width 1.900 mm
Glitter’s spreader unit working width 1.900 mm
N. 2 suction unites for flock fibers
Brushing unit
STORK oven, gas heated, with N. 3 section. The oven can work with N. 3 passage of about 25 meters, or with single passage of about 9 meters.
AD63/290126E/RIC-AO/F/AQ/
OMAS Combined Milling And Scouring Machine NEW For Rope Fabrics
Year: 2023 – the machine is new yet to be installed, Brand: OMAS (Italy), N. 4 channels, Model: NOBILTEX CF4, Number of channels: 4 independently adjustable, Milling cylinders with special rubber elements, Safety device for any nodes, Safety device to prevent slipping of the fabrics, Independent working pressure regulation for each channel, Product distribution system with independent liter-counter for each channel, Independent internal bath replenishment for each channela, Independent main tank drainage system for each channel, Rear tank for the preparation of the bath with inlet pump, Main motorization with 75 Kw servo-ventilated vector motor with ABB inverter, Machine is in prompt delivery.
AD63/290126/
Salvade Felt Calender
Quantity: 1, Year: 2013, Width 3100 mm, For transfer printing, lamination, thermo bonding, hot stamping foil metal for fabrics and PVC. Model: COMBI 633 TFKX CR, Roller width 3.300 mm, Cylinder diameter 600 mm, Fabric infeed with three unwinders, Currently used to produce PVC truck tarps, the three integrated unwinders are used for: PVC film (outside), polyester fabric (inside), and PVC film (outside). K3 pressure cylinder (3 tons), Cooling water cylinder water feeded, Roll fabric outfeed with selvedge cutter, The machine is equipped with silicon felt, but it can be replaced with felt. The machine is in perfect condition, it has been worked very little and is very well maintained, it is practically like new.
AD63/290126E/OA-T/F/AQ/
Salvade Calender for Transfer Printing on Fabrics
Quantity: 1, Year: 2018, With felt, for combing and lamination., Model: COMBI 1020, Working width: 1.800 mm, Cylinder diameter: 1000 mm., Cylinder heating: electric, Fabric entry from roll, small roll and layer, Towing group with input J-box, Spreader and dogal centering device, Additional dogal centering device positioned at the fabric entrance into the machine, Delivery in roll.
Machine status: dismantled, Delivery: Prompt, Machine condition: excellent
AD63/290126/
Mezzera after Printing Washing
Quantity: 1, Year: 2014, Model: CONCORD, After-print washing for fabrics in rope form for knitting fabrics and woven fabrics. 12 fabric rope washing channels, Automatic chemical dosing system, Electrical cabinet, Rope-opener and squeezer mangle.
AD63/290126E/AYY-AI/F/AQ/
Reggiani Single Layer Stenter Line
Quantity: 1, Year: 2001, Model: TERMA 320/15 GAS, Working width: 3.200 mm, Number of chambers 8, Heating system: gas
Entry fabric from big roller
Fabric guiding device, manufacturer ERHARDT+LEIMER model KF 2020
BETA padder with 3 cylinders: rubber – chromed – rubber
BABCOCK padder with 2 rollers type 5805
Weft-straightener manufacturer MAHLO, with optical heads and with tension control group
Single layer stenter machine, Horizontal chain with pins and clips
Length of the entry arms: 4.000 mm.
Cooling device at the exit of the oven
MAHLO reading bridge with optical heads to correct eventual distortion of the fabric weft, that could be generated inside the oven
Delivery fabric in big batch device with fabric centering device through ERHARDT+LEIMER dogal centering device
Exhaust fan for the ejection of exhausted fumes
The stenter machine will be supply complete with the gas system on board the machine
Machine is currently in running. Machine shipped in N. 7 containers 40′ HC
AD92/260126/
Rotary Printing Machine Reggiani
Quantity: 1, Year: 2011, model Unica, w.w. 2.0 m, 12 colours, gas dryer with 2 chambers, 3 passages
AA30/220126/AX/
Bruckner ‘Blackout’ Coating Line
Year 1993, 3200mm
EUR 340,000 invested in 2022 for new gas burners,controls,chain and guides.
Hansa Foam Generating Mixer with Turbo Wash – New 2022
A frame feed
12 roller Accumulator
WB Processing Coating head- Knife over roller
Esch – Electrosatic Flock Applicator with 5 hoppers for Rayon
Bruckner 6 bay gas stenter
12 New Gas Burners, controls, chains and guides installed 2022
Web Processing Calendar 2 stainless steel roller.
12 roller Accumulator
Beater Bar with Esch flock extraction
Batching to A frame
AA30/220126/AX/
Bruckner Coating Line
Year: 2002, 2000mm
The machine was installed and commissioned in 2023 with over EUR 460,000 invested in 2023 including refurbished burners, new electrical controls, chain guides etc.
Tanks for chemical mixing
Campen Foam Generating Mixer
A frame feed
9 roller Accumulator
Beta Padder 3 bowl (FLC 3TAV 2100)
Mahlo Weft Straigtener (RFMC-10A)
Web Processing Coating Blade -Knife over air
Bruckner 8 Bay Gas Stenter
Pin only, electrical upgrade and new E&L guiders
16 Refurbished Gas Burners and controls
Cooling Zone
Batching to A frame
AA30/220126/AX/
Fabric Coating and Finishing Factory 3200mm and 2200m
Brugman Bleaching range 3200mm
Bruckner Coating Stenter 3200mm
Bruckner Coating Stenter 2200mm
Bruckner Stenter 3200mm
Bruckner Stenter 1800mm
Montfort Stenter 2200mm
Ramish 2 Bowl 1600mm
Kusters 2 Bowl 3200mm
Villars Powder Dot Coating
Caratsch Scatter Coating / Laminating
Saladin Powder Coating
Mario Crosta 2 x 36 end Raising
Vald Henricksen Jigs
Calotor Inspection 3200/2000mm
AA30/220126/AX/
Mario Crosta Fabric Raising Duplex
2 off 36 roller comprising:
A frame to feed to
Mario Costa 36 roller machine, Year 1999, Tension Unit
Mario Crosta 36 Roller machine, Year 1999, Batching to A frame
AA30/220126/AX/
Kusters Calender
Kusters 2 bowl Calender 3200mm ( Gas ), A frame feed, 1 steel roller dia. 400mm, 1 Plastic roller dia. 500mm.
AA30/220126/AX/
Ramish Kleinwefers Calendar
Ramish Kleinwefers 2 bowl Calendar (Shreiner) A frame feed, Nipco -1 steel roller dia. 300mm, 1 Racolan roller dia. 500mm, 50 tons pressure, Batching to A frame.
AC93/190126/
Osthoff Singeing & Impregnation Line
Quantity: 1, Year: 1998, Model: U 97, Rollers width: 2200 mm. Useful working width: 2000 mm., Fabric entry from big roll, Brushing machine with suction, Singeing machine with two burners, N.B. the bricks were changed a few months before closing and are as good as new, Beater machine with suction, Impregnation tank for desizing and/or bleaching in pad-batch, Fabric exit a big roll with tangential winding.
AB46/140126/
Babcock Wash/Scour Range
Quantity: 1, Year: 2001, Entry and exit rollers are 4.6m width
With 4 wash boxes (wash box 1 has 15 rolls, wash box 2 has 17 rolls, wash box 3 has 17 rolls, wash box 4 has 16 rolls)
Barco monitoring system
Menzel accumulator model 110PS01 year 2015 at entry, fed from A-frame with automatic unwinder, Menzel compensator with multiple rolls, potable water utilized in heat transfer process and dispensed to sewer, steam condensed and returned to condensate tank for reuse in boiler.
AC93/070126/
Benninger Bleaching
QUANTITY: 1, YEAR 2003, ROLLER WIDTH 2.000 MM, ENTRANCE WITH J-SCRAY ACCUMULATOR, 2 IMPREGNATION TANKS, BENNINGER IMPACTA CHEMICAL DOSING UNIT, STEAMER, TIGHT STRAND, AND ROLLER BED PASSAGE, 3 TANKS BENNINGER EXTRACTA WASH RANGE, J-SCRAY ACCUMULATOR, EXIT BY FOLDER AND A-FRAME BATCHER.
AB60/060126/
Ramisch Guarneri Calender
Quantity: 1, Year: 2013, Type RGK 390.3000, NIPCO L, Working width 2800 mm, 3 rolls (steel – Nipco L – Cotton ), electric heating up to 210ºC, pressure 50 to 300 N/mm, exit on A-frame.
AB60/060126/
KLEINEWEFERS Calander Line
Quantity: 1, Year: 1996, Type: KTM 2400, With following details in -> out : Corino Type CMP+TRANO, 380V 50Hz / Electronic metal and seam detector Erhardt+Leimer type SGI030 / walking floor / Calander KTM (10-100m/min, 50-280N/mm, electric hot water heating): Teflon Cylinder Sulzer Escher Wyss (NIPCO WALZE) Type TED 500 PAV 2400 , year of construction 1996 working width 2400mm + Inox Cylinder KTM Type RKK260, year of construction 1999 / rubber guide Roller on hydraulic levers; Control Unit Erhardt+Leimer year of construction 1996 230V/400V 50 Hz; Electrical Box with Touchscreen Siemens Simatec HMI; Pressure Unit 1 KTM , year of construction 1999 + Pressure Unit 2 KTM Type 90766 , year of construction 1999; Coolant Unit Vandeputte Type Prestcold APZ-45KM8 with compressor, ventilator and water pump; Manual + Electrical Scheme; Nice condition !
AE56/070126D/AYL-AI/F/BA/
Biancalani Airo 24 Soften Machine
Quantity: 1, Year: 2023, Width 200 cm, Gas heated, Brand new and unused.
AE56/070126D/ATI-AI/F/
Santex Open Width Dryer
Quantity: 1, Year: 2017, Working Width 240cm, 6 chamber, Steam/oil heated, For Knitting Fabric.
AA30/060126/AX/
Bruckner Clip Stenter
Quantity: 1, Year: 1998, 1800mm, A frame feed, Hall & Boyden 2 roller Padder, 8 Drying cylinders, Bianco weft straigtener (new controls 2023) Radizzatrama Bruckner 6 bay gas stenter, Clip only, Phoenix burner control panel, 2 Burners not working require service, Batching to A frame.
AA30/060126/AX/
Brugman Continuous Rope Fabric Bleaching
Year: 1990
Range 3200mm
Stainless Steel
A Frame feed 3200mm
Osthoff-Senge Brushing and Singeing 3200mm Model PK86 no 624
With brushing 3200mm and vacuum unit
De-Sizing wash box 3200mm (Brugman)
2 x Stainless Steel Mixing tanks for enzymatic desize chemicals
Rope feed to:
4 off Greige Pit with traversing carriage
Wash tank no1. (All wash tanks 1200mm width for rope fabric)
Caustic Saturation
J box steamer no 1.
Wash tank no 2.
Wash tank no 3.
Sodium Hypochlorite Saturation unit
J Box no 2. for dwell (can be used with steam)
Wash tank no 4.
Peroxide saturation unit
J Box Steamer no 3. for final bleach process
Wash tank no 5.
Wash Tank no 6.
Pull Up unit with traversing carriage creel
5 off rope fabric storage pits
Croft pull up unit to:
Hall & Boyden Cloth Opener to 3200mm full width
Hall Boyden Squeeze Roller 3200mm
Drying Cylinders (25 off) 3200mm
Hall Boyden Batching unit 3200mm
8 off Stainless Steel chemical mixing tanks on new Stainless Steel Walkway
Notes:
The line with suitable guiders can be used for both single width and 3200mm fabric.
Greige Fabric Brushing and Knocking 3200mm comprising:
Bailing Conveyor – Length Entry track – 7.25mtrs – Coveyor belt 9.5mtrs – Unpacking table 80cm – Belt width 134cm
Brushing/Knocking unit 3200mm
Fabric openers for wide width fabric and Bianco internal fabric guiding unit. A frame batching Batching frame 3200mm.
AE56/311225/
Mario Crosta Shearing
Quantity: 1, Year: 2007, width 360cm, Double blade, Blade height 19.8mm, Used for towels,bedding and long cut velvet, Can test running.
AB72/281225/
Osthoff Singeing Range
QUANTITY: 1
YEAR: 2001
WW 1850 MM
ROLLER WIDTH MM.2000 (WORKING WIDTHMM.1850 )
MACHINE HAS HAD THE BURNERS OVERHAULED WITH BRAND NEW FIRE BRICS 2 YEARS AGO SO THE HEART OF THEMACHINE IS LIKE 2 YEARS OLD.
CONSISTING OF:
ENTRY FRAME WITH GUIDING BRUSHING-BEATING UNIT MADE IN STAINLESS STEEL
OSTHOFF SINGEING – MODEL U 97 BURNERS TYPE DOUBLE-JET
4 WATER COOLED ROLLERS WITH AUTOMATIC SELF-BURNER TURNING DEVICE ON E STOP OF MACHINE. THE BURNERS HAVE THREE WORKING POSITIONS:
WITH FOLLOWING ADJUSTABLE PARAMETERS:- FLAME HIGHT – FLAME WIDTH – FLAME INTENSITY.
N.1 OSTHOFF BRUSHING / BEATING UNIT –MODEL VP 97 – WITH
N. 02 BRUSHES CYLINDERS AND
N. 02 OSTHOFF SINGE UNIT WITH 2BURNERS TYPE U 97 WITH FLAME QUENCH SYSTEM
N. 02 BEATERS CYLINDER- WITH SUCTION DEVICE
N.1 OSTHOFF EXIT WITH PLAITER UNIT DRIVEN BY A/C MOTOR
N.1 MAIN CONTROL PANEL WITH AC FREQUENCY INVERTERS
N.1 OPERATORS REMOTE STATION WITH ALL CONTROL PARAMETERS.
IN PERFECT WORKING CONDITION.
AE56/251225D/AOS-AY/F/BA/
Bruckner Stenter
Quantity: 1, Year: 2010, Germany origin, Roller width 240cm 8chamber, Oil Heated, 1 Padder, Pin Chain, With Heat Recovery System, Running Condition.
AC93/231225E/PA-T/F/
MONFORTS SANFOR MODEL MONFORTEX BJ
Quantity: 1, Year: 1994, WORKING WIDTH: 2.400 MM, ROLLER WIDTH: 2.600 MM, RUBBER WIDTH: 2.525 MM
EQUIPPED WITH:- STEAMING CYLINDE- WEKO SPRAY- PUMP STENTER CLIP HORIZONTAL CHAIN- RUBBER BELT UNIT- PALMER DIAMETER 1.500 MM, FELT AND DRYING CYLINDER- EXIT WITH COOLING CYLINDER, ONTO FOLDER AND A-FRAME BATCHER
AG96/221225D/ACC-AL/F/AG/
Monforst Sanforizing
Quantity: 1, Year: 1988, Made in Germany, WW 1900 mm. Electronic upgraded with all motors with individual inverters. and electrical systems of the machine all upgraded. WEKO humidifier, small mini stenter entrance, Palmer with Dolphus Muller, cooler cylinder, folding exit.
Electricity 220/380v or 440. Stopped on Mill Floor. Very High quality Machine.
We recommend to change the Sanfor Belt during installation. USD 10,000 is a Daytex best quality new Sanfor Belt. We can supply licensed professional technician for installation, start up against extra cost.
AG96/221225D/AOP-CI/F/AG/
Tepa Stenter Sanforizing
Quantity: 1, Year: 2008, 2000mm, Very little used, stopped since 2019 with weko system. We recommend to change the Sanfor Belt during installation. USD 10,000 is a Daytex best quality new Sanfor Belt. We can supply licensed professional technician for installation, start up against extra cost. Very High quality Machine.
AA30/181225/AX/
Villars Powder Coating
Villars Powder Coating PPM94 with Chiller,Jenko Powder feed
Engraved roller to apply dot coating
Infra red melt process
Cavitex 2 roller Calibrating Calendar
Hall & Boyden Shrinking roll
Knock brush and extraction unit
NDC Coating Level Scanner
Batching to A frame
Extraction unit
Heizemat Oil Boiler
AA30/181225/AX/
Caratsch Scatter Coating with Laminating Line
1800mm, A frame feed, Villars Scatter coater, Infra red pre heat, Caratasch infra red melt process, Calendar rolls stainless steel with water cooling, 2 Cooling cylinders, Batchng to A frame, Secondary A frame Laminating feed, 3 stage processing for coating both sides and lamination, Oil Boiler.
AA02/171225E/RTL-AL/M/
Bruckner Tenter Frame
Quantity: 1, Year: 2016, Model V/N SP-22/08, 2.2 Meters Working Width, 08 Zone, Vertical Chain Return, Gas Powered, Bruckner Power Pad, Pleva SP-1 Weft Straightener.
AI82/101225E/RY-Y/M/BX/
Lafer Shearing
Quantity: 1, Year: 2015 but Only 8’735 working hours, Model CMI200, Number of Shearing heads: 2 heads per machine., Working width: 200 cm, Status: Stopped since Oct 2025 but still in its working position and connected to power. So it can run at any time for inspection and trials.
AB51/101225E/AIP-P/M/AQ/
Lafer Shearing
Quantity: 2, Year: 2008, Model CMI 100, Table width 2200 mm, Coupled to work Front/Front side of the fabric, In very nice conditions, few working hours.
AE56/091225/
Monfongs Stenter
Quantity: 1, Year: 2019, Width 240cm, 9 chamber, Gas heated, Center padder, Horizontal chain, Running conditions.
AA10/051225/
Guarneri Embossing Calender
Quantity: 1, mod.KREWSAG, for Chintz & embossing, embossing Cylinder width 1600 mm, diathermic oil heating, pressure 25.000 kg, 3 Cylinders, exit LA MECCANICA Rolling up System.
AA10/051225/
Lamperti Raising
Quantity: 1, Year: 1995, mod. GHM/L93, w.width 2850 mm, 2 drums 24+24 cylinders, suitable for tubular knitting fabric.
AA10/051225/
Lamperti Sueding
Quantity: 1, Year: 2001, Model SMB, Brushes width 2400 mm. 3 vertical brushes, input from trolley, output folding system, without suction.
*AB52/021225/
Babcock Stenter with Coating Head
Quantity: 1, Year: 1997, 240 cm working width, Flat stenter with enduction head Jacob Weib & Söhne – Type 5001-3500, Machines in operation.
AD26/030625/
Arioli Steamer + Small Arioli for Samples
Quantity: 1, Year 2005, Width: 3200 mm, Type: VAPO2003, Capacity: 200 m, Speed: 15 m/min.
AB76/281125E/LC-L/F/BY/
Tumbler BIANCALANI AIRO DUE S
Quantity: 1, Year: 2001, Type AS2XGAE, Gas heating, 2 ropes, 2chambers, Capacity: 300 kg, Max temp. up to 200oC, Rollers for dragging fabrics, Processed fabrics: knit fabrics polyester, cotton, cotton with Lycra, For softening, various typed of knit fabrics, Machine in very good technical condition, running.
AB52/170125/
Finishing Plant for Worsted and Woollen
1x Singeing machine from PAREX MATHER ; Type: SERIES 5000 MARKS SINGEING MACHINE; Year: 1997; with pre-brushing station; Flamming station; impregnation padder; Dawn suction system; Cabinet with programmable controller.
1x Solvent Washer (Solvent Machine) from SPEROTTO RIMAR NOVA 220/1000; Year: 1996; with CORINO fabric feeding; Solvent washing system; Drum dryer; Folding system; Electric cabinet; Solvent recovering system ; Programmable controller.
1x Continious WASHING machine from CIMI; CORINO feeding; 04 Washing Compartments; Width 2000 mm; Capacity: 133 to 220 litres; LAVANOVA product tanks; SUPERFIX rinse compartment; THERMOMECANICCA RAIMOND 8-drum steam drying system; Folder delivery; 2 Electrical control cabinets with automaton.
1x Washing-Fulling machine TURBO MAT 2C 4M; Year: 1991; Capacity: 350 Kg; Width: 1,000 mm; With fulling system for wool; Washing system; Balance wheel; Compressed air, Steam water regulation system; Pressure regulation switch; Electrical cabinets.
1x quick washer from MAT; Type SUPER VELOX N°1 model; Year: 1993; Washing system; Electrical control cabinet; Programmable automaton.
2x Washers / Fullers from HEMMER; Capacity: 150 Kg; Capacity: 100 Kg; With pressure roller; 01 Fulling system; Water, air, steam; Timer regulation system.
2x washing / Fullers from ZONCO; Model: NEW COM 600 BIG; Year: 1987; with fulling system; Washing system; Balancer; Compressed air, water and steam regulation system; Timer regulation system, pressure switch; Electrical cabinet.
1x Washing machine from BIANCALANI TM; Type : AIRO 1000; 2 ropes ; Year: 1992
1x BIANCO Unstwisting machine (LINEA APRICORDA); Width : 2200 mm ; Year: 1992; With centering device.
1x NESI AND PUGI end-to-end selvedge seam machine; Width: 2000 mm; With Jockey-roller feeding and widener; Edge guide; Folder; Sewing machine; Output balancer.
1x Impregnation Padder from MCS ; Year: 1990; Width: 1800 mm ; With ERHARDT LEIMER entry system; Impregnation tank; 2 automatic filling tanks of 1000 liters each; Winding system; Electrical control and protection cabinet.
2x ELCU fabric sewing machines; Type: AA 2000 ; Year: 2007.
2x Multi Layers STENTER FRAMES from BRUCKNER, Width: 2400 mm ; Year: 2003/2005.
Each Stenter with 6 compartments; Thermic Oil Heating; BETA impregnation padders with 3 cylinders; MAHLO Weft straightener; pin and clip chain ; Folding delivery.
1x Raising and napping machine from LAMPERTI; Width: 1800 mm; type: GA/ L80; Year: 1986
1x Raising and napping machine from LAMPERTI; Width: 1800 mm; Type: GB048N/L89; Year: 1992 ; with 36 workers; Système de tondage à scie ; Automatic suction system ; Automate programmable.
1x Emerising machine from LAFER (TEXEN FACTORY AUTOMATION), Type: CARBONIUM ULTRASOFTY; Power: 25 KA; Width: 2000 mm ; 4 brush (peach effect), Year: 2011.
1x Shearing line from LAFER; Type: CMI2; Width: 2200 mm ; Year: 1997; composed with 3 Shearing machines of 2 cylinders each; Programmable controller; Suction system ; folding delivery.
1x Decatizer from BIELLA SHRUK PROCESS (KD); Type: KD SUPREMA 90 6R with Decatizing autoclave Type: MI 20367-94; Width: 1600 mm ; Year: 1994; Capacity: 6180 liters; Pressure: 4 Bars.
1x Decatizer from TMT type PF 1293 MULTI PROGRAM; Width: 1600 mm ; with decatizing autoclave; Year: 1996 and completely refurbished in 2021 ; Steam heating ; pressure : 4 bars.
1x Sanfor from SPEROTTO RIMAR / SANTEX GROUP COM; type: FLEXA COMPACT 180; Width: 1600 mm ; Year: 2005; With electrical cabinet and programmable controller; Jbox Feeding; Roller fabric tension system; Compression system; Calendering zone; Cooling system; Folder.
1x Decatising machine from SPEROTTO RIMAR ; Type: DECOFAST 3,5 ; Width: 1800 mm ; ULTRAFINISH ; Year: 2016 ; Power: 55 kW; With roller Feeding; Roller fabric tension system; SPEROTTO RIMAR SIMATIC-HMI programmable controller and SIEMENS screen; 2-roller decatising system; Electrical control cabinet.
Others :
1x ZANCO Fuller with 4 ropes (lavensel) Type : NEWCOM 600 BIG. Year : 1981.
2x THIES dyeing sampling machines
1x Untwisting machine from CORINO
1x J BOX inspection table with unbatcher and folder.
11x Overlock sewing machines and simple sewing machines
1x THIMONNIER sewing machine; Type: SAC-UP; Year: 2007.
3x Inspecting tables with Inverters; Mechanical counters
300 Foldable trolleys (Easles)
… and various accessories …
AC93/251125/
Bruckner Stenter
Quantity: 1, Year : 1997, Roller Width : 2000 mm, Bays : 8, Type of Chain : Horizontal, Type of Heating : Gas, Used textile machine : Yes.