AC86/030226E/RR-R/F/AQ
SSM WINDER
Quantity: 1
WINDING SSM TYPE PW1 W YEAR 2006 – NUMBER 30 POSITIONS – ALIMENTATOR YARN – OIL DEVICE – COMPUTER CONTROL
MOST ELECTRIC PARTS ARE REPLACED NEW
AB45/010226E/CC-Y/F/AQ/
Savio Orion M Winder
Quantity: 1, Year: 2006, 32 spindles, 16 spindles with Clearers Lopfe TK840, 16 spindles with Clearers Lopfe TK850, Splicers Mesdan Jointair 690, Blower Magitex, Exit 5 57, Cone 150 mm, With Waxer, Has 2 tube outlets and spools, so it can work with 2 different types of thread. 380V 50 HZ, Machine it is dismantled.
AI45/310126/
Rieter Blowroom Line & Rieter Card C75
Rieter Blowroom Line:
Automatic Bale Opener A11 (2016)
Heavy Particle Separator A4 (2016)
QSS Heavy Particle Separator (2015)
Pre-Cleaner B12 (2016)
Unimix B76 – 8 Chambers (2016)
Unistore A79 (2016)
Condensor A21 (2016)
Unicontrol Control Panel (2016)
Rieter Card C75:
Quantity: 5, Year: 2022, Lickerin: Single, Waste Suction: Upwards, Can Size: 40 x 42 inches.
AA03/310126E/AA-R/F/
Volkmann VTS08-4.11 Twisters
Quantity: 2, Year: 1991, 168 spindles each, Assembling cones 6-7″, pot día. 157 mm., delivery 6″, conicity 4°20′, yarnbreak control, Volcojet threading.
AA03/310126E/AS-R/F/
Volkmann VTS08-6.10 Twisters
Quantity: 3, Year: 1999, 160 spindles each, Assembling cones 6-7″, pot dia. 157 mm., delivery 6″, conicity 4°20′, yarnbreak control, Volcojet threading.
AA23/310126E/CT-L/F/
Ratti Twisting R341/56/7 NT260
Quantity: 1, Year: 2004
twisting machine used for yarn 466-3300 dtex
Ratti are able to wind on any kind of tubes. Standard is tubes inner dia 75 mm, length 300 mm. It is not limited with the diameter of the tube – the plates that hold the tube are changable.
We have tried a standard tubes for RPR (inner dia 56 mm on one side, 60 mm on other side, length 230 mm) and it was ok.
The winding length could be redone on smaller winding length, and we have tried to change it to 190 mm (with special plates to hold the tube).
We think that only limit is the lenght between the plates and we think it is 300 mm.
AB45/290126/BY/
Savio TFO
Quantity: 3 , Year: 1995, model TDS 15 N DUOPOT
2 x 190 spindles, 1 x 180 spindles , Exit 6″, Pot height 8″, Condition:Running
AC86/270126/BY
TEXTURIZING MACHINE – BRAND GIUDICI TG30
TEXTURIZING MACHINE – BRAND GIUDICI TG30 – PERFECT FOR NYLON YARN – POLIPROPILENE YARN – POLIESTER FT YARN – REWIND COMPLETED MECCANICAL AND ELETTRICAL PARTS IN YEAR 2019 – Number 60 position possible produce two type yarn with 24 + 36 positions – Autodoffing – Jet Heberkein – Final bobin 230mm – Fused Temco – Condictions same new
AB45/280126E/YL-L/F/AQ/
PA-FA Fancy Yarn
Quantity: 1, Year: 2005, Ring Spinning and Fancy , mod. EXPO 80, 48 spindles, Suitable to produce effect yarns in medium / coarse counts , in new combinations of colors in a wide range , for both regular and or fancy yarns, Double Sampre draft ( machine can be feeding by one or two slivers ), electronic programmer PC to set fancy effects and video data processing, feeding by external feeding creel ( by slivers from Flyer or Finisher bobbins or by tapers from cans ), ring diameter 140 mm. delivery on tubes h. 600 mm. Machine will be completely refurbished before delivery, Condition: dismantled.
AI08/250126/BA/
Schlafhorst Saurer Open End spinning Machines
3 sets machine Schlafhorst Saurer Open End spinning, 432 spindles each, year is 2012, type is BD448, all device is good condition
AB45/230126/
ZINSER RING SPINNING MOD 351 COMPACT LINKED SCHLAFHORST 338
4 ZINSER ring spinning frames mod. 351 Compact
year 2004
nos 528 spindles
gauge 75 mm
tube 230 mm
ring diam 45 mm
Sholer blower
LINKED WITH:
04 SCHLAFHORST winder mod. 338
year 2004
nos 11 heads
Uster Quantum 2 clearers
waxer
conical exit 6″
Schlafhorst Blower
AE30/230126D/TP-L/F/BA/
Schlafhorst Open End ACO480
Quatity: 2, Year: 2012, MODEL: ACO480 , 432 ROTORS, 3 Robots , COROLAB XQ yarn clearer , T536/T540 rotors , 380V 50HZ
AB45/220126E/RY-Y/F/BG/
SSM PW 1-F Rewinding
Quantity: 1, Year: 1998, 42 Spindles left side, Exit cylindrical 8” (230 mm) – diameter interior 85 mm – external 95 mm, Oil dispositive, yarn tensioner, Yarn sensor, Manual doffing, Computer for program all work parameter, Kind of yarn filament yarn, smooth yarn, texturized yarn, elastic yarn, silk, Range of counts: 10 – 10.000 dtex, Individual drive for each spindle, 400 volts 50 hz.dismantled
AJ02/210126/AR
Arnold double covering & OMM SPE Fully Electronic Covering Machine, OMM BVE Bobbin Winder
6 H.H. Arnold double covering machines, 13″ spacing between the decks. Loaded in containers.
Serial#1548 Year 1950
Serial#1565 Year 1950
Serial#2044 Year 1956
Serial#2045 Year 1956
Serial#2994 Year 1963
1 OMM SPE Fully Electronic Covering Machine, OMM BVE Bobbin Winder, with 320 aluminum spools, mill floor
Covering machine Serial#0102001001 Year 2001
Bobbin winder Serial#0102001001 Year 2001
AB45/210126E/CP-R/F/AQ/
Rite Assembly Winder
Quantity: 1, Year: 2001, Model ARD/L, No. 28 spindles, Exit 8” cylindrical, Automatic doffing, Exterior creel N° 4 ply + N° 1 ply down.
AD65/210126E/ASI-AI/M/AS/
SAVIO VOLUFIL WINDERS
5 x SAVIO VOLUFIL WINDER
Model Espero
Year 1×2011, 4×2012
45 Positions
Take up 8”
Conicty 4.20
AJ01/200126/CJ
LEZZENI TBR DELTA Twister
1 LEZZENI Twister double twisters mod.TBR/DL
Machine will be working till April 2026
100% working
AH27/140425D/CS-C/F/
Saurer Volkmann TFO VTS-10-0
Quantity: 25
Year: 2023, new one, never fitted, 200 positions each, pot dia. 137×170 mm.
Machine Origin : Made in Saurer
Main drive KW usage: 30 KW
Main Drive with frequency converter exist or not: WITH FREQUENCY
Twisting Drive with frequency converter exist or not: WITH SERVO
What Voltage and Hertz are used: 380 V 50 Hz
Computer display exist or not Parameters: WITH TOUCH SCREEN
Spindles gauge: 207
No. of sections: 10
No. of spindles per sections: 20
Total No. of spindles: 200
Feed package type: 126 mm
Feeding empty tube dimensions: 38/44/170
Take up package type: taper type
Take up empty tube dimensions length, diameter, (4’20/5’57): Can be configured according to the situation.
Baloon limiter exist or not: NOT
Usable yarn count range: 20-200
Spindle speed range: 1000-12000
Twist range: 80-2600
Paraffin waxes exist or not? NOT
Machine length: 24100 mm
Machine Width: 600 mm
Machine Weight: 4800 Kg / 5800 Kg
bobbin holder movement is pneumatic
Machines are Volkmann China not Volkmann Germany
AA08/200126E/RR-A.L/F/BO/
Schlafhorst 338 Autoconers
3 Automatic cone winder SCHLAFHORST 338 RM
– n.60 heads each
– manual feeding by spools
– 9-position revolver
– grooved drum 2,5-turn
– pitch 6″ (152 mm)
– conicity 4°20’
– splicer G22
– electronic clearers Loepfe TK 940F
– waxing device
– cone magazine with single basket each head
– conveyor belt for unloading bobbins
– lighting
– blower Sohler
– year of construction 2006
AA10/190126E/OS-Y/F/AQ/
Volkmann VTS 05-C Double Twisting (2×1) /Cabling
Quantity: 1, Year: 2012, mod. 05-0 type 8.02, 40 heads (20×2), feeding 10″, free ballon, can dia.350 mm., delivery 10″, pneumatic doffing and air threading device. Machine running.
AC32/160126/BC/
Zinser 421 E Ring Spinning
Quantity: 3, Year: 1991, Ring Frame for wool spinning, Type : 421E, 3 set x 472 spindle, Ring Guage: 75mm
Ring Dia : 50mm x 2 set With attached Lycra device : 2 set / 45mm x 1 set Without Lycra device ( Normal )
Condition : Stop on mill floor Jan 2026
AC86/160126/AQ/
Savio 2×1 Twisters GEMINIS
Quantity: 2, Year: 1996, mod.GEMINIS 204B, 216 spindles, Duopot feeding 6″ 4°20 x2, gauge 200 mm., delivery 6″, 4°20, air threading device, blower.
Machines sold without splicer.
AE30/150126D/ARP-AC/F/
Saurer BD480 Open End
Quantity: 1, Year: 2019, 512 Rotors, Rotor size: 34mm, With yarn lifting, Running on mill floor.
AA08/150126E/AYI-O/F/AQ/
Sant’Andrea RF4/A Finishers
Quantity: 2, Year: 2002, 16 heads, Rack for 32 cans 800 x 1200.
The machines worked until December 22, 2025.
All the relevant cans, finishing tubes, and all spare parts available at the factory will be delivered with the machines.
All the machines are in perfect condition, fully functional, and have always processed 100% wool for weaving sector.
AA08/150126E/RL-C/F/AQ/
Zinser 421E Ring Spinning with Pinter System for Lycra
Quantity: 1, Year: 1992, 580 spindles, With Magitex blower and Pinter system MA1 from 2023, gauge 82.5, ring 51, tube 260.
The machines worked until December 22, 2025.
All the relevant cans, finishing tubes, and all spare parts available at the factory will be delivered with the machines.
All the machines are in perfect condition, fully functional, and have always processed 100% wool for weaving sector.
AA08/150126E/CY-A/F/AQ/
Zinser 421E Ring Spinning
Quantity: 1, Year: 1992, 580 spindles, with Electro blower, gauge 82.5, ring 51, tube 260.
The machines worked until December 22, 2025.
All the relevant cans, finishing tubes, and all spare parts available at the factory will be delivered with the machines.
All the machines are in perfect condition, fully functional, and have always processed 100% wool for weaving sector.
AA08/150126E/TSI-RLI/F/AQ/
Combing PB33, Sant Andrea Blending, Gill Boxes
1x Blending machine Sant’Andrea 2M, Year: 1997 – Output can 700 x 1000
1x Intersecting Sant’Andrea CSN, Year: 1994 – Output can 700 x 1000
5x Combing machines NSC PB33 LJ, Year: 2003-2006 – Output can 800 x 1200
2x Intersecting NSC GC15
1x Intersecting Sant’Andrea CSN
1x Intersecting Sant’Andrea SHE 24, Year: 2011
The machines worked until December 22 Year: 2025
All the relevant cans, finishing tubes, and all spare parts available at the factory will be delivered with the machines.
All the machines are in perfect condition, fully functional, and have always processed 100% wool for weaving sector.
NOTE: FOR SALE AS ONE LOT
AA02/130126E/LTI-CI/M/BY/
Oerlikon Barmag Draw Texturizing
Quantity: 1, Year: 2016, Model eFK-PES, 288 Positions, Double Heaters, Double Sided with Independent drives, Godet Draw Texturing Units, Double Creels, Lycra Attachments.
AB88/090126/
HDB (Houget Duesberg) Carding Machine
Quantity: 2
1x 2,200 mm working width, three sections (opener, pre-carding, and can), with Blamir trolley.
1x 2,500 mm working width, with 2 feed cylinders and weighing system.
AC09/090126/
Schlafhorst SE12 Open End ACO480
Quantity: 2
1x SAURER AUTOCORO 9 Open End Spinning Machine, Year: 2016
No. of Rotos : 360, Yarn Clearer: Corolab XQ, Measuring Head: XQ, No. of Piecer Carriages: 4, Opening Roller: B174DN, Rotor Diameter: 48 mm, Length Measuring: Available, Delivery Package: Cone, Conicity: 1’50’, Waxing: Available, Inverter Suction Motor: Available, Flexpack FX: Available.
1x SAURER AUTOCORO 10 Open End Spinning Machine, Year: 2023
No. of Rotors: 768, Yarn Clearer: Corolab, Measuring Head: XQ, Opening Roller: B20 DN, Rotor Diameter: 30 mm, Rotor Type: G630 BD, Length Measuring: Available, Spinbox: SE 20, Conicity: Cylindrical, Waxing: Available, Multilot: 3, DCU (Doffer): 6, Synchro Piecing: 36, EVA: Available, SDSI: Available, Upper Thread Sensor Monitoring: Available, Tube Selection (Colour Sensor): Available, E-Drive: Available, Pilot Spinning: Available.
AI08/080126/BA/
Line Tow to Tops Breaker for Polyester, Schlumberger NSC
Composed of:
1x TT11 Breaker/Cutter, Year: 1991.
1x GC13 Gill, Year: 1988.
1x GC12 Gill, Year: 1986.
1x GC14 Linked Bump Press, Year: 1992.
Machines are high quality and have not worked full shifts and had less orders during production.
It is very good condition, the machines worked just few days a week.
AC86/160126E/AC-R/F/AQ/
SAVIO ESPERO
32 threads from cone to cone
I used it to make dyeing cones and wax the dyed yarn.
I am a knotter and weaver.
AH25/070126E/RRL-RL/F/AQ/
Production Line Includes: Texturing, Twisting, Dyeing, and Packing
1x GIUDICI Texturizing:
Year: 2002, mod .TG30 FA , 84 position, Designed for polyester yarns ranging from 10 to 300 denier.
Work from 40 dtex to 600 dtex polyestere nylon and polipropilene, full automatics.
1x IMPIANTI NOVOPAC Packaging Machine
Year: 1997, Model: ARF500 + 1406B.
2x MENEGATTO Texturizing:
Year: 1999, Model: TMA 43, Total Spindles: 168 (84 per side), Sections: 7 per side.
Texturizing Ovens: 84 high-temperature electric ovens (1000 mm length, 100–650°C range)
Fixing Ovens: 84 high-temperature electric ovens (700 mm length)
Feeding Shafts: 4
Rotary Creels: 14, each with 24 bobbins arranged over 3 floors
Drive System: 168 TEMCO drive belt spindles
Cooling System: Forced cooling with refrigeration and fume extraction
Control System: Electronic control with Menegatto software
Doffing: Manual or automatic
Work from 40 dtex to 600 dtex polyestere and nylon and polipropilene, full automatics.
1x OBEM Dyeing and Steaming Machine
Year: 1997, Model: 97003
1x RPR Texturizing:
Year: 1997, Model: 3SDX4
Take-up Positions: 168
Total Power Consumption: 143 kW
Yarn Compatibility: Polyester yarns ranging from 33 to 330 dtex
Production Speed: Up to 1000 meters per minute
3SDX 4 work from 40 dtex to 600 dtex polyestere nylon and polipropilene, Electronics endowed with pc that can change the form of manufacture in automatic; can work both to an oven and to two.n. 4 shaft of workmanship, position of job 84 positions for forehead, total 168, or rather every front can independently work from 84, endowed with plant for punching of the yarn to air; electronic control of the production and the quality.
6x RPR Twisting GC 96:
Year: 1998, Model : GC96D
Number of spindles: 90–96, depending on configuration.
Can/tub diameter: approximately 270 mm; take-up tube length: approximately 230–290 mm
Package capacity: up to approximately 3–5 kg per package.
Motor power: approximately 22 kW; electrical specification 220 V / 60 Hz.
10x VEMATEX Twisting:
Year: 1990, n. 72 spindles melted by cm 250 with centralized taper.
Vematex WB-T — Double Twist TFO Twister.
AA79/070126/
NSC Schlumberger FM8N Roving Frame
Quantity: 1, Year: 1997, Horizontal rubbing frame, 20 spindles, Manual doffing, 355mm pitch, 2 roving’s per bobbin, Input 12 to 15 ktex according to the material, roving weight 0.66 -5.5Nm, draft 9 to 26 by gear box, nsc double apron drafting, draft apron 145 mm wide, rubbing speed 1200 cycles /min maximum, number rubs 5 to 8 per meter, 300mm bobbin, delivery speed up to 220meters/min. Fitted with new drafting aprons, new rubbing aprons, new front air valves, new sliver guides, new barrel holders.
AH25/070126/AQ/
RPR Twisting
Quantity: 6, Year: 1998, mod. GC 96, Number of spindles: 90–96, depending on configuration.
Can/tub diameter: approximately 270 mm; take-up tube length: approximately 230–290 mm.
Package capacity: up to approximately 3–5 kg per package.
Motor power: approximately 22 kW; electrical specification 220 V / 60 Hz.
NOTE: The machine/s in the factory are almost like new (no damage or missing part), because they worked very little. Machines stopped in 2020. Some spare parts are given with the machine/s.
AH25/070126E/YO-O/M/AQ/
Giudici Frictions Texturizing
Quantity: 1, Year: 2002, mod .TG30 FA , 84 position.
Yarn Compatibility: Designed for polyester yarns ranging from 10 to 300 denier.
Double oven and automatic doffing for PES and PAM yarns of whole range of textile titles, yarns ( from 10 to 330 Dtex) full automatics.
Distribuited on 3 floors of collection and 84 TEMCO friction spindles mod. FTS525 ME open/closed, fastly change of torsion, friction and driving disks in ceramic , diam. mm 52 and thickness 9 mm., shaft diam. mm.14,5 , combination disks 1/8/1
Machine equipped with :
Extra roller for the control of tension, quality controller
Air interlacing device (that is regulator of pressure, piping, valves and quick coupling)
GQS System (iudici Quality system) to control the tension of yarn , integrated with the machine.
NOTE: The machine/s in the factory are almost like new (no damage or missing part), because they worked very little. Machines stopped in 2020. Some spare parts are given with the machine/s.
AA05/050126/BC/
Cognetex FTC Ring Spinning
Quantity: 2, Year: 1991, 448 spindles each, Ring día 48 mm., Gauge 75 mm., PK1601 drafting.
AB46/060126/BJ/
Murata Qpro Auto Winder
Quantity: 3
2x Year: 2014, 60 spindles
1x Year: 2015, 50 spindles
Model: Qpro CBF, No of Drums: 60, Yarn clearer: Loepfe Zenit, Measuring Head type: TKYM Zenit FC, FD Chanel, Waxing, Doffer: Available, Suction: Central, ot air discharge: Upwards, OHTC: Murata, GOOD CONDITION.
AB60/060126E/TY-Y/F/AO/
Rieter Card C70 L
Quantity: 1, Year: 2018, Machine for production up to 120Kg/h, CBA filling machine, Filling for polyester, polyester/Viscose blends and acrylics, Graf filling, Preparation for polyester fibres, Title of carding ribbon 12 Ktex max, Outlet diameter 600mm, Pot height 1200mm, Longitudinal introduction of the can, Separate sliver potting unit for direct floor mounting, Rotating disc for depositing 39 mm channel ribbon.
1x A 21 Series condenser year 2018
Separate support frame, Feed funnel 220 mm.
1x Pneumatic conveying system A4 V4 year 2018
1.0 m3 inverter-controlled ventilator for conveying materials.
Dimensions: Carding machine C70 : 230cm x 80cm x 250cm
Upper part pneumatic conveying A 4 V4 : 315cm x 95cm x 133cm
Down part pneumatic conveying A 4 V4 : 230cm x 80cm x 250cm
Condenser : 182cm x 100cm x 250cm
Sliver potting unit : 190cm x 115cm x 225cm
Yellow Crawn tool : 315cm x 95cm x 133cm (can be dismantled)
Pallet with motor unit A 4V4 : 150cm x 90cm x 125cm
Wood box on yellow tool : 190cm x 110cm x 105cm
Large small wood box with 2 extra rails : 286cm x 35cm x 70cm
Yellow tool trolley : 170cm x 65cm x 115cm
Complete with extra spare parts, manuals, electrical schemes, set of Tools (yellow coloured) to install.
The condition of this installation is TOP. The mill installed the line back in 2018; in 2020 due to Covid they stopped production. Ever since they did not use the installation anymore so now, they decided to sell it.
AB46/010126/
Rieter Simplex F15
Quantity: 2, Year : 2012 X1 & 2008X1, Model : F15, No of Spindles: 112, Flyer size : 16x 6, OHTC Make: Electrojet
AD65/020126D/SP-P/F/
Trutzschler Fiber Blending Line with 4 scaler
AI03/020126/
Rieter Blow Room
1x Rieter A11, Year: 2015
1x Rieter B12, Year: 2015
1x Rieter unicontrol, Year: 2016
1x Rieter B76, Year: 2015
1x Rieter A79, Year: 2015
1x Rieter A21 Condensor, Year: 2015
Including accessories:
4x Rieter transport fans
1x heavy particle Separator A4 V4 CH
With Uster: Vision shield T1200/4s, Year : 2017
Power: 380V, 50Hz
Condition: running
AE11/020126D/YL-L/F/
Schlafhort X5 Autoconer
Quantity: 2
1x Year: 2013, No of Drums : 60, Type of Feed: Magazine (8 bobbin)
Yarn Clearer: Uster Quantum 3, Measuring Head Type: IMH 030 F30
Steel Drums with 2.0 Turns, Conicity: 5°57′
Traverse: 6″, Air Splicer DZ 3, Waxing, FD Channel
Individual Suction, Downward Hot Air Discharge, OHTC, Suction Motor: 17 kW
1x Year: 2010, No of Drums : 60, Type of Feed: Magazine (8 bobbin)
Steel Drums with 2.0 Turns, Conicity : 5°57′
Yarn Clearer: Uster Quantum 2, Measuring Head Type: IMK C20 F 23 YL
Air Splicer DZ 3, Traverse: 6″, FD Channel, Waxing
Individual Suction, Downward Hot Air Discharge
OHTC, Suction Motor kW : 17
AA23/020126E/OL-AI/F/BY/
Starlinger Starex PP Tape Extruder
Year: 1991, Type: Starex 1000, Power 250 KW; w.width 110 cm; output 770 kgs/8 h shift. Incomplete: missing main motors V1 and V2, gear box and milling attachment. Stopped in warehouse professionally dismantled.
AA23/020126E/ACL-AI/F/BY/
SML Lenzing Coating Line for PP/PE Cloth
Year: 1995, Type: POWER, Power – 150 KW, PP 160kg/h, LDPE 180 kg/h, w/w 1500mm, Complete with accessories, Stopped in warehouse professionally dismantled.
AE11/301225D/TL-L/F/BH/
Rieter C-70 Carding Machines
Year: 2015-2019, Can size: 40”, Chute Feed, Single Licker-in