Quantity: 1, Year: 1982 – upgraded with Siemens PLC and frequency inverters in 2003, ww: 2.3 m
Consisting of:
1 Fehrer K12 airlay system, ww: 2.3 m, 1 Asselin 169 pre-needle loom (drum tacker), ww: 2.8 m
1 Fehrer NL 21 finishing needle loom, ww: 2.4 m, 4 500 needles/m, Up to 500 kg/h

Quantity: 1, Year: 1989, Width: 4500mm, Type: DI-LOOP DS 45
Dilo invented the structuring and patterning of preneedled needlefelts in the 1960s. In this ‎process, special fork needles transport fibre loops from the needlefelt into a lamellar grid resulting ‎in pile loops on the backside of the needlefelt. By using different needle arrangements and multi-‎coloured layers of needlefelts, a great variety of patterns can be realized. A programme-‎controlled lifting and lowering of the lamellar table allows three-dimensional designs, ideally ‎used for carpets and door mats with patterns, ribcord, tufts, velour structures.‎ High capacity structure loom for ribcord, velour type needle felts and advance patterns, 40 mm ‎stroke, 1500 strokes/min, 6000 needles/lm, gauge 3.5 mm, automatic lubrication, temperature ‎control, and lubricant discharge.‎ Complete with Dilo SW 45 feeding unit and un-winding unit and control panel + electronic ‎software for patterning design.‎
Prices VALID until Dec 17. 2024 (deposit should be received before Dec 17)

Year: 1999
Brief technical information:

Fibre Blending
Temafa 25m Conveyor (fits 8 bales end to end)
Temafa Single pin sheet blending hopper with Volumetric feed
Temafa Fearnaught Fibre opening, Type RD02
Oiling
Temafa Metal detection
Fan

Feed to either:
Temafa Mix master blending bin with conveyor floor (approx. 20m x 4m) – Type MM20 / 2
Or

Temafa Small Blending bin (5m x 5m)
Or

2 x Temafa blending bins each approx. 2500kgs with single bin Temafa emptier

Temafa fabric condenser and feed tower (10m high)
Trutzschler FD-S fine fibre opening (2005)

Carding

Trutzschler volumetric card hopper feed
2.5m FOR multi-cylinder nonwoven card with double doffer (Serial No. 83001)
Production rate up to 500kgs per hour

Cross lapper
Autefa Cross Lapper (Type 190 73) with 2.5m inlet and 5.0m max lay width (1999)
Serial No 3026

Needlepunch

Sound proof cabinet

5.0m Dilo pre needle (Type CBF T 50, 1999)
(Input web compression sheets with finger system)

5.0m Dilo Needle loom 1:
Type DI-LOOM UD-Li S 50 (1999)
Stroke: UP
Twin Board
Total Needles 90000
Needle Density: 1800 needles /m
Max Gap: mm
Max needled width: 5.0m
RPM: 1500 (Max)

5.0m Dilo Needle loom 2:
Type DI-LOOM UD-II i S 50 (1999)
Stroke: DOWN
Twin Board
Total Needles 90000
Needle Density: 1800 needles /m
Max Gap: mm
Max needled width: 5.0m
RPM: 1500 (Max)

5.0m Dilo Needle loom 3 (Dilour):
Type DI-LOUR-II SXBG 50 (1999)
Stroke: DOWN
Twin Board
Total Needles 160000
Needle Density: 3200 needles /m
Fork needles
Brush conveyor
Max Gap: mm
Max needled width: 5.0m
RPM: 1900 (Max)

Finishing
Menzel J Box
Menzel Overhead gantry
Menzel 5m metal detection
Sellers 5m cropping/shearing + 12 bag fibre/lint collection (2008) (not been used for several years)
4 head edge and centre fabric slitting
Edge trim – Hepp-Schwamborn (Germany) – Edge shredding with fan
ETF cross cutting
ETF batching roll wind-up (2006)
Fabric measure
ETF cross cutting
ETF take-off rolls
6 x fabric roll transport trucks

Electrical Supply: 3 Phase 380-440v, 50Hz
Spare parts: All related spare parts and accessories available in the factory (If any).
Manuals: All manuals available in the factory (If any).

Currently being used in the production of: Automotive Nonwoven Velour Fabrics

Additional information:
Status: Still operating and can be seen running
Condition:Complete and in good working condition
Delivery: End March 2025 onwards
Transport: 25 x 240ft Container (Estimated)

Quantity: 7, Year: 1994, Still running.