AF14/020223/
Gaudino Spinning Frame FPK/450
Quantity: 1, mod. FPK/450, Ring diam. 90 mm, 156 spindles, Double drafting for semi-worsted.
AD39/040223/
Schlafhorst AC5
QUANTITY: 2, YEAR: 2009, MACHINE SIDE LEFT/RIGHT
SPINDLE QUANTITY 50
CLEARER LOEPFE C , CLEARER HEAD TYPE YARN MASTER ZENIT
CONE DEGREE 5,57 , SPLICER WATER
WASTE SUCTION INDIVIDUAL, SUCTION MOTOR WITH INVERTER
WAXING NO , CONE BOTTOM DIAMETER 20 , CADDY QUANTITY 160
DOFFER 2, YARN END FINDER STATION 3
CATALOGS AVAILABLE , DELIVERY IMMEADITE
CONDITION RUNNING , ANY LOST PARTS NO
V-HZ 380V/50HZ/66A , PRISM LCS28
AF56/040223/BA/
Muratec 21C Winder
Quantity: 11, Year: 2008-2009, 60 spindles per Set, Yarn clearer: Uster Quantum 2 \ LOEPFE TK940F, Splicer Nozzle G2Z, With Auto Doffing, Magazine Type.
AC09/030223/
Rieter R40 Open End Spinning
Quantity: 6, Year: 4 X 2004, 2 X 2005, No of Rotors : 320
Measuring Head Type : IMK -C20, Piecer Carriage : 2, Opening Roller Type : B174 N, Rotor Type : XT
Length Measuring : Available, Type of Spinbox : Suessen spinbox SC-1, Type of Drum : SRZ, Delivery Package : Cheese, Naval Type : KSNX, Inverter Main Motor : Available, Hot Air Discharge : Upward, Delivery Motor kW : 17, Opening Roll Motor kW : 11, Waxing : 4 X Not Available , 2 X Available, Rotor Diameter in mm : 4 X 33 XT BD, 2 X 31 XT BD, Rotor Motor kW : 47 , Feed Can Size : 20″ X 46″, Yarn Clearer Make : 4 X Uster Quantum , 2 X Uster Quantum 2, Suction Motor kW : 30
AC29/040223E/PCI-X/F/AS/
Superba TVP3 & Cabling Volkmann
1x Superba TVP3, Year: 2014, 72 spindles.
2x Cabling Volkmann, Year: 2014, 176 spindles.
AE56/310123/
Rieter SB20 Draw Frame
Quantity: 3, Year: 2011, With auto can changer, Can size 50X110cm, Without autoleveller, Stopped on the mill floor.
AC86/300123/
Taslan Air Texturizing RTG
Quantity: 1, mod. RTG, No of positions: 36, Manual change of bobbins, Computer controlled, Each position has independent motor, Heberlain nozzles for maximum quality, Workable Counts: from 300 dtex up to 2500 dtex (final count)
AB15/010223/
NSC Schlumberger FMV36 & FMV30
AB15/010223E/TS-Y/M/
NSC Schlumberger FMV36
16 heads
AB15/010223E/LS-Y/M/
NSC Schlumberger FMV30
20 heads
Machines really very nice.
AA10/300123/
SCHLAFHORST Cone To Cone Winding
Quantity: 1, Year: 1986, mod.GKTXP 138 , 48 heads each, delivery 8”, splicer IV, Uster Quantum clearers, conometer, waxer
Machine was processing acrylic.
AA10/300123/
SCHLAFHORST Cone To Cone Winding
Quantity: 3, Year: 1982, Mod.GKTXP 138
32 heads each, delivery 8”, fishing knotter, Peyer PI 121 clearers, conometer, informator, waxer, Machines were processing acrylic.
AA10/300123/
SCHLAFHORST Cone To Cone Winding
Quantity: 4
1x Year: 1989
1x Year: 1988, with Thermo splicer.
2x Year: 1986, with splicer IV.mod.GKTXP 138
48 heads each, delivery 8”, Uster Quantum clearers, conometer, informator, waxer
Machines were processing acrylic.
AE56/310123D/LT-Y/F/
Rieter C601 Carding
Quantity: 5, Year: 2012,2013, auto Can changer, Coiler 1000*1100mm, Auto leveler, With IGS, Voltage / freq 380/50
AA10/300123/
SCHLAFHORST Cone To Cone Winding
Quantity: 4, Year: 1989, mod.GKTXP 138, 56 heads each
delivery 8”, Thermo splicer, Uster Quantum clearers, conometer, informator, waxer, Machines were processing acrylic.
AF28/300123E/CL-AI/M/AN/
ICBT TFO Twister DT 660R
Quantity:1
Year: 1998
(Rieter) 48 Positions
Tape twisting machine, used mainly for turf/ARTIFICIAL GRASS twisting, but it can also used for carpet yarn or other multifilament.
Stored in warehouse.
Details quoted by the factory:
It was twisting with S and Z which means lefts as well as right turn twisting.
Depending on the material were twisting in a range of 30 – 50, but the machine is able to twist up to 100.
Dtex:
It was twisting yarns in a range of 6000 – 20000 (dtex)
The total machine length of approximately 18 -19 meters
8 modules with 3 twisting stations on each side, each 2 meters long
Control Unit a about 2 Meters
Each Module is 210cm high and 150cm wide
The machine is able to twist on cones with a length of 290mm
The diameter of the bobbin pot is 32cm
Note: the ICBT has some items to fix/repair, its better to be used as spare part machine.
AF54/270123/CA/
Trutzschler Blow Room Line
Year: 2014, Made in Germany
1x Bale opener Blendomat BO-A 2400
1x Multi function SP-MF
2x Pre-cleaner CL-P
1x Axiflow – Double roll cleaner
1x Integrated MIXER MX-I 10 mixer of 10 chambers
1x CL-C4
1x SP-DX
AC09/270123/
Zinser RM 450 Ring Spinning & Schlafhorst AC238 Winder
Quantity: 1, Year 2002 (4), 2003 (1), 720 spindles
Ring dia.56 mm, Gauge 82.5 mm, Tubes 260 mm
Cowemat 395, Mechanical drafting arm
Blower Electro-Jet, FA-NI + Sensorfil system for broken yarn
Linked with:
3 X Schlafhorst AC238 Winder & 2 X Schlafhorst AC238 Winder
30 spindles each , with Waxing and Thermosplicer, Loepfe clearers year 2002/2003
AC86/270123E/O-C/F/
Giudici Twisting
QUANTITY: 2, DOUPLEX 400, POT DIAMETER 260mm, FINAL BOBIN 280mm.
AC86/230123/
RPR Fantasy Yarn
Quantity: 2, Electronic, Motor Brailer, Number 80 spindles each, Final Bobin 170mm.
AC86/230123/
Ratti RJ Twisting
Quantity: 9, Spindles Y , Diameter 120mm Hole 42mm, Cops 330mm, Final Bobin 170mm, Total spindles for machine 288.
AC86/230123/
RPR Twisting
Quantity: 9, C 240N, Number 360, Spindles diameter 125mm type MTS Hole 32mm, Cops 420mm, Final bobin 230mm.
AC86/230123/
RPR Twisting
Quantity: 14, Brand RPR GC 96, Spindles Type Y diameter 140mm Hole 42mm or alternative Spindles Bottiglione Diameter 150mm Noce 42mm, Positions 120 Each, Final Bobin 230mm.
AD78/250123/
Rieter Open End Line
Capacity of production (daily)..approx kg 7000/8000
Complete O.E. plant to produce 100 % Cotton yarns so composed:
BALE opner brand RIETER type UNIFLOC 40
ww.mm.2300 – Line equipped of METAL DETECTOR
Bale opner total lenght mtl 25 approx -year: 1996
FIRST cleaning passage through RIETER UNIMIX
Type B 1 (triple chambers of mixing)- year: 1995
SECOND cleaning passage (hard fillets) type B 60
Above preparation controlled by UNICONTROL panel box by RIETER
Suction line by MARZOLI with automatic distribution through pipes line
8 Carding set brand RIETER mod. C50 drived by inverter
(6 x year: 1995 plus 2x year: 1996) -delivery in tank cm 120
1 multifunctions separator waste recovery with carpet with collection in box year: 1995
4x Fiber DRAWING brand RIETER type RSB 951
Capacity till 8 fibres in introduction – 2 with autolevel and 2 without
Rotary FILTER and compacting head
5x AUTOCONER brand RIETER mod R1- year: 1995/7
Each one: 14 section per side (total heads 280)
Total capacity of autoconer 1400 cones cones 4”20 (diameter 270)
Yarn cleaners with automatic DISCHARGE of cones on the ROBOT packaging
Type CAMEL with motion on railway and robotizzed arm used to load the pallets from autoconer to pallet (1 line up and 1 line down) within 14 lines – automatic palletizer to plasticize the pallets.
Capacity request of power approx KW 1000
Fibres lenght of cotton minimum 27/28
Production line for 100 % cotton (O.E.)
NE from 36 to 16
AA10/230123E/CP-R/M/
RPR 2×1 Twisters
Quantity: 2, Year: 1989,1990, mod.GC-120 S, 120 spindles, Take up tube 230 mm. x dia.56 mm., Feeding from cops 420 mm.
AA10/230123E/LA-R/M/
RPR 2×1 Twisters
Quantity: 2, Year: 2002,2003, mod.GC-240N, 320 spindles (160×2), Take up tube 230 mm. x dia.56 mm., Feeding from cops 420 mm.
AA10/230123E/AP-C/M/
Savio Cone to Cone Winders
Quantity: 2, Year: 2000, mod.ORION, 16 heads, Delivery 6″, 4°20, Splicer Mesdan 594, Uster Quantum (030) optical clearers, Waxer, Manual feeder.
AA10/230123E/YA-R/M/
Savio Cone to Cone Winder
Quantity: 1, Year: 1998, mod.ESPERO RL, 24 heads , Feeding by cone with automatic cone change (240 mm. diameter max), Pitch 6″ (152 mm) , conicity 4°20′ , drum diam 94 mm. 2 turns asymmetric step, 2 section yarn stretcher + waxing device, Automatic joint yarn Splicer Mesdan mod. 490 L, Nº 1 trolley automatic bobbins doffing, Nº 1 automatic magazine cone reserve, Computer Alfa-Panel to set speed , yarn length on package and to control/monitor all the winding process, Electronic yarn clearers Uster UPC mkc20 , Magitex Blower, Lightening along the machine.
AA10/230123E/RR-R/M/
Savio Winder
Quantity: 1, Year: 1998, Mod.ESPERO RL, 40 heads, Left head, Feeding from cones automatic, PC setting processing data and countermeter, Delivery 6” cylindrical 4°20, Drum with 2 turns, Mesdan Acqua Splicer 492 knotters, Clearers Uster UPC heads MK F20 A3 foreign fibers, 1 autodoffing trolley, Waxer, Cones store closed to the headstock, Magitex travelling blower, 380 Volts 50 Hz.
AA10/230123E/CY-R/M/
Savio Cone to Cone Winder
Quantity: 1, Year:1998, Type: ESPERO R, 08 heads, Feeding by cone with automatic cone change ” S ” System (240 mm. diameter max), Pitch 6″ (152 mm) , conicity 4°20′ , drum diam 94 mm. 2 section yarn stretcher + waxing device, Computer Ispector Control to set speed, yarn length on package and to control/monitor all the winding process, Electronic yarn clearers Uster UPC 200 F, Knotters Mesdan Splicer 490 L, or Fisherman Mesdan 410 B ,(one of them at the customer’s choice), Machine fully refurbished.
AC32/230123/BC/
Murata Auto Winder 21C
Quantity: 2, Year: 2008, Type : 21C, 60 drum each, Magazine 9 Pocket, Turn drum : 2.5W, Yarn clearer : Loepfe TK930S – Loepfe Zenit-C, Splicing Nozzle : G2Z, Waxing device, Inverter driver, OHTC. Auto bobbin, Power : 380V x 50Hz, Condition : running.
AC32/230123/BH/
Rieter Draw Frame RSB-D45
Quantity: 2, Year: 2013-2014, Cans size : 20 x 42″, With auto leveler, With auto can changer, All m/c is normal running.
AC32/230123/BH/
Rieter Draw Frame RSB-D40
Quantity: 4, Year: 2006, Cans size: 20 x 42″, With auto leveler, With auto can changer, All m/c is normal running.
AH66/230123E/S-R/M/AY/
Sant Andrea Gillbox RSND
Quantity: 1, Year: 1985, Feed: 2×12 slivers, Pre-draf: 4 cylinders, 3 fields, Output: manual (pot 600x1000mm)
AC32/230123/
Fadis Double Winder
Quantity: 6, Year: 1994, Type: TUAN/B.S, 18/30/36/42 spindle, 2 & 3 ply.
AC32/230123D/TR-L/C/
Schlafhorst Auto Winders 338
Quantity: 5, Year: 2×2006, 3×2007, 60 Drum, Magazine.
AG79/101221E/LT-Y/M/AQ/
Savio Winder Cone To Cone
Quantity: 1, Year: 1999, but updated as explained.52 heads,
grooved cylinder diam. 94.
always worked only cotton.
use it to produce soft packages or hard packages.
Test computer bought new in 2019, on the occasion of the “heavy” overhaul, with 4,200 hours of work.
Double bobbin feeding with automatic feed change (“bicycle”)
4 ° 20 ‘taper (or cylindrical with tailstock change, tube up to max 178 mm.)
Stribbie Loepfe model Yarn Master Plus, TK 830N heads
knotter mod. 410, fisherman knot, with our experience up to Ne 240/2 gassed, valid up to Ne 240/2.
Automatic doffing, with a package conveyor belt on the back
Each head can work a different title with different lengths, at different speeds.
Tube storage in the machine head with automatic feeding of tubes to each single winding head
Magitex vacuum / blower with centralized dust discharge, in the machine head
Lighting on the whole machine
Current power supply: 220 volts three-phase, but designed for 380
AA10/230123E/CO-R/M/
Savio Cone to Cone Winder
Quantity: 1, mod.ESPERO RL, 32 heads, Delivery 6″, 4°20, Aquasplicer, Uster Quantum 2 clearers, Waxer.
AC32/230123/BC/
Rieter Draw Frame RSB-D35
Quantity: 2, Year: 2002, Cans size: 20 x 42″, With auto leveler, With auto can changer, All m/c is normal running.