AA02/160426D/PL-AI/F/AR/
DREF 2/94 FT Friction Spinning Machines
Quantity: 3, Year: 1997/1998/1999, Each with 24 positions, 2/94 system, 8” Tube Take Up, 2 ½” Turn Bakelite Drum, Can Feed, Can Ø 20”, Individual Spindle Drive, Invertor drives. Emergency Stop.
72 Total Positions: 3 units of 24-position machines, ideal for large-scale production.
2/94 System: Proven technology for efficient yarn production.
Inverter Drives: Energy-efficient and precise speed control.
Increased Productivity: High-performance machines for efficient yarn production.
Energy Efficiency: Inverter drives reduce energy consumption and costs.
Dismantled control panel plus 4 sections each of 6 spindles.
Machines are well-maintained and ready for immediate use, minimizing maintenance needs.
AE42/250626/BQ/
NSC GV20 Gill Box
Quantity: 1, Year: 1997, 4 sliver 2 can.
Note: The machine has 4 heads drafting heads with fallers pins
4 sliver 2 can , Can size 700×1000 each , The machine is all original.
Once we agree on the price after receiving advance payment we will show you the machine running .
NOTE: Machine has been imported from Taiwan to India. it did not work in India.
The videos were taken before machine moved to warehouse.
AC09/250626D/TL-L/F/BF/
AutoWinder Schlafhorst X5 Magazine
Quantity: 4, Year : 2 X 2013: 2 X 2015, 60 Drums,, Uster Clearer with Waxing, conicity 4° 20′, Magazine
Warehouse but can be seen under power in dry run state.Machines are equipped with an air splicer.
AB52/240626E/T-A/M/BX/
NSC Gillbox GN5
Quantity: 2, Year: 1973, Rack for 2 x 4 pots, manual outlet 700 x 1000.Stopped.
AB52/240626E/T-A/M/BX/
NSC Gillbox GN5
Quantity: 1, Year: 1978, Autoleveller, creel 2 x 6 bobbins, bobbin delivery.Stopped
AB52/240626E/T-A/M/BX/
NSC Gillbox GN5
Quantity: 1, Year: 1979, Creel 2 x 5 cans , bobbin delivery, with RMC.Stopped
AB52/240626E/T-A/M/BX/
NSC Gillbox GN5
Quantity: 1, Year: 1974, Creel 2 x 5 cans, bobbin delivery.Stopped
AC11/240626D/APO-AC/F/CW/
Rieter R36 Open End
Quantity: 2, Year : 2019, No of rotor: 600rotors, Rotor dia T34, Opening roller , Waxing device , Auto knotting device , OHTC , Inverter , Power : 380V , 50Hz , Condition : running.
AC11/240626D/AOO-AC/F/CW/
Saurer Open End BD7
Quantity: 2, Year : 2018, No of rotor: 600rotors , Rotor dia T34, Opening roller OK D40 DN, Auto knotting device , No lifting device , No waxing device , No yarn clearer , OHTC , Inverter driver , Power : 380V , 50Hz , Condition : running .
AE34/230626E/RL-R/M/
Lezzeni Cops Winder
QUANTITY: 1, YEAR: 2000, TYPE CLV / C 200 COPS WINDER MACHINE, SPINDLE QUANTITY 128, EXTRA EQUIPMENT EACH SPINDLE HAS METER COUNTER AND AUTOMATIC, CUTTING, INVERTER ORIGINAL, MACHINE DIMENSION 70 /1483/177 cm ( Width/lenght /Height), ORIGIN ITALY, ELECTRIC 400V 50 HZ 4 kW, YARN to be processed – Multifilament PP and nylon. Dtex: 300-1000 (270 – 900 denier), Outlet bobbin: emty bobbin is Outer dia:48,0 mm (changeable), max.Lenght: 415 mm ( You can work lower lenght) IN WORKING CONDITION.
AE34/230626E/RL-R/M/
Lezzeni Cops Winder
QUANTITY: 1, YEAR: 1998, TYPE CLV / C 200 COPS WINDER MACHINE, SPINDLE QUANTITY 128, EXTRA EQUIPMENT EACH SPINDLE HAS METER COUNTER AND AUTOMATIC, CUTTING, INVERTER ORIGINAL, MACHINE DIMENSION 70 /1498/177 cm ( Width/lenght /Height), ORIGIN ITALY, ELECTRIC 400V 50 HZ 4 KW, YARN to be processed – Multifilament PP and nylon. Dtex: 300-1000 (270 – 900 denier), Outlet bobbin: emty bobbin is Outer dia:48,0 mm (changeable), max.Lenght: 415 mm ( You can work lower lenght) IN WORKING CONDITION.
AC09/220626/
Schlafhorst X5 Auto Winder
Quantity: 1, Year: 2015, Type of Feed : Magazine, No of Drums : 60, Yarn Clearer Make : Uster, Conicity : 4°20′, Waxing : Available, OHTC Make : Sohler.
AE34/230626E/RI.L-R/M/
RIETER TWO FOR ONE (TFO) YARN TWISTER
QUANTITY: 6, YEAR 2003, TYPE DT-362/132 TWO FOR ONE (TFO) YARN TWISTER
SPINDLE QUANTITY 156 x 2= 312 Spindle ( DOUBLEX), CONDITION IN WORKING CONDITION
MONTAGE (156spindle x 2 Storey)=312 Spindle, SPINDLE DIAMETER 132 mm
DIRECTION of TWISTING S and Z, POT DIAMETER (SIZE) 127 mm
BOBBIN TYPE B7 ( Bobbin Height 230mm), BOBBIN DIAMETER 59mm
BOBBIN(TAKE-UP TRAVERSE/ COURSE) 200 mm
AUTOATIC LIFTING SYSTEM PNEUMATIC, YARN COUNTS 20 -300 DENIER
MACHINE DIMENSION 85/2300/285 cm (Width / Lenght / Height) (Dublex), ORIGIN FRANCE
ELECTRICITY 380V 50 HZ 22 kW ( Doublex 44 kW), IN WORKING CONDITION
AE34/230626E/RI.L-R/M/
RIETER TWO FOR ONE (TFO) YARN TWISTER
QUANTITY: 6, YEAR: 2002, TYPE DT362/132 , SPINDLE QUANTITY 168 x 2= 336 Spindle
CONDITION IN WORKING CONDITION, MONTAGE (168 spindle x 2 Storey)=336 Spindle
SPINDLE DIAMETER 132mm, DIRECTION of TWISTING S and Z
POT DIAMETER (SIZE) 127mm, BOBBIN TYPE B7 ( Bobbin Height 230mm)
BOBBIN DIAMETER 59mm, BOBBIN(TAKE-UP TRAVERSE/ COURSE) 200 mm
AUTOMATIC LIFTING SYSTEM PNEUMATIC, YARN COUNTS 20 -300 DENIER
MACHINE DIMENSION 85/2300/285 cm (Width / Lenght / Height) (Dublex), ORIGIN FRANCE
PRESSURE AIR 5 Bar- 1 m3/h, ELECTRICITY 380V 50 HZ 22kW ( Doublex 44 kW), IN WORKING CONDITION
AA30/160626/AX/
Seydel NSC Schlumberger Converter FB20
Quantity: 1, Year 2013, Model FB20
8 end creel for continuous filament tow packages with tension control.
(300mm tubes ID74mm 260mm traverse 200mm diameter)
The FB20 model is used in a short in-line breaking process consisting of one pre-stretching block followed by three breaking heads.
(N Schlumberger developed the FB20 stretch breaker especially designed for technical fibres. These fibres can be carbon fibres, glass fibres, metallic fibres, para or meta-aramids fibres, polyethylene (HMPE), polytetrafluoroethylene (PTFE) .All these fibres are used in composites parts thanks to their exceptional technical characteristics (high tenacity, elongation, stiffness etc.)
Pre- stretching – Single Rubber roller dia 280mm x 400mm with a pair of tension cylinders dia.150mm.
Breaking section – 3 off Rubber rollers dia 280mm x 400mm with 3 pairs of breaking cylinders dia.75mm.
Fibre trumpet and dual delivery rollers.
Delivery into can dia. 400mm x 500mm.
Cooling unit
Dust extraction cabinet with dust collecting.
Inspection can be planned with few days notice.
AC86/220626/
SSM Taslan Yarn Texturizing
Quantity: 1, Year: 2007, PERFECT FOR POLYPROPILENE YARN OR BCF YARN, NUMBER 35 POSITIONS, AUTODOFFING, HEBERLEIN JET, FINAL BOBIN 290mm, CREEL WITH 8 BOBIN FOR POSITIONS.
AG82/230626/
TEMAFA CARDING WILLOW WITH BALE OPENER
Year: 1999, Type: OK + KW, Width: 1.600 mm.
Setup: Long Feeding Table, Bale Opener, Carding Willow, Exit Fan, Including all electrical motors, Including control system.
AB45/230626/BY/
Savio TFO TDS 15 N DUOPOT
Quantity: 1, Year: 1995, Model: TDS 15 N DUOPOT, nr 160 spindles , Exit 6″, Pot height 8″, Delivery: Immediate , Condition: Running
AA23/180626E/PI-L/F/BY/
SAHM Precision Winder
Quantity: 1, Year: 1995, Type 230GE, 214 Winding Positions.
Electrical Specifications: Power Supply: 3 Phase, 400 V, Frequency: 50 Hz, Rated Operating Current: 3 × 69.4 A, Installed Power: 48.1 kVA.
The SAHM 230GE is a high-quality German precision winding machine designed for technical yarns, industrial fibers, tapes and synthetic filament applications. The machine is equipped with 214 winding positions and is suitable for high-volume production requiring excellent package quality and reliable operation.
AD81/170626E/LC-R/F/
Trutzschler TC11 Carding
AC62/180626D/CO-O/F/
Gaudino FB350 Ring Spinning Frames
Quantity: 2, Year: 1991, 75 Ring Diameter, 280 Spindle, Machines in production until May.
AA10/150626E/RP-Y/M/
GALAN Assembly Twisting
Quantity: 1, Year: 1990, 160 Spindles (80×2), double independent side, ring diam.150 mm., tube h.600 mm., external feeding creel, 4 ply, stop spindle feeding to break or lack yarn, 380 V. 50 hz.Spindles tubes included.Machine in good mechanical condition.Complete in all its parts.Included own spindles tubes, gears, pulleys.
AE02/150626E/RY.L-Y/M/
Sahm Winder 400E
Quantity: 1, Year: 1998, 90 heads, for Monofil, 10 – 300 mm hub width, cops dia. up to 400 mm
AF74/010626E/ATI-AI/M/
DREF 2000 Spinning Machine
Quantity: 1, Year: 2003, 12 Spindles, With a long spare part list.
AA10/150626E/YL-L/M/
Plant For Ropes Production
Composed of:
1 SIMA Machine 1s Twist mod.BETA 12-10-4, delivery bobbin flange dia.360 mm x traverse 480 mm, barrel dia.105 mm
1 SIMA Cabling machine 2nd Twist mod. BETA C25-12-4, for ropes dia.24 mm/25 mm, also dia.35 mm, delivery bobbin flange dia.800 mm x traverse 550 mm, barrel dia.180 mm
AC09/070626D/LA-P/F/BF/
Trutzschler TC07 IDF Carding
Quantity: 2, Year: 2009, CFD: Available, Can Changer: Automatic, Can Dia: 20″, Waste Collection: Continuous, No of Licker In: 3, St Flat Front: 12, Chute Feed Type: DFK 943, Type of Coiler: IDF, CCD: Available in IDF, St Flat Back: 12. cylinder wire and top flats are renewed. No missing parts. Stopped but test run possible
Note: 2 Machines require 1×40′ HC, HS Code: 8445.11
AI08/150626D/CYC-AO/F/BA/
Muratec Vortex 870
Quantity: 8, Year: 2013, 96 spindles each, Machines Have polymaster, Very good condition, Machines are running. Machines can be inspected under power.
AA10/150626E/PL-L/M/
FADIS Hank Winding Machines
Quantity: 2, Year: 2014, mod. SINCRO D SW 510, 40 heads each, delivery 8″, 5°57
AA05/130626D/YO.L-P/F/CL/
Cognetex Preparation Line
3 passages as follows:
1 x SMC420 blender, year 1999, tops feeding, 2 x tops delivery in 1 bobbin
1 x SC40011VA, year 1992, tops feeding, autoleveller, 1 sliver in 1 can delivery
1 x SC40022V, year 1992, can feeding, 2 slivers in 2 cans delivery
loaded in 2 x 40 ” box containers
AA05/130626D/CI/F/CL/
Volkmann 2×1 VTS06
Quantity: 1, Year: 1996, 80 positions, feeding 8″, pot Dia 230 mm., delivery 6″, conicity 5°57′
loaded in 1 x 40″ box container
AA03/120626/BY/
Gillbox NSC GC30-604
Quantity: 1, Year: 2004, feeding 2×4 cans, delivery 1 sliver in 1 can 800×1.000,automatic can change, separate special NSC sliver oiling device
AE07/100626/AS/
Barmag FK6-1000M DTY Machines
Quantity: 4
1x Barmag FK6-1000M (Manual Doffing), Year: 1995, Spindles: 240
Made in Germany, Configuration: 10 Sections per machine (24 spindles/section), Oven: M-Type, Take-up Speed: Mechanical speed up to 1000 m/min, Heaters: Barmag original heaters, Tension Control: No Unitens, No Lycra device attached, Product range: DTY 75 Den to 1200 Den.
1x Barmag FK6-1000M (Manual Doffing), Year: 1997, Spindles: 240
Made in Germany, Configuration: 10 Sections per machine (24 spindles/section), Oven: M-Type, Take-up Speed: Mechanical speed up to 1000 m/min, Heaters: Barmag original heaters, Tension Control: No Unitens, No Lycra device attached, Product range: DTY 75 Den to 1200 Den.
1x Barmag FK6-1000M (Manual Doffing), Year: 1998, Spindles: 216
Made in Germany, Configuration: 9 Sections per machine (24 spindles/section), Oven: M-Type, Take-up Speed: Mechanical speed up to 1000 m/min, Heaters: Barmag original heaters, Tension Control: No Unitens, No Lycra device attached, Product range: DTY 75 Den to 1200 Den.
1x Barmag FK6-1000M (Manual Doffing), Year: 1998, Spindles: 216
Made in Germany, Configuration: 9 Sections per machine (24 spindles/section), Oven: M-Type, Take-up Speed: Mechanical speed up to 1000 m/min, Heaters: Barmag original heaters, Tension Control: No Unitens, No Lycra device attached, Product range: DTY 75 Den to 1200 Den.
Fully Working Condition and maintained to high standards.
Regular maintenance performed; all friction units and ceramic guides are in good condition.
Not in operation since March 2026.
Fully Operational: Machines are currently connected to power and can be tested on-site before dismantling.
A comprehensive set of spare parts (discs, belts, motors, etc…) available.
AA10/090626E/ACL-AI/F/
HDB Woollen Carding
Quantity: 1, Year: +/-1990, width 3m, with its hopper feeder, X-ray weighing, 2 passages, Peralta, 2 passages, Double drafting, Belt 14 mm, 208 yarns
AA30/060526/AX/
Andar Wool Scouring Line
a modern Stainless steel 5 bowl scouring line 2000mm wide 2300Kg capacity per hour manufactured by Andar New Zealand in 1990.
The machine is in continuous operation TILL THIS SUMMER
ESTIMATE NO OF CONTAINERS FOR HOPPER, SCOUR, DRIER and walkway 16 to 20 off 40ft containers (some may require to be open top)
The 2300Kg per hour greasy wool input line is in continuous production daily until summer 2026 (when it will be replaced by a new 2500mm Scouring line)
ANDAR HOPPER 2000mm wide Year 1991
ANDAR WOOL SCOUR 5 BOWLS 2000mm wide Year 1991
ANDAR WOOL LATTICE DRYER 2400mm wide Year 1991
Details: 2000mm Andar Hopper 2000mm Wool scouring Weigh Belt Feed
Bowl 1 (18m3) Squeeze Roller 1
Bowl 2 (15m3) Squeeze Roller 2
Bowl 3 (15m3) Squeeze Roller 3
Bowl 4 (18m3) Squeeze Roller 4
Bowl 5 (15m3) Squeeze Roller 5
Andar Electrical Control Panel Triple crank rake mechanism Individual Gas red heating for each bowl Heavy solid dirt discharge valves
Drier: Andar Lattice Wool Dryer 2400mm 10 Gas burners, lattice conveyor
Exclusions not included: grease centrifuges, effluent treatment, water recycling are not included in the sale.
A full service of dismantling and loading of machinery and export services are provided
1. Power Requirements
Hopper , Hopper pin sheet 4kw, Motor 1.5 kw , Motor 0.75kw
BOWLS x 5 , 4kw squeeze press , 1.5 kw rakes , 1.1 kw other rakes , .55 sheets
circulating pump 4kw x 5
Dryer , 8 fans 15kw , 2 fans 18.5kw
Drum drive – 2 x 1.5kw
Blower motor 4kw x5
2. Labour Requirements, 4 workers total , 2 pickers , Scourer , Feeder
3. Dryer Output / Packing Machine, 1800kg / 2000kg Wool dependant
4. Water Input Wool dependant
5 litres per kilo.
5. Water Output / Waste Water Treatment, 3 to 4 litres per kilo.
None – “”mill retaining all water treatment””
6. Area Required for complete set up (60m long – 6m wide approx)
AH68/090626E/AC.C-R/F/BY/
GALAN FANCY YARN TWISTER
Quantity: 1, Year: 1994, TYPE MINI PR-F/3 MP, 6 positions – ring-dia 120 mm tube adjustable
Up to 500 mm – fully electronic control –, Electronic programmer GTG-S-6
The machine was bought for a LABORATORY and has never Really been used.VERY GOOD CONDITION.
AJ17/080626/AT/
Marzoli, Rieter Roving Frames & Rings / Savio Winders
Roving Frames:
3x MARZOLI FT6D Roving Frame, Year: 2013, Spindles: 160
1x MARZOLI FT60D Roving Frame, Year: 2017, Spindles: 192
3x RIETER F33 Roving Frame, Year: 2001, Spindles: 120
2x MARZOLI FT6D Roving Frame, Year: 2012, Spindles: 144
1x MARZOLI FT6D Roving Frame, Year: 2013, Spindles: 160
1x MARZOLI BCX16A Roving Frame, Year: 1998, Spindles: 120
Ring Frames:
16x MARZOLI MDS1 Ring Frame, Year: 2013, Spindles: 1392
5x RIETER G33 Ring Frame, Year: 2000, Spindles: 1200
7x RIETER G33 Ring Frame, Year: 2001, Spindles: 1200
6x MARZOLI MDS1 Ring Frame, Year: 2012, Spindles: 1680
6x RIETER G30 Ring Frame, Year: 1997, Spindles: 1008
Winders:
1x SAVIO ECO PULSARS PLUS E Cone Winder, Year: 2020, Spindles: 60
1x SAVIO ORION E Cone Winder, Year: 2003, Spindles: 60
2x SAVIO ORION E Cone Winder, Year: 2004, Spindles: 60
1x SAVIO ORION E Cone Winder, Year: 2005, Spindles: 60
1x SAVIO POLAR E Cone Winder, Year: 2012, Spindles: 60
2x SAVIO POLAR E Cone Winder, Year: 2014, Spindles: 60
1x SAVIO POLAR E DUO-LOT Cone Winder, Year: 2015, Spindles: 60
1x SAVIO ORION E Cone Winder, Year: 2006, Spindles: 60
3x SAVIO ORION E Cone Winder, Year: 2007, Spindles: 60
3x SAVIO ORION E Cone Winder, Year: 2008, Spindles: 60
6x SAVIO ECO PULSASRS PLUS I DLS Cone Winder, Year: 2020, Spindles: 26
4x SAVIO ECO PULSASRS PLUS I DLS Cone Winder, Year: 2021, Spindles: 26
2x SAVIO ECO PULSASRS PLUS I DLS Cone Winder, Year: 2022, Spindles: 26
Lines/machines have been in production until Dec 2025 and stopped then. All machines are complete and can be put in production right after relocation and installation in the buyer’s factory.
AB45/080626/AQ/
Marzoli Super Blender B12
Quantity: 1, Year: 2022, Working widht of detacher 2.250 mm, lenght channel 30.000 mm, for cotton and man made fibers up to 65 mm, Production up to 1600 kg/h, 2 Beaters and 2 conveying rollers for fine opening of the raw materials , Settable for two assortments , 380 V 50 HZ, Condition: Dismantled.
AE07/070626/
NSC Combers ERA & PB30
Quantity: 3
AE07/070626E/AYI-AI/M/
ERA Comber, Year: 2012
AE07/070626E/ATL-AL/M/
ERA Comber, Year: 2017
AE07/070626D/RL-L/M/
PB30 Comber, Year: 1990
AE07/070626/
Complete Long Staple Acrylic Spinning Plant
Ring Spinning Machines:
AE07/070626E/ATC-AC/M/
10x Zinser Ring Spinning Frame, 1200 spindles, mechanical drafting, ring Ø 82.5 mm, lift 260 mm., Year: 2018.
Preparation Line Machines:
AE07/070626E/ASI-YI/M/
1x Seydel Breaker, Year: 2021
AE07/070626E/OI-CI/M/
1x Sant'Andrea 1st Drawing Passage, Year: 2018
AE07/070626E/ACI-CI/M/
1x Sant'Andrea Rebreaker, Year: 2018
AE07/070626E/AAI-AI/M/
1x Sant'Andrea 1st Drawing Passage, Year: 2005
AE07/070626E/LI-AI/M/
1x Sant'Andrea 2nd Drawing Passage, Year: 2005
AE07/070626E/LI-AI/M/
1x Sant'Andrea 3rd Drawing Passage, Year: 2005
AE07/070626E/AAI-RI/M/
1x Sant'Andrea Finisher 24-head, Year: 2005
AE07/070626E/ACI-CI/M/
1x Seydel Breaker, Year: 2012
AE07/070626E/AIL-CL/M/
1x Sant'Andrea Rebreaker, Year: 2012
AE07/070626E/TL-AL/M/
1x Sant'Andrea 1st Drawing Passage, Year: 2012
AE07/070626E/TL-AL/M/
1x Sant'Andrea 2nd Drawing Passage, Year: 2012
AE07/070626E/TL-AL/M/
1x Sant'Andrea 3rd Drawing Passage, Year: 2012
AE07/070626E/ATI-RL/M/
1x Sant'Andrea Finisher 24-head, Year: 2012
AE07/070626E/RL-AI/M/
1x Seydel Breaker, Year: 1988
AE07/070626E/CI-L/M/
1x Cognetex Rebreaker, Year: 1994
AE07/070626E/AL-L/M/
1x Cognetex 1st Drawing Passage, Year: 1994
AE07/070626E/AL-L/M/
1x Cognetex 2nd Drawing Passage, Year: 1994
AE07/070626E/AL-L/M/
1x Cognetex 3rd Drawing Passage, Year: 1994
AE07/070626E/YI-CL/M/
1x Cognetex Finisher 22-head, Year: 1994
AE07/070626E/LL-CI/M/
1x Sant'Andrea Mélangeur Blender, Year: 2001
AE07/070626E/YL-AI/M/
1x Sant'Andrea Draw Frame, Year: 2001
AE07/070626E/YL-AI/M/
1x Sant'Andrea Drawing Machine, Year: 2001
AE07/070626E/TI-CL/M/
1x Sant'Andrea Rebreaker (TOPS), Year: 1997
Volufil Machines:
AE07/070626E/SL-AL/M/
2x Savio Volufil, 45 heads, Year: 20021
AE07/070626E/ALI-CI/M/
1x Savio Volufil, 45 heads, Year: 2011
AE07/070626E/ATI-CI/M/
4x Savio Volufil, 45 heads, Year: 2012
Twisting Machines:
AE07/070626E/TL-AL/M/
4x Savio Two-for-One Twister, 272 spindles, pot Ø170 mm, Year: 2012
AE07/070626E/PL-CI/M/
4x Savio Two-for-One Twister, 272 spindles, pot Ø170 mm, Year: 2016
Winding Machines:
AE07/070626E/RL-AL/M/
1x Savio Automatic Winder, 60 heads with magazine, Year: 2002
AE07/070626E/PI-CI/M/
1x Savio Automatic Winder, 60 heads with magazine, Year: 2011
AE07/070626E/PI-CI/M/
4x Savio Automatic Winder, 60 heads with magazine, Year: 2012
AE07/070626E/ACL-CL/M/
1x Savio Automatic Winder, 60 heads with magazine, Year: 202
AE07/070626/AS/
Complete Long Staple Spinning Line for Carpet Yarn and Knitting Yarn and other Yarns.
Breaker:
AE07/070626E/PL-AL/M/
1x Seydel 870 Breaker, Year 1998
AE07/070626E//M/
3x Seydel 871 Breaker, Year 2003
Rebreaker:
AE07/070626E//M/
2x Seydel 711 Rebreaker, Year 2003
AE07/070626D/CPL-AL/M/
1x NSC GC 15 Rebreaker (RF), Year 1997
Gill Boxes/Passages:
AE07/070626E/YL-AL/M/
3x Sant'Andrea Novara ST21 Gillbox, Year 2003
AE07/070626E/AIL-CL/M/
3x NSC GC30 Gillbox, Double Regulated, Year 2015
Finisher Drawing Frames:
AE07/070626E/ACI-RI/M/
1x NSC FM32 Finisher Drawing Frame, 24 Deliveries, Year 2001
AE07/070626E//M/
1x NSC FM42 Finisher Drawing Frame, 24 Deliveries, Year 2015
Ring Spinning:
AE07/070626E/ACL-AL/M/
14x Zinser 451 Ring Spinning Frames, 1116 Spindles per Machine, 57 mm Ring Diameter, 83.5 mm Gauge, Year 2014
Winding Section:
AE07/070626E/OL-AL/M/
6x Savio Polar Plus Automatic Winders, 64 Spindles, Year 2013
AE07/070626E//M/
1x Savio Polar Winder, 64 Spindles, Year 2010
AE07/070626E//M/
1x Savio Orion Automatic Winder (E), 64 Spindles, Year 2002
AE07/070626E/RI-AI/M/
1x Savio Orion Magazine Winder (M), 64 Spindles, Year 2003
Twisting Department:
AE07/070626E/YL-AL/M/
5x Savio Geminis Assembly Twister 302B, 240 Spindles, Year 2003
AE07/070626E//M/
8x Savio Geminis Twister 244B (Dupont Type), 280 Spindles, Year 2003
Doubling Section:
AE07/070626E//M/
2x Simet Doubling Machines, 70 Spindles, Year 2003
AE07/070626E//M/
4x Tiangsh Doubling Machines, 28 Spindles, Year 2013
Volufil Section:
AE07/070626E//M/
7x Savio Espero Volufil Machines, 45 Spindles, Year 2003
Hank Preparation:
AE07/070626E//M/
6x Hemaks Hank Making Machines, 19 Positions, Year 2008
AE07/070626E//M/
6x Fadis Hank Making Machines, 14 Positions, Year 2008
AE07/070626E//M/
6x Rite Hank Winder Machines, 30 Positions, Year 2013
AE07/070626E//M/
1x Hemaks Hank Winder Machine, 20 Positions, Year 2002
Line available for sale as a complete package or by individual sections.
AC09/050626/
Rieter R60 Open End
Quantity: 10, Year: 2013-2014, No of Rotors : 600, No of Piecer Carriage : 4, Rotor Diameter in mm : 33, Conicity : 2 degree, Type of Spinbox : R60, Length Measuring : Available, Rotor Type : 31 – XGM BD – AE1.
AE30/060626D/ASI-AI/F/
Saurer BD7 Open End
Quantity: 8, Year: 2017-2018, 504 ROTORS, 34mm rotors, Corolab yarn clearer, with digital piecing , Without auto doffing , Without waxing , Running on mill floor.
Note: New Chinese Waxing, can be added for USD 10,000
AA10/050626E/YS-Y/M/
GIGLIOTTI & GUALCHIERI Hollow Spindle Fancy Twister
Quantity: 1, Year: 2001, mod. FANTAROC-FIL ST2, 32 spindles, 2 drafting zones, take up on spindle, ring dia.110 mm., with possibility to add needles on 32 heads for tape and also take up on cone 230 mm.