Showing 651–700 of 1699 resultsSorted by latest

Show sidebar

AA08/270326/AQ

Electronic cone winder SSM mod.Preciflex

with n.48 heads
precicontrol head board, electronic yarn guide
mandrel, precision crossing
pitch 8 “(200 mm), conical tube length 230 mm – diam.internal base 56 mmdiam. tip 30 mm, positive overfeeder
y.o..c. 2003

AA08/270326/AQ

Electronic cone winder SIMET mod.SES/AL series 13/10”

with n.18 heads
pitch 10″ (250 mm) – tube 270 / 280 mm, grooved drum 2.5 turns constant pitch
conicity conical, mechanical clearer, motorized waxing device, positive overfeeder
y.o.c. 2015

AA08/270326/AQ

Electronic cone winder MOTOCONO Mod.S-40

40 heads
pitch 6″ (152 mm) – conicity 5°57, grooved drum 2 turns variable pitch diam.95 mm
meter counter, double waxing device, mechanical clearer
y.o.c. 2006

AA08/270326/AQ

Electronic cone winder CORGHI Mod.RI/36

36 heads
yarn guide, one motor per head, pitch 6″(152 mm) – conicity 4°20′ “C” arm with tailstock
driven waxing device counter rotating, double yarn stretcher, mechanical clearers
stop at required diameter, internal low creel, inverter for speed regulation via potentiometer every 8 heads, overfeeder, single setting meter counter
y.o.c. 2000

AA08/270326/AQ

Electronic cone winder CORGHI mod. BR-36

36 heads – single face, pitch 6″ (152 mm), drum 2,5 turns variable step diam.82 mm, conicity 4°20′ – mandrel
counter-rotating driven waxing device, one yarn brake for each head, mechanical yarn clearers with micrometric control
cone stop at desired diameter, yarn presence sensor CER
Volt 400 three-phase – 50/60 Hz
y.o.c. 2002

AA08/270326/AQ

Electronic cone winder CORGHI mod.BR-36

36 heads – single face, pitch 6″ (152 mm), drum 2,5 turns variable step diam.82 mm
conicity 4°20′ or 5°57’ – arm “C” with tailstock
counter-rotating driven waxing device, one yarn brake for each head
mechanical yarn clearers with micrometric control, cone stop at desired diameter
yarn presence sensor BTSR, variable speed from 300 to 1200 m/min, meter counter, Mesdan ATS system Aquasplicer mod.4923 B
Magitex with sleeve discharge, Volt 400 three-phase – 50/60 Hz
y.o.c. 2003

AA08/270326/AQ

Electronic cone winder CORGHI Mod.BR

36 heads – single side, pitch 152 mm.(6″), grooved drum 2,5 turns variable step diam.82 mm
conicity 5°57′ or 4°20’ – “C” arm with tailstock
counter-rotating controlled Waxing device, one yarn-stretcher each head, mechanical clearer with micrometric check
automatic stop at required diameter, adjustable speed from 300 to 1200 mt./min.
electric Power supply Volt 400/3 -50/60 Hz
y.o.c. 1995

AC86/270326/AQ

SAUER 160-spindle twisting machine, VOLKMANN VTS 08

170-spindle basket, 6 x 4.20 outlet, 6-inch feed.

AD26/260326/

Chenille ring twister

1x -Gigliotti & Gualchieri model EPT2 chenille ring twister, yoc. 1998 ,
64 spindles, with inverter motor , ring diameter 120 mm. ,

2x – Pafa. Multifil chenille ring twister , yoc.2002 / 2003 ,
112 spindles , inverter motor of spindles , ring diameter mm.120 ,

1x – Pafa. Multifil chenille twister, yoc 2002 , n. 120 spindles , in 2024 change motor spindles with new model inverter brand Gigliotti , ring diameter 120 mm.

AB46/260326/

Trutzschler, Carding TC11, TC07, DK803, DK760

2x Model:TC11, Year:2015 (Germany)

5x Model – TC 07, Year 2015 & 2011
DFK 1200 Chute Feed , 24 x 48 can size , 3 lickerin
Can process cotton and cotton blends T-con
480 Volts , 60 Hz

28x Model : DK 803 (Germany)
Year of Manufacture: 1999
Dfk feeder can diam. 1000mm. Coiler kh 950
Can capacity: 3 cans– 1 empty can, 1 full can, 1 can running.
All have their can charger

3x Model: DK 760 (Germany)
Year of Manufacture: 1994

AC32/250326/

Murata Auto Winder Q-Pro

Quantity: 3, Year: 2014, 60 Drum, Magazine.Zenit

AC32/250326/

Murata Auto Winder Q-Pro EX

Quantity: 2
Year: 2019
2x 60 Drum, Magazine
Uster Quantum 3

AC32/250326/BC/

Rieter Draw Frame RSB-D22

Quantity: 3
Year: 2013
18×42″

AB45/250326/BY/

TRUTZSCHLER DK803 CARD, TC03, TC07

AB45/250326E/AC-C/F/BY/

TRUTZSCHLER DK 803 CARD

Quantity: 1, Year: 1996
With CFD and CCD autoleveller, automatic exit can 1.000 mm x 1200mm ( 40” x 48”)
Trutzschler Chute feed, alluminium flat, Webfeed (3 lickerin system), Electronic Baumuller
380 V 50 HZ

AB45/250326E/CY-C/F/BY/

TRUTZSCHLER TC 03 CARD

Quantity: 1, Year: 2003, automatic exit can 1000 mmx 1200 mm ( 40"x48"), Trutzschler Chute feed, alluminium flat, M1 Licker in
380 V 50 HZ

AB45/250326E/RP-L/F/BY/

TRUTZSCHLER TC 07 CARD

Quantity: 1, Year: 2009, automatic exit can 1000 mmx 1200 mm ( 40″x48″), Trutzschler Chute feed,alluminium flat, 1 Licker in
380 V 50 HZ.

AC32/250326/BC/

Murata Auto Winder 21C

Quantity: 1, Year: 2006, 48 drum, Magazine / TK830 Autodoffer.

AC32/250326/BC/

Murata Auto Winder 21C

Quantity: 1, Year: 2008, 60 drum, Magazine / TK940 Autodoffer.

AC32/250326/

Rieter Draw Frame SB-D45

Quantity: 3
Year: 2014
CAN 40×48

AA05/240326D/COI-CI/F/BA

2 x NSC Schlumberger combers mod. ERA

year 2004, ball feeding, can delivery día. 1000×1200 mm.
2 machines require 1×40′ ctr for shipment

AA08/240326/BY

3 Automatic cone winder SAVIO POLAR E PLUS

60 heads each
2 machines with SX head – n.1 machine with RH head
automatic spool loader
h spool 200 to 260 mm
electronic clearers Quantum 3 – O30 F30 head
pitch 6″ (152 mm) – conicity 5°57′
2-turn grooved drum parallel diam.98 mm
drum on.off electronic type anti ribboning device
booster / tensor / tensorflex
Aquasplicer Mesdan mod.4924 E
waxing device
1 automatic doffing trolley
individual basket, floor air exhaust, blower Savio, Volt 380 – 50 Hz
y.o.c. 2012

AA08/240326/BY

Automatic cone winder SAVIO ECO PULSAR (BITWINDER)

for wastes recovery cone
with n.2 heads
feeding from recovery cones
4-position revolver for bobbins diam.maximum 110 mm
pitch 6” (152 mm) – conicity 4°20’
grooved drum with 2 turns variable step
electronic clearers Uster Quantum 3
supplied with n.3 types of Splicer: Mesdan Splicer mod.895B G, Hot Splicer H20 I, Mechanical knotter mod.4102
waxing device
y.o.c. 2020

AA08/240326/BY

Automatic cone winder SAVIO ORION L

56 heads – main unit left side
manual feeding from spool
6-position revolver – exit 6” (152 mm)
conicity 4°20’
grooved drum 2-turn variable step
splicer Mesdan mod.690
Loepfe TK YM ZENIT F CSO yarn clearers
2 automatic cone launchers, 2 automatic doffing trolleys, 3 pneumatic adjustments
doffing bobbin unloading belt
2 empty spool tube unloaders (n.1 Right – n.1 Left)
Magitex, Volt 380/3 – 50 Hz
y.o.c. 2005

AA08/240326/BY

Automatic SAURER/SCHLAFHORST Autoconer 6, with 60 heads

pitch 6” (152 mm) – conicity 4º 20’
automatic bobbin loader + n.2 bobbin preparers on the left
caddy 18-21
electronic yarn clearers Loepfe Yarn Master Zenit
splicer with Prisma DZ3
waxer, FX control, 1 Automatic doffing trolley, blower
y.o.c. 2015

AA08/230326/AQ

Ring spinning machine Zinser Mod.421 E

– n.580 spindles
– ring diam. 51 mm – gauge 82,5 mm
– tube height 260 mm
– automatic doffing
– Electro-Jet blower
– y.o.c. 1992 –
=================
– n.580 spindles
– Pinter system for Lycra – installed new in the year 2023
– ring diam. 51 mm – gauge 82,5 mm
– tube height 260 mm
– automatic doffing
– Electro-Jet blower
– y.o.c. 1992 –

AA08/230326/AQ

Intersecting Sant’Andrea CSN

Intersecting Sant’Andrea CSN
chain head
feeding 10 couplings by cans
exit 2×1 can 700 x 1000
automatic doffing
380/3 volts – 50 Hz
year of manufacture 1999 –

AA08/230326/AQ

Intersecting Gaudino mod. CD14 – CD22

Intersecting Gaudino mod. CD14 – CD22
chain head
feeding 12 couplings by cans
exit 2×2 can 800 x 1200
automatic doffing
380/3 volts – 50 Hz
y.o.c. 2018

AA10/230326/

SCHLAFHORST/SAURER Automatic Winder(BITWINDER)

Quantity: 1, Year: 2005, Type RF 338/4,for rewinding cone ends, 4 carousels, Splicers, automatic change, feeding and Take up cones cylindrical 150 mm

AA10/230326/

1 BIGAGLI Hollow spindle fancy Twister mod. NOVAFIL

yoc 1995, feeding by sliver, 152 spindles, 2 drafts, ring dia. 110 mm., take up tube 450 mm.
1 PAFA Rewinder 24 heads.

AA10/230326/

1 SAVIO Cone to cone winding machine, type ORION L, yoc 2005

56 heads, delivery 6″, fishing knotter (no splicer), Loepfe TK830N clearers, manual feeder, without waxer.

AA08/230326/AQ

Schlafhorst Autoconer 5

Quantity: 1, Year: 2007, 24 heads with bobbin loader, 6” output.
The machines worked until December 22, 2025.
All the relevant cans, finishing tubes, and all spare parts available at the factory will be delivered with the machines.
All the machines are in perfect condition, fully functional, and have always processed 100% wool for weaving sector.

AA10/230326/

1 SAVIO Winder mod.ORION

yoc 2000, 40 heads, delivery 6″, 5°57, double feeder 2 cones magazins, Loepfe TK940 clearers, tube 280 mm., waxer.

AA10/200326E/LL-R/F/AQ

Schlafhorst Cone Winder 338 D 148

Quantity: 1, Year: 2004, 40 heads, delivery 6”, 4°20, Uster Quantum 2 clearers, thermosplicer, waxer, 1 trolley doffer, 2 autom. feeders, tube 265 mm
Machine stopped and still on factory floor

AA10/200326E/YY-C/F/AQ

Schlafhorst Cone Winder 338D

Schlafhorst Cone winder 338D 148
Quantity: 1, Year: 2004, 32 heads, delivery cylindric 6”, Uster Quantum 2 clearers, thermosplicer, waxer, 1 trolley doffer, autom. feeder, tube 265 mm.
Machine stopped and still on factory floor

Schlafhorst Cone winder 338D 148
Quantity: 1, Year: 2006, 32 heads, delivery 6”, 4°20, Loepfe Zenith clearers, thermosplicer, waxer, 1 trolley doffer, automatic feeder, tubes 265 mm.
Machine stopped and still on factory floor

AG52/180326/BS/

Toyota RX240 Ring Spinning Frames LINKED to autoconer

08 x Toyota RX240 Ring Spinning Frames
1104 spindles each – ring Ø 40 mm – gauge 70 mm – year 2000
Equipped with Magitex blower cleaning system

linked with :

08 x Murata 7V-II Cone Winders
24 spindles each – year 2003
Equipped with Uster Quantum 2 yarn clearers (CV 4°20′)
With Magicfil blower cleaning system

01 x Marzoli FT1D Speed Frame (Simplex)
120 spindles – configuration 6 x 16 – year 2002

The machines are currently stopped, but complete and ready to be put back into operation.

AE02/180326E/OS-Y/M/BM/

SSM Winder DP3-C

Quantity: 1, Year: 2013, 40 positions
The machine is complete and in running condition. They were running to the last moment before we dismantled and brought them to warehouse by professional team. There are no additional spare parts with the machine.

AB65/101225E/RS-S/F/BG/

Schlafhorst 338 Autoconer (Cone-Cone Automatic)

Quantity: 1, Year: 2007, Type K, 50 Spindles, Loepfe 840 N, Conicity 5º 57, Feeding Cone to Cone automatic, 2 Piecer, Waxer, 380/50 Hz.
It can work from 10 to 40 Nm Yarn count, It can work Cotton, polyester, acrylic and viscose., The 50 heads can work with different materials at the same speed.
,Running Condition. Shipment requires 1×40; Ctr

AG88/170326E/TOL-LI/M/AS

SAVIO SIRIUS TWISTING

9 PCS. SAVIO SIRIUS TWISTING 251 BF TFO 208 DRUMS, 4x 2018 – 5x 2022.
Bobbin Height: 17CM (suitable with 420 bobbin)
Can Diameter: 18CM
Capacity: 280/300 KG/machine/day
RPM: 9.000
Twist: 550

AA98/201124E/YC-Y/F/AQ/

Savio Geminis 242 C Double Twisting (2×1)

Quantity: 1 , Year: 1996, mod. 242 C, With Nº 220 spindles, Double drive , two independent frames, Package lifting to yarn breaks, Feeding from assembly winder, 8 “ inch ( tube 225 mm.) x diam. 185 mm. Internal diameter basket 200 mm. Delivery 6’’ ( 152 mm. ) x 4º20′, Pneumatic yarn thread in, Blower Electrojet
Inverter to speed set, V 380/50-60 hz, Machine complete in good running condition.

AH27/160326D/RR-L/F/BA

Rieter C60

10 sets rieter C60, can show empty run
Year : 2012 , can size is 1×1.1m , single linkerin
2 machine /40HQ

AF74/130326AS/

COMPLETE REGENERATED ROTOR SPINNING MILL

1 x Balkan complete blowroom for blending with 3 weighing pans Year 2014
6 x Lakshmi LC363 cards Year 2014 & 2015 Can size 1000x1200mm
4 x Lakshimi LDF3 finisher draw frames Year 2014 & 2016
1 x Lakshimi LDA1 finisher draw frame Year 2017
3 x Saurer Schlafhorst BD448 Rotor Spinning Machines Year 2014, 448 rotors, Rotor diam. 43mm
Production: 12-13 tons per a day for NE9/1

AA03/120326/BY/

ZINSER Ring Spinning 319

Zinser 319 LSL, Covemat OG,PK1601, SN 2125, 1981, 600 SPINDLES, 56 RING DIAM, inverter
Zinser 320 LSL, Covemat OG,PK1601, SN 2126, 1981, 600 SPINDLES, 56 RING DIAM, inverter
Zinser 320 L, Covemat OG,PK1601, SN 2247, 1983, 488 SPINDLES, 55 RING DIAM, inverter
Zinser 320 L, Covemat OG,PK1601, SN 2248, 1983, 488 SPINDLES, 55 RING DIAM, inverter

Worsted ring frames with inverter, overhead cleaner, suction and blowing function
Machines are still in running position, very good condition, through regular service according German standards
have run in 2 – 3 shifts, only ca.200 days/year

Note:
The front roller have diameter 32mm.
The machines are in very good condition because just a few years ago as part of an internal reorganization, during which they were overhauled and their ball bearings were replaced. They also come with travelling overhead cleaner, which alone had a original price of €15,000.

AB46/120326D/L.L-A.L/BJ

Breaker Draw frame

2 X Breaker Draw frame:
Make: Rieter
Model: SB D15
Year : 2005
Can size: 40”x45”
Cree Type: Power
No of doublings: 6
Feed can dia: 40”
Suction: Individual
Drafting Type: 4 over 3

AI08/110326D/RO.L-T/F/BA/

REBREAKER, D5-SC600

REBREAKER, D5-SC600 of Itay, refurbished all parts, machine can be shown test running before shipment
this machine looks old, but would be cleaned and refurbished all before shipment, and it will look nice.

AI08/110326D/OS.L-AI/F/BA/

NSC Schlumberger GC15-D5 Rebreaker. HIGH QUALITY

1 x NSC Schlumberger GC15-D5 Rebreaker, Year: 2004,
5 rollers,(it is 144 pcs pin strip) autoleveller, bobbin exit.
Shipping Requirement are: 2×40′ HC.
From tow to top for acrylic fiber.
pneumatic system

AB45/120326/

Rieter G33 Ring Spinning

Quantity: 2, Year: 2000, Model G33 , 1200 spindles, automatic doffing, Gauge mm 70, Ring diameter 42 mm Bobbin Length mm 220, Drafting Rieter Type P3-1, Cradle Size in mm Short – 36, Blower Electrojet, 440V 60 HZ, Condition: Erected till middle of January 22, They are not COMPACT. Condition: Dismantled.

AI55/110326/

Double Twist SAVIO. model TDS 265

176 spindles – double-sided
Pneumatic threading.-Mechanical waxing.-Infeed: 10″ cylindrical tube
Outfeed: 5°, 57″ and 6″ cones.-Basket diameter: 250 mm.-Mobile blower
Year: 1991

AI08/110326D/CYL-CL/F/BA/

Acrylic Fiber Line: TB20 Breaker & GC30-D5 Rebreaker

Quantity: 2 Lines
Include: TB20 and D5GC30
1 x NSC Schlumberger TB20 Breaker, Year: 2012, with chiller, exit can dia 1000×1200 mm.
Machine is in production (Nov 2025)machine can be tested running before shipment.
pneumatic system

1 x NSC Schlumberger GC30-D5 Rebreaker, Year: 2012, 5 rollers,(it is 120 pcs pin strip) autoleveller, bobbin exit.
Shipping Requirement are: 2×40′ HC.
From tow to top for acrylic fiber.
pneumatic system

AI55/110326/

1 Winder SAVIO ESPERO RL

year 2000 – 40 heads – cylinder diam 94 mm 2 ply Loepfe Yarn Master electronic clearers , TK 930H head Mesdan 4941 knotter – waxing device n 2 doffing trolley – sx head/stock – unloading bobbins at the tail travelling cleaner Magitex , automatic bobbin change supplied with Mesdan mechanical knotter set mod. 410.

AA02/110326/AN/

Trutzschler Carding & Saurer Open End Machines

3x TRUETZSCHLER CARDS Type TC 11
Year: 2013(2), 2017 (1), with Drawing Head, Type IDF-R, with autoleveller, with Can changer, Type CC-R, with TRUETZSCHLER CORNERED CARD Cans, Year of manufacture 2010 – 2017, Suitable for TC7 to TC19 cards, Dimensions 920mm x 220mm x 120mm

8x TRUETZSCHLER CARDS Type TC 15
Year: 2017, with Drawing Head, Type IDF-R-II, with Can changer, Type CC-R, with auto leveller, TRUETZSCHLER CORNERED CARD Cans, Year of manufacture 2010 – 2017
Suitable for TC7 to TC19 cards, Dimensions 920mm x 220mm x 120mm.

5x SAURER OPEN END SPINNING MACHINES Type ACO 8
Year 2012(1),2014(2), 2015(2), 216 Pos. Rotor dia. 33 mm, Spin box SE 20, Corolab Yarn Clearers, Type XF, with Foreign Fibre detection, Face Plate Type 31, Opening Rollers Type B 174 DN, Informator OSC with Touchscreen and USB, Conometer, Automatic Package Lift with, Neuenhauser Cone Transport, DIGI Piecing, (1) 4 Doffers, (4) 2 Doffers, Multilot 3 System.

3x SAURER OPEN END SPINNING MACHINES Type ACO 9
Year 2018, 216 Pos., Rotor dia. 31 mm, Corolab Yarn Clearers, Type XF, with Foreign Fibre detection, Face Plate Type 31, Opening Rollers Type B 174 DN, Informator OSC with Touchscreen and USB, Conometer, Automatic Package Lift with, Neuenhauser Cone Transport, DIGI Piecing, 2 Doffers, Multilot 3 System.

1x SAURER OPEN END SPINNING MACHINE Type ACO 8
Year 2011, Upgraded in 2017 to AC10 Software, With 10% energy savings, 408 Pos., Rotor dia. 33 mm, Rotor type TB 633 B, Spin box SE 20, Corolab Yarn Clearers, Type XF, Face Plate Type 31, Opening Rollers Type B 174 DN, Navel Type Spirit R, Informator OSC with Touchscreen and USB, Conometer, Traverse Motion System (Tooth Belt), Automatic Package Lift, 4 Doffers, DIGI Piecing, Waxing device 75 mm x 45 mm, Green Torque Stop, Angle of Wind 26-44 deg, Cradle Pressure 0-60 N, with Multilot 3 & Sampling System.

AB46/090326D/RA-T/C/

ICBT Twisters

Quantity: 4, Year: 1999, Type Machine: DT 350 EH, 96 positions each , Twist 150 – 500d, Supply pack max diameter of 8.5”, Volts: 3 x 575 (600v), 4 machines require 6 ctrs for shipment.

AF74/050326E/LL-L/F/AS/

7 x Saurer SC6 Carding Machines

Year 2022/2023
Width 1380mm
Automatic coiler
Can size 1000x1200mm
Continous suction
Single linkerin
Universal wires