Showing 501–550 of 1699 resultsSorted by latest

Show sidebar

AE07/020626/AS/

Barmag Texturizing

Quantity: 6

NO: 1 (E6)
Model: EFK-PA

Year: 2014
No of sections: 20
No spindles per section: 12
Total spindles: 240
Take up sustem: ATT
No of heaters: 1
Oil application system located in the take-up section
Lycra feed motors positioned opposite the machine

NO: 2 (E7)
Model: EFK-PES

Year: 2015
No of sections: 22
No spindles per section: 12
Total spindles: 264
Take up sustem: CAM
No of heaters: 2
Mechanical traverse-shaft take-up system
Lycra feed motor mounted on top of the machine

NO: 3 (E8)
Model: EFK-PET

Year: 2015
No of sections: 22
No spindles per section: 12
Total spindles: 264
Take up sustem: CAM
No of heaters: 2
Mechanical traverse-shaft take-up system
Lycra feed motor mounted on top of the machine

NO: 4 (E9)
Model: EFK-PET

Year: 2016
No of sections: 22
No spindles per section: 12
Total spindles: 264
Take up sustem: CAM
No of heaters: 2
Mechanical traverse-shaft take-up system
Lycra feed motor mounted on top of the machine

NO: 5 (E10)
Model: EFK-PET

Year: 2018
No of sections: 22
No spindles per section: 12
Total spindles: 264
Take up sustem: ATT
No of heaters: 2
Lycra feed motor mounted on top of the machine
Equipped with Hot Pin
Equipped with doubling creel
“Hot-Pin component for yarn with special effects on E10”

NO: 6 (E11)
Model: EFK-PA

Year: 2022
No of sections: 22
No spindles per section: 12
Total spindles: 264
Take up sustem: CAM
No of heaters: 1
Oil application system located in the take-up section
Lycra feed motors positioned opposite the machine

All Machines:
Cross section Type: V
Maximum speed of machine M/min: 1200
Range of denier can be processed: 40-300
Elasthane covering device (Lycra): YES
Doffing system: Manual
Yarn threading: Manual
Yarn feeding: Godet
Twist element: Friction disc
friction disc type: Z
Friction dic drive: Common Tangential belt
Yarn quality, tension: uniten sensor
Uniten sensor link with Creel: NO
Yanrn interlace /intermingling: YES
Length of heater 1: 200 cm
Length of heater 2: 150 cm
Heating type: Dowtherm
Cooling type: Rail
Cooling length: 110
Maximum package stroke: 250 mm
Maximum package diameter: 250 mm

Some spare parts may come with some of the machines, but there is not much to list.
All in production.

AA98/030626E/RY/C/AQ/

Pafa Fancy Yarn Twistings

Quantity: 2, Year: 2005-2006, model Legafil, ­Main unit left, N.30 spindles each, Electronic main unit, COAX MULTIFIL programmer, Feeding from sliver, Double draft, Hollow spindle, Ring diam.140 mm, H.tube 450 mm, Base internal diam.58 mm – tip internal diam.48 mm.

AA98/270526E/CR-C/F/AQ/

NSC Vertical Gill Box GV10

Quantity: 1, Year: 1990, With n. 02 vertical heads, Draft by rubbers rollers and apron, Delivery 2 slivers / 2 cans ( 1 sliver each can ), Cans dimension 700 x 12000, With automatic cans doffing, Feeding creel 16 coupling by cans, Volt 380 , Hz 50.
Machine in excellent condition of maintenance.

AA08/050626E/LR-Y/F/AQ/

NSC Schlumberger GV20M

NSC Schlumberger GV20M
QUANTITY: 1
YEAR: 2003
EXIT 4 SLIVERS/2 CANS
ELEATING STAPLE (NOT FALLER)
CAN 800 X 1200
Machine has 4 heads, Heads are APRONS SYSTEM (MODEL GV20 M)
The GV20 M model features a 4-head apron drafting system (opposed to the pin drafting GV20 A model), using positively driven double aprons and control barrels to handle fine and delicate fibers.
MACHINE IN VERY GOOD CONDITIONS.
INSTALLED IN THE MILL (SEE TECH INFO ON THE LINK)

AB45/040626/AQ/

Rieter E30 Unilap

Quantity: 1, Year:1998, 02 Creel in alimentation for cans 20/24”, 12 doubling Total doubling n° 24, Exit Tube 200*300 MM, Volt 380 50 Hz.
Condition: Dismantled

AE07/020626/AS/

Ratti Single-Ply Twisters

Quantity: 2, Year: 1995, 160 positions each, Spindle pot diameter: 130 mm, Twisting packages of 2–3 kg.

AE07/020626/AS/

Ratti Double-Ply Twisters

Quantity: 7, Year: 6×1998-1×2003, 140 positions each.

AA10/030626E/CS.L-C.L/F/AQ/

PAFA Hollow Spindle Fancy Twister

Quantity: 1, Year: 2000, mod.EXPO, 30 spindles, 2 drafting systems, take up tube 8″
Machine stopped March 10.2026

AC11/020626/CW/

Complete Open End Line 4840 Spindles

1x Line⁠ ⁠Truzsthler blow room
⁠Year : 2017, ⁠Blendomat – width : 2300mm, ⁠⁠Model : A2300, ⁠⁠T-SCAN: TS-T5, ⁠⁠Model : SP-FPU, ⁠⁠Cleaner – CL-C3, ⁠⁠Mixer – MX-U 10, ⁠⁠Pre-cleaner: CL-P (year: 2019), ⁠⁠Separator: SP-MF, ⁠⁠Separator : SP-DX, ⁠⁠Power : 380V, 50Hz.
⁠ ⁠⁠
13x Truzsthler card
⁠Year : 2017/9, ⁠Model : TC15, ⁠IDF2Type, ⁠Auto leverler, ⁠⁠3linkers, ⁠⁠Power 380V, 50Hz, ⁠⁠Condition : stop.

3x ⁠Schlafhorst Saurer Open end Semi automatic
⁠⁠Year : 2017, ⁠⁠Model : BD480, ⁠⁠480rotors, T34, ⁠⁠No yarn clearer, ⁠⁠No auto doffing, ⁠⁠No waxing device, ⁠⁠Cotton opener roller, ⁠⁠OHCT, ⁠⁠Measuring device, ⁠⁠EMerson inverter, ⁠⁠Power: 380V , 50Hz.

2x Schlafhorst Saurer ⁠⁠⁠Open end Semi automatic
⁠⁠Year : 2018, ⁠⁠Model : BD7, ⁠⁠600rotors, T34, ⁠⁠No yarn clearer, ⁠⁠No auto doffing, ⁠⁠No waxing device, ⁠⁠Cotton opener roller, ⁠⁠OHCT, ⁠⁠Measuring device, ⁠⁠EMerson inverter, ⁠⁠Power: 380V , 50Hz.

2x Rieter Open end Semi automatic
⁠⁠Year : 2016, ⁠⁠Model: R35, ⁠⁠500rotors, T34, ⁠⁠No yarn clearer, ⁠⁠No auto doffing, ⁠⁠No waxing device, ⁠Cotton opener roller, ⁠⁠OHCT, ⁠⁠Measuring device, ⁠⁠EMerson inverter, ⁠⁠Power: 380V , 50Hz.

2x Rieter Open end Semi automatic
⁠⁠Year : 2019, ⁠⁠Model: R36, ⁠⁠600rotors, T34, ⁠⁠No yarn clearer, ⁠⁠No auto doffing, ⁠⁠No waxing device, ⁠⁠Cotton opener roller, ⁠⁠OHCT, ⁠⁠Measuring device, ⁠⁠EMerson inverter, ⁠⁠Power: 380V , 50Hz.

2x Lines ⁠China Jingya – Centralling multi filter
⁠Year : 2017, ⁠⁠Power : 380V, 50Hz.

⁠⁠Condition: stop

AC11/020626/CW/

Complete Open End Line 5840 Spindles

1x Line ⁠Truzsthler blow room:
⁠Year : 2017, ⁠Blendomat – width : 2300mm, ⁠⁠Model : A2300, ⁠⁠T-SCAN: TS-T5, ⁠⁠Model : SP-FPU, ⁠⁠Cleaner – CL-C3, ⁠⁠Mixer – MX-U 10, ⁠⁠Pre-cleaner: CL-P (year: 2019), ⁠⁠Separator: SP-MF, ⁠⁠Separator : SP-DX, ⁠⁠Power : 380V, 50Hz.
⁠⁠
7x Truzsthler card
⁠Year : 2017/9, ⁠Model : TC15, ⁠IDF2Type, ⁠Auto leverler, ⁠⁠3linkers, ⁠⁠Power 380V, 50Hz, ⁠⁠Condition : stop.

3x Schlafhorst Saurer ⁠Open end Semi automatic:
⁠⁠Year : 2017, ⁠⁠Model : BD480, ⁠⁠480rotors, T34, ⁠⁠No yarn clearer, ⁠⁠No auto doffing, ⁠⁠No waxing device, ⁠⁠Cotton opener roller, ⁠⁠OHCT, ⁠⁠Measuring device, ⁠⁠EMerson inverter, ⁠⁠Power: 380V , 50Hz.

2x Schlafhorst Saurer ⁠⁠⁠Open end Semi automatic:
⁠⁠Year : 2018, ⁠⁠Model : BD7, ⁠⁠600rotors, T34, ⁠⁠No yarn clearer, ⁠⁠No auto doffing, ⁠⁠No waxing device, ⁠⁠Cotton opener roller, ⁠⁠OHCT, ⁠⁠Measuring device, ⁠⁠EMerson inverter, ⁠⁠Power: 380V , 50Hz.

2x Rieter Open end Semi automatic:
⁠⁠Year : 2019, ⁠⁠Model: R36, ⁠⁠600rotors, T34, ⁠⁠No yarn clearer, ⁠⁠No auto doffing, ⁠⁠No waxing device, ⁠⁠Cotton opener roller, ⁠⁠OHCT, ⁠⁠Measuring device, ⁠⁠EMerson inverter, ⁠⁠Power: 380V , 50Hz.

4x Rieter Open end Semi automatic:
⁠⁠Year : 2017, ⁠⁠Model: R35, ⁠⁠500rotors, T34, ⁠⁠No yarn clearer, ⁠⁠No auto doffing, ⁠⁠No waxing device, ⁠⁠Cotton opener roller, ⁠⁠OHCT, ⁠⁠Measuring device, ⁠⁠EMerson inverter, ⁠⁠Power: 380V , 50Hz.

Some of the machines are in production. Machines are good quality.

AB54/020626/AG/

RIETER COMBER E72

Quantity: 6, Year 2001, can delivery 24″x1200mm, Tension 380V-50Hz, Status: Running

AA10/030626E/AII-L/F/AQ/

FOR Wool Card

Quantity: 1, Year: 1985, updated in 2002, mod.HL 2500, width 2500 mm., composed of:Scale feeder, 1st drum dia.1508 mm. with 5 workers.2 Morell, 2nd drum dia.1508 mm. with 5 workers.Doffer dia.1278 mm.Delivery 1 can 1000 x 1200 mm., 1 slive

AF74/010626/

Volkmann Two-for-One Twisting Machines

Quantity: 2 , Year: 2005, Model VTS09-0-S, 192 spindles each, Inverter, Pot heigth 150mm, Pot diam. 145mm

AF74/010626/

SSM Doubler

Quantity: 1, Year: 2005, Model DP1-D, 25 positions, 2 ply, Lycra feeder, OHTC

AI08/010626D/ATL-AL/M/BA/

OCTIR Dragon-Multitrave Worsted Wool Carding

Quantity: 3, Year: 2007, Model: Dragon-Multitrave, Working Width: 3.5 meters, Configuration: CL/SS specification, Condition: Fully operational, It is still unpacked and under installation at factory. Condition: Fully operational, machines originally purchased new and imported from Italy and since then are in production in same factory.
Application: Worsted wool top production

AA98/010626/BS/

PAFA Fancy Yarn Twisting

Quantity: 2, Year: 1998, mod. LEGAFIL S, nr. 144 spindles each one , hollow spindle , electronic programmer to set fancy effects, Feeding by tapers from cans or slivers from rubber finisher bobbins , and yarn with external creel , Sampre simple draft , ring diam. 115 mm. , traverse 150 mm. , tube height 450 mm.
Split sale possible.
Machines are complete, in very good condition of maintenance, No Broken or missing parts.
Supply includes: about N. 500 plastic spindles tubes each machine.

AA10/010626/

Open End Spinning Line with 1008 Spindles

Comprising:
1x UNIFLOC SAURER JINTAN JSB008C (2024)
3x TRUTZSCHLER PWSE 1200 weighing feeders (1995)
1x RIETER FO1000 hopper feeder (1995)
1x RIETER B3/4 Hopper feeder
1x UNIFLOC SAURER JINTAN FA008B year 2016
2x TRUTZSCHLER weighing hopper feeders
1x TRUTZSCHLER blending machine
1x RIETER B3/3R hopper feeder year 1988
1x UNIFLOC SAURER JINTAN FA008E year 2017
1x TRUTZSCHLER PWSE 1200 weighing feeders year 1992
1x RIETER B3/4 hopper Feeder year 1996
1x TRUTZSCHLER BO1200 weighing hopper feeders year 1992
1x TRUTZSCHLER FM opener year 1992
2x TRUTZSCHLER DK903 cards year 2000
2x TRUTZSCHLER DK803 cards year 1999
2x TRUTZSCHLER DK803 cards year 1997
1x RIETER RSB-D 35 draw frame year 2002
3x RIETER RSB-D 30 draw frames year 1998, 1999, 2001
2x SAURER AUTOCORO 8 open-end spinning frames, 360 spindles each, 2013, 2014
1x SAURER AUTOCORO 8 open-end spinning machine, 288 spindles, year 2012
1x ORWAK COMPACTOR 3325 bale press year 2023
1x SIAT AF3CF145613 film palletizer year 1986
1x NOBLEFIT PSE12N applicator year 2023
1x FILCONO winder
+ Compressors, forklifts & pallet trucks

AI08/010626D/ACP.L-AI/F/BA/

NSC Schlumberger Era Combers

Quantity: 2, Year: 2004-2006.
the feeding creel is 24 ends bobbin condition, it also can feed by can surely if you want.
the delivery can is 1000*1200mm;
the machine can run if customer inspect.

AF74/010626E/AAI-AI/F/AS/

Fehrer Dref 3 Spinning Machines

Quantity: 2, Year: 1995 & 1998, 12 spindles each, 6” cylindirical take up, Feeding creel, Stopped on mill floor, but ready to run.
A short video of one spindle in working condition is enclosed. Machines worked Recycled Polyester and Cotton and can work many other fibers.

AH82/010626D/COL-CL/F/BC/

Barmag-Saurer Model Tex-Cocoon(Site A)

Quantity: 1
Year 2007
240sp
Inverter type
Manual-doffing
Two Heaters
Equipped with ‘Full Lycra Device’

Additional tech details:
1- The machine is 2 sides, it means side A and side B, separately, LH+RH.
2- The machine JETS are Heberlein brand
3- INVERTER,
There are two typed of driving system as below:
(1). Individual Spindle Drive (e.g., Barmag FK, EFK, E-AFK, etc.) Structure and Control: Each spindle is driven individually by
a disc motor and controlled by an inverter (frequency converter).
The inverter regulates the rotation speed and torque for each spindle separately.
(2). Belt-Driven System (e.g., Murata 33H) Structure and Control: All spindles are driven by a single motor through a common belt system.
Speed is uniform across all spindles and is controlled by the main motor speed.

4- The RANGE OF DENIERS that these machines do range from 30 to 300d.
(1). Factory where the machine is mostly producing 75d and 150d, specially 300d.
for example 850rpm x 150d x 288sp x 24h x 60 min. / 9,000 / 1,000 = 5,875.2 Kg x 30 days = 176,256Kg monthly per machine 288sp.
(2). With S-Z function(double disc), possible to produce 600d.
(In case of production for 600d with 300d by S-Z function,
productivity is 1.8 times higher than standard operation)
(3). In case of production with lycra device, productivity will be
decreased by 10 to 15%.

5- machine is made in China by Barmag of Germany
6- This machine is in a SITE called SITE [A] and is in full running in excellent condition.
7- Machine can be inspected under power

AA03/310526/BY/

Schlumberger ERA Combers, “SUPER HIGH QUALITY”

Feeding of all: 24 slivers, 12 cans
Delivery of all: 1 silver in Can 1.000×1.200mm
all Staedler+Uhl combs
all: 2004
=====
NOTE: 2 OF THESE SOLD, 2 AVAILABLE
=====
NSC Comb 1 Type: ERA40
NSC Comb 2 Type: ERA40
NSC Comb 3 Type: ERA40
NSC Comb 4 Type: ERA40

AB46/290526/

Rieter C70 Carding

Quantity: 6

2x Rieter C70L Cards:
Year: 2017-2018, Chute Feed: C70L, Can Size: 40” x 47”, Waste Collection: Continuous / Upwards, Licker-in: 1, Stationary Flats: Front 2 / Back 4

4x Rieter C70 Cards:
Year: 2012-2013-2015, Licker-in: Single, Delivery Can Size: 1000 x 1200 mm, Linear Can Changer (Recessed Floor Type)

AA02/280526/

RATTI Two For One Twister

Quantity: 1, Year: 2015, With fusion heaters, Model: 325NF-B – Sewing Thread, 64 position – 32 per side, 220mm pot diameter, 200mm pot depth, With separate cone holder for low melt yarn at each position, Hot melt heater nozzles for fusion and high twist sett, 170mm Tube take up.

AC06/290526E/TS-Y/AQ/

NSC GV20A Gill Box

Quantity: 1
Year: 1999
4 sliver 2 can
2 heads faller, can 800×1000. Still in working conditions
(((Delivery December 2026))

AB45/290526D/AP-R/F/AQ/

Saurer Assembly Winder

Quantity:1, Year: 2003, Type: HDWR, no. 12 spindles , 4 ply with sensor automatic counter, blower, 380 V 50 Hz, Delivery: immediate , Condition:Dismantled

AI08/270526/

NSC GC13 Preparation Line

for wool and wool-blend yarn production.

1. Blending Gilling : Ball input, can output, fitted with an oiling device for uniform fiber processing.
2. Leveling Gilling: Can input, can output, equipped with an autoleveller for consistent sliver evenness.
3. Finishing Gilling: Can input, combines 2 slivers into 1 can.
4. Multi-output Gilling: Can input, combines 4 slivers into 2 cans.

All machines have passed full inspection and rigorous testing. This well-maintained line is ready for immediate deployment, with a proven track record of stable performance and reliable operation in worsted spinning processes.

AE42/250526D/TA-A/F/

NSC Finisher FMV 32

Quantity: 1, Year: 1994, with 20 heads

AE42/250526/

NSC GC15

Quantity: 1, Year: 1997, 1 sliver 1 can with auto can changer, Can size 1000×1200, Head 270 cm, Creel 12 ends

AB74/260526E/SP-P/F/AO/

Volkmann CarpetTwister / CarpetCabler

Quantity: 1, Year: End of 2017, Type: VTS-05-0-F / VTS-05-0-C-F, Series: 8.02
Configuration
Number of spindles: 160, Number of sections: 20, Spindle gauge: 445 mm, Balloon limiters: without, High energy saving spindle E-260
Overall dimensions
Overall length: approx. 39.77 m, Overall width: approx. 1.50 m, Overall height: approx. 2.69 m
Technological data
Material: 100% PP, Range of counts: dtex 1200 – dtex 3800
Range of twist:Up-twisting: 40 – 710 t/m, Cabling: 20 – 355 t/m, Twist direction: S + Z
Untwisted yarn (feed packages)
Package type: cylindrical feed packages
Traverse: 10″ (254 mm), Tube length: 290 mm, Inside diameter of tube: 73 mm, Maximum outside diameter: 260 mm
Net yarn weight (approx., depending on yarn quality and package density): 5.0 kg
Twisted yarn (take-up)
Package type: cylindrical cross-wound bobbins
Traverse: 10″ (254 mm), Tube length: 290 mm, Inside diameter of tube: 73 mm
Maximum outside diameter (approx.): 350 mm
Main drive
Driven by two short-circuit squirrel-cage induction motors (one motor per machine side) with frequency inverter
Output: 2 × 37 kW, Voltage: 220/380 V, 3 phases, 50 cycles (to be confirmed in case of order)
Full motor capacity achievable if installation height does not exceed 1000 m above sea level and ambient temperature does not exceed 40°C
Electrical control
Electrical control located in the switch gear cabinet
Reversion of twist direction from S to Z manually
Drive connected via intermediate drive onto two main drive shafts, located in front of the spindles for easy access
Spindle speed controlled by frequency inverter
Terminal displaying spindle revolution, delivery speed, turns per metre and crossing angle
Spindle drive
Individual spindle drive by endless tape with 180° contact to spindle whirl, easily exchangeable
Tape tension released when spindle is stopped
No mechanical friction between tape and drive pulley due to air cushion
Gear section
One individual gear per side
Gear drive for adjusting: Turns per metre
Take-up tension (pre-take-up), Angle of crossing of take-up packages
Special cam-driven traverse motion for high-speed take-up, including anti-patterning device
Volkmann spindle (two-for-one and cabling spindle)
Maintenance-free spindle, rigidly fixed to spindle rail, with two yarn channels:
One for two-for-one twisting, One for direct cabling
Spindle rotor statically and dynamically balanced
Reserve discs with anti-wrap collar to avoid yarn wraps around the whirl in case of ends down
Stationary protection pot held by permanent magnets with tension device
Separators between individual spindles
Machine equipped with Volcojet
Machine without balloon limiters
Take-up
Adjustable pre-take-up per machine side to vary take-up tension and package density
Adjusting range: 60%, Traversing thread guides, self-threading, fixed on traverse rod
Drive of packages by friction rollers
Pivotable balloon thread guides with enclosed ceramic eyelet, height adjustable per section
Device for producing hard and soft packages
Cradle
Swivelling, spindleless four-bar cradle with special pressuring device to ensure uniform density throughout package diameter
Centering discs for take-up tubes, simple ball-and-socket type bearing, easily exchangeable for different tube dimensions
Machine colours
Textured paint, Principal colour: Light grey NCS S 0510-R90B
Secondary colours:Traffic grey B NCS S 7502-B, Red NCS S 1080-Y90R, Anthracite grey NCS S 8502-B

Note: Machine is professionally dismantled, packed and warehoused by Volkmann technicians. with energy reduction

AH82/250526D/RPL-RL/F/BC/

Oerlikon-Barmag Model “EAFK”(Site A)

Quantity: 1
Year 2012
288sp
Inverter type
Auto-doffing.
Two Heaters.

Additional tech details:
1- The machine is 2 sides, it means side A and side B, separately, LH+RH.
2- The machine JETS are Heberlein brand
3- INVERTER,
There are two typed of driving system as below:
(1). Individual Spindle Drive (e.g., Barmag FK, EFK, E-AFK, etc.) Structure and Control: Each spindle is driven individually by
a disc motor and controlled by an inverter (frequency converter).
The inverter regulates the rotation speed and torque for each spindle separately.
(2). Belt-Driven System (e.g., Murata 33H) Structure and Control: All spindles are driven by a single motor through a common belt system.
Speed is uniform across all spindles and is controlled by the main motor speed.

4- The RANGE OF DENIERS that these machines do range from 30 to 300d.
(1). Factory where the machine is mostly producing 75d and 150d, specially 300d.
for example 850rpm x 150d x 288sp x 24h x60 min. / 9,000 / 1,000 = 5,875.2 Kg x 30 days= 176,256Kg monthly per machine 288sp.
(2). With S-Z function(double disc)/double friction, possible to produce 600d, but only by 144 spindles with disc control (so production quantity is increased but not doubled, best guess is %50 higher than standard production)
(In case of production for 600d with 300d by S-Z function,

(3). In case of production with lycra device, productivity will be
decreased by 10 to 15%.

5- machine is made in China by Barmag of Germany
6- This machine is in a SITE called SITE [A] and is in full running in excellent condition.
7- Machine can be inspected under power

AH82/250526D/ARC-AC/F/BC/

Oerlikon Barmag EFK Texturizing(Site B)

Oerlikon Barmag EFK Texturizing(Site B)
Quantity: 1
Year 2011
240sp
Model EFK
Two heaters
Inverter type, Manual-doffing

Additional tech details:
1- The machine is 2 sides, it means side A and side B, separately, LH+RH.
2- The machine JETS are Heberlein brand
3- INVERTER,
There are two typed of driving system as below:
(1). Individual Spindle Drive (e.g., Barmag FK, EFK, E-AFK, etc.) Structure and Control: Each spindle is driven individually by
a disc motor and controlled by an inverter (frequency converter).
(each spindle is driven individually by a disc motor and controlled by an inverter. The inverter regulates the rotation speed and torque for each spindle separately).

(2). Belt-Driven System (e.g., Murata 33H) Structure and Control: All spindles are driven by a single motor through a common belt system.
Speed is uniform across all spindles and is controlled by the main motor speed.

4- The RANGE OF DENIERS that these machines do range from 30 to 300d.
(1). Factory where the machine is mostly producing 75d and 150d, specially 300d.
for example 850rpm x 150d x 288sp x 24h x60 min. / 9,000 / 1,000 = 5,875.2 Kg x 30 days= 176,256Kg monthly per machine 288sp.
(2). With S-Z function(double disc), possible to produce 600d.
(In case of production for 600d with 300d by S-Z function,
productivity is 1.8 times higher than standard operation)

– Possible S-Z function double friction but only by 120 spindles effect with disc control (so production quantity not doubled but %50 higher)

(3). In case of production with lycra device, productivity will be
decreased by 10 to 15%.

5- machine is made in China by Barmag of Germany
6- This machine is in a SITE called SITE [B] and is partially working only, because they decided to stop soon machine by machine.
7- Machine can be inspected under power

AJ14/220526/AS/

Blowroom Line

1x Trutzschler BDT19, Year: 1996
1x Trutzschler CONDENSER VERTICAL TOWER, Year: 1993
1x BALKAN BALE OPENER, Year: 1997
1x BALKAN ANGLED OPENER
1x BALKAN MPMS, Year: 2009
1x AKM MAKINA DOUBLE CASE FULLY AUTOMATIC PRESS, Year: 2021

AJ14/220526/AS/

Blowroom Line

1x Trutzschler BOA 1200, Year: 1996
1x HERGET EDGE ACTOR (1400)
1x Trutzschler AFC, Year: 1991
1x Trutzschler MPM 8/1200, Year: 1991
1x BALKAN ADDITIONAL CONDENSER
1x TTE-MTT2 MAGNET, Year: 2018
1x TTE-MTT2 MAGNET, Year: 2018
1x KAVURLAR DOUBLE CASE FULLY AUTOMATIC PRESS, Year: 2007

AJ14/220526/AS/

Trutzschler Blowroom Line

1x Trutzschler BDT19, Year: 1996
1x ARGEMA MIKNATIS, Year: 2015
1x Trutzschler BOA 1600, Year: 1996
1x Trutzschler AFC, Year: 1996
1x Trutzschler CVT3, Year: 1996
1x Trutzschler DX, Year: 1996
1x Trutzschler MPM 10/1200, Year: 1996
1x Trutzschler CVT3, Year: 1996
1x Trutzschler DX, Year: 1996
1x BALKAN STRAIGHT TOWER INCLINED EXAMINER Year: 2003

AJ14/220526/AS/

Trutzschler TD2 & TD7 & TD8 Drawing Frame

Quantity: 8
3x Trutzschler TD7, Year: 2014
1x Trutzschler TD2, Year: 2009
4x Trutzschler TD8, Year: 2014

AJ14/220526/AS/

Trutzschler DK803 & Saurer SC6 Cards

5x Trutzschler DK803, Year: 1996
7x SAURER-AUTOCARD SC6, Year: 2023

AJ14/220526/AS/

Rieter 440 IG Open End

Quantity: 8, Year: 3×2006-5×2007

AJ14/220526/AS/

Open End Spinning Line

Trutzschler Blowroom:

1x Trutzschler BOA 2300 BLENOOMAT, Year: 2007
1x Trutzschler SP-MF METAL & FIRE DETECTOR, Year: 2007
1x Trutzschler CL-P PRE-CLEANER, Year: 2007
1x Trutzschler CONDENSER, Year: 2007
1x Trutzschler MX-I-10 MIXER, Year: 2007
1x Trutzschler CL-C3 CVT, Year: 2007
1x Trutzschler SP-FPU Foreign Part Separator, Year: 2015
1x Trutzschler SP-F SECOROMAT, Year: 2007
1x Trutzschler BR-COI CONDENSER, Year: 2007
1x Trutzschler BR-COI TABLE, Year: 2007

1x Trutzschler CL-P PRE-CLEANER, Year: 2015
1x Trutzschler CONDENSER, Year: 2015
1x Trutzschler MX-I-10 MIXER, Year: 2015
1x Trutzschler CL-C3 CLEANER, Year: 2015
1x Trutzschler SP-FPO SECOROMAT, Year: 2015
1x Trutzschler BR-COI CONDENSER, Year: 2015
1x Trutzschler BR-COI TABLE, Year: 2015

Trutzschler Carding:
7x Trutzschler TC03 CARDING, Year: 2007
5x Trutzschler TC7 CARDING, Year: 2011

Trutzschler Drawing Frame:
3x Trutzschler TD03 DRAWING FRAME, Year: 2007, I PASSAGE
1x Trutzschler TD02 DRAWING FRAME, Year: 2011, I PASSAGE
3x Trutzschler TD03 DRAWING FRAME, Year: 2007, II PASSAGE
1x Trutzschler TD03 DRAWING FRAME, Year: 2011, II PASSAGE
1x Trutzschler TD7 DRAWING FRAME, Year: 2014, I PASSAGE
3x Trutzschler TD7 DRAWING FRAME, Year: 2015, I PASSAGE

Schlafhorst Open End:
5x Schlafhorst Open End SE12, Year: 2007, 480 rotor
2x Schlafhorst Open End SE12, Year: 2011, 480 rotor
2x Schlafhorst Open End ACO9, Year: 2015, 480 rotor (MULTI LOT 3)

AJ14/220526/AS/

Trutzschler Cotton Ring Spinning Line

Trutzschler Blowroom:
Year: 2005
1x Trutzschler BO-A 2300
1x Trutzschler BO-U
1x Trutzschler CLP
1x Trutzschler SP-EM
1x Trutzschler MX-U 10
1x Trutzschler CL-C4
1x Trutzschler CL-C4
1x Trutzschler FD-O
1x Trutzschler FD-O
1x Trutzschler SP-F
1x Trutzschler SP-F
1x Trutzschler HALLAC BOARD
1x Trutzschler COMB BOARD

Carding:
13x Trutzschler TC03, Year: 2005

Drawing Frame:
2x Trutzschler HSR 1000, Year: 2003
8x Trutzschler TD03, Year: 2005

Roving Frame:
5x Zinser FL670, Year: 2005

Unilap & Combing:
1x Rieter E32 UNILAP, Year: 2004
6x Rieter E72 JERSEY, Year: 2004

Ring Spinning Frame:
3x Zinser RM351, 1488 Spindles, Ring Diam. 38mm, LYCRA AVAILABLE, Year: 2005
9x Zinser RM351, 1344 Spindles, Ring Diam. 50mm, LYCRA AVAILABLE, Year: 2005

Linked to Winders:
3x Savio Orion I, 32 spidles, Year: 2005
9x Savio Orion I, 36 spidles, Year: 2005

AJ14/220526/AS/

Trutzschler Cotton Ring Spinning Line

Trutzschler Blowroom:
Year: 2004
1x Trutzschler BDT 019/2300
1x Trutzschler BX+E
1x Trutzschler CL-P
1x Trutzschler SC
1x Trutzschler MPM10/1600
1x Trutzschler CXL-3/1600
1x Trutzschler SCFO
1x Trutzschler CXL-3/1600
1x Trutzschler SCFO
1x Trutzschler EAS PANOSU
1x Trutzschler TARAK PANOSU
1x Trutzschler TV FAN
1x Trutzschler TV425
10x Trutzschler LVSA
3x Trutzschler TVK FAN

Carding:
12x Trutzschler TC03, Year: 2004

Drawing Frame:
10x Trutzschler TD03, Year: 2004

Roving Frame:
3x Zinser FL670, Year: 2003
1x Zinser FL670, Year: 2004

Unilap & Combing:
1x Rieter E32 UNILAP, Year: 2004
1x Rieter E35 OMEGALAP, Year: 2010
6x Rieter E76 JERSEY, Year: 2010
4x Rieter E72 JERSEY, Year: 2004

Ring Spinning Frame:
3x Zinser RM351, 1488 Spindles, Ring Diam. 38mm, LYCRA AVAILABLE, Year: 2004
11x Zinser RM351, 1488 Spindles, Ring Diam. 38mm, Year: 2004

Linked to Winders:
14x Savio Orion I, 32 spidles, Year: 2004

AJ14/220526/AS/

Rieter Cotton Ring Spinning Line

Rieter Blowroom:
Year: 2011
1x Rieter A11 Unifloc
1x Rieter Pn.Fibre Conv
1x Rieter B12 Uniclean
1x Rieter TVS Jossi Comboshield
1x Rieter B72 Unimix
1x Rieter B72 Unimix
1x Rieter A79 Unistore
1x Rieter A79 Unistore
1x Rieter Jossi Magiceye
1x Rieter Jossi Magiceye
1x Rieter A21 Condeser
1x Rieter A21 Condeser

Carding:
14x Rieter C60, Year: 2011

Drawing Frame:
4x Rieter SBD-45, Year: 2011
5x Rieter RSB-D-45, Year: 2011

Combing:
1x Rieter E35 Omegalap B, Year: 2011
1x Rieter E35 Omegalap A, Year: 2017
8x Rieter E76 JERSEY, Year: 2011
2x Rieter E86 JERSEY, Year: 2017

Ring Spinning Frame:
7x Rieter K45, 1632 spindles, Year: 2011
7x Rieter K46, 1632 spindles, Year: 2014

Linked to Winders:
7x Savio Polar I DLS, 42 Spindles, Year: 2011
7x Savio Polar I DLS, 42 Spindles, Year: 2014

AJ14/220526/AS/

Rieter Cotton Ring Spinning Line

Rieter Blowroom:
Year: 2011
1x Rieter A11 Unifloc
1x Rieter Pn.Fibre Conv
1x Rieter B12 Uniclean
1x Rieter TVS Jossi Comboshield
1x Rieter B72 Unimix
1x Rieter B72 Unimix
1x Rieter A79 Unistore
1x Rieter A79 Unistore
1x Rieter Jossi Magiceye
1x Rieter Jossi Magiceye
1x Rieter A21 Condeser
1x Rieter A21 Condeser

Carding:
14x Rieter C60, Year: 2011

Drawing Frame:
5x Rieter SBD-45, Year: 2011
5x Rieter RSB-D-45, Year: 2011

Combing:
1x Rieter E35 Omegalap D, Year: 2011
1x Rieter E35 Omegalap C, Year: 2011
10x Rieter E76 JERSEY, Year: 2011

Ring Spinning Frame:
14x Rieter K45, 1632 spindles, Year: 2011

Linked to Winders:
14x Savio Polar I DLS, 42 spindles, Year: 2011

AI03/220526/

TRUTZSCHLER TC 10 CARD

Quantity: 8, Year: 2020, Can size 1 meter, Single licker-in, Cotton RUNNING

AH82/210526D/YOR-YR/F/BC/

Barmag Oerlikon EAFK-PES-MULTI Texturizing(Site B)

Quantity: 1
Year: 2017 May
Model “EAFK-PES-MULTI”
288 spindles
SZ function (double disc friction)
Inverter type, Auto-doffing
Two Heaters
Heberlein jets

Additional tech details:
1- The machine is 2 sides, it means side A and side B, separately, LH+RH.
2- The machine JETS are Heberlein brand
3- INVERTER,
There are two typed of driving system as below:
(1). Individual Spindle Drive (e.g., Barmag FK, EFK, E-AFK, etc.) Structure and Control: Each spindle is driven individually by
a disc motor and controlled by an inverter (frequency converter).
The inverter regulates the rotation speed and torque for each spindle separately.
(2). Belt-Driven System (e.g., Murata 33H) Structure and Control: All spindles are driven by a single motor through a common belt system.
Speed is uniform across all spindles and is controlled by the main motor speed.

4- The RANGE OF DENIERS that these machines do range from 30 to 300d.
(1). Factory where the machine is mostly producing 75d and 150d, specially 300d.
for example 850rpm x 150d x 288sp x 24h x60 min. / 9,000 / 1,000 = 5,875.2 Kg x 30 days= 176,256Kg monthly per machine 288sp.
(2). With S-Z function(double disc), possible to produce 600d.
(In case of production for 600d with 300d by S-Z function,
productivity is 1.8 times higher than standard operation)
(3). In case of production with lycra device, productivity will be
decreased by 10 to 15%.

5- machine is made in China by Barmag of Germany (Assembled in China but with all key parts from Oerlikon-Barmag, Germany.)
6- This machine is in a SITE called SITE [B] and is partially working only, because they decided to stop soon machine by machine.
7- Machine can be inspected under power
8- machine is multispindles.
9- Heaters to be operated independently, so possible to work with single heater or two heaters
10- Machine has better quality PU type disc instead of ceramic disc.

AA30/210526/AX/

NSC Schlumberger FM8N Horizontal Rubbing Frame

Quantity: 1, Year: 1996, Horizontal rubbing frame, 20 spindles, manual doffing,
355mm pitch, 2 rovings per bobbin, input 12 to 15 ktex according to the material, roving weight 0.66 -5.5Nm, draft 9 to 26 by gear box, NSC double apron drafting, draft apron 145 mm wide,
rubbing speed 1200 cycles /min maximum, number rubs 5 to 8 per meter, 300mm bobbin, delivery speed up to 220meters/min., Note: 2000 Bobins included

AE17/200526D/OAO-YO/M/AS/

BCF Spinning Machine S5 Tricolor

Quantity: 1, Year: 2007, Tri-color machine, 3 extruder 6 position, total 18 bobbins, PP yarn 1000 – 3000 dtex. Each extruder with Doteco dosing unit.

AE17/200526D/TCI-YI/M/AS/

BCF Spinning Machine S5 Monocolor

Quantity: 1, Year: 2004, Mono-color machine, 3 extruder 6 position, total 18 bobbins, PP yarn 1000 – 3000 dtex. Each extruder With Colortronik dosing unit.

AA05/200526D/AOY-AL/C/AU/

Sant Andrea Passage

1st Passage Sant Andrea CSN
Year: 1997
Can size 1000x1200mm

2nd Passage Sant Andrea DSN
Year: 1997, Can size 1000×1200

3rd Passage Sant Andrea SH 22
Year: 1997, Can size 800×1200, Double exit

4th Passage GV20M
Year 2002, Speed: 280 mt/min, Doubling 4*4, Nip distance: 40-110 mm, Double cans, 4 slivers jnto 2 cans, 800 x 1000 mm

Preparation line – it is possible the sale without 4th passage GV20M

AF74/200526/

SSM Doubler

SSM Doubler
Quantity: 1, Year 1998,Type PSF-52-53, 48 positions, No of ply: 24 with 3 ply, 24 with 5 ply, Travers: Adjustable tube size from 5” to 11”, Winding type: Precision, Waxing device for synthetics, Ready for OHTC, 400V, 50 Hz.

SSM Doubler
Quantity: 1, Year around 1995 (no name Plate), 48 positions, Travers: 8”, Winding type: Drum, No of ply: 2, 1 inverter for 8 spindles, OHTC.