Showing 1–50 of 129 results

Show sidebar

AB60/220721/

PICANOL Rapier OptiMax-4-R-190

Quantity: 2, Year: 09/2011, working width 1900mm, 4 colours, free flight gripper system with large gripper left side, electronic dobby STAUBLI type 2622B 12 levers installed. Each equipped : SUMO, ELO, ETU, 4 weft colours, bobbin stand 4 colours, feeder support, 4 weft feeders CHRONO X2 / X3 with TEC weft tensioner, mechanical weft cutter, double warp tension rolls Ø 120mm with spring RHS, double pressure roller, 10 heald frames DRC30 ALUPOWER 124 13” C, warp beam position 14, warp detection GROB with 6 detection bars, 1.5 warp beam with flanges Ø 1100 mm, 4000 healds, 4000 droppers, Elsy LHS+RHS, waste cutters LHS+RHS on loom 1 + cabling for thermo cutters but without cutters, thermo cutters LHS+RHS on loom 2, touchscreen (+USB), small step, waste-system, LDEC, external batching motion NEUENHAUSER with walking floor and lighting table.

AE30/080721D/AT/F/

Picanol Air Jet looms

Quantity: 24, Year: 2007, model: Omni plus 800, Width 190cm, staubli cam 1661, 2 nozzles, with off loom take up

AB60/060721D/PO-AL/F/BE/

Picanol Air Jet Looms Omniplus

Picanol Air Jet Looms Omniplus-F-2-P-190
Quantity: 4, Year: 2002
Working width 1900mm, 2 colours, STAUBLI Cam Box type 1661 with 6 Levers
Each : 6 Harness Frames, 2 Weft Accumulators, 1 Warp Beam 700 mm.

Picanol Air Jet Looms OmniPlus800-F-2-P-190
Quantity: 2, Year: 2015, Working width 1900mm
2 colours, Staubli Cam Box type 1681 with 6 Levers
Each: 6 Harness Frames, 2 Weft Accumulators, 1 Warp Beam 700 mm.

AE56/040721D/CI-A.L/F/BA/

Picanol Omni-plus 800

Quantity: 40, Year: 2011, Width 190cm, Staubli 2861B dobby, Heald frames 6 pcs , 4 nozzles, 2 weft feeders , 1.5 beam/cloth roller, Excellent.running condition, stopped in warehouse

AF90/040721D/CA.L-A.L/C/BE/

Picanol Omni Plus 800 Weaving Looms

Quantity: 2, Year: 2015, Width: 190 cm. 2 colors, Cam box, 6 levers, 6 harness frames
2- 2231 weft accumulators, 1- warpBeam700 mm. diam. warp beams

AC09/240621/

Picanol Optimax Rapier

Quantity: 66 , Year: 2009-2010, Shedding Mechanism : Cam, Working Width in cm : 190, No Of Colors : 2, Shedding Motion Make : Staubli, Shedding Motion Capacity : 8, Shedding Motion Installed Capacity : 8, No of Frames Supplied : 6, No of Warp Beam Supplied : 2, Cloth Take-Up Type : Batching Motion, Beam Flange Dia in mm : 1100

AB52/220621/

Picanol Weaving Looms

Quantity: ‎6, Year: 1999, Type GAMMA 4-R, suitable for Denim, Width 190 cm, 4 colours, With batcher ‎, 4 weft feeders IRO LUNA M ; Staubli DOBBY 2861 with 16 shafts, 16 levers ; 10 healded frames per loom, ELSY, SUMO MOTOR, 1.5 beams (diameter 1000 mm); Separate Batching motion, All looms predisposed for cloth roller drive.
380 VOLTS / 50 HZ

AC09/080221/

Picanol Gammax & Gamma Rapier

Picanol Gammax Rapier
Quantity: 14, Year: 10 X 2003, 4 X 2004, Shedding Mechanism : Dobby
Working Width in cm : 190, No Of Colors : 10 X 4, 4 X 6, No Of Prewinder Set : 10 X 4, 4 X 6, Shedding Motion Make : Staubli
Shedding Motion Model : 2670
Shedding Motion Type : Electronic, Shedding Motion Capacity : 20, Shedding Motion Installed Capacity : 16, No of Frames Supplied : 10
No of Heald Wire Supplied/Set : 4000
Take-Up Motion : Electronic, Let-off Motion : Electronic, Temple Type : Normal, No of Warp Stop Bar : 6, No of Dropper Supplied : 4000
No of Warp Beam Supplied : 1, Color Selector Type : Quick Step, Warp Beam Dia in mm : 1000, No of Cloth Roller Supplied : 1, No of Back Rest Roll : 10 X 1, 4 X 2, Selvedge Type : Elsy L + R

Picanol Gamma Rapier
Quantity: 36, Year: 8 X 1999, 12 X 2001, 16 X 2002
Shedding Mechanism : Dobby, Working Width in cm : 190, No Of Colors : 20 X 4, 8 X 6, 8 X 8, No Of Prewinder Set : 4, Shedding Motion Make : Staubli, Shedding Motion Type : Electronic
Shedding Motion Model : 28 X 2622, 8 X 2681
Shedding Motion Capacity : 28 X 12, 8 X 20
Shedding Motion Installed Capacity : 28 X 12, 8 X 16
No of Heald Wire Supplied/Set : 4000, Take-Up Motion : Electronic, Let-off Motion : Electronic, Temple Type : Normal, No of Dropper Supplied : 4000, No of Warp Beam Supplied : 1, Color Selector Type : Quick Step, No of Frames Supplied : 26 X 6, 10 X 10, No of Back Rest Roll : 28 X 1, 8 X 2, No of Warp Stop Bar : 14 X 4, 22 X 6, Warp Beam Dia in mm : 10 X 800, 26 X 1000, Cloth Take-Up Type : 8 X Batching Motion, 28 X On Loom, Selvedge Type : Elsy L + R, All With Motor Sumo

AG62/170521/

Picanol Omni Plus 800 Loom

Quantity: 12, Year: 2010, 5 x 2200mm – 7 x 1900mm, Staubli dobby 2871, 4 color, 4 weft feeder, 13 H.frame, 1.5 Beam, 1.5 C/ roller.

AA02/210521D/ALI/F/

Picanol Jacquard Weaving Looms

Quantity: 10, 6x Type GTX-190 / 2x Type GTM-AS – 190 / 2x Type GTX- 280, Year: 1998-1993, With Bonas Electronic Jacquards, Model IBJ / ASJ, Model controllers, Fully Loaded, Batchers, Warp Beams, 8 Color weft feeders, Droppers, Plus, 1x Large lot of Loom and Jacquard Spare Parts.

AB60/190521/

Picanol Rapier Looms GAMMA-4-R-190

Quantity: 1, Year: 2000, Working width 1900mm
4 colours, Electronic STAUBLI dobby type 2622 with 12 levers installed, Sumo motor
Equipped with :
2 weft accumulators ROJ Chrono with bobbin stand and electrical command box, 1 warp beam Ø 1100mm, 1 batching motion PBM-1 with weavers’ walking floor, 6 warp stop motion bars, 6.000 healds, 6.000 droppers, 6 heald frames for 13” heddles DRC2, Elsy L&R, double back rest.

AB60/190521/

Picanol Air Jet Weaving Looms OMNIplus-F-4-P-190

Quantity: 3 , Year: 2000
Working width 1900mm, 4 colours, STAUBLI cam box with 10 levers installed
Each equipped with :
2 weft accumulators 2231Plus, 1 warp beam, Pre-equipped for batching motion but without batching motion, 4 heald frames SCHMEING 11” C, 5 warp stop motion bars, Double warp tension, single pressure roll.

AB60/190521E/YR-R/F/

Picanol Rapier Weaving Loom

Quantity: 1
Year: 11/2018
Type: OptiMax-i-8-J-190
Working width 1900mm, 8 colours
Free flight gripper system, without connection gear for jacquard and without jacquard, Equipment : SUMO, ELO, ETU, PRA, 8 weft colours, electronic motorized weft cutter, single warp tension roll Ø 120mm with spring on right side and foreseen with supports for 2nd warp tension roll but without 2nd warp tension roll, single pressure roller, warp beam position 11, warp detection GROB with 8 detection bars, Elsy right and left, electrical waste cutter right and left, ERGO right, warp beam Ø 805mm, touchscreen, waste-system with dustbin, Blue Box (Ldec), cloth roller, max. speed 660tpm, DEMO – LOOM only worked at Itma fair 2019 only 356 running meters.

AC09/040521/

Picanol Optimax Rapier

Quantity: 1, Year: 2011, Shedding Mechanism : Dobby, Working Width in cm : 190, No Of Colors : 4, No Of Prewinder Set : 4, Shedding Motion Make : Staubli, Shedding Motion Model : 2622B, Shedding Motion Type : Electronic, Shedding Motion Capacity : 12, Shedding Motion Installed Capacity : 12, Rapier Travel Over : Free Flight.

AE56/060421/

Picanol Optimax Rapier Loom

Quantity: 60, Year: 2011, width 190cm, 2861 dobby 2 feeder, 12 shaft, 8/10 frame, 5000 dropper, 5000 wire, 1 beam 1 roller, can test running

AE02/250220/BY/

Picanol Air Jet Looms OmniPlus F-2-P

Quantity: 5, Year: 2001
ww. 1900 mm, Stäubli cam box 1761, up to 10 harness frames (6 pcs installed)
2 pre-feeder 1131, Sumo motor, Warp stop motion type Kasuga, 1 warp beam (dia. 1000 mm), 1 cloth roller
Lots of spare parts and accessories are available.

AC83/150321E/AR.OL-A/F/BY/

Rapier weaving machine Picanol Gamma 8-R

Quantity: 8, Year: 3 x 1998, 5 x 1999, working width 190cm, with dobby Staubli 2670 ( capacity max 20 levels), Sumo motor, 8 colours, weft accumulator Iro Luna, guided rapier, electronic take up, electronic let off, none heald frames, 6 stop warp bars, 1,5 warp beam,

AD22/110321/

Picanol Omni Plus 800

Quantity: 48, Year 2010, 4/6 color, width 190 cm, staubli 2861B dobby
24 sets with 4 nozzles 4 weft feeders
24 sets with 6 nozzles 6 weft feeders
heald frames 10 pcs, 1.5 beam / cloth roller, Stoped on the mill floor

AG45/280221D/T.L-A/C/BT/

Picanol Omni Plus Airjet

Quantity: 10, Cams width 190cm, 4 color, Cam box, 2 weft motor, 1 warp beam, Without harness frame, 8 levers, With batchen motions.

AB60/220221/

Picanol Air Jet Weaving Loom

‎Quantity: 1 , Year:07/2014, Type: OmniPlusSummum-F-4-P-190, working width 1900mm, 4 colours, cam box Staubli type 1781A ‎with 10 cams 4/1, 11 levers, equipment : SUMO, ELO, ETU, PRA, AIRMASTER, 4 weft ‎colours, 4 weft feeders Picanol type 1131 X2 with PFL and balloon breaker, feeder stand, ‎bobbin creel, double warp tension rolls Ø 120mm with springs, single pressure roller, warp beam ‎position 11, 2 filling detector next to the reed: 10 heald frames Steel Heddle XLF Xtra Light 152 ‎DRC30-type 13” C, warp detection GROB, E-LENO-device (motorized) right and left, Elsy ‎plus right, electrical waste cutter right, warp beam Ø 805mm, touchscreen, waste-system with ‎dustbin, Blue Box (Ldec), cloth roller (TTC Loom)‎

AB55/130221/BD/

Picanol Gammax 12 J Weaving Looms

Quantity: 2, Year: 2003, Type Gammax 12 J, Width 190 cm, 12 colours, With 12 Roj Chrono weft feeders, Stäubli LX 1600 B Jacquard with 6144 hooks capacity, year 2002.

AB46/070221D/CRI-CI/F/AR/

Picanol Omni Plus Summum-F-4-R Looms

Quantity: 6
3 Picanol Summum 190cm Looms, 2017 year
Machines equipped with:
Staubli 1781A e3* DRC Cam Box
5 stop motion bars
Heddles and Dropwires as fitted
4 Weft Accumulators
2 – Beams
6 – Harness Frames
8 – Undermotions

3 Picanol Summum 220cm Looms, Years: 2015, 2017, 2018
Year: 2015 , Staubli 1681 cam box with 10 Harness Frames and 12 undermotions, this machine has top beam attachment
Year: 2017, Staubli dobby model S3260 e3* DRC/C4 Can – 10 Harness Frames and 16 undermotions
Year: 2018, Staubli dobby model S3260 e3* DRC/C4 Can – 4 Harness Frames and 9 undermotions
Machines equipped with:
5 stop motion bars
Heddles and Dropwires as fitted
4 Weft Accumulators
2 – Beams

These Machines ran 1 shift for less than 2 years.
The 2015 Loom was used in the Picanol Showroom and went into production in 2017 with top beam attachment added and software updates to match 2017 units.
Produced Greige Fabrics including flag material and sheeting.

AB46/280121/

Picanol Omni Dobby

Quantity: 8, Year: 1999, Width: 190 cm., Staubli 2861 dobby , 10 harness frames, Droppers and heddles as fitted, 1.5 beams, 2 color with 2 weft accumulators, No side tuckers

AC05/200121E/T-A.R/C/BG/

Picanol Looms GTX-4R

Quantity: 5 , Year: 11/1994, Width: 190 cms. with Staubli dobby type 2660 of 14/14
Equipped each with: 3 Picanol Laser weft feeders, 14 heald frames, 1,5 warp beams, 1,5 cloth rollers, heddles and droppers.

AA32/190121D/CA-A.L/M/

Picanol Gammax

Year: 2006, 190cm, 6-8 colour machine, Few machines with original top beam(6 machines), Staubli dobby. 16 levers installed
With: 14 -16 average frame, 2 beam and cloth roll, 6000-7000 headles and dropers, 3-4 feeder, Machines are in excellent working condition. Machines are working in one of the best textile units.

AB60/180121/

Picanol Rapier Looms GAMMA-2-P-190

Quantity: 6, Year: 2002, Working width 1900mm
2 colours, STAUBLI cam box type 1620 with 7 levers installed, Sumo motor
Each equipped with :
2 weft accumulators ROJ Chrono with bobbin stand and electrical command box, 1 ½ warp beam Ø 1100mm, 1 batching motion PBM-1 with weavers’ walking floor, 6 warp stop motion bars, 6.000 healds, 6.000 droppers, 6 heald frames for 13” heddles DRC2, Elsy L&R, double back rest. Remark : looms are equipped with LDEC.

AB60/050121/

Picanol Air Jet Weaving Loom

Quantity:1, Year: 01/2012 , Type OmniPlusSummum-F-4-P-190 , working width 1900mm, 4 colours, cam box Staubli type 1681A, ‎‎8 levers, equipment : SUMO, ELO, ETU, PRA, AIRMASTER, 4 weft colours, 4 weft feeders ‎Picanol type Blue 22 EasySet with PFL and balloon breaker, feeder stand, 2 bobbin creels, ‎double warp tension rolls Ø 120mm with springs, single pressure roller, warp beam position 11, 1 ‎filling detector next to the reed: 8 heald frames Steel Heddle XLF Xtra Light 152 DRC30-type ‎‎11” C, warp detection GROB, E-LENO-device (motorized) right and left, Elsy plus right, ‎electrical waste cutter right, warp beam Ø 805mm, touchscreen, waste-system with dustbin, Blue ‎Box (Ldec), cloth roller.‎

AA32/301220D/RP-R/F/BQ/

Picanol Optimax

Year: 2014-2015, Width 190cm, Staubli Dobby (16-18 levers), Machine with 6-8 color option.
With: 10 frames, 1.5 beam, 3 feeder, 5000 he’d and droppers, 1.5 cloth roll, Machines with guide teeth. Machine perfectly working with 500 – 550 rpm.

AG62/161220/

Picanol Omni Air Jet loom

Quantity: 25 , Year: 1999/2000, 1900mm width
Stuabli positive dobby – 8set
Stuabli negative dobby – 17set
4 color – 8set, 2 color – 17set, 2 Beam, 2 C/roller, 10 H/ frame

AE56/111220/

Picanol Optimax Rapier Looms

Quantity: 52, Year: 2009, Width 190cm, 2861 dobby, 3-4 feeder, 12 shaft, 6-8 frame, 1 beam 1 roller, Running condition.

AG57/251120/BQ/

Picanol Omniplus Summum 2 P

Quantity: 16, Year:11/2013 and Machine arrived on 2014, 190cm
Maximum speed 1100 Rpm , Running at 925 Rpm
2 color, 2 Acc Picanol Iro 2231X2, yarn Sensor in cone stand
FD sensor Front of Reed, Electronic weft cutter,
Staubli Cam box 1681 /8 levers capacity, Installed 6 levers, 4 frames
6 bar warp stop motion, 6000 Healds and droppers
Electronic selvedge cutter RHS, waste selvedge Elsy RHS,
Electronic Take-up and Let-off, 2 back rest roll, Easing Motion
Electronic Rotary leno with individual servo Motor LHS/RHS,
1.5 Beam with Beam dia 1000mm, 1.5 Cloth roll,
1 Reed
Status : Running

AB60/241120/

Picanol Air Jet Weaving Loom Omni Plus Summum 4-P-190

Year: 06/2018, Working width 1900mm, 4 colours
Cam box STAUBLI type 1781 with leveling device, Maximum 10 levers, but only 7 levers installed with 6 cams.
Equipment : SUMO, ELO, ETU, PFT, Autospeed, clamp on movable main nozzle, ARVD II plus system, automatic pick finder 4 weft colours, 4 weft feeders PICANOL type Blue 22 with balloon breaking cone, feeder stand, bobbin creel, double warp tension rolls with easing motion, single pressure roller, warp beam position 11, 2 filling detectors next to the reed, 6 heald frames GTP Hybrid Power 158 DRC-30 11”, warp detection GROB KFW 5620 with 6 contact bars, E-LENO-device (motorized) right and left, Elsy plus LHS and RHS, electrical waste cutter RHS, for warp beams Ø 1100mm but without warp beams, touchscreen, waste-system with dustbin, Blue Box (Ldec), 1 cloth roller, max production speed 1200 rpm, without reed, documentation.