AG82/141025E/CPS-AS/F/AN/
Needle Punching Nonwoven Line
Consiting of:
1x Temafa Bale Opener, Year: 2000, Type: BFNZ, Working width: 3.500 mm, With bale tilting platform, With return condenser for edge trims.
1x HDB Carding machine with hopper feeder, Type: Galaxy, Working width: 2.500 mm, Setup: Weighing Scale, Roller Feeding, Breast Cylinder with 1x Worker / Stripper, Transfer Roll, First Cylinder with 3x Worker / Stripper, Transfer Roll, Second Cylinder with 3x Worker / Stripper, Double Doffer with fly comb.
1x Autefa Crosslapper, Year: 1989, Type: CL2000, feeding width: 2.500 mm, exit width: 2.800 mm.
1x DILO Needle loom with feeding system, Year: 1989, Type: CBF 25 / DI-LOOM OD-II 25, Working width: 2.500 mm.
1x Winder
Approx no of ctrs for shipment: 6-7 containers. the line is assembled and ready for inspection on running conditions
AA86/131025/AQ/
Malimo Malivlies Looms
Quantity: 2, Year: 1990’s
1x MALIMO MALIVLIES loom, maximum working width 3.800mm, current gauge 18, (works on average with gauges from 14 to 22), Edge recovery at the exit of the loom.
1x MALIMO MALIWAT loom, maximum working width 3.600mm, with heated bars to be able to go faster. Current average speed 1200/1300 beat/minute, Current gauge 14 (works on average with gauges from 7 to 22).
1x Oil cooling system.
1x Cutter is available for both looms.
They are in a complete line.
Machine condition: very good
Status: in running
AA86/131025E/LS-L/F/
MALIMO MALIVLIES
AA86/131025E/TS.Y-L/F/
MALIMO MALIWAT
AF08/260925D/CTI-CI/F/CM/
Muller MVC2-150 Needle Looms with Muller MBJ3 Woven Label Machines
Quantity: 6
1x Year: 02/1997, 10/36,768/512 hooks.
1x Year: 02/1997, 14/24,768/320 hooks.
1x Year: 02/1997, 12/30,768/448 hooks.
1x Year: 05/2000, 12/30,768/256 hooks.
1x Year: 05/2000, 12/30,768/448 hooks.
1x Year: 04/2001, 14/24,768/320 hooks.
with:
2x Muller MBJ3 woven label machines
1x MBJ3 1/1150, CH=05/03, with 1152 hooks, taffeta weaving 5 repeated, 8 colors 8 pre feeder, with vary pick device.
1x MBJ3 1/1150, CH-07/01, with 1152 hooks, harness with taffeta weaving 5 repeated, 8 colors 8 pre feeder, with very pick device.
The machines still running with a good condition.
AG47/200925E/YC-R/M/
Dilo OUG Finishing Needle Loom
Quantity: 1, Year: 1988, ww: 2.5 m, Double board downstroke, Double board upstroke, Stroke: 60 mm, 11 600 needles/m, 1 200 rpm.
AG47/200925E/OL-L/M/
Fehrer NL 21 Finishing Needle Loom
Quantity: 1, Year: 1982, With batt feeding system, ww: 3.8 m, Double board downstroke, 10 000 needles/m, with cutting and winding system.
AG47/200925E/OL-L/M/
Fehrer NL 21/S Finishing Needle Loom
Quantity: 1, YearL 1994, ww: 2.4 m, Double board downstroke, Stroke: 40 mm, 10 000 needles/m.
AG47/200925E/CCL-AL/M/
Asselin A50R-SM2 Finishing Needle Loom
Quantity: 1, Year: 2005, ww: 5.9 m, Double board upstroke, Stroke: 60 mm, 14 000 needles/m, 1 200 rpm.
AG47/200925E/CCL-AL/M/
Asselin A50R-SM2 Finishing Needle Loom
Quantity: 1, Year: 2005, ww: 5.9 m, Double board upstroke, stroke: 40 mm, 14 000 needles/m, 1 400 rpm.
AG47/200925E/AIA-T/M/
Asselin SD 53 1M 04 Finishing Needle Loom
Quantity: 1, Year: 1994, With batt feeding system, ww: 5.3 m, Double board downstroke, 9 400 needles/m, 1 000 rpm.
AG47/200925E/AIA-T/M/
Asselin SM 53 2E 06 Finishing Needle Loom
Quantity: 1, Year: 1994, ww: 5.3 m, Double board upstroke, 6 000 needles/m, 1 200 rpm.
AG47/200925E/OA-T/M/
Fehrer NL 21/R Finishing Needle Loom
Quantity: 1, Year: 1988 – refurbished in 2011, ww: 3 m, Double board downstroke, 6 000 needles/m, 1 300 rpm.
AG47/200925E/PA-T/M/
Fehrer NL 21/R Finishing Needle Loom
Quantity: 1, Year: 1988 – refurbished in 2011, ww: 3 m, Double board upstroke, 6 000 needles/m, 1 300 rpm.
AG47/200925E/CPC-AC/M/
Fehrer NL 36/150 Finishing Needle Loom
Quantity: 1, Year: 1995 – fully refurbished and modernized in 2024 (as new!), ww: 3.3 m, Single board downstroke, Single board upstroke, Stroke: 150 mm, 8 000 needles/m, 800 rpm.
AG47/200925E/PT-T/M/
Automatex PR30 Pre-Needle Loom
Quantity: 1, Year: 1994, With batt feeding system, ww: 2.7 m, Single board downstroke, Single board upstroke, Stroke: 70 mm, 6 000 needles/m, 1 100 rpm.
Dilo OUG Finishing Needle Loom
Quantity: 1, Year: 1988, ww: 2.5 m, Double board downstroke, Double board upstroke, Stroke: 60 mm, 11 600 needles/m, 1 200 rpm.
Dilo OD II Finishing Needle Loom
Quantity: 1, Year: 1988, With CBF, ww: 3 m, Double board downstroke, Stroke: 60 mm, 3 800 needles/m, 1 200 rpm.
AG47/200925E/AAC-O/M/
Fehrer NL 21/S Finishing Needle Loom
Quantity: 1, Year: 2001, ww: 3 m, Double board downstroke, Stroke: 35 mm, 10 000 needles/m, 2 200 rpm.
AG47/200925E/RL.L-R/M/
Dilo UD II 25 Finishing Needle Loom
Quantity: 1, Year: 1978, ww: 2.5 m, stroke: 60 mm, 600 rpm.
AG47/200925E/AAC-O/M/
Dilo Di-Loom OUG I HVXL 25 Hyperpunch Finishing Needle Loom
Quantity: 1, Year: 2001, With CBF, ww: 2.5 m, single board downstroke, single board upstroke, stroke: 60 mm, 14 144 needles/m, 1 200 rpm.
AG47/200925E/RO-R/M/
Fehrer NL 21/RS Finishing Needle Loom
Quantity: 1, Year: 1988, ww: 2.7 m, double board upstroke, stroke: 40 mm, 1 500 rpm.
AG47/200925E/PC-L/M/
Heuer Finishing Needle Loom
Quantity: 1, Year: 1990, ww: 2.5 m, double board downstroke, 4 000 needles/m, with cutting and winding unit.
AG47/200925E/AIA-T/M/
TecTex PR50 Pre-Needle Loom
Quantity: 1, Year: 2016, ww: 2.8 m, With batt feeding system, Double board downstroke, stroke: 70 mm, 3 500 needles/m, 1 100 rpm, with unit to turn the material backwards into the loom for second needling and hence machine can work as a finishing needle loom.
AG47/200925E/PI-L/M/
Automatex PR50/T Pre-Needle Loom
Quantity: 1, Year: 1993, With batt feeding system, ww: 2.5 m, Single board downstroke, stroke: 55 mm, 5 000 needles/m, 1 200 rpm, with Tallers Porto chute feeder/opener, yoc: 1993, ww: 2.15 m and Manes accumulator, longitudinal & cross cutting machine, yoc: 1993, ww: 2.5 m, loom is in this configuration able to make felts without the need for card or airlay system.
AA10/210525/
Asselin Needle Loom
Quantity: 1 , Year: 2000, Type A50R DF4, Working width 4700 mm, Traverse 60 mm, Double board, Max rotation speed 1200 rpm
AG47/200925E/AIA-T/M/
Dilo Di-loom OD II 25 Finishing Needle Loom
Quantity: 1, Year: 1991, With CBF, ww: 2.5 m, Double board downstroke, 8834 needles/m.
AG47/200925E/AIA-T/M/
Dilo OD II 25 Finishing Needle Loom
Quantity: 1, Year: 1984, ww: 2.5 m, Double board downstroke, 8834 needles/m.
AG47/050925E/YL-L/M/
Fehrer NL 9/S Pre-Needle Loom
Quantity: 1, Year: 1988 – refurbished in 2020, ww: 3.6 m, Single board downstroke, 3 000 needles/m, 1 300 rpm.
AA10/040925/
Dilo Needling Loom OUG 1
Quantity: 1, Year: 2001, Type OUG 1, Width 250 cm, Double needling, 1 needle board (1 top, 1 bottom), Stroke 60 mm, Batt feeder CBF 25.
AI31/150825/
Jakob Muller Needle loom
Jakob Muller Needle loom
Quantity: 2, Year: 2005, Type NF53 8/27
Jakob Muller Needle loom
Quantity: 6, Year: 1996, type NF53 4/66
Jakob Muller Needle loom
Quantity: 2, Year: 2007, type NF42 6/27G
Jakob Muller Needle loom
Quantity: 1, Type NFJM53 6/50 with 192 hooks
With 2 – 3 months warranty
Condition : Fully refurbished
AG82/050825/
Needle Punching Line
Width: 2.500mm , Bale Opener
Carding machine with hopper feeder, Make: HDB / Galaxy, Working width: 2.500 mm, Crosslapper
Make: Autefa / CL2000, Width: 2.500 mm / 2.800 mm, Needle loom with feeding system, Make: DILO / DI-LOOM OD-II 25, Working width: 2.500 mm, Winder
AG82/050825/
Needle Punching Line
Width: 2.500mm , Bale Opener, Carding machine with feeder, Make: Spinnbau
Working width: 2.500mm, Cross Lapper, Make: Autefa /CL2000, Working width: 2.500mm / 3.000mm
First Needle Loom, Make: Dilo / Di-Loom OUG-II S25, Second Needle Loom, Make: Dilo / Di-Loom OD-II S25, End-of-Line
AG47/180725E/ARL-AI/M/
Needling Line
Year: 1968-1980
ww: 4.4 m
Consisting of:
1x Bale opener, ww: 1.4 m
1x Fine opener, ww: 1.4 m
1x FOR single doffer card, avantrain + 1 swift, yoc: 1971, ww: 2.5 m
1x Asselin cross-lapper, yoc: 1980s, input: 2.8 m, output: 5.5 m
1x Fehrer pre-needle loom, yoc: 1970s, ww: 5.9 m, single board downstroke
1x Fehrer NL 12 finishing loom, yoc: 1971, ww: 4.9 m, double board downstroke, 5 000 needles/m
1x Fehrer NL 12 finishing needle loom, yoc: 1968, ww: 4.5 m, double board downstroke, 5 000 needles/m
1x Fehrer NL 11 structural needle loom, yoc; 1974, ww: 4.88 m
1x Cutting and winding unit
Up to 350 kg/h
AG47/020725E/LO-O/M/
Needling line
Quantity: 1, Year: 1972-1985 – upgraded with PLC in 2016, ww: 4.4 m
Consisting of:
1 FOR single doffer card, Year: 1972, ww: 2.4 m
1 Asselin cross-lapper, Year: 1985, input: 3 m, output: 5 m
1 Fehrer NL 12 finishing needle loom, with batt feeding system, Year: 1970, ww: 4.88 m, double board downstroke, 3 960 needles/m, 1 Fehrer NL 12 finishing needle loom, Year: 1970, ww: 4.4 m, double board downstroke, 5 004, needles/m, 1 accumulator, ww: 4.6 m, 1 winder, ww: 4.6 m,Up to 250 kg/h
AA30/240625/
Non Woven Needle Loom
Option to feed 2 scrims, 1200mm width, 1100mm working width, Needle Density – 1,414 needles, Wind up Section.
AA10/170625/
Automatex Pre-Needle Loom PR50/T
Quantity: 1, Year: 1999, mod.PR50/T, Width 2800 mm., complete with introduction group and exit group, 4000 needles/linear meter, 1200 rpm., needling from the top, second set spare boards.
AG82/100425/
Fehrer Velour Brush Needle Loom
Quantity: 1, Year: 1991, Type: NL21/S/RV, Working width: max. 4.400mm, Operational, Loom only, Material wrapped on pin roller, Damaged newer brushes/pins, Double board down.
AG82/100425/
Fehrer Velour Brush Needle Loom
Quantity: 1, Year: 1994, Type: NL21/S/RV, Working width: 4.000mm, Refurbished: 2023, Included: Unroll, Jbox, Loom, Inspection stand, Accumulator, Catwalk, Roll up.
AG82/100425/
Fehrer Needle Loom
Quantity: 1, Year: 1990, Type: NL 11/SE, Working width: 4.400mm. , Included: Unroll, Jbox, Needle loom, Inspection stand, Accumulator, Catwalk, Roll up.
AG47/080425E/PY-T/M/BY/
Needling Line
Year: 1996-2002
ww: 4.2 m
Consisting of:
1x Bematic double doffer card, yoc: 2002, ww: 3 m, with randomizing cylinders
1x Tectex cross-lapper, yoc: 2002, input: 3 m, output: 4.5 m, up to 40 m/min
1x 2N (TecTex) NS-3000 pre-needle loom, yoc: 1996, ww: 4.2 m, single board downstroke, 3 333 needles/m
1x cutting and winding unit, ww: 4.5 m
Up to 600 kg/h
Optional: Trützschler opening line, yoc: 1983, consisting of: 4 Trützschler MWS bale openers, 1 Trützschler mixing opener.
SOMETIMES PRDUCTION
AG32/200325E/AIO-S/F/AN/
Dilo Needle Loom
Quantity: 1, Year:: 1986 (needle loom),1989 (feeding system)
incl. DILO feeding system
type: OD 2-25 (needle loom)
CBF / 25 (feeding system), 6864 (feeding system)
working width: 2.500mm
technical data: 12.000 needles / m, needle bar stroke 60mm
stroke rate max. 1.200 UpM, feeding system rebuilt / upgraded in 2020
AG82/190325/
Needle Punching Line
Width: 2.500mm,Bale Opener, Carding machine with feeder, Make: FOR
Working width: 2.500mm, Cross Lapper, Make: Autefa / C60, Working width: 2.500mm / 3.000mm
First Needle Loom, Make: Dilo / Di-Loom OUG-II S25, Second Needle Loom, Make: Dilo / Di-Loom OD-II S25, End-of-Line
AG47/070325E/CSP-AP/M/
Needling Line
Year: 1991-1998, ww: 3 m
Consisting of:
2x Laroche bale openers, yoc: 1991
1x Thibeau double doffer card, yoc: 1998, ww: 2.5 m
1x Asselin 390 cross-lapper, yoc: 1991, output: 3 m
1x Dilo OUG II finishing needle loom, with CBF, yoc: 1991, ww: 3 m, double board downstroke, double board upstroke, 6 000 needles/m
1x winder
AG82/280125E/APS-P/M/AN/
Reisky & Schlese Carding
Quantity: 1
Year: 2004
Reisky & Schlese Hopper Feeder
– Feeding chute
– Horizontal conveyor
– Spike apron
Reisky & Schlese Weighing scale
Reisky & Schlese Nonwoven Card
Working weidth: 2.500 mm
– Upside down dish feeding system
– First Tambour with 2x worker/stripper
– Main Tambour with 5x worker/stripper
– 2x Doffer
– Roller take off
AG82/160125/
ASSELIN Rib Structuring Needle Loom
Quantity: 1, Year: 2002, Type: A50S SDB1, Working width: 4.400 mm
Stroke: 35 mm, Lamella Gauge: 3,5 mm, Stroke frequency: max 1.750 rpm
Needle pattern: approx. 10.570 N/m, Including electrical control cabinet.
AG47/130125E/RRL-CL/M/
Needling Line
Year: 1999-2010, ww: 5 m.
Consisting of:
1x Temafa bale opener
1x Temafa blending opener
1x Temafa carding willow
1x Temafa blending box
1x Trützschler fine opener, yoc: 2005
1x FOR double doffer card, ww: 2.5 m
1x Autefa cross-lapper, yoc: 1999, input: 2.5 m, output: 5 m
1x Dilo Di-loom finishing needle loom, with CBF, yoc: 1999, ww: 5 m, double board upstroke, 18 000 needles/m, 1 500 rpm
1x Dilo Di-loom finishing needle loom, yoc: 1999, ww: 5 m, double board downstroke, 18 000 needles/m, 1 500 rpm
1x Dilo Di-lour structural needle loom, yoc: 1999, ww: 5 m
1x Edge trim opener
1x Cutting and winding unit
AG47/191224E/ORL-RL/M/
Needling & Thermobonding Line
Year: 1988-2019 – refurbished and modernized 2011-2022, ww: 2.2 m
Consisting of:
1x Temafa bale opener, yoc: 1988, ww: 1.3 m
2x Temafa Mixmaster blending boxes, yoc: 1988 – refurbished in 2019, length: 13.5 m, width: 3 m, height: 4.7 m
1x Temafa fine opener, yoc: 1989, ww: 1.3 m
1x Spinnbau double doffer card, yoc: 1988 – refurbished in 2019, ww: 2.5 m, condensing cylinders
1x Asselin Profile cross-lapper, yoc: 1997 – refurbished in 2017, input: 2.5 m, output: 3.3 m
1x Fehrer NL 9/S pre-needle loom, yoc: 1988 – refurbished in 2020, ww: 3.6 m, single board downstroke, 3 000 needles/m, 1 300 rpm
1x Fehrer NL 21/R finishing needle loom, yoc: 1988 – refurbished in 2011, ww: 3 m, double board upstroke, 6 000 needles/m, 1 300 rpm
1x Fehrer NL 21/R finishing needle loom, yoc: 1988 – refurbished in 2011, ww: 3 m, double board downstroke, 6 000 needles/m, 1 300 rpm
1x Dilo Di-lour II structural needle loom, yoc: 1994 – refurbished in 2018, ww 2.4 m
1x Icomatex latex applicator, yoc: 2019, ww: 2.4 m
1x Fleissner drum oven, yoc: 1988 – refurbished in 2022, ww: 2.2 m, 5 drums
1x Reyfam scattering unit and calender, yoc: 1996 – refurbished in 2021, ww: 2.2 m
1x Cima accumulator, yoc: 1990, ww: 2.25 m
1x Cima cutting and winding unit, yoc: 1990, ww: 2.25 m
Up to 500 kg/h
AG82/101224/
Tectex Needle Loom
Quantity: 1, Year: 2019, Type: QP30, Working width: 3.000 mm, Needling: 4 Boards, 2 Down-Stroke/2 Up-Stroke, Stroke: 60 mm, Strokes: max. 1.200 Strokes/min, Needles: approx. 4 x 5.000 Needles/m, Including Batt Feeding Unit, Including Control System.
AG82/101224/
Dilo DiLour-II25
Quantity: 1, Year: 1985, Working width: 2.500 mm, Needling: 2 Boards Down-Stroke, Stroke: 40 mm, Strokes: max. 1.200 Strokes/min, Needles: approx. 2 x 4.000 Needles/m, Including Unwinder, Including Winder, Including Control System.
AG47/220524E/TA-T/M/
Airlay Needling line
Quantity: 1, Year: 1982 – upgraded with Siemens PLC and frequency inverters in 2003, ww: 2.3 m
Consisting of:
1 Fehrer K12 airlay system, ww: 2.3 m, 1 Asselin 169 pre-needle loom (drum tacker), ww: 2.8 m
1 Fehrer NL 21 finishing needle loom, ww: 2.4 m, 4 500 needles/m, Up to 500 kg/h
AA22/281124E/YC-Y/M/BR/
Dilo Structural Needle Loom
Quantity: 1, Year: 1989, Width: 4500mm, Type: DI-LOOP DS 45
Dilo invented the structuring and patterning of preneedled needlefelts in the 1960s. In this process, special fork needles transport fibre loops from the needlefelt into a lamellar grid resulting in pile loops on the backside of the needlefelt. By using different needle arrangements and multi-coloured layers of needlefelts, a great variety of patterns can be realized. A programme-controlled lifting and lowering of the lamellar table allows three-dimensional designs, ideally used for carpets and door mats with patterns, ribcord, tufts, velour structures. High capacity structure loom for ribcord, velour type needle felts and advance patterns, 40 mm stroke, 1500 strokes/min, 6000 needles/lm, gauge 3.5 mm, automatic lubrication, temperature control, and lubricant discharge. Complete with Dilo SW 45 feeding unit and un-winding unit and control panel + electronic software for patterning design.
Prices VALID until Dec 17. 2024 (deposit should be received before Dec 17)
AG82/261124/
Needle Punching Line
Quantity: 1, Capacity: 600 – 750 kg/h depending on fibres, Fiber: synthetic & viscos, Fiber fineness: 1,7 – 6,7 dtex, Grammage: 50 – 1200 g
Consisting of:
Blending line – Make: Truetzschler
Fine opener – Make: Truetzschler, Card feeder – Make: Truetzschler – Type: FBK
Weighing scale, Carding machine – Make: Reisky & Schlese – WW: 2.500mm – double doffer
Crosslapper – Make: Reisky & Schlese – WW: 4.500 mm, Web drafter – Make: Asselin – WW: 4.300 mm
Needle loom – Make: DILO – Type: DI-Loom OUG II S40, Metal detection – Make: Mesutronic
Winder – WW: 4.000 mm, Edge trim opener – Make: Temafa
AG47/231124E/RP-R/M/
Fehrer NL 28/S Pre-Needle Loom
Quantity: 1, Year: 1987, ww: 3 m, single board upstroke, stroke: 60 mm, 900 rpm.