*AE39/300626/
Jakob Muller Needle Looms
Quantity: 2, Year: 2007, Type: NF42 4/45 G year 2007
With double take off roller with steel for mid-heavy belt. With pressure roller with rubber, With 10 harness frame, With 4-14pick/cm, Invertor controller speed , With slow and fast speed, With binder system, With 4 contact rail, with re-direction roller, With stop motion, Condition: refurbished, clean and tested and ready to run on production.
*AE39/300626/
Jakob Muller Needle Looms
Quantity: 2, Year: 2000, Type: NFJM2 53 4/66 with 192 hooks
With new harness , With Uni controller from Floppy disk to USB converter , With rubber take down roller, With steel pressure roller , With 192 hooks , With 12 harness frame, With binder thread motion , With 8 repeat chain links , With slow motor, Machine condition: refurbished, clean, tested. ready to run on production.
AF98/300626D/L-A/F/BT/
Somet SM93 Looms
Quantity: 6, Year: 1993, Width 190 CM, Staubli Dobby 2232, 20 SHAFTS.
Accessories: 2 Accumulators, 6 Heald Frames, 1 Warp beam and 1.5 Cloth roll.
AA23/300626E/CP-C/F/BY/
Dobby Dornier Rapier Dobby PTS 8S Looms
Quantity: 16, Year: 2004, 220 cm, Eacch equipped, dobby Staubli 2670, 12 heqald frames, 8 weft feeders, 5 warp bars, 1.5 warp beams
Available in September 2026. Complete running , it is AT2
AA23/300626E/OO-L/F/BY/
Dornier Rapier Dobby TKN 12/5 Looms
Quantity: 2, Year: 2016, 360cm, Each equipped with:, Staubli dobby S3200, 8-10 heakd frames, 12 weft feeders Chronos, 3 split warp beams, Complete, running Available September 2026
AF74/300626E/CR-C/M/AS/
Picanol Optimax Weaving Looms
Quantity: 56 , Year: 2013 , Working width 1.90m, Max 4 colors, Staubli S3020 dobby, 16 of 20 shafts installed, 10 heald frames, 4 weft feeders, 1 warp beam (1000mm), Batcher with inspection table, Droppers and wires as on it
AB60/300626E/TT-L/F/AO/
PICANOL Terry Air Jet TER-800-8-R-260
Quantity: 4, Year: 2007, Working width 2600mm, 8 colours, upper beam construction, electronic STAUBLI dobby type 2881, 14 levers stalled, equipment : SUMO, ground – and pile ELO, ETU, 8 weft colours, 6 weft feeders Picanol 1131X2 / 2231X2 with PFL and balloon breaker, feeder stand, 2 bobbin creels, 2 tension rolls Ø 120mm, take-up roll with pins, 14 heald frames…
AA02/290626/BY/
New & Never Installed SMIT Rapier Dobby Looms
Quantity: 17, Year: 2025, Type M2 FAST.340.C8, Working width 3400 mm.
Pre-disposed for either Dobby or Jacquard, of your choice, without dobby or jacquard.
8 colors weft selection, Free Flight Rapiers, Speed 470 rpm, Converging Rapiers for precise weft positioning, Programmable elec. weft-cutter, Type E-cut, Control of the weft stretching at high speed, pick by pick independently, Electronic Scissors for lateral & intermediate cutting units, On Loom Take up, Full Beam Execution, One 6 row electronic warp stop motion.
AB28/300626E/YT-R/AY/
DORNIER Airjet Jacquard Looms
Quantity: 4, Year: 2013, Type AWS 6/J G, width 190 cm, 6 colours.
STÄUBLI jacquard type SX, 2688 hooks, JC7 controller, STÄUBLI harness type GA2000. SYNCRO DRIVE (no shaft between loom and jacquard)
each supplied with: 6 ROJ weft feeders type Super Elf X3, 1.5 warp beams diameter 800 mm, 1.5 cloth rollers, droppers as fitted.
MACHINES ARE ON FACTORY FLOOR.
AB46/270626/
Nuovo Pignone Weaving Machines
Quantity: 7
AB46/270626D/S.L-R/F/
1x Nuovo Pignone FASTR200 dobby Weaving Machine, Year: 1995, Jacquard, Size - 200 cm.
AB46/270626D/S.S-R/F/
1x Nuovo Pignone FASTR200 Top Beam dobby Weaving Machine, Year: 1995, Jacquard, Size - 200 cm.
AB46/270626D/S.L-R/F/
1x Nuovo Pignone FASTR200 Top Beam dobby Weaving Machine, Year: 1995, Size - 200 cm.
AB46/270626D/S.S-R/F/
1x Nuovo Pignone FASTR200 Dobby Weaving Machine, Year: 1995, Jacquard, Size - 200 cm.
AB46/270626D/AA.L-R/F/
1x Nuovo Pignone/Bonas FASTR200 Jacquard Weaving Machine, Year: 1995, Size - 200 cm, w/ Bonas ASJ4 Jacquard Head, Number of Ends - 2688 .
AB46/270626D/AA.L-R/F/
1x Nuovo Pignone/Bonas FASTR200 Jacquard Weaving Machine, Year: 1995, Size - 200 cm, w/ Bonas ASJ4 Jacquard Head, Number of Heads - 2688.
AB46/270626D/AA.L-R/F/
1x Nuovo Pignone/Bonas FASTR200 Jacquard Weaving Machine, Year: 1995, Size - 200 cm, w/ Bonas ASJ4 Jacquard Head, Number of Heads - 2688.
AB46/270626/
Somet Weaving Machines
Quantity: 10
AB46/270626D/AI.L-R/F/
1x Somet Thema 11 Excel / H1900 Dobby Weaving Machine, Year: 1996, Size - 1900 cm, Socos PLC Control.
AB46/270626D/AI.L-R/F/
1x Somet Thema 11 Excel / H2100 Dobby Weaving Machine, Year: 1996, Size - 2100 cm, Socos PLC Control.
AB46/270626D/AI.L-R/F/
1x Somet Thema 11 Excel / H2100 Dobby Weaving Machine, Year: 1996, Size - 2100 cm, Socos PLC Control.
AB46/270626D/AI.L-R/F/
1x Somet Thema 11 Excel / H2100 Dobby Weaving Machine, Year: 1996, Size - 2100 cm, Socos PLC Control.
AB46/270626D/AI.L-R/F/
1x Somet Thema 11 Excel / H1900 Dobby Weaving Machine, Year: 1996, Size - 1900 cm, Socos PLC Control.
AB46/270626D/AI.L-R/F/
1x Somet Thema 11 Excel / H2100 Dobby Weaving Machine, Year: 1996, Size - 2100 cm, Socos PLC Control.
AB46/270626D/AI.L-R/F/
1x Somet Thema 11 Excel / H2100 Dobby Weaving Machine, Year: 1994, Size - 2100 cm, Socos PLC Control.
AB46/270626D/AI.L-R/F/
1x Somet Thema 11 Excel / H2100 Dobby Weaving Machine, Year: 1996, Size - 2100 cm, Socos PLC Control.
AB46/270626D/AI.L-R/F/
1x Somet Thema 11 Excel / H2100 Dobby Weaving Machine, Year: 1996, Size - 2100 cm, Socos PLC Control.
AB46/270626D/AA.L-R/F/
1x Somet Thema 11 Excel / H1900 Double Beam Dobby Weaving Machine, Year: 1996, Size - 1900 cm, Socos PLC Control.
AB46/270626/
Somet/Bonas Jacquard Weaving Machines
Quantity: 10
AB46/270626D/AA.L-R/F/
1x Somet/Bonas Thema 11E / H1900 Jacquard Weaving Machine, Year: 1994, Size - 1900 cm, Socos PLC Control, w/ Bonas ASJ Jacquard Head, Number of Ends - 2688.
AB46/270626D/AA.L-R/F/
1x Somet/Bonas Thema 11E / H1900 Double Beam Jacquard Weaving Machine, Year: 1994, Size - 1900 cm, Socos PLC Control, w/ Bonas ASJ Jacquard Head, Number of Ends - 2688.
AB46/270626D/AA.L-R/F/
1x Somet/Bonas Thema 11E / H1900 Jacquard Weaving Machine, Year: 1993, Size - 1900 cm, Socos PLC Control,w/ Bonas ASJ4 Jacquard Head, Number of Heads - 2688.
AB46/270626D/AA.L-R/F/
1x Somet/Bonas Thema 11E / H1900 Jacquard Weaving Machine, Year: 1994, Size - 1900 cm, Socos PLC Control,w/ Bonas ASJ4 Jacquard Head, Number of Heads - 2688.
AB46/270626D/AC.L-R/F/
1x Somet/Bonas Thema 11 Excel / H1900 Jacquard Weaving Machine, Year: 1996, Size - 1900 cm, Socos PLC Control, w/ Bonas ASJ4 Jacquard Head, Number of Ends - 2688.
AB46/270626D/AC.L-R/F/
1x Somet/Bonas Thema 11 Excel / H1900 Jacquard Weaving Machine, Year: 1996, Size - 1900 cm, Socos PLC Control, w/ Bonas ASJ4 Jacquard Head, Number of Ends - 2688.
AB46/270626D/AC.L-R/F/
1x Somet/Bonas Thema 11 Excel / H1900 Jacquard Weaving Machine, Year: 1996, Size - 1900 cm, Socos PLC Control, w/ Bonas ASJ4 Jacquard Head, Number of Ends - 2688.
AB46/270626D/AY.L-R/F/
1x Somet/Bonas Thema Super Excel / H1900 Jacquard Weaving Machine, Year: 1997, Size - 1900 cm, Socos PLC Control, w/ Bonas CSJ / 54368 Jacquard Head, Number of Ends - 2688.
AB46/270626D/AY.L-R/F/
1x Somet/Bonas Thema Super Excel / H1900 Jacquard Weaving Machine, Year: 1997, Size - 1900 cm, Socos PLC Control, w/ Bonas CSJ Mini Head, 57".
AB46/270626D/AY.L-R/F/
1x Somet/Bonas Thema Super Excel / H1900 Jacquard Weaving Machine, Year: 1997, Size - 1900 cm, Socos PLC Control, w/ Bonas CSJ / 54368 Jacquard Head, Number of Ends - 2688.
AG61/240626/
Somet Alpha PGA Weaving Looms
Quantity: 6
2x Alpha PGA double beam assembly, Year: 2006, 190cm wide, jacquard weaving machine, jacquards with 2688 Cengel JC5 screen.
2x Somet Alpha, Year: 2005, 190cm wide, jacquard weaving machine, jacquards with 2688 Cengel JC5 screen.
2x Somet Alpha, Year: 2004 , 190cm wide, jacquard weaving machine, jacquards with 2688 Cengel JC5 screen.
For each machine: 8 colors, 4 weft motors, 1.5 beams, 1.5 cloth rollers.
AE56/240626/
Toyota T810 Air Jet Loom
Quantity: 1, Year: 2018, Width 340cm, 1681 positive cam, 2 feeder, 6 frame, 2 warp beam, 1 beam 1 roller, Can test running.
AA10/240626/
Sulzer G6300 Looms
Quantity: 3, Year: 1×2004-2×2001, Width 2200 mm, 8 colours, Staubli dobby type 2670, 20 shafts, Free-Fly.
AA10/240626/
Somet Looms
Quantity: 5
2x mod. SUPER EXCEL, Year: 2000, width 2100 mm, 8 colours, Staubli dobby type 2660, 20 shafts, electronic Warp let-off and Take-up.
3x mod. THEMA 11 EXCEL, Year: 2×1995-1×1997, width 2100 mm, 8 colours, Staubli dobby type 2660, 20 shafts, electronic Warp let-off and Take-up.
AD25/230626/
NUOVO PIGNONE SMIT GS920 Looms
Quantity: 2, Year: 2007-2008, MOD. GS920 , WORKING WIDTH 2200 MMS
TWIN DRIVE, COMPLETE WITH STAUBLI, DOBBY MOD. 2670 (20 SHAFTS), 8 COLOURS.
Accessories per loom: 10 HEALD FRAMES, 4 WEFT ACCUMUL, 1 WARP BEAM , 2 TAKE UP ROLLERS.
AE02/260626/
Picanol looms Gamma-4-R-190
Quantity: 2, Year: 2001, ww. 1900 mm, Stäubli dobby, Sumo motor
AB51/040626/
Sulzer G6300 Looms
Quantity: 5, Year: 2001/2003, Working widht 2200 mm, 8 colors, Electronic STAUBLI dobby model 2668 (20 shafts fitted), WITH INVERTER.
each machine complete with following accessories : 01 warp beam with flanges diam.800 mm, 04 weft accumulator heads with stand and creel, 01 take up roller, 5.000 heald wires and drop wires, 12 heald frames.
AA10/240626E/ACC-O/F/
Dornier ATFS/8J Air Jet Looms
Quantity: 2, Year: 2008, Type ATFS/8J, 260 cm,DP2, Terry motion , with Bonas jacquard, 1 LJ with 5376 hooks – 1 ZJ with 2668 hooks.
Both machines with: 8 prewinders, 8 warp beams, Lot of spare parts including clutches, With frame for jacquard machine, The machines are in working conditions.
AA23/230626/AZ/
Picanol SUMMUM Looms
Quantity: 14
AA23/230626E/CS.L-A.L/M/AZ/
10x PICANOL SUMMUM LOOMS WITH DOBBY, W.WIDTH 190, Year: 2016-2018:
Each equipped with:
Staubli dobby levers 12 installed capacity 16
4 weft feeders
1.5 warp beam 1000 mm dia
1.5 cloth roller
8 heald frames
Heald wires and droppers as on looms ( ca 6500 each)
Looms like new, rarely used, Mill floor, working seldom.
AA23/230626E/CY.L-A.L/M/AZ/
4x PICANOL SUMMUM LOOMS WITH CAM, W.WIDTH 190, Year: 2015:
Each equipped with:
Cam levers 8 installed capacity 8
4 weft feeders
1.5 warp beam 1000 mm dia
1.5 cloth roller
4 heald frames
Heald wires and droppers as on looms ( ca 6500 each)
Looms like new, rarely used, Mill floor, working seldom.
AF61/210626/
Picanol Terry Towel Summum 8-J Looms
Quantity: 2, Year: 2016, 360 cm.
1-Staubli SX 2688 hooks, 1-Staubli LX 3072 hooks
JC7 controllers, 02 Upper Beams 1100 mm, 02 Lower Beams 1000 mm, 06 Weft Feeders, With Batching, Droppers as on each loom.
AF61/210626/
Picanol Terry Plus-i ABBO111 6-R Looms
Quantity: 4, Year: 2021, 360 cm , With Staubli Dobby 3260 20/16 installing.
Accessories: 14 Heald Frames, 02 Upper Beams 1100 mm, 02 Lower Beams 1000 mm, 06 Weft Feeders, With Batching, Droppers and Heald Heald Wires as on each loom.
AF61/210626/
Picanol Terry Towel Summum 8-J Looms
Quantity: 10, Year: 2016, 260 cm.
3-Staubli SX 2688 hooks, 4-Staubli LX 3072 hooks, 3-Staubli LX 6144 hooks, JC7 controllers.
ACCESSORIES WITH EACH LOOM: 02 Upper Beams 1100 mm, 02 Lower Beams 1000 mm, 06 Weft Feeders, With Batching, Droppers and Heald wires as on each loom.
AB55/220626D/AC.L-R/F/BV
Rapier Sulzer Looms SULTEX G6500, HIGH QUALITY and in Production
Quantity: 9, 16 shafts, Speed 450 picks/min, 1900mm nominal width, Dobbies fimatextile, Big roll batcher included diameter 1000mm, Warp beams 1000mm, Weft feeders 4 per loom LGL
DETTAILS:Power Supply 400Volts / 50 Hz, Control & monitoring of parameters through a central, microprocessor
Let off & Take up with servo motor, Lef off gearing for weft density of range 6—100 picks/cm, Direct drive with inverter (allow speed adjustment )
Electronically controlled dobby (Fimtextile type SP7), Positive whip roller, Back rest roller with load cell
Automatic pick finding, Frame drive for 16 heald frames, DRC4 heald frame connection, Frame provision for heald of 13 inch
Warp beam flange diameter of 1000 mm, Prewinder with switch-over function at weft break ( LGL, Model Vector) 4 colours, Warp stop motion Type Actex A625C ( 6 rails), perfectly running
AB51/050626/AQ/
Itema A9500 Airjet Looms
Quantity: 6, Year: 2016, working widht 2100 mm, 4 colors, Electronic STAUBLI dobby (12 shafts fitted)
Each machine equipped with: 8x heald frames, 4x weft accumulators, 1x warp beam with flanges diam. 1000, 1x cloth roller, heald wires and drop wires as fitted.
Machines are in very good conditions and can be inspected any time in warehouse.
AB60/170626/
Picanol Air Jet Weaving Looms OMNIplus800-4-J-190
Quantity: 10, Year:2006, Working width 1900mm, 4 colours installed, equipped for jacquard but without jacquard.
Equipment: SUMO, ELO, ETU, PRA, 4 weft colours, 4 weft feeders Picanol type 1131CANPlus with PFL and balloon breaker, feeder stand, bobbin creel, double warp tension rolls Ø 120mm with easing motion RHS&LHS, warp detection GROB with 6 detection bars, 4000 droppers, double pressure roll, AIR-TUCKERS RHS+LHS, 1,5 warp beam Ø 1000mm, touchscreen, 2 steps, PRA dustbin, internal cloth roller system, 1,5 cloth roller, maximum speed 900RPM
Note : 2 looms year 2006 with ELDEC and both foreseen with upper beam construction (not complete) ; all looms were fitted with new SUMO engine during the maintenance programme (renewed period 2015 – 2022).
AA23/170626/
Picanol OMNIPLUS SUMMUM-F-4-J Loom
Quantity: 8, Year: 2017, LIKE NEW – LOW HOURS, WW 220, With SX Jacquards.
AB60/170626/
Picanol Air Jet Weaving Loom OMNIplus800-4-J-190
Quantity: 1, Year: 2009, Type OMNIplus800-4-J-190
working width 1900mm, 4 colours installed, with jacquard STAUBLI type SX2688 year of construction 2010 format 2688 hooks (installed complete; M6 modules) . Equipment : SUMO, ELO, ETU, PRA, AIRMASTER, 4 weft colours, 4 weft feeders Picanol type 1131X2 with PFL and balloon breaker, feeder stand, bobbin creel, double warp tension rolls Ø 120mm with easing motion RHS&LHS, warp detection GROB with 6 detection bars, 5000 droppers, double pressure roll, air-tuckers RHS+LHS, warp beam Ø 1000mm, touchscreen, 2 steps, waste-system with dustbin, internal cloth roller, cloth roll, cardan axe, Controller Staubli JC6, maximum speed 900TPM, ELDEC, without harness.
AA23/170626/AZ/
Dornier Looms
Quantity: 13
1x Dornier LWV 4/E, pneumatic, 320 cm , Year: 1998
8x Dornier LWV 4/J, pneumatic jacquards, 190-210 cm, Year: 1999
2x Dornier AWV 4/S, pneumatic dobby, 360 cm, Year: 2001
1x Dornier HTVS 4/J, rapier jacquards, 210 cm , Year: 1999
1x Dornier LWV 4/S, pneumatic, 210 cm, Year: 1999
AJ15/050626E/CA.L-A.L/F/
Picanol Optimax 8-R Looms
Quantity: 2, Year: 2012, Width 190 cm, 8 COLORS SELECTOR, FREE FLIGHT, EQUIPPED WITH STAUBLI DOBBY S3060, 20 LEVERS INSTALLED.
ACCESSORIES FOR EACH LOOM: 04 WEFT FEEDERS, 01 BEAM (length 165 cm), 1.5 CLOTH ROLLERS, 10 FRAMES, HEDDLESS ON THE LOOM, NO DROPPER ON THE LOOM.
AA02/150626/
Terry Towel Machinery & Equipment AS NEW-2019
1 shift 5 day/w
WARPING:
1x KARL MAYER DIRECT WARPER
Model Warp Direct 2400/1250, Year of Manufacture 2018, 2400mm Warping Width, 1250mm Maximum Flange Diameter, Zig Zag Reed, Perspex fly screen.
With:
1x KARL MAYER VEE CREEL
Model Creel, Year of Manufacture 2018, 650 Running ends, Automatic Cutter, With Mayer GV Tensionners, Inside loading, Outside Discharge, 5 Packages high, Packages at 17inch vertical and 10 inch horizontal off set centers.
36x SECTION BEAMS 2400MM X 1000MM DIAMETER
With cone splined drive ends.
1x TANGSHI CONE TO CONE RE-WINDER
Year of Manufacture 2018, 60 positions Double sided 30 positions each side, 6 position per section x 5 sections, 6 inch traverse with grooved drums, 4 deg 20- cone angle, Individual motor drive to each spindle, 3 position Tension discs, End Breakage, Overhead travelling blower.
BEAM HANDLING:
2x WUXI XJANDA BEAM STORAGE RACKS
Year of Manufacture 2018, 2 tier – Motorized beam retrieval, 25 Beams each rack, Beam Hangers – Max weight 1500KG, Max beam length 300cm, Max flange diameter 1250mm, Overall height 24 feet.
3x WUXI XJANDA BEAM PALLET TRUCKS
Model XD-1200T, Year of Manufacture 2018, Hydraulic, Beam forks 280cm Max 1200mm beam diameter.
4x WUXI XJANDA BEAM PALLET TRUCKS
Model XD-1250T, Year of Manufacture 2018, Hydraulic, Beam forks 280cm Max 1250mm beam diameter.
5x WUXI XJANDA BEAM PALLET TRUCKS
Model XYJC-1500, Year of Manufacture 2018, Hydraulic, Beam forks 280cm Max 1250mm beam diameter.
2x WUXI XJANDA BEAM PALLET TRUCKS
Model XD-2500 ET, Year of Manufacture 2018, Hydraulic, Beam forks 280cm Max 2500mm beam diameter.
1x WUXI XJANDA BEAM PALLET TRUCK w/CHARGER
Model XD-1000 B, Year of Manufacture 2018, Manual.
WEAVING:
12x TOYOTA AIR JET TERRY LOOMS
Model JAT810, Year of Manufacture 2018, Type JA4T-280DE-EH-T810, 280cm weaving width, 4 color, Staubli dobby Model S3222 e3 DRC, 20 Shaft Capacity, 16 levers installed, Neuenhauser off loom take up with inspection, Leno selvedges, 2 row Ground and 2 row pile warp stop motion, Each loom installed with, 1 Ground beam 800mm diameter, 1 Pile Beam 1250mm diameter, 16 Harness frames, 4 weft feeders, 1 Weft creel stand, 2 Row Pile Warp stop motion, 2 Row Ground warp stop motion, 1 Neuenhauser Batcher.
1x GROZ-BECKEART WARP TYING HEAD
Model Knot Master, Year of Manufacture 2018, Type AS/3, Sheet to sheet, With spare knotting cartridge in transport trolley.
1x WARP TYING FRAME
Year of Manufacture 2018, 3000mm brush length.
DYEING:
1x THIES I-MASTER JET DYE MACHINE
Model i-Master F. Type 140/4, Year of Manufacture 2019, 4 Port – 1600 kg Capacity, 200mm diameter nozzle for Terry, With expansion tank, With 2 Dye preparation Tanks, With Heat exchanger, Winch and operator stand, Setex controller.
1x THIES I-MASTER JET DYE MACHINE
Model i-Master F. Type 140/1, Year of Manufacture 2018, 1 Port – 400 kg Capacity, 200mm diameter nozzle for Terry, With expansion tank, With 2 Dye preparation Tanks, With Heat exchanger, Winch and operator stand, Setex controller.
1x THIES CHEMICAL DISPENSING SYSTEM
Year of Manufacture 2018, With 20 Tanks.
1x THIES DYE DISSOLVER
Type MPS-D600L, Year of Manufacture 2018, With Hot water tank, Control scales.
FINISHING:
1x UNITECH TENTER FRAME
Model RED.EV07/6K/28u/G, Year of Manufacture 2018, Maximum width 3000mm, 6 Zone, Nat Gas Heated, 1 Exhaust Fan, Unitech Unwind stand, Pin Chain with Horizontal Return, Bianco Pad Model Foulard Spremitura, PW 3000 x FW 2800, With (2) chemical application tanks, Bianco Opener and weft straightener, Model Raddrizzatrama A Spilli, With Spirals RDSBP00049LO535.
STITCHING:
1x TEXPA LENGTH CUTTER/SLITTER
Type 109, Year of Manufacture 2018, Volts: 277/480, 60Hz.
2x TEXPA LENGTH HEMMERS
Type Terry Length 120, Year of Manufacture 2018, With (2) Pegasus Double lock stitch hemmers.
1x TEXPA FOLDING MACHINE
Model APD3/2 Folder, Year of Manufacture 2018, 56 inch table entry, 27 inch conveyor exit, into:
1x DM PACK PACKING MACHINE
Model Star EVO 1100/T, Year of Manufacture 2019, Electric heat bag sealer, With Label Printer, 480V, 50/60Hz.
LABORATORY:
Year of Manufacture 2018
1x DARONG EIGHT BASKET THERMOSTAT DRIER, Type Y (B) 802G.
1x DARONG ELECTRONIC SINGLE END STRENGTH TESTER, Type YG (B) 021DL.
1x G&G ELECTRONIC SCALE, Type TC30K-H.
1x DARONG YARN TESTER, Type YG (B) 086.
1x DARONG TESTER, Type YB 331C
1x DARONG LAB OVEN, Color Fastness to Perspiration, Type Y (B) 902 G
1x BALANCE SCALE, Type FA1004, 100 Gram
1x DARONG TESTER RUBBING, Type YB571-III
1x GRETAG MACBETH LIGHT BOOTH, Type Spectralight III
1x DARONG WATER ABSORBTION TESTER
1x DARONG DIGITAL TEARING TESTER, Type YG (B) 033B
1x DARONG DIGITAL FABRIC STRENGTH TESTER, Type YG (B) 26SJ
1x DIGITAL ELECTRONIC BALANCE, Model FA B Series
1x G&G DIGITAL SCALE
1x DIGITAL TWIST TESTER, Model YB 331C, Year 2018
1x WET & DRY CROCK TESTER RUBBING, Model Y (B) 571-11
1x ROTARY CROCK TESTER, Model Y (B) 571-X
1x ABSORBANCY TESTER, Model Y (B) 813X, Year 2018
1x WENZHOU LAUNDROMETER, Year 2018
1x JINGKE HIGH TEMP SAMPLE DYEING MACHINE, Year 2018
1x BLUE M LAB OVEN
1x JINGHE DYE CONTROLLER, Type HG-TC100
PLANT & EQUIPMENT:
2x JOHNSON STEAM BOILER SYSTEM
Model PFTA750-4G150S, Year of Manufacture 2018, 750 HP, 150 Psi.
with:
1x GM SURGE TANK
Model UW, Year of Manufacture 2018
AA98/150626/AG/
Dornier RWV Jacquard Looms
Dornier RWV
Quantity: 4, Year: 2008, ww. 190 cm, with Jacquard Staubli DX 110,2.688 hooks , JC6 ,Each loom provided with:6 accumulators , 1,5 beams , 1,5 cloth rollers , droppers .
Dornier RWV
Quantity: 2, Year: 2009, ww. 190 cm. ,equipped of double Beams , with Jacquard Staubli DX 110,2.688 hooks , JC6 ,Each loom provided with:6 accumulators , 1,5 beams , 1,5 cloth rollers , droppers .Looms are still running in excellent condition .
AC83/150626E/YO-Y/F/CF/
Dornier Jaquard looms RWV 8/J
Quantity: 2, Year: 2010, nominal width 190 cm, 8 colours in the weft, 8 weft feeders each loom
with 2 x jacquards Stäubli, type DX 110, year 2010, 2644 hooks, modulles M6,, 2 x Harness, 10560 ropes for desgn, 4 repeats, 32 ropes for edges, 2 ropes for leno
1 x gantry for both looms, 1,5 warp beams each loom
AB46/311225/
Itema R9500 Rapier Looms
Quantity: 56, Year: 10×2013, 1×2014, 29×2014 (Upper Beam), 4×2015, 12×2016
Model-R9500, Width: 190 cm, Type: Rapier Loom
AB08/110626E/AS-A.L/C/BJ/
Dornier Airjet Looms AWS4/E
Quantity: 6, Year: 2008, Nominal width 360 cm, 4 weft colours, Vmax. 700 ppm , Stäubli 1761 cam motion – 10 levers installed, EWL – 2 electronic warp let-off motions (rhs + lhs), split beam execution, max. flange diam. 1.016 mm, ECT – electronic take-up, off loom take-up, pneum. side tuck-in units, with frequency inverter.
Accessories per loom:
batching motion with inspection stand: 1
weft accumulators: 2
weft creel
Grob heald Frames: 6
6 cams (2 x 2/2 and 4 x 1/1)
heddles and droppers: 7000 (approx. each)
Machines in production
AF61/100626E/TY-Y/F/AQ/
SULZER PROJECTILE P7150 H 540 CM P540 N1 EP D12
Quantity: 2, Year: 2003, Cam motion 4 levers (capacity 10 pos), Let off electronic, take up electronic, weft insertion brake, Steel projectile, Sidac controller
n°1 twin warp beam flange Ø1000 Q3/Q4, n°1 weftfeeder Chronox2 with stand, n°4 healdframes Leno heddles, n°1 warp stop motion 6 contact bars, heddles as installed / approx 1000 pcs.
NOTE: Machines in Production as at June 2026.
AB76/090626/AA/
PICANOL GTX-4-R
Quantity: 6, Year: 1995-1998, ww 190, 2 feeders Picanol Laser, 4 colours,, Staubli dobby mod 2660, 10 frames, flanges 800, 4000 droppers and heddles., Status: looms in excellent, working condition
AG52/080626D/P.R-A.L/F/CD/
Sulzer L5400 Looms
Quantity: 61
Year: 2003
Dobby and CAM = excentricas
Width: 210CM
Sulzer/Toyota L5400 Dobby 2871
Quantity: 19, Year: 2003, WW 2,10mt, 02 feeders, 02 colors, 1,5 warp beam, 1,5 roller, warp beam diameter 1000mm, 16 frames, 16 levers, 16 levers capacity, Electronical Leno individual
Sulzer/Toyota L5400 Cams 1761
Quantity: 42, Year: 2003, WW 2,10mt, 02 feeders, 02 colors, 1,5 warp beam, 1,5 roller, warp beam diameter 1000mm, 6 frames, 6 levers installed, 6 levers capacity, Electronical Leno Group
No kit lycra, No tuckin, No batcher.
4 Looms fit in 1 Ctr.
AD26/060626E/RP.L-C/F/
Dornier PTS8/S
Quantity: 4, Year: 2008, width 220 cm, Panel 2, Staubli dobby 2670 – 20 levers with PSL (pneumatic shaft loock)
EWL + ECT, 4 colours with ECS (predisposed for 8), Accessories per loom: 6 heald frames, 1 beam diam. 800 mm, 1 cloth roller and 4 weft feeders., Jacquardette CX 172 (for leno name) not included
AE02/120526E/CO.L-C/F/AN/
Picanol Gammax-8-J-3400 Looms
Quantity: 14, Year: 2005, ww. 3400 mm, Stäubli jacquard LX 1600B, 2688 hooks, free flight.
14 Jacquard LX 1600, JC5 controller, 2688 hooks capacity, FF (free flight) rapier execution, Elsy electronic leno device, 8 colours, 8 pre-feeder Chrono X2, electronic filling insertion, 2 warp beams (dia. 1000 mm), 13.000/26.000 heddles/droppers, Grob 6 bar stop motion, Sick optical safety control, harness cut (unhooked is plus 300 Euro) – gantry optional (against payment – plus 1500 Euro)
AB51/040626/
Nuovo Pignone Looms
Quantity: 2, Year: 1998, Model FAST “T”, working widht 2200 mm, 8 colors. Electronic STAUBLI dobby model 2660 (20 shafts fitted )
each machine complete with following accessories : 01 warp beam with flanges diam.800 mm, 04 weft accumulator heads with stand and creel, 01 take up roller, 5.000 heald wires and drop wires, 12 heald frames.
AF74/010626/
Picanol Omni Plus Summum 4-R Air Jet looms
Quantity: 9, Year: 2017, Working width 2.20m, Max 4 colors, Staubli S1692 cam box with max 8 levers
Accessories per loom:
8 levers fully installed, 6 heald frames, 4 weft feeders , 6 stop bars, Appr. 8000 droppers, Appr. 8000 wires, 1.5 warp beam flange diam. 1000mm, 1.5 cloth roller
AD26/310526/
Picanol Optimax T220
Quantity: 12, Year: 2014, 8 colors / 4 prewinders, Staubli 3020 dobby, Capacity for 20 but 16 suspension elements installed, 14 HF / mch, FF VB, MC, 10.000 heddles / droppers / mch, 1.5 WB and CL / mch, Class 2 WB 805mm dia.
AC83/300426E/CI-A.L/C/BY/
Picanol Omniplus Summum Air Jet Looms
Quantity: 12, Year: 2013-2014, Working width 220cm, Air nozzle weft insertion type, STAUBLI Cam 1781A (Cam capacity 10 shafts)
9 shafts + 9 levers + 6 heald frames (9/9/6 installed), 9 shaft (harness+ lever) installed, 4 colours
Each loom equipped with: 4 weft feeders, 1.5 warp beams per machine dia 1000, 6 frames, 6000 heddles and droppers, 1 reed, without batcher
Machines stopped. Always using original spare parts.
AB46/300526/
Tsudakoma Air Jet Zax Looms
Quantity: 17, Year: 1994, Model : Zax, Working Width : 380cm, Color: 2col, Feeders : 2, Frames : 6, Staubli Cam : 1600, Off loom Take up, Warp Stop Motion : 6 Bar.
AH42/290526/
ITEMA ALPHA PGA Loom
Quantity: 1, Year: 2006, W:3200
STAUBLI DOUBLE JACQUARD DX100/2688 CTR.JC6 Year 2007xJACQUARD, 8 COLORS, ELECTRONIC LET-OFF,ELECTRONIC TAKE-UP, CENTRAL CUTTER, 1 SINGLE BEAM D.800, 1 CLOTH ROLLER, 4 LGL PREFEEDERS VECTOR, COMPLETE HARNESSES, DROPPERS AS ON THE LOOM.
STATUS: WORKING
AH42/290526/
VAMATEX LEONARDO Looms
Quantity: 2, Year: 2003, W:3600
BONAS ELECTRONIC DOUBLE JACQUARD IBJ2/2688 CTR.S500, 8 COLORS, ELECTRONIC LET-OFF-ELECTRONIC TAKE-UP, INVERTER, EACH LOOM WITH 1 BEAM D.800, 1 CLOTH ROLLER, 4 ROJ PREFEEDERS CHRONO HS, 14600(1)-10600(1) HARNESSES, 14600(1)-10600 DROPPERS(1)
STATUS: WORKING