AI47/140425/CM/
TRUTZSCHLER CARDING MACHINES
Quantity: 6, YEAR: 2012, TYPE: TC 7, COILER TYPE: CCA, CAN SIZE: 40”D. X 48”H., SINGLE LICKER-IN, Condition: Stopped at mill floor
AA98/140425E/ACI-AI/C/AQ/
Bonino Semi Worsted Carding
Quantity: 1, Year: 1987, w. width 2800 mm. Silo feeder, Fibers weight device, Pre-avantrén , roll conveyor, First drum with 2 workers and strippers, Second drum with 6 workers and strippers , Double doffer, Delivery 2 tapers on after carding gill box LAWER , can 1000 x 1200 mm. with autodoffing, Still running , Machine excellent maintained; very low used.
AB74/140425/
Gilbos Bitwinders
Quantity: 12
Condition: Perfect running condition
All Machines come with Splicers
AB74/140425E/AC-C/M/
Bitwinders Single Head Machine
Quantity: 7, Year: 2x2009 / 4x2010 / 1x2011
AB74/140425E/AS.L-C.L/M/
Bitwinders Double Head Machine
Quantity: 1, Year: 2013
AB74/140425E/CA-R/M/
Bitwinders Double Head Machine
Quantity: 2, Year: 2014
AB74/140425E/AP.L-C.L/M/
Bitwinders Double Head Machine
Quantity: 2, Year: 2012
AE02/140425E/YSP-AP/M/AN/
Bruckner Stenter Frame
Quantity: 1, Year: 2001, ww. 3200 mm, gas heated, new combi chain (pin and clips), new burner
with Goller washing machine, 2 compartments, entry with Bianco and Dogal, 2 Küsters foulard, rapport measuring device (2 Pleva systems with camera), Scheuchel heat recovery system (2015)
new burners, new chain, new entry control (both sides), SPS and electronic cpl. new for stenter and washing machine
6 chambers, The washing machine is in front of stenter, production: curtains and other wefts, stopped a few months back
AC09/130425/
Rieter E36 & Rieter E86 Comber
Rieter E36 Omega Lap Former
Quantity: 1, Year: 2018, Model : E36 Omega, Creel Position : Length wise, No of Doublings SLF : 28, Feed Can Dia : 40″, Suction : Centralized
Rieter E86 Comber
Quantity: 6, Year: 2018, Model : E86, Can Dia : 24″, Can Height : 48″, Unicomb Make/Type : i500 flex, Rieter/Graf, Top Comb Make/Type : Rieter Ri-Q-top graf, Waste Collection : Continuous, Exhaust / Waste Suction : Upwards, Lap Feed Try : Trolley Feed
AC13/130425/
Complete Spinning Mill Ring And Open-End Systems
Blowroom (RIETER): Uniflock, Mono, Unimix
Carding: Trützschler DK 903 & Rieter C4
Drawframes / Pre-combing: Rieter F/D series & Unilap
Speed Frames: Marzoli F-5 & Rieter F1/1A
Ring Frames: 22x RIETER G5/1 – 1008 spindles each
Open-End Spinning: 2x RIETER R40 – 220 & 320 rotors
Winding / Twisting: Schlafhorst 338 Autoconers, Saurer Tritec TFO Twisters
Other Systems: Air compressors, Steamers, Cone winders, Waste sorter
All machines are in excellent working condition and ready for immediate relocation.
This turnkey solution includes both Ring Spinning and Open-End Spinning, along with complete
preparation, winding, and auxiliary systems.
AA05/130425D/CO.L-R/M/AT/
Trutzschler Draw Frame TD03
Quantity: 1, Year: 2012, Autoleveller, delivery 18″x45″ (to fead open end)
AB28/130425E/AC-C/F/AY/
Schlafhorst Saurer Automatic Rest Cone Winder Autoconer 338
Quantity: 1, Year: 2007, Type RF-338/1, Automatic cone winder for residual yarns, 1 spindle, Magazine revolver feed with 12 cans, With LÖPFE clearer type YarnMaster Spectra TK850, Colour touch screen INFORMATOR with printer, Take-up traverse 6″ = 150 mm, conical bobbin 4º20′ with possibility to adjust to cylindrical bobbins, Splicer and thermal splicer, AUTOTENSE electromagnetic yarn tension, With package to package rewinding device, Machine has less than 900 running hours.
AA03/130425E/AC-C/F/
NSC GC12 Gillbox
Quantity: 1, Year: 1984, Linked by inverter with FOR card Gigant, Delivery: 1 sliver in 1 can diameter 1.000mm x 1.200-1.400mm height, auto can change, Good condition, still running.
AD26/120425/
Complete Open End Spinning Plant 8.432 Rotors
Range count yarn Ne 12- Ne 32 , production in 24 hours x 30 days Ne 24 : 2.000 tons.
4x RIETER R35, YEAR: 2017
ROTORS: 500 PER MACHINE, WITHOUT RIETER YARN CLEARER, ROTOR DIAMETER : 34, BOBBIN DELIVERY: CYLINDIRAL BOBBIN, COTTON OPENING ROLLER: C40 DN, WITH OHTC, WITH INVERTER DRIVER, POWER: 380 VOLTS, 50 Hz, 280A, 6BAR.
2x RIETER R36, YEAR: 2019
ROTORS: 600 PER MACHINE, WITHOUT RIETER YARN CLEARER, WITH WASHING DIVICE, ROTOR DIAMETER : 34, BOBBIN DELIVERY: CYLINDIRAL BOBBIN, COTTON OPENING ROLLER: S40 DN, WITH OHTC, WITH INVERTER DRIVER, POWER: 380 VOLTS, 50 Hz, 280A, 6BAR.
2x SAURER BD7, YEAR: 2018
ROTORS: 600 PER MACHINE, WITHOUT RIETER YARN CLEARER, WITHOUT WAXING DIVICE, ROTOR DIAMETER : 34, BOBBIN DELIVERY: CYLINDIRAL BOBBIN, COTTON OPENING ROLLER: OK40 DN, WITH OHTC, WITH INVERTER DRIVER, POWER: 380 VOLTS, 50 Hz, 352A.
3x SAURER BD480, YEAR: 2017
ROTORS: 448 PER MACHINE, WITHOUT RIETER YARN CLEARER, WITHOUT WAXING DIVICE, ROTOR DIAMETER : 34, BOBBIN DELIVERY: CYLINDIRAL BOBBIN, COTTON OPENING ROLLER: OK40 DN, WITH OHTC, WITH INVERTER DRIVER, POWER: 380 VOLTS, 50 Hz, 248A, 100% Running condition.
4x TRUTZSCHLER TC15 -IDF2 DESINATION Card, YEAR: 2017
TYPE-NO TC/ IDF2 916-7001/ 812-0001, CANS 400 mm, WITH INVERTER DRIVER, POWER: 380 VOLTS, 50 Hz, 100% Running condition.
2x TRUTZSCHLER TC15 -IDF2 DESINATION Card, YEAR: 2018
TYPE-NO TC/ IDF2 916-7001/ 812-0001, CANS 400 mm, WITH INVERTER DRIVER, POWER: 380 VOLTS, 50 Hz, 100% Running condition.
4x TRUTZSCHLER TC15 -IDF2 DESINATION Card, YEAR: 2017
TYPE-NO TC/ IDF2 916-7001/ 812-0001, CANS 400 mm, WITH INVERTER DRIVER, POWER: 380 VOLTS, 50 Hz, 100% Running condition.
3x TRUTZSCHLER TC15 -IDF2 DESINATION Card, YEAR: 2019
TYPE-NO TC/ IDF2 916-7001/ 812-0001, CANS 400 mm, WITH INVERTER DRIVER, POWER: 380 VOLTS, 50 Hz, 100% Running condition.
2x TRUTZSCHLER BO-A 2300 DESINATION Bale Opener, YEAR: 2017
TYPE-NO 196112, WITH INVERTER DRIVER, POWER: 380 VOLTS, 50 Hz, 100% Running condition.
2x TRUTZSCHLER SP-MF DESINATION Separator, YEAR: 2017
TYPE-NO 145-0404, WITH INVERTER DRIVER, POWER: 380 VOLTS, 50 Hz, 100% Running condition.
2x TRUTZSCHLER CL-P DESINATION Pre- Cleaner, YEAR: 2017
TYPE-NO 053-2507, WITH INVERTER DRIVER, POWER: 380 VOLTS, 50 Hz, 100% Running condition.
2x TRUTZSCHLER CL-P DESINATION Pre- Cleaner, YEAR: 2019
TYPE-NO 053-2507, WITH INVERTER DRIVER, POWER: 380 VOLTS, 50 Hz, 100% Running condition.
2x TRUTZSCHLER MIX-U10 DESINATION Universal Mixer, YEAR: 2017
TYPE-NO 238-1014, WITH INVERTER DRIVER, POWER: 380 VOLTS, 50 Hz, 100% Running condition.
2x TRUTZSCHLER CL-C3 DESINATION Cleaner, YEAR: 2017
TYPE-NO 097-1027, WITH INVERTER DRIVER, POWER: 380 VOLTS, 50 Hz, 100% Running condition.
2x TRUTZSCHLER TS-SCAN TS-T5 DESINATION Foreign part separator, YEAR: 2017
TYPE-NO 158-0730, WITH INVERTER DRIVER, POWER: 380 VOLTS, 50 Hz, 100% Running condition.
2x TRUTZSCHLER SP-DX DESINATION Dedusting machine, YEAR: 2017
TYPE-NO 385-1009, WITH INVERTER DRIVER, POWER: 380 VOLTS, 50 Hz, 100% Running condition.
AD26/120425/
Complete Open End Spinning Plant 4.400 Rotors
Range count yarn Ne 12- Ne 32 , production in 24 hours x 30 days Ne 24 : 1.000 ton.
4x RIETER R35, YEAR: 2017
ROTORS: 500 PER MACHINE, WITHOUT RIETER YARN CLEARER, ROTOR DIAMETER : 34, BOBBIN DELIVERY: CYLINDIRAL BOBBIN, COTTON OPENING ROLLER: C40 DN, WITH OHTC, WITH INVERTER DRIVER, POWER: 380 VOLTS, 50 Hz, 280A, 6BAR, 100% Running condition.
2x RIETER R36, YEAR: 2019
ROTORS: 600 PER MACHINE, WITHOUT RIETER YARN CLEARER, WITH WAXING DIVICE, ROTOR DIAMETER : 34, BOBBIN DELIVERY: CYLINDIRAL BOBBIN, COTTON OPENING ROLLER: S40 DN, WITH OHTC, WITH INVERTER DRIVER, POWER: 380 VOLTS, 50 Hz, 280A, 6BAR.
2x SAURER BD7, YEAR: 2018
ROTORS: 600 PER MACHINE, WITHOUT RIETER YARN CLEARER, WITHOUT WAXING DIVICE, ROTOR DIAMETER : 34, BOBBIN DELIVERY: CYLINDIRAL BOBBIN, COTTON OPENING ROLLER: OK40 DN, WITH OHTC, WITH INVERTER DRIVER, POWER: 380 VOLTS, 50 Hz, 352A.
10x TRUTZSCHLER TC15 -IDF2 DESINATION Card, YEAR: 2017
TYPE-NO TC/ IDF2 916-7001/ 812-0001, CANS 400 mm, WITH INVERTER DRIVER, POWER: 380 VOLTS, 50 Hz, 100% Running condition.
1x TRUTZSCHLER BO-A 2300 DESINATION Bale Opener, YEAR: 2017
TYPE-NO 196112, WITH INVERTER DRIVER, POWER: 380 VOLTS, 50 Hz, 100% Running condition.
1x TRUTZSCHLER SP-MF DESINATION Separator, YEAR: 2017
TYPE-NO 145-0404, WITH INVERTER DRIVER, POWER: 380 VOLTS, 50 Hz, 100% Running condition.
1x TRUTZSCHLER CL-P DESINATION Pre-Cleaner, YEAR: 2017
TYPE-NO 053-2507, WITH INVERTER DRIVER, POWER: 380 VOLTS, 50 Hz, 100% Running condition.
1x TRUTZSCHLER MIX-U10 DESINATION Universal Mixer, YEAR: 2017
TYPE-NO 238-1014, WITH INVERTER DRIVER, POWER: 380 VOLTS, 50 Hz, 100% Running condition.
1x TRUTZSCHLER SP-DX DESINATION Dedusting machine, YEAR: 2017
TYPE-NO 385-1009, WITH INVERTER DRIVER, POWER: 380 VOLTS, 50 Hz, 100% Running condition.
AF74/130425/
Schlafhorst Rotor Spinning Line
SPINNING SECTION
7 x Schlafhorst Autocoro480 Open End Spinning Machines
Year 2007
480 rotors each
Spinbox SE12
4 piecers
Corolab XQ clearers
Rotor diam. 31mm
Combing roller type B20DN
Navel type KSK4
Waxing
CARDING SECTION
10 x Trutzschler TC11 cards
Years: 4×2012, 2×2013, 2×2014, 2×2016
11 x Trutzschler TC07 cards
Year 2011
6 x Trutzschler TC03 cards
Years: 1×2005, 4×2007, 1×2008
Automatic coiler
Can size: 1000mm x 1200mm
Central suction
DRAWING SECTION
1 x Rieter RSB-D45 finisher
Year 2012
Exit can size: 450mm x 1070mm
3 x Rieter RSB-D40 finishers
Year 2007
Exit can size: 450mm x 1070mm
2 x Rieter RSB-D35 finishers
Year 2004
Exit can size: 450mm x 1070mm
BLOWROOM SECTION
LINE NR.1 (BLENDING)
3 x Trutzschler BOWA 1600 weighing pans, year 1995, ww 1600mm, one with condanser
1 x Trutzschler FM 1000 blending converyor, year 1995
1 x TTE (Turkish make) MTT-20 metal holder
1 x Trutzschler TFV-1 1200 Tuftomat, year 1995, ww 1200mm, with feeding trunk and condanser
1 x Trutzschler MPM8/1400 Multimixer, year 1995, 8 chambers, ww 1400mm
LINE NR.2
1 x Trutzschler BO-A 2300 Blendomat, year 2013, arm width 2300mm
1 x TTE (Turkish make) MTT-20 metal holder, year 2022
1 x Trutzschler BO-U 1600 manuel feeder, year 2008, ww 1600mm, with BR-COI condanser
1 x Trutzschler BOA 1200 manuel feeder, year 1995, ww 1200mm, with LVSA condanser
1 x Trutzschler MPM8/1600 Multimixer, year 1998, 8 chambers, ww 1600mm
1 x Trutzschler CVT4 1600, year 1995, ww 1600mm, with feeding trunk and condanser
1 x Trutzschler TO-T1 Tuftomat, year 2016, with feeding trunk and condanser
LINE NR.3
1 x Trutzschler BDT019/2300 Blendomat, year 2003, arm width 2300mm
1 x TTE (Turkish make) MTT-20 metal holder, year 2018
1 x Trutzschler AFC Axiflo, year 1995
1 x Trutzschler MPM10/2000 Multimixer, year 1995, 8 chambers, ww 1600mm
1 x Trutzschler CVT4 1600, year 1995, ww 1600mm, with feeding trunk and condanser
1 x Trutzschler AS sliver feeder, year 1995
AI45/100425D/RYY-AY/F/BQ/
Rieter E80 Comber & Rieter E35 Unilap
5x RIETER E80 COMBER, YEAR: 2015, DELIVERY: SINGLE, CAN CHANGER: AUTOMATIC, CAN SIZE: 40 X 48, SUCTION: CONTINOUS.
1x RITER E35 UNILAP, YEAR: 2014, NO. OF DOUBLING: 28, SPOOL DIA: 200 MM, SPOOL WIDTH: 300 MM, FEED CAN: 40 X 48.
AC63/090425/BO/
Rieter RSB D40 Draw Frames
Quantity: 2, Year: 2010, Can Size 18″ x 36″, Single Delivery.
AC63/090425/BO/
Murata QPRO Winders
Quantity: 3, Year: 1×2013-2×2014, 2 Machines Left, 1 Machine Right, 50 Spindles, Round Magazine, With Loepfe Zenit C, With G2Z, Without Doffer, Without FFD, With OHTC, Conocity 4°20°.
AI08/100425D/CYC-AO/F/BA/
Muratec Vortex 870
Quantity: 8, Year: 2013, 96 spindles each, Machines Have polymaster, Very good condition, Machines are running. Machines can be inspected under power.
AB46/100425/
Rieter RSB Drawing
Quantity: 5, Year: 1990 & 1992, Model: RSB 851
Quantity: 3, Year – 1990 & 1997, Model – RSB 951
AB46/090425/AR/
Sahm Winders
AB46/131123D/RS-AI/F/AR/
SAHM 260 E WINDER
Quantity: 1
Year: 2004
Voltage 400V 3phase
Built with 48 winding units / machine
Cone I.D. size 3.5” or 88.9 mm
Length of cone 11.25” or 285.75 mm
Traverse of winding on package 245 mm
Diameter of wound yarn on package 7.8” or 198 mm
AB46/131123D/YI-AI/F/AR/
SAHM 260 E WINDER
Quantity: 1
Year 2003
Voltage 400V 3phase
Built with 50 winding units / machine
Cone I.D. size 3.5” or 88.9 mm
Length of cone 11.25” or 285.75 mm
Traverse of winding on package 245 mm
Diameter of wound yarn on package. 7.8” or 198 mm
AA08/010425/
Reeling Machine MAGNITEX EL3000
Quantity: 1, Year: 2006, single sided, n.1 swift length 5 meters, perimeter adjustable by micron from 1400 to 2000 mm
swift opening and closing by means of pantograph controlled by motor and worm screw
yarn guide rod controlled by Brushless motor, regulation of the crossover and adjustable hank width via keyboard, machine with barrier photocell, compliant with current regulations, external feed creel
AA08/010425/
Volkmann Double (2×1) Twisting VTS 06-0 Bauart 5.62
Quantity: 1, Year: 1998, n.144 spindles, gauge 445 mm, feeding 10″ (250 mm) by assembly winder, h.tube 290 mm – diam. int.68 mm
basket internal diameter 230 mm, free balloon, exit 8″ (200 mm), tube length 225 mm – base internal diam.68 mm – tip internal diam.33 mm, pneumatic threading, cylinder with rubber band
dual control torsion adjustment, single control spindle speed adjustment, take-up package, yarn reserve, soft cones device, 3-pin cones holder, cones unloading belt
AA08/010425/
Savio Double (2×1) Twisting Geminis 302 CF
Quantity: 2, Year: 1999, n.224 spindles each, free balloon, dual control
feeding 8” (200 mm) from assembly winder diam. bobbin 185 mm
gauge 300 mm – 4 spindles per module, basket diameter 200 mm, exit 6” (152 mm) – conicity 4°20’, cylinder with rubber band
take-up package, pneumatic threading, yarn reserve – soft cones device – pin creel
inverter for spindle speed regulation, Mesdan Splicer system mod. ATS 115 – n.2 apparatus per side, Magitex blower with dust discharge at the main unit
AA08/010425/
Savio Double (2×1) Twisting Geminis 242 BF
Quantity: 2, Year: 2000, n.300 spindles each, free balloon, dual control
feeding 8” (200 mm) from assembly winder diam.bobbin 160 mm, gauge 240 mm – 5 spindles per module, basket diameter 180 m,
exit 6” (152 mm) – conicity 4°20’
cylinder with rubber band, take-up package, pneumatic threading, yarn reserve – soft cones device – pin creel, inverter for spindle speed regulation
Mesdan Splicer system mod. ATS 115 – n.2 apparatus per side, Magitex blower with dust discharge at the main unit
AA08/010425/
SSM Assembly Winder DP-Y
Quantity: 1, Year: 1999, n.30 heads, pitch 8 ”(200 mm), tube Diam. interior 56 mm – length 225 mm, oil device Lubrifil, cutter, automatic doffing
conveyor belt to unload cones, external creel 2 ply + reserve, in machine Mesdan ATS system with n.2 Aquasplicer mod.4941 A, in creel Mesdan ATS system with Splicer mod.115, Magitex, Volt. 400/3 50 Hz.
AD44/030425/BA/
73x Wings Barmag Winders POY
Year: 2018, Model: 35T-1800/12, 12 ends, Chuck diameter 114mm, Bobin weight 15kg. Machines are in warehouse.
Each LOT of 36 Winders have one CONTROL System. It means they can be used in 2 separate lines.
AA02/080425E/CIL-AI/M/BY/
Sahm Winder
Quantity: 1, Year: 2002, 40 Heads, Type 411 E, Winding width 350 mm.
AA10/030425/
SANT ANDREA Vertical Finisher
Quantity: 1, Year: 1981, Type SSR 2,, 20 spindles, Tubes 290 mm
AA10/030425/
SANT ANDREA Vertical Finisher
Quantity: 1, Year: 1987, Type SSR 2, 16 spindles, Tubes 290 mm
AA10/030425/
SANT ANDREA Worsted Set
Quantity: 1
Year: 1981, including :
1 Type SN21 autoleveller, creel 2 x 6 cans, delivery 1 can 700 x 1000
2nd passage SN21, creel 2×7 cans or bobbins, ARM, delivery 1 can 700×1000, 1 sliver
3rd passage Type SH22, creel 2 x 6 cans, delivery 2 cans 700 x 1000, 1 sliver per can
AA10/030425/
SANT ANDREA Worsted Set
Quantity: 1
Year: 1987, including :
1st passage type CSN, straight comb, creel 2 x 6 cans or bobbins, delivery 1 can 700 x 1000, 1 sliver
2nd passage type DSN, autoleveller, with disc, ARM, creel 2 x 5 cans, delivery 1 can 700 x 1000, 1 sliver
3rd passage Type SH22, with disc, creel 2 x 5 cans, delivery 2 cans 700 x 1000, 1 sliver per can
AA10/030425/
EDERA Worsted Spinning Frames
Quantity: 2, Year: 2001, 2 x 336 spindles each machine, rings dia. 55 mm, pitch 75 mm, Tubes 260 mm, pneumatic drafting
AA10/030425/
COGNETEX Worsted Spinning Frame FTC 7 L & FTC 8 L
COGNETEX Worsted Spinning Frames Type FTC 7 L
Quantity: 1, Year 1998, 896 spindles, Rings dia. 51 mm, Pitch 75 mm, Tubes 260 mm
COGNETEX Worsted Spinning Frames Type FTC 8 L
Quantity: 1, Year 1995, 544 spindles, Rings dia. 55 mm, Pitch 82.5 mm, Tubes 260 mm
AB45/040425/BY/
Spinning Frame Cognetex FTC 9 L
Quantity: 1, Year: 1985, n. 504 spindles , Ring diam. 70 mm. Gauge 90 mm. Draft SKF PK 1601 , Tube H. 300 mm. Double frame , single drive , Tangential spindles drive belt , Automatic spools doffing, Magitex blower, Inverter to speed set, Included own plastic spindles tubes, Set twist gears included.
AA10/030425E/YP-R/M/
Schlafhorst Automatic Winder
Quantity: 1, Year: 1997, Type 238 G, 30 Spindles, Feeding with creel type “Y”, output in cone of 6” 4°20”, Waxing device, clearer device USTER MK-20, automatic doffing
AG61/250224/
Galan Doubling & Twisting
QUANTITY: 1, YEAR: 2008, MODEL CRB 225 / 60 – for heavy INDUSTRIAL YARN, 60 POSITIONS ( 30 / 30 ), RING DIAMETER 140 x 16,7 mm, GAUGE 225 mm, TRAVERSE 270 mm, S and Z TWIST, SPINDLE SPEED up to 8.400 RPM, INDIVIDUAL DRIVES and BELT DRIVEN, MOTOR 68 KW, ELECTRICITY 380 V – 50 Hz – 6 Bar, Up to 26.600 Denier, Including approx: 13.000 BOBBINS (aluminium and plastic), DIMENSIONS: 8,55 m x 1,20 m x 2,0 m.
AE42/020425D/ACI-T/F/BQ/
NSC GC14 Gill Boxes
Year: 1993
1x Gc 14 1 sliver 1 can with autoleveller
1x Gc 14 2 sliver 2 can
1x Gc 14 4 sliver 2 can
Machines are fairly in good quality for their year of make.
Machines moved to warehouse and reinstalled in warehouse.
AE42/020425/BQ/
NSC Gillboxes
1x NSC GC14
1x NSC Gillbox GV20
Year 1997 , It is autodoffing
The GV20 high speed finisher Gill Box have perfectly vertical drafting system above the cans with 04 faller heads having chain drive.
Machine with 4 Heads, delivery 02 cans (700*1000), consequently double end.
An Overhead type creel with a capacity of 4*4 cans upto dia 800 mm.
Faller chain Pitch – 9.525 mm
Number of fallers per Head – 2*56
Active fallers – 2*16
Draft cylinder Diameter -30/ 62.5 mm
Feed Cylinder Diameter – 50 mm
Fallers Pinned length – 85mm
Standard Draft Range – 4.5 -13.1
Max. Delivery speed – 400m/min
Compressed air supply – 6.0 Bars
1x NSC GC15
AA08/010425E/LS-Y/F/AQ/
SSM DP-Y Assembly Winder
Quantity: 1, Year: 1998, n.60 heads, Installed in two separate sections, 30 +30 facing each other, Pitch 8” (200 mm), n.1 Display for setting the parameters of the first 20 heads with Precicontrol cards, n.1 Display for setting the parameters of the 40 heads, Tube 220 mm diam.43 mm on 40 heads and 54 mm on 20 heads, Internal feeding creel, n.10 heads 4-ply – n.50 heads 3-ply, Each section of 30 heads with Magitex, Mesdan Splicer system mod.ATS Aquasplicer 4921 A, Automatic doffing, Machine in excellent condition, installed.
AB45/300325E/CA-Y/F/AQ/
Fadis Doubling Machine
Quantity: 1, Year: 1997, model TUAN BE, nos. 36 spindles, Without Automatic doffer, Exit cone 8”, Conometer, Creel 3 ply, 380 V 50HZ, Condition: dismantled. Need 1 container 40.
AA05/290325E/RPL-CL/F/BX/
NSC Schlumberger PB32.LJ Worsted Combers
Quantity: 5, Year: 1996, Quality: 9.
AC29/260325/AS/
Complete Spinning Lines
Line1:
1x BREAKER SEYDEL 873, YEAR: 2019
1x REBREAKER SANTA ANDREA RSNC, YEAR: 2018
1x 1.PASAJ SANTA ANDREA CSN, YEAR: 2006
1x 2.PASAJ SANTA ANDREA CSN, YEAR: 2006, REGULATOR
1x 3.PASAJ SANTA ANDREA SH22, YEAR: 2006
1x 4.PASAJ SANTA ANDREA HC22 , YEAR: 2002
1x FINISHER SANTA ANDREA RF5B, YEAR: 2006, 24 HEAD VERTICAL
4x RING ZINSER 451, YEAR: 2019, 1116 SP. 55 BRACELET
1x BOBIN SAVIO ORION, YEAR: 2003, 60 SP.
1x BOBIN SAVIO POLAR, YEAR: 2012, 60 SP.
2x VOLUFIL SAVIO ESPERO, YEAR: 2003, 45 SP.
2x TWISTINGS SAVIO SIRIUS, YEAR: 2013, 272 SP.
Line2:
1x BREAKER SEYDEL 873, YEAR: 2013
1x REBREAKER SANTA ANDREA RSNC, YEAR: 2013
1x 1.PASAJ SANTA ANDREA CSN, YEAR: 2013
1x 2.PASAJ SANTA ANDREA CSN, YEAR: 2013, REGULATOR
1x 3.PASAJ SANTA ANDREA SH22, YEAR: 2013
1x 4.PASAJ SANTA ANDREA HC22 , YEAR: 2002
1x FINISHER SANTA ANDREA RF5B, YEAR: 2013, 24 HEAD VERTICAL
3x RING ZINSER 451, YEAR: 2019, 1116 SP. 55 BRACELET
1x BOBIN SAVIO ORION, YEAR: 2013, 60 SP.
1x BOBIN SAVIO POLAR, YEAR: 2013, 60 SP.
1x VOLUFIL SAVIO ESPERO, YEAR: 2012, 45 SP.
2x TWISTINGS SAVIO SIRIUS, YEAR: 2013, 272 SP.
COGNETEX Line:
1x BREAKER SEYDEL 868, YEAR: 1990
1x REBREAKER COGNETEX SMC, YEAR: 1995
1x 1.PASAJ SC11, YEAR: 1995
1x 2.PASAJ COGNATEX SCE11, YEAR: 1995
1x 3.PASAJ SANTA ANDREA HC22 ARE, YEAR: 2002, REGULATOR
1x FINISHER COGNATEX FRC, YEAR: 1995, 22 SP.
AI08/260325D/TA-T/F/BA/
Barmag FK6-1000V Texturizing
Quantity: 2, Year: 2010-2012. These are equipped with Godets and Single density.
AE30/260325D/ARC-O/F/
Barmag Texturizing Machine FK6-1000V
Quantity: 2, Year: 2015, V type, 288 spindles, Chinese best Jet,Jingdong. FK6-1000 is not godet type, double heater. Running on mill floor.