AE56/040722/
Staubli DX Jacquard
Quantity: 12, Year: 2011, 2688 hooks, Parts complete, Running Condition.
AB60/130622/
Jacquard BONAS CSJX
Quantity: 1, Year: 2006, format 2688 hooks of those 1760 hooks installed, with controller S600 and harness.
AB60/130622/
Jacquard BONAS LJ L0332
Quantity:1, Year: 2007, Type LJ L0332 , format 3072 hooks, with controller S600 and cardan axe.
AB60/130622/
Jacquard BONAS ZJS2-28
Quantity: 1, Year: 2015, Type ZJS2-28 , format 2688 hooks, controller BONAS type VDW S800, cardan axe, harness JTS year 2015, quick cords, 5184 ends (32+5120+32 ends), 70 repeat, reed entrance 2560 end / 153cm, total 2664 end / 159,2cm.
AF16/280522/AS/
Staubli Lx 3202 & 3200 Jacquard
AF16/280522E/RR-R/M/
6x staubli Lx3202 jacquard
Year :2007-2008
6144 hooks
jc6 controller
AF16/280522E/YA-R/M/
2x staubli lx3200 jacquard
Year :2000
8192 hooks
jc5 controller
AG12/130122/
Staubli Jacqured lx1600
Quantity: 5
4x Staubli Jacqured lx1600, Jc5 controller, 1408 hooks, Year: 2006
1x Staubli jacquard 1×1600, Jc5 controller, 2688 hooks
AB46/151221D/OS-Y/F/AR/
Staubli Jacquard Heads
Quantity: 5, Year: 2016/2017, Model LXL, 12228 hooks, JC7 controller, Those machines were working with G6500s and G6200s making airbag fabrics.
They are JUMBO heads (not regular size).
AB46/151121E/CT-C/C/
Staubli Jacquard Heads
Quantity: 10, Year: 2002, 14 Staubli LX1600B, 6144 capacity with 5600hks , JC5 installed
Some of those heads were previously installed on Dornier ATVF 8 / J width 260 and some machines run on Sulzer G 6200.
AG46/191121E/TI/C/AS/
Staubli LX3201 Jumbo Jacquard
Quantity: 10, Year: 2003/2004/2006, Number of Hooks: 10.240, Controller Type: JC5, Modules: Fully Loaded.
Note: They are suitable for carpet Machines
AA76/191021E/CS.L-R.L/F/AS/
Grosse Jumbo Jacquard
Quantity: 2, Year: 2016, 10.240 hooks are installed, C26 controller, Model EJP 6X.
AG12/111021/
Staubli Jumbo Jacquard LX3201
Quantity: 8, Year: 2002-2006, 10.240 hooks, 9.728 hooks, Installed jc5 controller from Somet rapier looms.
AA23/091021E/AS.S-A.S/F/BY/
Staubli LX 1600 B Jacquard Heads
Quantity: 14, Year: 05.2002, Type:LX 1600 B , Format: 6144 with 5700 hooks
Modul type M5.1 AQP with ball bearing pulley
Controller:JC5 converted from floppy to USB
Machines were in 2020 equipped with new lifting bearings and bushes.
Edge device (MFLE) are attached not in operation. The dust covers on the Quicklink are no longer there
Only jacquard machines are sold ( without cardan shaft; harness nor perforated harness plates etc)
Excellent condition.
AVAILABLE – MID DECEMBER 2021.
AC48/020921/
Staubli Jacquards
Quantity: 18
5x Staubli Jacquard JC7 SX with 2688 hooks Year 2013-2017
1x Staubli Jacquard JC7 SX with 3072 hooks Year 2015
6x Staubli Jacquard JC6 1602 with 2688 hooks Year 2007-2009
6x Staubli Jacquard JC5 LX1600 with 2688 hook Year 2000 – 2001
Excellent condition
AH02/220721/
JACQUARDS STAUBLI CX850 JC5 2688 HOOKS
Quantity: 5
1 JACQUARD STAUBLI CX870 JC5 2688 HOOKS YEAR 2000 (WITH MODULES M6 MODIFIEDE IN 2016)
2 JACQUARD STAUBLI CX870 JC5 2688 HOOKS YEAR 1998 (WITH MODULES M6 MODIFIEDE IN 2014)
1 JACQUARD STAUBLI CX870 JC5 2688 HOOKS YEAR 1998 (WITH MODULES M6 MODIFIEDE IN 2015)
1 JACQUARD STAUBLI CX870 JC5 2688 HOOKS YEAR 1998 (WITH MODULES M4.2 REVISED BY STAUBLI IN 2015)
AB60/190521E/LA-R/F/AO/
Electronic Bonas Jacquard SI9-20
Quantity: 1, Year: 2016, Type: SI9-20, With superstructure, With CI controller, Format 7680 hooks – installed 7440 hooks, Gear box & cardan shaft, Left drive Side, ran on a PICANOL OMNIplus-Summum-190 air jet loom, only worked at Itma fair 2016 (show model did not run production), superstructure 2400, had CI motor but now delivered with cardan axe.
AE02/140621/
Stäubli Jacquard CX 860
Quantity: 1, Year: 1997, 2688 (1344) hooks, modul M4, With new harness (year 2016 – never used)
AG28/090621E/PT-P/F/AQ/
Jumbo Bonas Jacquard
Quantity: 1, Year: 2020, 13824 hooks, Si14-24 Bonas Electronic Jacquard, Ci Controller supplied compatible with Bonas Network System with 2 x USB, 10.4″ Colour Touch Screen, Compact Flash Memory 4 GB, Gearbox Type Van de Wiele Powerbox & Drive, The jacquard is currently working on loom Itema R9500 and has a Cardan axe, no harnesses., Owner has received on last Jun-2020 from beglium, however, its total actual working period does not exceed 3 months.
Jacquard is a very good condition. With reference to the above project, please find the following , technical specification summary, Installation drawing : O-1246, Shed drawing : O-1246, Harness/mounting instructions : 47-951663, Gantry recommendation : 47-951664, Boardplan (if required) : 9-47-00500
Jacquard details: Model type : Si14, Number of knives : 24, Number of hooks : 13248 fitted (13248 used), Cam Profile : Vdw55, Voltage (V) : 400, Frequency (Hz) : 50, Max hook loading (grms) : Standard
Installation details: Loom type : Itema R9500 (FPA), Loom width (mm) : 3600, Gantry height (mm) : 4200
STATUS: WORKING.
AB82/171219/
Staubli Jacquard
Quantity: 5, Year: 2002-2003, Type CX880, Format 2688 hooks capacity, 2400 hooks installed, Controller JC5
AG46/180221E/P-A/C/
Bonas Jacquard MJ2
Quantity: 4, Year: 2006, MJ2 2688 full S600 controller, For somet alpha 20/38 gear box.
AB96/200121/AS/
JAQUARD
AB96/080620E/AAO.L-O.L/M/
JAQUARD 14.336 HOOKS LX
YEAR : 2007-2008
AB96/080620E/PI-L/M/
JAQUARD 10240 HOOKS LX
YEAR : 2016-2017
AB96/080620E/PI-L/M/
JAQUARD 12288 HOOKS LX
YEAR : 2008-2009
AG46/180121E/P-A/F/AS/
Staubli DX80 Single Jacquard
Quantity: 14, Year: 2010-2011, 1408 full installed. M6 modules M6 controller. 1/2 gear box from leonardo loom.
AA02/070121D/AYP/M/
Staubli Jacquard With Independent Hook Control
1x STAUBLI Single end Control Jumbo Electronic Jacquard:
Year: 2004
Model Unival 100
Servo Driven Actuators for each single Hook
Single end control
15,360 format
14,184 hooks installed
Separate interface to the weaving machine
With JC6 Jacquard controller with touch screen
With Free Standing Chiller and Cooled Air Circulation System
For maintaining a constant temperature within the Jacquard
Complete with:
Letti Single Jacquard Free Standing Gantry
Overall width 27 feet
Width between legs 20 feet
G Dimension 12 feet 6 inches
Without Harness
Advantages:
Conventional Hooks, Knives and Jacks are eliminated
Individual height lifting of each end is separately controlled through Jacquators
Delicate and Yarns with less elongation / stretch are under stain less time
Timing of the list of each end enables the shed opening only as the weft passes
Ripple shedding put less strain on the warp ends
Synchronised jacquard and Loom
No mechanical drive from loom to jacquard
Less vibration
15,000 hook lifts with less strain due to independent separate control
IDEAL FOR TECHNICAL FABRICS, 3D FABRICS, GLASS, AND CARBON FIBERS