AA05/200825D/YS.L-AC/F/CL/
Giesse / Gigliotti & Gualchieri Chenille Machines
1x Giesse chenille, year 1997, 32 spindles.
1x Gigliotti & Gualchieri chenille, year 1998, 32 spindles.
Diameter: 140 mm.
AA05/210825D/LI-CY/F/CL/
Fadis Hank-To-Cone Winder
Quantity: 5 , Year: 1997-1998, mod. Tuan.E/500, 25 positions each, one splicer every 2 positions, exit 8″, conicity 5°57′.
AA02/200825/
Muratec Vortex 861 & 870 Air Jet Spinning Frames
16x Vortex 861, Year: 2011, 80 Positions:
Muratec VOS series V3.110, Cone Take up – 4 Deg 20 cone angle, 170mm Cone Length, Muratec Yarn Clearers Type MSC-F with Foreign Fiber Detection, 4 Air Piecers Model 86C with Prisms G2Z, Automatic Doffer Model 86D, Count Range Ne 20 to Ne 60, 100% cotton / Cotton Viscose Blends / Cotton Polyester Blends, Production speed 240 to 450 meters per min per spindle, Average Fiber Length 38 to 40mm, Exhaust – Down, Doffing to conveyor and track, Individual Overhead blower and Track, Power 380 volts 50 Hertz.
22x Vortex 870, Year: 2012, 80 Positions:
Muratec VOS series V3.110, Cone Take up – 4 Deg 20 cone angle, 170mm Cone Length, Muratec Yarn Clearers Type MSC-F with Foreign Fiber Detection, 4 Air Piecers Model 86C with Prisms G2Z, Automatic Doffer Model 86D, Count Range Ne 20 to Ne 60, 100% cotton / Cotton Viscose Blends / Cotton Polyester Blends
Production speed 240 to 450 meters per min per spindle, Average Fiber Length 38 to 40mm, Exhaust – Down, Doffing to conveyor and track, Individual Overhead blower and Track, Power 380 volts 50 Hertz.
AE30/200825/BA/
Rieter E65 & E66 Combers
AE30/200825D/CPA-AR/F/BA/
6X Rieter E66 Combers, Year 2008, Waste collection: continuous, Suction: upwards.
1X Rieter E35 Unilap lap winder 2008 year.
AE30/200825D/ARA-T/F/BA/
5X Rieter E65 Combers, Year 2006, Waste collection: continuous, Suction: upwards.
1X Rieter E32 Unilap lap winder 2006 year.
AG77/190825/
Trutzschler TC-03 Carding
Quantity: 23, Year: 2007, Model CCA1000 Auto Can Changer, 1000mm Can delivery, Autoleveler, Triple licker-in, Combination Wire, 460 volt.
AG77/190825/
Rieter R60 Open End Spinning
Quantity: 2, Year: 2013, 420 positions, wax, Rieter Clearing, 4 robots, 28mm rotors, cotton combing rolls.
AG77/190825/
Schlafhorst ACO360 SE12 Open End
Quantity: 10, Year: 2005, 360 positions, wax, cylindrical take up, 3 Coromats per machine, 31mm magnetic rotors, B174 DN Combing Rolls, Corolab XQ clearing.
AG77/190825/
Trutzschler TD8 Draw Frames
Quantity: 3, Year: 2018, 24×48 can changer, Autoleveller, 6 end power creel.
AI65/190825D/ARC-AC/M/AS/
NSC Finisher FMV 32
Quantity: 1, Year: 1996, 24 spindles, Machine is in good working condition.
AC32/200825D/SS-O/F/AS/
Trutzschler Card TC19I
Quantity: 10, Year: 2023, Type : TC19I, Can Size: 1000x1200mm, Inspection available, Machine Same like New, Separate sale: Possible.
AC29/190825/AS/
Volkmann VTS 05-C Twister
Quantity: 6
3x Year: 2021, 176 spindles, Pot Diameter 275mm, Travears: 250 mm, Length of machine: 43.15mm, Gap between 2 pots: 450mm.
3x Year: 2012, 176 spindles.
Very good condition.
AG77/190825D/AOC-AC/C/AR
Rieter G36 Ring Spinning
Quantity: 12, Year: 2014, 1200 spindles each, Auto doffing, link touch screen controls, Rieter drafting, 42 mm ring dia, 70mm gauge, 210 mm bobbin, Pinter Caipo Monitoring System, KEB Electronics, 1-Electrojet blower , 440 volt/60hz.
Linked to:
Murata Pro Winders, 26 positions each, Uster Quantum 3 Clearers, Foreign Fiber Detector, Waxing, Model 9CD doffer, 5-57 cone take up, Informator touch screen controls with color display, 1-Electrojet blower, 400 volt/60hz.
AA05/071224D/OT.L-O/F/CL/
Cognetex FTC7L Ring Frames
Quantity: 2, Year: 1994, 1024 spindles each, Ring dia. 51 mm., gauge 75 mm., tube height 260 mm., drafting PK1601, blower. Loaded in 4 x 40″ box containers.These machines have been LINKED to autoconers before but now autoconers are sold.
AI64/140825/
Woollen Spinning Frames
Machine Bigagli
Quantity: 1, Year: 1988, Number of Spindles : 176, Ring diameter : 127 mm, Tube 600 mm
Machines Bigagli
Quantity: 2, Year 1988, Number of spindles 98 each, Ring : 127 mm, Tube: 600 mm
Machines Gaudino
Quantity: 2, Year 1986, Type F2K/D, Number of spindles 132 each, Ring 127 mm, Tube 600 mm
AE17/160825D/AO-Y/M/AS/
NSC GC13 Chain Gill
Quantity: 1, Year:1990 , 8 input 1 output , output can size 80×120
AB46/140825/AR/
Giesse Chenille Machines
Quantity: 6
1x GIESSE Chenille Machine 48 heads (drives) with 96 spindle, Model: AC98/EM, Year: 1999:
Tube dimension: 18 inch, Ring dia: 4.5 inch, Rotating blade system, The machine is complete with standard creel. With Blower, Overhead Cleaner: Jacobi, 8 Spindles per section.
5x GIESSE Chenille Machine 48 heads (motors) with 96 spindle, Model: AC91/E, Year 2000:
Tube dimension: 18 inch, Ring dia: 4.5 inch, Rotating blade system, The machine is complete with standard creel. 8 Spindles per section, With Blower, Overhead Cleaner: Jacobi.
Condition – Very good and stopped on mill floor.
AE56/120825D/CC/F/BA/
Saurer Twisting
Quantity: 3, Year: 2014, Made in China, 166 spindles, Spindle gauge 250, Type: FT-08-DHE-269, 166 cup air ring configuration, Running machine.
AB45/130825/BY/
GIGLIOTTI & GUALCHIERI
AB45/130825E/YC-Y/F/BY/
1x Gigliotti & Gualchieri Fancy Twisting Fantaroc fil-ST2 6M
Year 2008
Nos 48 spindles
Roving and yarn creel
Twin Hollow
spindles 200mm traverse winding
AB45/130825E/YY-Y/F/BY/
1x Gigliotti & Gualchieri Fancy Twisting Fantextra FC2-F
Year 2011
Nos 48 spindles
Yarn creel
Twin Hollow spindles
200mm traverse winding
AB45/130825E/YY-Y/F/BY/
1x Gigliotti & Gualchieri Fancy Twisting Fantextra FC2-F
Year 2010
48 spindles
Yarn creel,
Twin Hollow spindles
200mm traverse winding
AB45/130825E/AT.L-A.L/F/BY/
1x Gigliotti & Gualchieri Bobinatrice Winder BFL
Year 2008
Nos 24spindle
hollow spindle
bobbin winding machine
Condition: Mill floor
AB45/120825E/CS-Y/F/BY/
Zinser Simplex
Quantity: 1, Year: 2005, model FL668 , Nos spindles 120, Manual doffing , Draft type PK 1500-0962-604
Cradle size : OH 514-0962746, Bobbin length 450 mm, Electrojet Blower , 380 V 50 Hz , Condition: Running
AA05/090825/
Complete Line
AA05/280725D/TL-L/C/
BL GC15
AA05/280725D/TL-L/C/
First passage GC15 with AL
AA05/280725D/TL-L/C/
Second Passage GC15 with 2 in 2
AA05/280725D/TL-L/C/
Third Passage GV20 2 in 2
AA05/280725D/OI-L/C/
Fourth Passage GV20 4 in 2
AA05/280725D/PL-L/C/
Roving RF2B
All the machines will be in very good condition!
AG60/060825D/CT.O-L/F/AT/
Volkmann 2×1 Twisting VTS08
Quantity: 2, Year: 1997, 192 positions each, Pot dia. 170 mm., exit 6″, conicity 4°20′, automatic discharge, Magitex blower. Diameter: 16.0 cm, High: 17.4 cm.
Dismantling by Tech people and loading could be we need 4 containers. Machines are in very Good shape and very Good conditions, stopped July 2025, they have also some spare parts.
AG41/040825E/S-A/M/BT/
Volkmann Twister
Quantity: 4, Year: 1968, Spindles: 120, Guage: 245 mm, Delivery 4’20, Area Needed(m): 18L*1.5W +2m Eachside, Average production: 500 Kg (Total:2000Kg), 5Nm-45-Nm. double feeding, Intake small cone, Output 4”20.
Machines are in production, in perfect condition.
AG41/040825E/S-A/M/BT/
Continua N.5 Spinning Machine
Quantity: 1, Made in Spain, Year: 1980, 416 Spindles, Ring Dia. 60, Spindle centre 60, Area Needed(m): 21L*1.5W +1.5M W Each side, Average production: 500Kg 2Nm-35Nm. Machines are in production, in perfect condition.
AG41/040825E/CY-C/M/BT/
Schlumberger BM14
Quantity: 1, Year: 1987, Low Twist, Area Needed(m): 15L*7W, Average production: 3200Kg, 64 spindles, Output: single, Gauge: 140mm. Machines are in production, in perfect condition.
AG33/040825/
Ratti Twisting
Quantity: 2, Year: 2000, Type R325N DT/120CE, 72 positions, 7″ diameter pot, 230 mm x 55 mm roll nose tube take up, 400 voltage.
AC94/300725/
Saurer Volkmann Carpet Cabling Twisters VTS 05-0-C
Quantity: 20, Year: 12×2006 – 2×2005 – 6×2003, 120 positions each.
AD81/290725E/RA.L-C/F/
SSM TW2-W BOBBIN WINDING MACHINES
Quantity: 5, 2008 MODEL – WITH TRAVERSE SYSTEM, Model: TW2-W, Origin: Switzerland, Voltage: 380 V, 50 Hz, Max Current: 32 A, Certified: CE, 96 Positions each, Total: 480 Positions, Equipped with traverse system
Condition:
Decommissioned from active use, Fully operational, Stored cleanly
Can be inspected on-site, Bobbin transfer, Pre-/Post-dyeing preparation, Yarn winding and rewinding
Advantages:High-precision traverse system, Reliable Swiss quality, High capacity with 5 machines
AD81/290725/
NSC GC12 Gillbox
Quantity: 1, Year: 1985, Model GC12, Type Gillbox with automatic can changer
Feeding system 12 slivers in cans, Delivery system 4 slivers into 4 cans (Ø 500 x 1200 mm high)
Additional features Automatic can changer with 4 can press units, Voltage 380V
Frequency / Phases 50 Hz / 3 phases
a high-output fiber drafting machine designed for efficient sliver processing and alignment.
This model feeds 12 slivers from cans and delivers 4 well-parallelized slivers into 4 large output cans (Ø 500 x 1200 mm). Equipped with an automatic can changer and 4 can press units, it ensures continuous operation and higher capacity per can. Ideal for large-scale fiber preparation in spinning or nonwoven lines.
AI56/280725/
Saurer Sclafhorst Autocoro 9 Open End
Quantity: 5, Year : 2017/2018, 480 Spindle, 4 Robots, Rotor Dia : T528, Combing Rolls : B174 DN.
AA05/280725D/YY.L-AI/M/AT/
Schlafhorst Autoconer X5
Quantity: 1, Year: 2011, 60 positions, 40 bobbin to cone and 20 cone to cone, magazine type, Thermosplicer, Uster Quantum 3 clearers, exit 6″, conicity 4°20′
Power 440V/60Hz, Machine doesn’t have FD and PP in clearer.
AF08/270725D/RL-O/F/CM
Ratti Two For One Twisting
Quantity: 2, Year: 2003, Model: R325N/100/10. NT260, POT DIAM 250mm, Cheese type, spindles diameter of 260 mm, take up tube of 230 mm, take up package of 5 Kg. Stopped at factory floor, machine was ready for loading.
AE51/260725/
Various Breaker, Twisting, Finisher,..
1x SCHLUMBERGER – model CF32S – Year: 1989 / EN 1808 / GUEBWILLER FRANCE
10x Twisting – YANTRA – produced by Saurer license / ALMA
1x SEYDEL 682 – Year: 1984
1x SEYDEL 761 – Year: 1982
1x Rebreaker NSC R5L10 – Year: 1988
1x NSC Gill Box GC13 – Year: 1988
1x SEYDEL 677
AD81/250725/
Hirschburger Winder
Quantity: 1, Type: SE 250 S, 1, 16 spindles, 10‘ traverse = 250mm, tubes 280mm, 3°30, for hanks 1,50-2,00m circumference, until 1.000g waxing device.
AB46/260725D/YI-AI/C/AR/
SSM Winder PS6D
Quantity: 1, Year: 2006, Make- SSM, Model- PS6 D doubler, 30 spindles, 8” traverse, 2 ply creel, Sohler OH cleaner
Note: This Assembly Winder was used for acrylic and woolen yarn.You can run cotton also with some setting alterations.
AB46/250725/AR/
Saurer Volkmann Twister VTS-070 compact
Quantity: 3, Year: 2003-2004, Type 6, 156 positions each, 8″ feed package, 6″ traverse cone, air threading, 1 with wax, Sohler blowers.
AC32/230725/
Complete Open End Spinning Plant
1x Saurer Open End, Type: BD320, Rotor: 320, Year: 2014, Rotor T40/0K40 N.
1x Saurer Open End, Type: BD400, Rotor: 400, Year: 2021, Rotor T34/0K40 N.
1x Saurer Open End, Type: BD380, Rotor: 320, Year: 2009, Rotor T54/0K40 N.
1x Taitan Open End, Type: TQF369, Rotor: 352, Year: 2018, Rotor T54/0K40 N.
2x Rieter Draw Frame, Type: RSB-D50, Year: 2020, Cans 400mm.
2x Rieter Draw Frame, Type: RSB-D50, Year: 2023, Cans 400mm.
2x Trutzschler Draw Frame, Type: TD03, Year: 2007, Cans 400mm.
9x Trutzschler Card, Type: TC03, Year: 2006, Cans 1000mm.
2x Trutzschler Card, Type: TC05, Year: 2006, Cans 1000mm.
Blow Room/ Processing Cotton-1:
1x Trutzschler Dusting.
1x Trutzschler Foreign fibre detector/ SP- FPU, Year: 2014.
1x Trutzschler Cleaner CL-C3, Year: 2007.
1x Trutzschler Univesa l Mixer, Year: 2006, 6 Chamber.
1x Trutzschler Pre-Cleaner CL-P, Year: 2007.
1x Trutzschler Bale Plucker, Year: 2008.
Blow Room/ Processing Cotton-2:
1x Saurer Jintan Dusting FA 100A, Year: 2019
1x Trutzschler Cleaner CL-C3, Year: 2006
1x Mixer, 4 Chamber
1x Trutzschler Pre-Cleaner CL-P, Year: 2004
1x Trutzschler Bale Opener BX26, Year: 2006
1x China Bale Plucker, Year: 2004
1x Saurer Jintan Dust Filter FA100A, Year: 2019
1x Jingshen-Saurer Moon Axial flow Opener/ JSB 102, Year: 2012
1x China Bale Pressor, Year: 2018
1x Uster UT5, Year: 2015
AB52/180725E/SP-P/F/
NSC GC15 Rebreaker R5A
Quantity: 1, Year: 1998, Elettronic Autoleveller link St Elois press for bumps diameter 600 mm.
AF74/230725/
Rieter Compact Ring Spinning Line with 45.696 Spindles
2 x Rieter complete blowrooms, year 2011
24 x Rieter C60 cards, year 2011
4 x Rieter C70 cards, year 2017
4 x Rieter SB-D45 breakers, year 2011
9 x Rieter RSB-D45 finishers, year 2011
1 x Rieter E26 Servolab automatic lab transportation, year 2011
3 x Rieter E35 Unilap lab formers, year 2011
1 x Rieter E36 Unilap lab former, year 2017
18 x Rieter E76 combers, year 2011
2 x Rieter E86 combers, year 2017
7 x Marzoli FTS-DN roving frames, year 2011, 192 spindles each
14 x UTIT roving transportation system, year 2011-2014
21 x Rieter K45 ComforSpin compact ring spinning frames, year 2011, 1632spindles each, ring diam. 38mm, gauge 70mm, tubes 190mm
7 x Rieter K46 ComforSpin compact ring spinning frames, year 2014, 1632spindles each, ring diam. 38mm, gauge 70mm, tubes 190mm
Linked to winders:
21 x Savio Polar I-DLS link winders, years 2011, 42 spindles each, UT3 clearing system**
7 x Savio Polar I-DLS link winders, years 2014, 42 spindles each, UT3 clearing system*
AA05/220725D/TP.L-AI/F/
WOOL BACK WASHING
Fleissner backwasher
Quantity: 1, Year 1987, 24 ball tops, 4 bowls
OMP vigro (vigoureux)
Quantity: 1, Year 1998
AB46/220725/
Saurer Allma Twisters
Year: 1985, Model -Saurer-Allma, Type ESP-X, Modified from original
Year: 1985, Model -Saurer-Allma, Type SM, Modified from original
AI63/210725/
Cotton Spinning Line
5x Ratti Two-for-One-Twister, Type: R 325 N, Year: 3×1998-2×2008, spindle pot diameter 180 mm, Spindel pitch 300 mm, No. Of Spindles: 3×144 1×24 1×96, cones Winding 85 x 210, cone length: 230 mm, Motor 22 KW- 1400 rpm, with pot Spindel: NT 180.
11x Rieter G33 Ring Spinning, Yer: 9×2000-1×2002-1×2003, Spindel type HP, 230mm Hülse, No. Spindels: 8×1008-2×432-1×144, Ring type 45mm, Fl 1.
1x Flyer coil transport system, Type: AKE, Year: 2005
1x Welker Vapofix Steaming device, Type: Welker Damper, Year: 1999
1x Cason Tube cleaning system, Type: Cason, Year: 2000
1x Roughness depth tester, Type: Spinnerei Göldner GmbH & Co.KG, Year: 2009
1x Pneumatic mounting press, Type: Spinnerei Göldner GmbH & Co.KG, Year: 2009
1x Spindle oiling device, Type: Spinnerei Göldner GmbH & Co. KG, Year: 2009
4x Murata Winders, Year: 2×2000-2×2002, positions: 3×60-1×40, Cleaner Type: 3x UQC iMK C15F23-1x UQC iMK C15F24, 2xKnoter, 4xSplicer, 1x Machine for spare parts, 2x with Uster Quantum 2, 1x without uster quantum 2.