AJ04/090226E/AT.L-A.L/F/

Jigger MEZZERA Italy

Quantity: 1, Year: 1990, model 724320081- A
Old Mezzera jiggers are large, industrial textile machines used for dyeing and
finishing fabrics under high temperature and pressure, featuring two independent
electric motor drives, variable speed control with encoders for accuracy, PLC-based
tension control, sophisticated liquor circulation and heating systems, and specialized
equalizer mechanisms for handling delicate fabrics. While modern EFI Mezzera
jiggers are digitally controlled with AC vectorial inverters and load cells for real-time
tension compensation, older models might have used manual, hydraulic, or
mechanical drives and less advanced control systems.
Basin capacity approx. 2500L, Roll surface width 3500 mm, Max fabric width approx. 3200mm

AJ04/090226E/AT.L-A.L/F/

Jigger Mezzera Italy

Quantity: 1, Year : 1990, model 724320081 - B
Old Mezzera jiggers are large, industrial textile machines used for dyeing and
finishing fabrics under high temperature and pressure, featuring two independent
electric motor drives, variable speed control with encoders for accuracy, PLC-based
tension control, sophisticated liquor circulation and heating systems, and specialized
equalizer mechanisms for handling delicate fabrics. While modern EFI Mezzera
jiggers are digitally controlled with AC vectorial inverters and load cells for real-time
tension compensation, older models might have used manual, hydraulic, or
mechanical drives and less advanced control systems.
Basin capacity approx. 2500L, Roll surface width 3500 mm, Max fabric width approx. 3200mm

AJ04/090226E/YS.L-Y.L/F/

Jigger MCS Italy

Quantity: 1, Year: 1991, model Mid jigger 2716, working width 270, Machine fully functional.

AJ04/090226E/PC.L-P.L/F/

Jigger HENRIKSEN

Quantity: 1, Year: 1998, upgrade 2016
model VH futura 1000/2600
Model Henriksen Futura Jigger (e.g., 12/2200; likely 1200/2600 variant)
Batch Diameter Up to 1200 mm
Roller/Working Width: Approximately 2600 mm (for the 1200/2600 designation)
Controller SEDOMAT 2600
Process Control: Precise regulation of temperature, chemicals, liquor ratio, timing
Tension & Fabric Care: Proprietary system minimizing creases, controlling shrinkage/elongation
Washing System: Efficient low-bath continuous washing with minimal water
Speed: Up to 150 m/min, capable of handling diverse fabric types efficiently

AJ04/090226E/OY.P-T.P/F/

Jigger Henriksen

Quantity: 1, Year 2014 , Model : VH jigger 1000/3400, Process Control: Precise regulation of temperature, chemicals, liquor ratio, timing, Efficient low-bath continuous washing with minimal water, Working width approximately 3200mm, fabric length, max. (with a fabric thickness >= 0,3mm): 2.700m, working speed: up to 150m/min, roller width: 3.400 mm, fabric width: 3200mm, speed max 120 m/ min, heating steam direct/ indirect, steam consumption : 292 kg/ h 6 bar, control system Sedomat 2500

AJ04/090226E/SI.L-P/F/

Jigger THIES

Quantity: 1, Year: 2015, model NType Jigger (2300 / 2800) , Germany
The Thies NT Type jigger is engineered for dyeing a range of synthetic and blended
fabrics—especially wide-open, crease-prone materials—at atmospheric (normal)
temperatures (up to around 98 °C) without applying pressure. Key features include:
• Full stainless steel construction: Durable and corrosion-resistant.
• A-frame drive (frequency-controlled) for fabric loading and unloading at preset
winding tension.
• Fabric length controller that calculates and maintains both speed and tension
throughout the process
• Weft device that allows lateral coiling of fabric during loading to ensure even
distribution.
• High-efficiency variable-frequency motors that directly drive both main rollers for
smooth, precise motion.
• Efficient dye tank design, delivering uniform results at low liquor ratios (economical
dye usage) .
• Advanced automatic control using industrial PCs, PLCs, and fabric monitoring
systems to maintain optimal parameters and flexibility for modern fiber blends.
The Thies NT Type jigger (2300/2800) is a top-tier, atmospheric-temperature, wide-fabric
dyeing machine that brings flexibility, precision, and cost-efficiency to textile finishing:
• Max Fabric Width: Up to 2850 mm (model 2300), up to 4100 mm (model 2800).
• Controls: Precise speed and tension control via modern automation systems (PLC,
fabric monitoring).
• Build: Robust stainless steel, ensuring durability.
• Performance: Uniform results with low dye usage and excellent fabric quality
(creaseless, evenly dyed).
Year of construction: 2015
• roller width: 3.000 mm
• fabric width: 2.800 mm
• fabric length, max. (with a fabric thickness >= 0,3mm): 3.177m

AJ04/090226E/ASP-AP/F/

Jigger MSC Italy

Quantity: 1, Year: 2021, model MAXI JIGGER 98° / ( 1 MXJ.98-34 ) Low
Temperature Open Width Dyeing Machine
Low Temperature Open Width Dyeing Machine
MACHINE DESCRIPTION
Low-temperature open-width scouring, bleaching, dyeing machine: all parts of the machine
that come into contact with the fabric are
made from AISI 316/AISI 316 L stainless steel.
The dyeing unit consists of a self-supporting frame that provides the machine with utmost
stability under conditions of full load and
maximum speed. The Jigger, in all its parts, is contained inside the frame.
The jigger is equipped with an inspection hatch on both sides of the machine, internal lighting
and double door with automatic
pneumatic opening
The machine is designed to work with a maximum charge bath ratio of 1:2. The following
components are assembled inside the
machine: winding rollers, idle rollers and curved bar, for perfect fabric arrangement and
tension.
In addition to the usual solidity and reliability guaranteed by MCS products, these product
offer technological developments promoting
• Machine main tank entirely made of stainless steel, self-supporting
• Base made of painted carbon steel
• Main rollers in stainless steel 316L Ø320 mm(Ø400 beyond table 2600) with
• Brushless drive
• Selvedge alignment system on 1 main roller
• Double tank bottom roller Ø139.7 mm assembled on oversize bushes.
• Double internal spring rocker arm with roller Ø88.9 and curved bar.
• Bath recirculation pump with suction filter
• Shell and tube heat exchanger with modulating valve heating on/off cooling
• Machine filling managed by litres counter
• HEW spray wash system with bath to be disposed of, supplied by the mains and
selectable water. Possibility to manage the spray temperature.
• Product addition tank with capacity of 200 l (300 l beyond table 2600) with indirect
coil heating, mixer, recirculation with machine and continuous level control
• Product introduction system managed by PLC

AJ04/090226E/RIP-CP/F/

Stenter Frame MONTEX 6500

Quantity: 1, Year: 2013, Model 6 F Twinair SD45A81358
Perfect for the treatment of woven and knitted fabrics: The Montex stenter offers the
latest technology for the optimum customer benefits. The sophisticated chamber design, the
individually controlled air guidance system with maximum temperature precision and
temperature distribution or the excellent energy management are just a few of the factors that
make the Montex stenter indispensable for high-quality finishing.
• Stenter frame range Montex 6500-6F TwinAir
• Manufacturer: MONFORTS• Year of construction: 2013• Nominal width 3.000 mm• Working width 600-2.800mm• Fabric entry: from big role
• Single layer stenter• Two- cylinder padder: Matex 6000• Mahlo Orthomat RFMC- 12E weft straightener with 6 optical heads• Working speed up to 100m/min• 6 chambers heated with gas• Horizontal chain with clips and needles• Cooling at the exit with air blowers• 2 cooling cylinders• Fabric delivery in big roll• 1 exhauster

AJ04/090226E/AYL-AR/F/

MONTI MAC ITALY

Quantity: 1, Year: 2013
1 pcs. Grey preparation line – model 1090,Italy
1 pcs SUPERAUTOMATIC DOUBLING FOLDING AND MEASURING MACHINE
MODEL LAFRA 200 TDD on pallets base version, 1 pcs HEAD TO HEAD sewing machine on movable stand 1 set
Description : GREY PREPARATION LINE – mod 1090, Fabric width from 1800 mm up to 3000 mm, Kind of fabric - 100 % cotton for BED LINEN – dry condition
Kind of sewing – BUTTED seam 1 needle, 1 thread, with reinforced stitch on both edges.
Fabric inlet : Pallet with OPEN Width and double in fabric, Bales with Open width and double in fabric
• Cradle to contain fabric rolls having maximum diameter up to 500 mm
• Sewing rail mod. TA21-3FY : For fabric head to head sewing butted seam sewing
machine that makes a sewing straight and flat
• Inspection table with upper light equipped
• Brushing device with 2 motorized brushes, installed in a steel painted cabinet.
• Dust vacuum: Suction unit made by centrifugal fan and filters.
• Selvedge shifting during the up rolling operation.
• Fabric delivery: in roll.
Description of : SUPERAUTOMATIC DOUBLING FOLDING AND MEASURING
MACHINE MODEL LAFRA 200 TDD on pallets base version, General features
Useful width of the doubling triangle 3200 mm, Useful width of the machine 1600 mm, Folded material pack, max height 2000 mm
Material unwinding from big rolls, small rolls, from folds
Measuring: In the machine 3 measuring systems are placed: one mechanical fold
counter to give the total measuring of the folded pack, an electronic one to give the control
measure for daily or weekly production and an electronic count-meter to give the total meters
of the palletized cloth.
Material stocking: Whether is doubled or openly folded, is prepared in perfectly
squared pallets up to 2.000mm height form the floor(ground)
The table descent is automatic and controlled by an oleo dynamic device that, enables
a constant and automatic lowering. The maximum capacity by the table is about 1500kg.
Description of : HEAD TO HEAD sewing machine on movable stand 1 set
Head to head sewing machine with movable stand model TU03/105
Butt seam sewing head model TC 105 E- 44 Volt
1 pcs Movable stand on wheels model TU03- 220 V

AJ04/090226E/CI-C/F/

Washing Machines NEXIA

Quantity: 1, Year: 2018, Model Machine DE FRANCESCHI LC 55, Building Year 2018
Voltage 400V 3PH+PE 50/60HZ, Power Installed 9 KW, Heating Type Steam Max 4,5 BAR, Weight Machine 1680 KG, Max Spin Speed 829 RPM
The LC series is the ideal solution for the needs of hotels, restaurants, hospitals,
nursing homes, residential care homes, wellness centers, and more. The new super-spin
washing machine is a premium product, the result of in-depth technical and design studies,
and satisfies the customer in every way: machine reliability, quality results, ease of use, and
ergonomics.
Thanks to the inverter, the drum speed can be controlled so that the spin acceleration
occurs gradually, thus avoiding mechanical stress on fabrics.
Users can easily create their own wash programs, saving time and programming costs.
By optimizing the use of hot and cold water, the washing machine alternates between
cold and hot water, precisely reaching the set temperature. By heating the water gradually,
this system prevents any thermal shock to the laundry. The machine uses hot water available
from the water mains, saving energy costs and reducing wash cycle time.
• Load capacity: 55kg• Basket diameter: 977mm• Basket depth: 753 mm• Basket volume: 565L• Super centrifuge: 829 rpm

AJ04/090226E/P-A/F/

DRYER NEXIA

Quantity: 1, Year: 2018, Model Machine NEXIA NDRYST 55S, Building Year 2018
Voltage 400V 3PH+PE 50/60HZ, Power Installed 2,2KW, Weight Machine 806KG, Basket Spin Speed 25 rpm
Microprocessor for automatic and manual cycles: 30 programs available.
Scheduled cooling cycle at the end of the drying program to prevent thermal shocks to the
dried garments.
Simplification of maintenance thanks to the display notification of possible faults.
Drum rotation reversal to ensure uniform drying.
Nexia Ndryst has AISI 304 stainless steel basket and stainless steel porthole diameter.
Wide opening door angle (180°) for easy loading and unloading garments.
• Volume: 1085L• Diameter: 1200 mm• Load capacity: 36kg• Steam heating

AJ04/090226E/AC-A/F/

MATHIS laboratory mini-jigger

QUANTITY: 1, YEAR: 2005, Type WJ 15009- 350 , The WJ jigger is a closed-type laboratory dyeing machine for textiles (and blends).
Being closed allows the use of reduction agents in the dye bath safely.
It is used for exhaust dyeing of fabrics under controlled conditions, especially at
laboratory scale to simulate and test dyeing processes.
«WJ» 350, «WJ» 500
Roller width : 350 mm, Batching diameter: 150 mm, Material speed : 0.5 – 10 rpm
Material tension : infinitely adjustable, Temperature range : 20 – 95 °C
Liquor content min. : 400 ml, Liquor ratio to : 1:3
Cooling: Cold water, Program selection: Time-controlled, endless, passage counter
Dimensions: W x D x H 890 x 600 x 620 mm, Weight ~105 kg

AJ04/090226E/P-A/F/

SINGEING MACHINE IN.TES, Italy,

Quantity: 1, Year: 1991, working width 270 cm, The singeing machine uses controlled flames to burn away
loose fibers and fuzz from fabric surfaces, creating a smoother and more refined
material for better dyeing and finishing. Machine functional.

Confection Machines

1. BED COVER SEWING MACHINES WITH AUTOMATIC ELASTIC INSERTION
IN 4 CORNERS - RIMAC R3000-K3 = 5 pcs. Year 2006
The machines are equipped with a PEGASUS sewing head.
One operator can operate 2 machines where 650 covers can be made/8 hours/person or 1
machine where 376 pieces can be made/8 hours/person.
2. TAILORING MACHINE + ROLLER LIFTING CRANE , year 1999, – this consistsof the cutting table + the tools for arranging the fabric on the table and cutting
3. 2-HEAD AND 5-THREAD OVERFILL MACHINES , year 2014
4. JUKI –MO 6716S, year 2006 = 10 machines
-sewing speed= max 7000rpm
-needle spacing(gauge)= 4,8mm

Confection Machines

1. BED COVER SEWING MACHINES WITH AUTOMATIC ELASTIC INSERTION
IN 4 CORNERS - RIMAC R3000-K3 = 5 pcs. Year 2006
The machines are equipped with a PEGASUS sewing head.
One operator can operate 2 machines where 650 covers can be made/8 hours/person or 1
machine where 376 pieces can be made/8 hours/person.
2. 1 pcs. sewing machine RIMAC -3000 – elastic insertion in corner and all around ,
head Juki
3. TAILORING MACHINE + ROLLER LIFTING CRANE , year 1999, – this consists
of the cutting table + the tools for arranging the fabric on the table and cutting
4. Linear sewing machine , code 8300 N, 8500, 8700 Juki - 80 pcs
5. 1 needle and 3 thread overlock machines , Juki, - 3 pcs.
6. 2-needle, 5-thread overlock machines Juki MO 6716S , – 30 pcs.
-sewing speed= max 7000rpm
-needle spacing(gauge)= 4,8mm
7. Baratto sewing machines, year 2004 - 2 pcs.
8. Sewing machines surpiqure Juki , – 3 pcs.
9. Sewing machines surpiqure Brother – 5 pcs
10. Electronic sewing machine zig-zag Brother - 6 pcs.
11. Overlock machine SIRUBA 737Qe- 504M2 – 1 needle – 3 threads - 6 pcs.
12. Sewing machines for buttons Jack- 2 pcs.
13. Sewing machine for buttonhole Juki – 1 pcs.
14. Sewing machine for buttonhole Jack - 3 pcs.
15. Sewing machine Pegasus - bourdon – 13 pcs