AA02/030924/
Sulzer Rapier Weaving Looms, Dyeing and Finishing
AA02/030924D/YCT-CP/M/
55x SULZER RAPIER WEAVING LOOMS
26x SULZER RAPIER WEAVING LOOMS
Model G6200, Year 1999, 220cm Working width, Cam, 8 – 12 levers installed, 6 – 12 harnesses installed, Staubli Electronic Dobby – Model 2672, 530ppm Max, (4) Color filling selections, (2) Filling feeder per loom, On loom take up, Leno selvage.
29x SULZER RAPIER WEAVING LOOMS
Model G6200, Year 1998, 190cm Working width, Cam, 8 – 12 levers installed, 6 – 12 harnesses installed, Staubli Electronic Dobby – Model 2672, 530ppm Max, (4) Color filling selections, (2) Filling feeder per loom, On loom take up, Leno selvage.
AA02/030924D/CI-C/M/
3x SCHLAFHORST AUTOCONER 338 WINDING MACHINES
338 RM, 60 Spindles, Air splicers, Straight SS drums 2T, Loephe TK840 clearing, Empty bobbin at each section, Full package conveyor, Year (2) 1998 (1) 1999.
AA02/030924D/CCY-AY/M/
1x MONFORT HIGH EFFICIENCY TENTER FRAME
Model Montex 9-F TwinAir, 220cm rolls with / 200cm fabric width, Pin chain, Horizontal return, 9 Zone – Gas burners (set up for gas or change to propane), RA Moore control system, Kuster 4 dip saturator with nip roll and vac slot, Ten tone saturator exit nip, Mahlo weft straightener, Water cooled stripper rollers and air plenum, Two roll surface winder and plaiter options at exit, Year 1999.
AA02/030924D/RR-R/M/
2x ZONCO BATCH ROPE FULLING/MILLING MACHINES
Model Flexicom 800, 4 Channels, Year 1999.
AA02/030924D/RR-R/M/
2x ZONCO BATCH ROPE SCOURING MACHINES
Model Flexirapid 600, 15 Channels, Year: 1998.
AA02/030924D/CC-C/M/
1x BIELLA VULCO WOOLEN / CRAB
220cm, Year 1998.
AA02/030924D/RAT-CA/M/
1x CIMI OPEN WIDTH WASHER
Model Lavanova Superfix Rotordry
220cm rolls width
200cm fabric width
AC with inverters motors, JBox, Corino entry
(2) Prescour tanks with squeeze roll
(2) Scour tanks with squeeze roll
(1) Soap tank with squeeze roll
(1) Scour tank with squeeze roll
(1) Large rinse tank with squeeze roll
(1) Small thermic shock rinse tank with high pressure (15 ton)
(9) Wash boxes
(2) Steam chambers
(18) Can elevated dry can section (in line, run with or without)
Crabbing / Setting tank section with added steam coils, Continuous plater doff system, Pin chain controls fabric thru the 4 pass dryer, Year 1998.
AA02/030924D/YR-Y/M/
1x LAFER SUEDING MACHINE
AA02/030924D/AIO-O/M/
2x IRA GRIFFIN SLASHER SIZING MACHINES
Year 1998, 30 Dry cans, Motorized creel movement, Overhead hoist, Headway for 220cm beam, With Size kitchen, 4 Size boxes.
AA02/030924D/CI-C/M/
2x GASTON COUNTY FUTURA SAMPLE DYE LABS
Model: Ultra Soft, 3 Rolls / 220cm working width, Year 2015, Voltage 400v, Frequency 50hz.
AA02/030924D/TY-Y/M/
4x MORTON DYE BECKS
AE56/030924/
Itema R9500 Loom
Quantity: 1, Year: 2017, Staubli S3020, Width 230cm, 8 frame, 4 feeder, 1 beam 1 roller.
AF16/290824/
Picanol Gammax
Quantity: 13, Year: 2003, width:220 cm gc type with staubli dobby 20 shaft -(16 installed), All looms has orjinal eldec system
For each looms;-3 accumulators-1,5 beam-1,5 cloth roller-10 frames-5000 droppers and heedles
AC03/280824/
Sulzer G6500 B220 N8 And N4 SP
Quantity: 10 , Year: 2006, width : 2200 mm,4 Colours
all 22 Fimtextile Dobby type SP7 Year 2006 With 16 SHAFTS only one loom Staubli dobby 2670 B/2 20 shafts 8 colors
Accessories per loom:
1.5 beams; 4 feeders; 8/10 heald frames, with batcher
AA02/280824/AN/
New & Never Used Industrial Fabric Plant
AA02/280824E/CTL-CI/M/
Sectional Warping:
1x BRAND NEW UKIL HEAVY DUTY SECTIONAL WARPING MACHINE
Model UI-505SI eXpert
Year of Manufacture 2020
3800mm Maximum Warping Width
2400mm Cone Length
5 deg incline angle
300 meter per min Max Warping Speed
600N Warping Tenmsion
Maximum Section Width 600mm
Single Roller Beaming Stand
Maximum Beam Flange Diameter 1000mm
Maximum Beaming Speed 100MPM
Maximum Beaming Tension 1300 kg
Full computer control
With
1x UKIL Automatic Leasing Stand
Model eXpert Leaser
One touch operation
With
1x UKIL Roll Off Creel
312 ends total
6 rows High x 13 Long
Arranged in 2 banks Double sided
Unrolled Packages
270mm package centers vertical and horizontal
UKIL Tension units Type CRG-200F
Max Tension capacity 200 grams per end
Drop wire broken end detectors
Static eliminator bar at the creel front
AA02/280824E/ARCP-TR/F/
Weaving:
15x Brand New PICANOL Rapier Looms
Type OptiMax-I – 4P-380
Year of Manufacture October 2020
Working width 380cm
4 color weft electors
Staubli Positive Cam Shedding
Type 1692 with 8 lever capacity
8 Levers and * cams Installed
Off Loom Take up Type PBM3-C380
Single Beam Execution
Electronic Let Off 1000mm beam diameter
With Double Back Rest Roller Tensioning
With TSF Electronic sensoring
Sumo Econo Drive
Electronic Take up
ELSY Selvedge units
Each Machine Supplied with
1 Warp Beam
1 Batcher PBM3-C380
4 Weft Feeders – IRO Chrono X3
8 Harness frames with DRC30 connections
1 Grob Warp Stop Motion type KFW 5601
Heddle Wires
Dropper wires
AA02/280824E/LS-R/F/
Weave Preparation:
1x NEW STAUBLI WARP TYPE HEAD – HEAVY INDUSTRAL YARNS
Model Magna T12
Year of Manufacture 2020
Lease to Lease operation
With
1x New STAUBLI Warp Tying Frame
4-meter wide
AA02/280824E/YA-C/F/
1x NEW HYDRAULIC BEAM / PATTERN LIFTER
Year of Manufacture 2020
Battery Operated
Personnel walk behind
Maximum warp width 4 meter
With Beam lifting arms
Maximum Flange Diameter 100mm
Maximum Frame capacity 20 Harness Frames
AA02/280824E/RAI-AL/F/
CIRCULAR WEAVING:
4x STARLINGER CIRCULAR WEAVING LOOMS (NEW)
Type: FX 8
Year: 2018
Range: continuous tubular or flat fabric in PP or HDPE
Thread count: 1680
Creel positions: 1728
Number of shuttles: 8
Weave speed (max.): 850 rpm
Weft density: 20-75 /10 cm
Warp/weft bobbin inner diameter: 35 mm
Length of warp/weft bobbin: 218 mm
Maximum diameter over warp: 180 mm
Maximum weft diameter: 120 mm
Winding roll diameter: 1200 mm
with Web take-off device
with Electric lubrication device
with SmartTRONIC machine controller
with Machine evaluation system
AA02/280824E/OS-Y/F/
59,000 NEW STARLINGER Dura Core Bobbins
AA02/280824E/CII-AI/F/
LIFTING STRAP MANUFACTURING:
7x AMTRAC Needle Looms
Model 4-75, 4 Head, 75mm wide tapes, Year 2019
9x AMTRAC Needle Looms
Model 6-50, 6 Head, 50mm wide tapes, Year 2019
1x AMTRAC Needle Looms
Model 8-30, 8 Head, 30mm wide tapes, Year 2019
AA02/280824E/TP-R/F/
PP TAPE TWISTING FOR SEWING
1x STC Spinnzwirn (Starlinger Group) Two for One Twister
Model DD 2000
Year 2019
4 Position
Double Sided 2 position per side
Enclosed Pot position
With lubrication
Pot Diameter up to 350mm
Take up Package tube length 330mm
Maximum Bobbin Diameter 320mm
500 – 16,000 Denier Range
20 to 150 turns per meter
Take up speed 70 to 500 meter per min
AA02/280824E/LOC-CO/F/
SEWING PLANT:
One Lot of 49 Heavy Gauge Industrial Sewing Machines
Industrial Canvas, Lifting Straps etc
Comprising of:
2x JUKI Industrial Sewing Machines
Model LU151N70BBZZ/M51NSC922AN/CP180C, With sewing table and stand, Year 2019
7x JUKI Industrial Sewing Machines
Model LU151N70BBZZ/M51NSC922AN/CP180C, With sewing table and stand, Year 2019
10x UNION SPECIAL Industrial Sewing Machines
Model 81300B2, 2 Needle, With sewing tables and stands, Year 2019
10x UNION SPECIAL Industrial Sewing Machines
Model 81300B2, 1 Needle, With sewing tables and stands, Year 2019
10x UNION SPECIAL Industrial Sewing Machines
Model 56100MZ27BT, 1 Needle, With sewing tables and stands, Year 2019
10x UNION SPECIAL Industrial Sewing Machines
Model 80700C4, 1 Needle, With sewing tables and stands, Year 2019
AA02/280824E/CTC-AC/F/
BAG PRINTING & PACKAGING LINE
1x POLYTEK Bag Printing and Packing Line
Nominal Working width 1600mm, Year 2022
Comprising of:
2x POLYTEK Belt Cutting and Marking Machine
Model BCM.1200, Year 2022
1x POLYTEK Big Bag Flexographic Printer
Type FP1600 N, With 4 colors and 4 print heads, With Drying
1x POLYTEK Bag Cutting and Holding Machine
Model CH2200D, Year 2022
2x POLYTEK Vertical Balers
Type BP.2400, Hydraulic, 24 Ton, 8 KW, 200 Bar, Year 2022
5x POLYTEK Hand Wrapping Machines
Model Strapex, Year 2022
2x ROBOPAC Stretch Wrappers
Model Ecoplast KP, Turntable 30 inch diameter, Plastic Stretch wrap holder, Motor foo control, Year 2022
AA02/280824E/RYC-AO/F/
WASTE / TAPE RECYCLING LINE
1x STARLINGER Plastic Re-Cycling Line
Model RecoStar Universal 65
Year Of Manufacture 2019
Recycling of Industrial Polymer waste
Non Wovens
Film, Lump and fiber
PP, PE, PS, PA, PES, PET, PPS, PLA and others
Into pelletized Chips
No Pre Cutting is Necessary
Conveyor Feed
Internal Shredder with rotary and stationary knives
Out put 150 to 1300 Kg Per Hour
Energy Consumption 0.2 to 0.35 KWh/kg
Extruder Screw Diameters 65 (24,40) mm
Process
Feeding of Material via inclined conveyor
Edge Trim Cyclone
Cutting with single shaft cutter
Feeding ro single screw extruder
De-Gassing to purify the melt of contaminants.
Filtration of the melt without back flushing
Automatic Pelletizing
Storage silo
AA02/280824E/RO-C/F/
AIR COMPRESSORS ETC:
1x SCC Air Compressor
Model Focus22, 22 KW, Year 2021, Tolpec Gmbh, Germany
1x SCC Air Drier
Model DR330, Year 2021, Tolpec Gmbh, Germany
1x Shamal Air Compressor
Model 2.2 0.8 ES, Year 2021, 2.2 kw (3 HP), 8 Bar, With combined drier and air receiving tank, Shamal, Italy
1x Shamal Air Compressor
Model 22 0.8 VS, Year 2021, 22KW, 8 Bar
2x Vertical Air Receiving Tanks
Model RV900, Year 2021, Kharkiv Plant & Machinery, Ukraine
1x IPC Gasnow Floor Scrubber
Model CT160, Year 2018, IP Cleaning srl, Italy
Warranty Disclaimer
This is a sale of pre-owned goods which are being sold "as is" and "with all faults", and purchaser
acknowledges that there is no implied warranty that the goods shall be merchantable, or any implied
warranty that the goods shall be fit for any particular purpose, the purchaser acknowledges that it has
inspected the goods to its satisfaction, that it is not relying on the seller's skill or judgment to select or furnish
goods suitable for any particular purpose, and that there are no warranties which extend beyond the
description of the goods on the face of this invoice.
AA02/250824/
Toyota JAT810 Air Jet Looms
AA02/250824E/RT.P/M/
TOYOTA Air Jet Looms
Quantity: 12 , Year: 2018, Model JAT.810
Type JA2S-280CS-ET-T810, 280cm weaving width, 2 color, 4 shaft Plain Crank Shedding, Side Tuckers
On Loom Take up, Full Beam Execution, Double Back Rest Rollers
Each loom supplied with, 1.5 Warp Beams, 1,5 Cloth Rollers, 4 Harness Frames, 2 Weft Feeders, Heald and Droppers as installed
AA02/250824E/YS.P/M/
TOYOTA Air Jet Looms
Quantity: 12 , Year: 2018, Model JAT.810 – Euro Tech, Type JA2S-280TP-ET-T810
280cm weaving width, 2 color
10 shaft Positive Staubli Cam Shedding, Model 1781A.e3.DRC
Side Tuckers, On Loom Take up, Full Beam Execution, Double Back Rest Rollers
Each loom supplied with, 1.5 Warp Beams, 1,5 Cloth Rollers
8 Harness Frames, 2 Weft Feeders, Heald and Droppers as installed
AA02/250824E/YC.P/M/
TOYOTA Air Jet Looms
Quantity: 4 , Year: 2018, Model JAT.810 – Euro Tech, Type JA2S-340CS-ET-T810
340cm weaving width, 2 color, 4 shaft Plain Crank Shedding
Side Tuckers, On Loom Take up, Full Beam Execution, Double Back Rest Rollers
Each loom supplied with, 1.5 Warp Beams, 1,5 Cloth Rollers, 4 Harness Frames, 2 Weft Feeders, Heald and Droppers as installed
AA02/250824E/LC.P/M/
TOYOTA Air Jet Looms
Quantity: 4 , Year: 2018, Model JAT.810 – Euro Tech, Type JA2S-340TP-ET-T810, 340cm weaving width
2 color, 10 shaft Positive Staubli Cam Shedding, Model 1781A.e3.DRC
Side Tuckers, On Loom Take up, Full Beam Execution
Double Back Rest Rollers, Each loom supplied with, 1.5 Warp Beams, 1,5 Cloth Rollers
8 Harness Frames, 2 Weft Feeders, Heald and Droppers as installed
AA02/250824E/LT.P/M/
TOYOTA Air Jet Looms
Quantity: 4 , Year: 2018, Model JAT.810 – Euro Tech, Type JA2S-360TP-ET-T810
360cm weaving width, 2 color, 10 shaft Positive Staubli Cam Shedding, Model 1781A.e3.DRC
Side Tuckers, On Loom Take up, Full Beam Execution, Double Back Rest Rollers, Each loom supplied with
1.5 Warp Beams, 1,5 Cloth Rollers, 8 Harness Frames, 2 Weft Feeders, Heald and Droppers as installed
AI18/200824/AS/
Complete Fabric Weaving Line
17x Optimax-i 220 cm, Year: 1.04.2016, 3060 dobby 16 foot.
1x Gammax 220 cm, Year: 1.11.2002, 2800 dobby 16 foot.
5x Gammax 220 cm, Year: 1.11.2003, 2800 dobby 16 foot.
2x Gammax 220 cm, Year: 1.02.2004, 2800 dobby 16 foot.
1x Gammax 220 cm, Year: 1.03.2004, 2800 dobby 16 foot.
5x Gammax 220 cm, Year: 1.05.2004, 2800 dobby 16 foot.
18x Gammax 220 cm, Year: 1.10.2004, 2800 dobby 16 foot.
5x Gammax 220 cm, Year: 1.11.2004, 2800 dobby 16 foot.
5x Gammax 220 cm, Year: 1.03.2005, 2800 dobby 16 foot.
1x Conical Warp machine and all parts, Ben-ErgoTronik, Year: 1998
1x Drawing in machine and all parts, Delta 1
1x Warp Knot machine and all parts, Year: 1.01.2016, Staubli
1x Warp Knot machine and all parts, Staubli
1x Warp Knot machine and all parts, Year: 1.01.2016, Uster Topmatic
6x Fabric Control Machine, Year: 1.01.2020
The entire facility is fully operational. There is nothing missing.
AI18/130624E/RR-R/M/AS/
17x Optimax i Looms
AI18/130624E/AO.L-A.L/M/AS/
42x Gammax Looms
AB60/190824/
Picanol GAMMAX Rapier Looms
Quantity: 4, Year: 2003, Type: GAMMAX, Loom width: 220, Dobby type: staubli 2670, Dobby max frames: 16, Installed frames: 12, No of colors: 8, No of cloth panel: 1, Insertion type: Rapier, Inserion model: free flight, Weft cutter: mechanical, leno or tuck in: leno, Take up: in loom, Cloth roller diameter: 550 mm, Warp beam diameter: 800 mm, Drop wires: 6000, Headles: 6000, Max speed: 400 rpm, Warp stop: 6 bars, Weft motors: IRO Chrono X3, Extra: staubli jacquart JC5, 2x modified to LDEC Plus by Picanol.
AF16/170824/
Somet Super Excel Looms
Quantity: 8
4x Year: 1998, width: 340 cm, (with double beam system)with staubli cx960 – 5120hooks jc5 controller.
4x Year: 1995, width: 340 cm, ready for jacquard with double beam system.
For each looms: 4 pcs accumulators, 12 colours, 2 warp beam, 2 cloth roller, 10.000 pcs droppers, harness
AA05/130824/AT/
Sulzer Rapier Weaving Looms
Quantity: 55, Model: G6200
26x Year: 1999, 220 Cm Working width.
29x Year: 1998, 190 Cm Working width.
Cam, 8-12 levers installed, 6-12 harnesses installed, Staubli Electronic dobby – Model 276, 530 ppm Max, 4 color filling selections, 2 Filling feeder per loom, On loom take up, Leno selvage.
AF16/140824/
Dornier HTVS6/S Looms
Quantity: 16, Year: 1995-1996, Width:220 cm, With staubli dobby 20 shafts all installed.
For each looms: 12 frames, 4 ecs, 4 accumulators, 1,5 beam, 1,5 cloth roller, 5000 heedles and droppers. (All machine has tuckin device right and left )
AF16/060824/
Dornier HTVS6/S
-4 pcs Dornier htvs6/s year :1997 width:220 cm with staubli dobby 20 shafts all installed
-4 pcs Dornier htvs 6/s year :1995 width:220 cm with staubli dobby 20 shafts all installed
For each looms;
-10 frames-4 ecs-4 accumulators-1,5 beam-1,5 cloth roller-5000 heedles and droppers
AC63/080824D/RA.L-R/F/BO/
Picanol Rapier Looms
Quantity: 40, Year: 20×2014-20×2015, Model Optimax, Made in Belgium, Width 210 cm, Weft 4 Color : – With 4 Weft Accumulator (IRO) – With Quick Step, Shedding : – Staubli Dobby – Model S3020 – Shedding Loom 14 – Harness Frame 10 (APF 124 Frames). ELSY LHS & RHS, Double Press on Take-Up, Warp Stop Motion (Grob) (6 Electrode), Double Backrest Roller, Warp Beam Dia (1000), Healds and Dropper as on Loom, Weft Bobbin Stand Suitable For 8 Bobbins, Independent Display Stand (Interactive), Batching Motion, Voltage 380V – 50 Hz. Looms are almost new, say %96 like new, customers can test run before dismantling.
AC94/080824/
Wide Weaving Plant
4x PICANOL Rapier Loom type Optimax-8-J 340 – 2007 yr.
2 x 2011 year w/ Staübli Super Jumbo jacquard type LX 3202 – 14,336 hooks capacity
2 x 2016 year w/ Staübli jacquard type LX 1602 – 2688 hook capacity
FF (Free Flight) Rapier execution, Type Elsy electronic leno, 8 color weft.
22x PICANOL Rapier Loom type Gammax – 8 J 340 – 2005 year
Staübli jacquard type LX 1600B (2005 year) – 2688 hook capacity, FF (Free Flight) Rapier execution, Type Elsy electronic leno, 8 color weft.
11x PICANOL Rapier Loom type Gammax – 8 R 340 – 2003 ~ 2006 year
Staübli dobby type 2861 – 20 harness cap/18 installed, FF (Free Flight) Rapier execution, Type Elsy electronic leno, 8 color weft.
2x PICANOL Rapier Loom type Gammax – 8 J 340 – 2005 year
2016 year w/ Staübli jacquards type LX 1602 – 2688 hook capacity, FF (Free Flight) Rapier execution, Type Elsy electronic leno, 8 color weft.
1x PICANOL Rapier Loom type Optimax-8-J-190 – 2007 year
Staübli jacquard type LX 1600 – 2688 hook capacity, FF (Free Flight) Rapier execution, Type Elsy electronic leno, 8 color weft.
2x PICANOL Rapier Loom type Gammax – 4 R 220 – 2005 year
Staübli dobby type 2861 – 20 harness cap/20 installed, FF (Free Flight) Rapier execution, Type Elsy electronic leno, 8 color weft.
2x PICANOL Rapier Loom type Gamma – 4 R 220 – 2003/2005 year
Staübli dobby type 2670, Type Elsy electronic leno, 4 color weft.
8x PICANOL Airjet Looms
1 x Type OMP 800F 8 J 340 w/ LX 1600B jacquard – 2005 yr
2 x Type OMP 6 J 340 w/ LX 1600B jacquard – 2000 yr
1 x Type OMP 4 R 280 w/ 2871 dobby – 2001 yr
1 x Type Omni F 6 J 340 x/ Bonas jacquard (2005 yr)
3 x Type Omni 4 R 220 W/ 2861 dobby – 1999 yr
2x ATLAS COPCO Air Compressors type 160 VSD – 2021 yr
160 HP, Air Dryers.
AF16/060824/
Somet Alpha Pga Looms
Quantity: 10, Year: 2006, Width:340 cm, With staubli Lx1600B-3072 jc5 controller.
For each looms: 4 pcs accumulators, 8 colours, 1,5 warp beam, 1,5 cloth roller, 10.000 pcs droppers, harness 60 ends.
AA02/060824D/P.L-A/F/
Sulzer Rapier Weaving Looms
Quantity: 29, Year: 1998, Model G6200, 190cm Working width, Cam, 8 – 12 levers installed, 6 – 12 harnesses installed, Staubli Electronic Dobby – Model 276, 530ppm Max, (4) Color filling selections, (2) Filling feeder per loom, On loom take up, Leno selvage.
AA02/080824/AS/
Picanol Optimax Rapier Looms
Quantity: 108
AA02/070824E/LL-R/M/AS/
58x PICANOL Rapier Looms:
Model OptiMax, Year: 2016, 220cm weaving width, Free Flight Rapiers, 8 Color weft selection, Staubli Electronic Dobby, Model S.3020, 20 Levers installed (16), 18 Levers installed (12), 16 Levers installed (42), Leno selvedges, Each machine supplied with: 1.5 Warp beams 800MM dia, 1.5 Cloth rollers, 10 Harness frames, 4 Pre Feeders, 6000 Heald wires, 6000 Dropper wires.
AA02/070824E/LL.L-R/M/AS/
26x PICANOL Rapier Looms
Model OptiMax, Year: 2017, 220cm weaving width, Free Flight Rapiers, 8 Color weft selection, Staubli Electronic Dobby, Model S.3020, 16 Levers installed, Leno selvedges, Each machine supplied with: 1.5 Warp beams 800MM dia, 1.5 Cloth rollers, 10 Harness frames, 4 Pre Feeders, 6000 Heald wires, 6000 Dropper wires.
AA02/070824E/LL-R/M/AS/
24x PICANOL Rapier Looms
Model OptiMax, Year: 2017, 220cm weaving width, GC Rapiers, 8 Color weft selection, Staubli Electronic Dobby, Model S.3020, 16 Levers installed, Leno selvedges, Each machine supplied with: 1.5 Warp beams 800MM dia, 1.5 Cloth rollers, 10 Harness frames, 4 Pre Feeders, 6000 Heald wires, 6000 Dropper wires.
Looms are in Production
AC63/020824/BO/
Machines for Denim Plant
Monfort Sanforizing
Year: 1991, Made in Germany, Double Palmer Roller, With Tentering Device
With Padder and Platter, 2 Drying Cylinder, With Cloth Guider 2
With Tank 3, Width Blanket 190 cm, Voltage 380V – 50 Hz
2 Panon Washing Machine
Year: 2004, Width 200 cm, Made in Taiwan, 24 Drying Cylinder
9 Washing Tank, 9 Padder, 30 Roll For Oxidate, With AC Drive
Warping Machine
Model Benninger 1250 BD, Year: 1995, Width 180 cm, Made in Switzerland
Creel Capacity 468, Creel Type V, With Warping Beam 30, Voltage 380V – 50 Hz
Warping Machine
Model Zell Benninger, Year: 1990, Width 180 cm
Creel capacity 640, Creel type V, Made in Switzerland
Including Warping Beam 40 pcs., Voltage 380V – 50 Hz
Cibitex Sanforizing Machine
Year: 2013, Made in Italy, With Bianco
Roller Width 200 cm, Working Width 180 cm, 12 Drying Cylinder, Voltage 380V – 50 Hz
2 Vamatex Machines
Year: 2013, Made in China, Width 210 cm, IRO Luna, 2 Water Cooling, 2 Lever
Direct Warping Machine
480 Creel, 3 Benninger, HeadStock West Point
With Ball Warper :Year: 1997
Capacity 1500 / hour, Speed 20 RPM, Preparation for Rope Dyeing :
19 Left Tank, 13 Right Tank, Each Tank with Padde
Looptex Slasher Machine
Year: 1990, Made in America, Width 166 cm
Capacity 24 Beam, 8 Tank, 8 Padder, 12 Cylinder + 14 Cylinder
Beam Storage 60 :
Year: 1990, Type KL, Merk Genkinger, Made in Germany, Sizing Take Up Roller
Panon Mercerizing
Width 280 cm, 24 Drying Cylinder, 8 Tank, 8 Padder, 15 Cylinder
IICC Washing Machine
30 Cylinders, 9 Tanks, Capacity 900 L / Tank
Stenter Machine
Monfort Montex, Year: 2007, Made in Germany
Horizontal Drive, 2 Drying Cylinder, With Platter, Mahlo Weft Straightener
8 Chamber, Pin Type, AC Drive, Working Width Max. 190 cm, Extra Coating Device (Rota Spray)
6 Drying Cylinder Extra, Voltage 380V – 50 Hz
40 Picanol Rapier Machines
Model Optimax, Year: 2014 (20 Machines), Year: 2015 (20 Machines),
Made in Belgium, Width 210 cm, Weft 4 Color : With 4 Weft Accumulator (IRO), With Quick Step
Shedding :Staubli Dobby, Model S3020, Shedding Loom 14, Harness Frame 10 (APF 124 Frames)
ELSY LHS & RHS, Double Press on Take-Up, Warp Stop Motion (Grob) (6 Electrode), Double Backrest Roller
Warp Beam Dia (1000), Healds and Dropper as on Loom
Weft Bobbin Stand Suitable For 8 Bobbins, Independent Display Stand (Interactive)
Batching Motion, Voltage 380V – 50 Hz
Karl Mayer Sizing Machine
Year: 2015, Made in Italy, With Double Size Box, Working Width 180 cm
12 Drying Cylinder, Capacity 2400 / hour, Total Beam 36, Speed 40 RPM
Ball Warper
Brand Benninger
Year: 1975, Made in Swiss, Number of Ball 103, Number of Machine 3, Type 10
Ball Warper
Brand Tema Komori, Year: 1981, Made in Japan, Number of Ball 90, Number of Machine 2, Type TB-500
Tema Komori Dyeing Machine
Type Tema Komori TID-240 / A1-80D, Year: 1981
Made in Japan, Ball Number 90, Number of Ball : in machine process 12-, 16 depend on code production
KTM KLEINEWEFERS Dyeing Machine
Type D970012, Year: 1997
Made in USA, Ball Number 103, Number of Ball : in machine process 18-, 24 depend on code production, Note : The ball that use in Dyeing Tema
Komori and KTM KLEINEWEFERS
– Belong to Ball Warper Machine of Tema
Komori and Benninger
– Type of Ball : Wooden Log
Sale As Complete Line Or Individually
AB46/020824/
Sulzer TW11 220” & Pu 220”
Quantity: 10 , 5 Sulzer TW11 220”, 5 Sulzer PU 220”
All looms have the following:
All PP looms converted to P7100 with speed up kit, Single color cam with 6 levers installed, 4 Leno heddles, 4 Grob harness frames
Off loom take up, MyLube automatic oiling system, Loepfe electronic stop motion, Electronic let off
Single width beam , 940 HD flange, Press Roll, Doffing
AB46/020824/
Sulzer PU 183” D12 looms
Quantity: 30 , Single color, Loepfe stop motion , Mylube automatic oiling system , Double whip rolls, Single width beam 940 mm HD flange , Off loom take up with press roll for PP fabric.
AH68/010824E/AY.L-C/F/BY/
Dornier Airjet Looms
Quantity: 4, Year: 2000, TYPE LWV 2/E, NOMINAL WIDTH 3.400 mm, 2 COLORS – predisposed for 4, STÄUBLI CAM MOTION TYPE 1768 with 8 LEVERS, TWIN BEAM EXECUTION for FLANGE DIA 800 mm, GROB WARP STOP MOTION with 6 BARS, BACK BAR with POSITIVE CONTROL.
ACCESSORIES each machine: 2 WEFTFEEDERS, 2 WARP BEAMS FLANGE DIA 800 mm, 1 BATCHING MOTION, 4 HEALD FRAMES, The looms are cleaned and rechecked. It have DIALOG PANEL 2.
AA02/030824D/PY-Y/M/AR/
Picanol Rapier Looms
1x Picanol Rapier Loom
Year: 1997, Type GTX, Working width 2800 mm, With Staubli Dobby, Type 2612, 8 Color Electronic Color Selector – Step Change Model, Leno Selvedges and Selvedge Cutters, Electronic Let off for 800mm beam capacity, Split beam execution with differential and 2 beam gears, Batcher. With Harness frames, Healds , droppers
(8) weft feeders and creel
10x Picanol Rapier Looms (predisposed for Jacquards
Type GTX & GTM-AS, Year: 1998 (4) – Year: 1996 (4) – Year: 1993 (2) – Year and 1996, 1900 mm working with (8), 2800mm working width (2), Prepared for jacquards, 8 Color Electronic Color Selector – Step Change Model, Leno Selvedges and Selvedge Cutters, Electronic Let off 1000mm beam capacity, Batchers
Every Loom is equipped with: Warp Beam, Batcher, (8) weft Feeders, Creel stand, Droppers Bars, Dropper wires, And jacquard harnesses (un hooked not cut)
10x Bonas Electronic Jacquards,
Model IBJ (8)- Model ASJ (2) – 2688 Hook Format (8) – 4032 Hook Format (2), With gantry mounting brackets and adjustable chairs, Model 200 Controllers (2) – Model 250 Controller (8)
Year 1998 (4) – Year 1996 (4) Year 1993 (2)
1x Large Lot of Spare Parts
Electrical and Mechanical, New and Used, Loom and Jacquard.
Without Gantries
Need 11 x 40 feet containers for loading.
AA02/020824E/SO-P/M/BY/
Picanol Rapier Weaving Loom
Quantity: 1, Year: Manufacture 2022 installed Jan 2023, Model OptiMax-i- Connect, Used for one Trial Only
340 cm Weaving Width, Staubli Electronic Dobby, Model S.3020e3, 20 Levers installed DRC connection
Picanol i-connect control and communication.
ELSY Leno Selvedges, 8 Color Weft Selection, On Loom Cloth roller take up, Split Beam execution, Complete with
4 Half Warp beams with 1000mm diameter Flanges, 4 Cloth rollers, 1 Weft filling stand, 8 IRO Chrono X3 filling feeders, 30 Harness frames and wires, 6 Dropper bars and wires
AG54/300724/
Sulzer looms
Quantity: 3 , Year 1995, Model G6200 220N8J,1000 diameter beams,
6x Bonas jacquard ASJ4 (3x double head),
AE56/290724/
Panter Rapier Looms
Quantity: 15
280cm 5 set, Year: 2013
340cm 4 set, Year: 2021
360cm 4 set, Year: 2012
380cm 2 set, Year: 2015
AA10/270724/
SULZER Weaving looms
Quantity: 15, Year 2000 (10 machines) and year 1999 (5 machines)
Type G6200 W220 N6 SP
6 Colours, working width 220 cm, STAUBLI Dobby 2670 for 16 shafts
AA10/270724/
SOMET looms
Quantity: 6, Years 2001/ 2000/ 1999/ 1989/ 1988/ 1987,
Type SUPER EXCEL and MASTER SM 93
widths 2800 /3000/ 3200/ 3400, cams and dobby
AA02/270724/
Somet Rapier Jacquard Looms
Somet Rapier Jacquard Looms
Quantity: 8, Year: 4×1999, 4×2000, Model Super Excel, 340cm weaving width, 12 color weft insertion, Staubli Jacquard
Model LX5120, 5120 hooks installed, JC5 Controller, Double beams, Supplied with, 3 Warp Beams, 2 Cloth rollers, 4 Weft feeders
Somet Rapier Jacquard Looms
Quantity: 4, Year: 1998, Model Super Excel, 340cm weaving width, 12 color weft insertion, Staubli Jacquard, Model CX960, 5120 hooks installed
JC5 Controller, Double beams, Supplied with, 3 Warp Beams, 2 Cloth rollers, 4 Weft feeders
Somet Rapier Jacquard Looms
Quantity: 4, Year: 2003, Model Alpha (Green)
340cm weaving width, 12 color weft insertion, Staubli Jacquard, Model DX1600B, 5120 hooks installed
JC5 Controller, Double beams, Supplied with, 3 Warp Beams, 2 Cloth rollers, 4 Weft feeders
Somet Rapier Jacquard Looms
Quantity: 4, Year: 1995, Model Excel, 340cm weaving width, 12 color weft insertion, Predisposed for Jacquard
Without Jacquard, Double beams, Supplied with, 3 Warp Beams, 2 Cloth rollers, 4 Weft feeders
AB52/130624/
Sulzer Ruti G6500 Rapier Looms
Quantity: 8, Years: 2007-2008, Types: G6500, Type : G6500 B190 N4 SP, Nominal width : 1900 mm, 4 Colours, Fimtextile Dobby type SP7 With 16 SHAFTS.
Accesories per looms: 1.5 beams; 4 feedes; 10 heald frames.
AB46/220724/
Dornier HTN 8/J Looms
Quantity: 5, Year: 1988, Model: HTN 8/J, Working Width: 180cm, Ready for Jacquards, Feeder : 8, Take up: on loom Cloth Roll, Pannel : EDU, Warp Stop Motion: 6 bar, Top Beam Arrangement: 4 machine with top beam arrangement.
AE02/200724/AN/
Sulzer P 7100 S220 N4 SP R D12 Looms
Quantity: 2, Year: 1989, ww. 2200 mm, Stäubli dobby 2665.
AE02/200724/AN/
Sulzer Jacquard Looms G6300
Quantity: 2, Year: 2004, ww. 1900 mm, Stäubli jacquard LX 1600B, 2688 hooks, free flight.
AE02/200724/AN/
Picanol Airjet OMP-800F-8-J-2300 Loom
Quantity: 1, Year: 2005, ww. 3400 mm, Stäubli jacquard LX 1600B, 2688 hook.
AE02/200724/AN/
Picanol Optimax-8-J-1900 Loom
Quantity: 1, Year: 2007, ww. 1900 mm, Stäubli jacquard LX 1600, 2688 hooks, free flight.
AE02/200724/AN/
Picanol Gammax-8-J-1900 Loom
Quantity: 1, Year: 2005, ww. 1900 mm, Stäubli jacquard LX 1600B, 2688 hooks, free flight.
AH02/190724/
Vamatex Looms
Quantity: 3
2x VAMATEX P1001 ES WIDTH 340 cm, YEAR 1998/2000:
EQUIPPED WITH STAUBLI JACQUARD CX870 CAPACITY 2688 HOOKS, CONTROLLER JC5, YEAR 1998.
Each loom equipped with: 08 COLORS, 03 WEFT FEEDERS, 1.5 BEAMS, 1.5 CLOTH ROLLERS, HARNESS INCLUDED.
1x VAMATEX LEONARDO WIDTH 340 cm, YEAR 1999:
EQUIPPED WITH STAUBLI JACQUARD LX3200 CAPACITY 12000 HOOKS BUT INSTALLED 10177 HOOKS, CONTROLLER JC5, YEAR 1999.
Each loom equipped with: 08 COLORS, 05 WEFT FEEDERS, 02 BEAMS, 02 CLOTH ROLLERS, HARNESS INCLUDED, EQUIPPED WITH UPPER BEAM SYSTEM.
AB86/190724/
Dornier HTV4/J Jacquard Looms
Quantity: 2, Year: 1999, 3,40 M.
Equipped with: Painel 2, 4 Colours, installed 3 colours, Electronic Jacquard STAUBLI LX1600, Controller JC5, 3072 hooks, 4 Weft Feeders IRO, 2 Twin Beams, 2 Cloth Roller, Droppers fixed on looms , Machines in TOP condition.
AB51/160724/
Sulzer G6500 B220 SP Looms
Quantity: 23, Year: 2006, Working width 2200 mm.
n. 22 sets with Fimtextile dobby type SP7 with 16 shafts and 4 colors
n. 01 sets with Staubli dobby type 2670 B/2 with 20 shafts and 8 colors
Each loom is equipped with the following accessories:
n. 1.5 beams
n. 04 weft feeders
n. 8/10 heald frames
Batching motion, Droppers and wires.
AF16/160724/
Somet Alpha Looms
Quantity: 8, Year: 2003, Width:340 cm, With (4 pcs staubli +10 pcs fimtextile )dobby 16 shafts.
For each looms: 3 accumulators, 8 colours, 1,5 beam, 1,5 cloth roller, 10 frames, 10.000 droppers and heedles.
AF16/110724/
Picanol Optimax Looms
Quantity: 4, Year: 2013, 220 cm, With staubli dobby 18 shaft.
For each looms: 4 accumulators, 8 colours, 10 frames, 1,5 beam, 1,5 cloth roller, 10.000 droppers and heedles.
AF16/110724E/YS.L-R.L/M/AS/
Dornier PTS8/S Looms
Quantity: 8, Year :2004, Width:220 cm, With staubli dobby 20 shafts(18 installed), 10 frames, 4 ecs, 4 accumulators, 1,5 beam, 5000 heedles and droppers.
They produced woven fabric, Only 2 last years they produces upholyestry.
AB52/090724/
Dornier PTV Rapier Looms
Quantity: 2, Year: 2002, Type : PTV 8/S, Width : 230 cm, 8 colours (predisposed), Staubli dobby 2861/2; 20 levers installed ; batching.
Each loom equipped with : 4 ECS and 3 weft accumulators; 10 frames; 1 beam; 1 batcher.
AB52/090724/
Picanol Optimax-8-R Rapier Looms
Quantity: 3, Years: 2007/2008, Type: OPTIMAX 8R. Width: 250 cm. 8 colors. Staubli 2861 Dobby in 20 shafts capacity. 14 levers installed. Rapier type: free flight. Machines with SUMO engine and LDEC.
Acessories per machines: 3/4 iro luna x2 Weft feders ; 14 heald frames; 1.5 beams; Separated Batcher.
Machines in operation.
AB52/090724/AP/
Somet / Promatech Alpha PGA Rapier Looms
Quantity: 4, Years: 2010/2015, Types: ALPHA PGA, Width 3200 mm.
2x looms Alpha PGA year 2010, Staubli dobby with 16 shafts.
2x looms Alpha PGA year 2015, Staubli dobby with 20 shafts.
Each loom equipped with: 4 weft feeders, 10 frames, 1 beam, 1,5 cloth rollers, Still working.
AF16/070724E/CO-O/M/
Dornier Airjet AWS8/S Looms
Quantity: 4, Year: 2007, WW: 360cm, Type: AWS8/S, With staubli dobby-16 shafts.
For each looms: 8 accumulators, 8 colours, 1 beam, 1 cloth roller, 10 frames, 10.000 droppers and heedles.
Beams are 800mm. The looms dont have the external batcher.
AF16/060724/
Dornier HTVS 6/S Looms
Quantity: 4
2x Dornier htvs 6/s year :1994 width:200 cm with staubli dobby 20 levers all installed.
2x Dornier htvs 6/s year :1996 width:200 cm with staubli dobby 20 shafts all installed.
For each looms: 10 frames, 4 ecs, 4 accumulators, 1,5 beam, 5000 heedles and droppers.
AE02/020124/
Jacob Muller Narrow Fabric Looms
Quantity: 15
2x NF 53, 4/66, year 1997/99 (can also be modified to 8/27)
2x NF 42, 6/27, year 1997/99 (can also be modified to 2/66 or 4/45)
6x NF 53, 8/27, year 2005 (3) and 2006 (3)
1x NFJM2 53, 6/50, with 192 hooks, year 1999
1x NFJM2 53, 6/42, with 192 hooks, year 1999
2x NFJM2 53, 4/66, with 192 hooks, year 2000
1x NFJM2 53, 8/27, with 192 hooks, year 2000
All looms are cpl overhauled.
AH02/050724/AY/
Sulzer Ruti Terry Weaving Loom G6200
Quantity: 12
1x G6200 B220 F8J, H.2200mm, YEAR 1995, WITH JACQUARD STAUBLI CX870 , 1408 HOOKS, CONTROLLER JC5, YEAR 1998
1x G6200 B260 F8J, H.2600mm, YEAR 2000, WITH JACQUARD STAUBLI LX3200, 6144 HOOKS, CONTROLLER JC5, YEAR 2000
1x G6200 B260 F8J, H.2600mm, YEAR 2000, WITH JACQUARD STAUBLI LX3200, 6144 HOOKS, CONTROLLER JC5, YEAR 1998
1x G6200 B240 F6J, H.2400mm, YEAR 1997, WITH JACQUARD STAUBLI CX870 , 2688 HOOKS, CONTROLLER JC5, YEAR 1998
3x G6200 B260 F8J, H.2600mm, YEAR 1998, WITH JACQUARD STAUBLI LX3200, 6144 HOOKS, CONTROLLER JC5
1x G6200 B240 F6J, H.2400mm, YEAR 1997, WITH JACQUARD STAUBLI CX870 , 2688 HOOKS, CONTROLLER JC5, YEAR 1997
2x G6200 B260 F8J, H.2600mm, YEAR 1998, WITH JACQUARD STAUBLI CX870 , 2688 HOOKS, CONTROLLER JC5, YEAR 1998
AB60/030724/
Picanol Air Jet Weaving Loom OMNI plus 800-4-J-190
Quantity: 1, Year: 2009, Working width 1900mm, 4 colours installed.
With jacquard STAUBLI type SX2688 year of construction 2010, format 2688 hooks (installed complete; M6 modules)
Equipment : SUMO, ELO, ETU, PRA, AIRMASTER, 4 weft colours, 4 weft feeders PICANOL type 1131X2 with PFL and balloon breaker, feeder stand, bobbin creel, double warp tension rolls Ø 120mm with easing motion RHS&LHS, warp detection GROB with 6 detection bars, 5000 droppers, double pressure roll, air-tuckers RHS+LHS, warp beam Ø 1000mm, touchscreen, 2 steps, waste-system with dustbin, internal cloth roller, cloth roll, cardan axe, Controller STAUBLI JC6, maximum speed 900TPM, ELDEC, without harness.
AA02/080424E/ALP-AI/M/
Narrow Fabric Needle Looms
Quantity: 17
For Weaving Heavy Gauge Lifting Straps
Comprising of:
7x AMTRAC Needle Looms
Model 4-75, 4 Head, 75mm wide tapes, Year:2019
9x AMTRAC Needle Looms, Model 6-50, 6 Head, 50mm wide tapes, Year:2019
1x AMTRAC Needle Looms
Model 8-30, 8 Head, 30mm wide tapes, Year: 2019
Machines in Warehouse