AF16/170126/AS
Picanol Optimax-I Looms
Quantity: 24, Year: 2020, 220 cm, With staubli dobby S3020, 20 shaft-16 installed, Guide hook.
AF16/150126E/RA-C/F/AS/
Itema R9500 Rapier Looms
Quantity: 6, Year: 2017, Width: 220cm, Type GC, Rapier GC Hooks, 20 Shafts Fully Installed, Staubli dobby s3020, 12 pcs frames, 4 pcs accumulators, 1,5 warp beam, 1,5 cloth roller, 5000 dropper and heedles.
AB60/130126/
Picanol Rapier Looms
Quantity: 2, Year: 2007, Type OptiMax-8-R-250 , Working width 2500mm, 8 colours, electronic STAUBLI dobby type 2861 with 20 shafts capacity, 14 levers installed, free flight, Sumo motor, Ldec, each equipped with : 3/4 weft accumulators iro Luna X2, 14 heald frames; 1.5 beams; batching motion NUOVO FORMIA.
AC44/051225/
Vamatex P1001 ES Looms
Quantity: 6, Year: 1994, 2300mm, 8 colours, With FIMTEXTILE dobby, 16 levers, Including 2 weft accumulators, 12 heald frames, 1,5 warp beams, 1,5 cloth rolls.
AB51/070126/AQ/
Dornier Rapier looms PTS 8/S C (P1)
Quantity: 5, Year: 2015 , working width 220 cms – Staubli Dobby S3020 for 20 levers
Accessories for each looms:, 14 Frames Groz Beckert, 06 weft accumulators, 06 ECS, 02 warp beams diam 800 mm, 02 cloth rollers, 5.000 heddles and droppers.
AG61/070126E/CR-A/M/BG/
Picanol Optimax 4R Looms
Quantity: 20, Year: 2013-2014, 2200 mm weaving width / FREE FLIGHT weft insertion type, STAUBLI Dobby S3060 (dobby capacity 20 shafts).
8 sets with 14 shafts + 14 levers + 8 heald frames (14/14/8 installed)
12 sets with 12 shafts +12 levers + 8 heald frames (12/12/8 installed)
4 weft feeders, Machines originally 4 colors (plate) but factory will supply 6 colors installed (fingers).
17 warp beams (1100 mm flange), 13 warp beams (1000 mm flange), Average: 1.5 beams/machine
Per loom: 8 heald frames / 6000 heddles / 6000 droppers, External batching with FORMIA-GAP inspection table, 1 reed per loom.
Note:
Production speed (rpm) always depends on the weft yarns quality, but normally 500-550 picks x minute
Type of prewinders (weft feeders) IRO LUNA X3. 380V 50hz
Machines stopped at the begin of August 2025, but still connected
AB60/060126/
Dornier Tire-Cord Rapier Loom
Quantity: 1, Year: 1999, Type HTVM/E-200
Nominal working width 2000mm, with electronic STAUBLI dobby type 2861/2 year of construction 2004, 16 levers installed. Details : heavy electronic let-off motor for ground- and upper beam and heavy take-up motor controlled by LENZE devices, Dialog panel 2, 2 mechanical weft colours (pick/pick), combined bobbin-feeder support, 2 weft accumulators DORNIER type CHRONO X2-M (CANBUS), GROB warp motion with 3 detection bars, 8 heald frames 13” C, healds as on loom, 1 tension roll diam. 140 mm with spring right and left side, 2 pressure rolls, prepared for tucking-in devices but without tucking-in devices, mechanical waste cutter RHS & LHS, standard temples, left and right grippers, waste split system right and left side, take-up system of the waste selvedge with waste dustbin, cloth roll drive system, 1 cloth roller, ground warp beam diameter 800mm, ground gear with adapters, motorized upper beam construction, without fancy warp beam, without upper guiding roll, without upper warp gear.
Including Tire cord frame, maximum nominal width 200cm. Details : walking floor / pneumatic Festo driving system with heavy Festo pneumatic pistons RHS&LHS with following functions 1. Cylinders downwards / 2. Compensator / 3. Cylinders upwards; working air pressure 6 bar/ fixation profile for reed / warp detection Grob with 5 detection bars / guiding rolls (max. 218cm) / walking floor. Dimensions mounted construction Tire cord frame : 261cm x 258cm x 125cm
AB51/070126/
Sulzer G6300 Looms
Quantity: 1, Year: 2001, Working widht 2000 mm, 8 colors, Electronic STAUBLI dobby model 2668 (20 shafts fitted )
each machine complete with following accessories : 01 warp beam with flanges diam.800 mm, 04 weft accumulator heads IRO GALAXY with stand and creel, 01 take up roller, 5.000 heald wires and drop wires, 14 heald frames.
AB60/060126/
Vamatex Rapier Loom
Quantity: 1, Year: 1996, Type P1001ES T190, Working width 1900mm, 8 colours.
With jacquard GROSSE type EJP-11 12V , year of construction 2004 format 2688 hooks (2432 hooks installed).
Equipment : small grippers on hook guiding system, bobbin stand, 8 weft colours, feeder support, 4 weft feeders ROJ CHRONO X2, warp detection ACTEX with 6 detection bars, 1 ½ warp beam, 1 ½ cloth roller, 9.600 droppers, cardan-axe, controller GROSSE.
AB60/060126/
Vamatex Rapier LEONARDO T170 Loom
Quantity: 1, Year: 2001
working width 1700mm, 8 colours, STAUBLI dobby 2861, 20 levers. Equipped with : grippers on hook guiding system, 8 weft colours installed, 4 weft feeders LGL type Progress, cone creel, weft feeder support, 12 heald frames, warp stop motion ACTEX with 8 detection bars, 1 warp tension roll, 1 warp beam, 4000 healds, 4000 droppers, display, external batching motion FERBER with illuminated inspection table.
AB60/060126E/AT-A/F/AO/
Sulzer Projectile Weaving Looms P7100-B220-N-1-1-EP-R-D1 / P7100-B220-N-4-EP-R-Q-D1
Quantity: 4, Year: 1990-1991, Type P7100-B220-N-1-1-EP-R-D1 (3x) / P7100-B220-N-4-EP-R-Q-D1, Working width 2200mm, 2 colours, cam box SULZER, 10 levers installed.
Each equipped with : combined feeder/bobbin stand, 2 weft feeders Iro Orion (2 looms) / 2 weft feeders Sulzer (2 looms) with command box, 2 weft colours, 2 weft brakes, 6 heald frames SULZER GROBAMEXTRA 13”, warp stop motion with 5 detection bars, warp beam with flanges diameter 800mm, internal cloth roll drive, 1 cloth roller, mechanical selvedge cutters, dustbin.
AB60/060126/
Picanol Air Jet OmniPlus 800-F-4-R-280 Weaving Loom
Quantity: 1, Year: 09/2010, Working width 2800mm, 4 colours, With jacquard STAUBLI type CX880, year of construction 1997, format 1408, 1344 hooks installed. Equipped with : SUMO, ELO, ETU, 4 weft colours, 4 weft feeders PICANOL type 1131CanPlus with PFL and balloon breaker, feeder stand, bobbin creel, double warp tension rolls Ø 140mm with springs RHS + LHS, single pressure roll, E-leno RHS + LHS, STAUBLI harness year of construction 2018, warp beam position 13, warp detection GROB with 6 detection bars, droppers, melt cutters RHS+LHS, touchscreen, walking step, waste-system with suction waste motor, Eldec, cardan axe, controller STAUBLI JC7 (year of construction 2019), 176 modules M6, single gantry , foreseen for warp beam T280 but without warp beam T280, foreseen for external batching motion but without external batching motion, speed 750 TPM.
AB60/060126E/AO-A/F/AO/
Sulzer Projectile Weaving Looms P7100-B280-N-1-1-EP-R-D1 / P7100-B280-N-4-EP-R-Q-D1
Quantity: 3, Year: 1989-1991, Type P7100-B280-N-1-1-EP-R-D1 (2x) / P7100-B280-N-4-EP-R-Q-D1, Working width 2800mm, 2 colours, with cam box SULZER, 10 levers installed.
Equipment : combined feeder/bobbin stand, 2 weft feeders IRO Orion “M” with control box, 2 weft colours, 2 weft brakes, 8 heald frames SULZER GROBAMEXTRA 13”, warp stop motion with 5 detection bars, warp beam with flanges diameter 950mm, internal cloth roll drive, cloth roll, 2 steps, mechanical selvedge cutters, dustbin.
AB60/060126/
Picanol Rapier Looms
Quantity: 1, Year: 2007, Type OptiMax-4-R-300.
Working width 3000mm, 4 colours, free flight gripper system, electronic STAUBLI dobby type 2861 – 16 levers installed (possibility to increase to 20 levers), equipment : SUMO Motor, ELO, ETU, 4 x electronic colour selector, 4 weft accumulators Picanol Chrono X2-O with stand and bobbin creel, 10 heald frames Steel Heddle Hybrid Power 158 DRC30 13″ C type, 5000 healds, 5000 droppers, warp stop motion GROB with 6 detection bars, double warp tension roll Ø 140mm with spring RHS & LHS, DIN warp beam T300 Ø 1000mm flanges Q4, touchscreen, mechanical weft cutter, 2 motorized waste cutter, 2 x ELSY, double pressure roll, waste dustbin, 2 steps, ELDEC, foreseen for external batching motion but without external batching motion, speed 490 RPM.
AC13/050126/
Dornier HTV Weaving Machines
Quantity: 9 , Working width: approx. 1.80 m – 4.00 m, Condition: Running well, Equipment: Fully equipped / complete, Spare parts: Partial spare parts available
Additional equipment:1 Staubli card punching machine, Fully overhauled – ready to use
Services (optional):Installation after purchase, On-site commissioning and start-up support
AB60/060126E/TA-T/F/AO/
Picanol OptiMax-4-R-540 Rapier Loom
Quantity: 1, Year: 2012, Working width: 5400 mm, 4 colours, electronic dobby STAUBLI type 2622B 12 levers installed, Controlled positive rapier GPG.
Equipped with : SUMO, ELO RHS+LHS (prepared for split beam, but without gear LHS and without mid support), ETU, 4 QS colours, creel with bobbin switch sensor for 4 bobbins, feeder support, 4 feeders IRO Type XD X3 with PFL, 10 heald frames XLF xtra Light 152 DRC30 13”, GROB detection with 6 warp stop motion bars, single warp beam Q4 Ø 800mm (warp tube diameter 270mm), Direct Warp Control type backrest, warp beam position 14, 1 heavy & 1 standard pressure roll, ELSY L & R, touchscreen ID3-3, 3 steps, waste system RHS&LHS with 2 aspiration motors, external batching motion NEUENHAUSER Type DW 3133 LXT (WOB 5500).
AB60/060126/
Vamatex Rapier Loom
Quantity: 1, Year: 1996, Type P1001ES T190
working width 1900mm, 8 colours, foreseen for Jacquard but without jacquard Equipment : small grippers on hook guiding system, 2 x bobbin stand, 8 weft colours, feeder support, 8 weft feeders IRO Galaxy RS, warp stop motion ACTEX with 6 detection bars, 1 ½ warp beam diameter 800mm, 1 ½ cloth roller, droppers as on loom.
AB60/060126/
Dornier Rapier Loom HTVS8/J-190
Quantity: 1, Year: 1997, Type HTVS8/J-190
nominal working width 1900mm, equipped for jacquard but without jacquard. Details : 8 weft colors, 8 weft feeders LGL Smart Vector FA with control box 8 colors, feeder support, bobbin creel, electronic let-off and take-up motor, GROB warp detection with 6 detection bars, warp beam, display panel AT1, take-up system of the waste selvedge, waste dustbin, internal cloth drive system, cloth roll, 380V, 50Hz.
AB60/060126/
Somet (Itema) Rapier Looms
Quantity: 6 , Year: 2005, Type ALPHA PGA HD
working width 3400mm, 8 colours, jacquard STAUBLI type LX3202/6144/0.5 year of construction 2006 format 6144 hooks, number of hooks 4800+selvedge, controller JC6, each : 8 weft feeders LGL type progress with 2 bobbin creels, harness STAUBLI number of cords 19200+96 selvedges, 2 warp beams diameter 1000mm, upper beam system, 1 cloth roller, 8 warp stop motion bars, batching motion.
AC32/301225/
Smit Rapier Weaving Looms with Ukil Sectional Warping & Beaming
2x Ukil Sectional Warping
1) Type-1 : 305S ( 2007 year )
2) Type-2 : 305 ( 1997 year )
Width : 2400mm
Creel Type-1 : 3055 ( 560 Ends )
Creel Type-2 : 305 ( 480 Ends )
2x Beaming machines
Max Width : 2400mm
16x Nuovo Pignone/Smit Rapier Weaving Looms
Type : FAST-R220
Year : 1994
Width : 2200mm
Shedding :Staubli 2660 e dobby (20’s)
Weft Feeder : 4 pcs/set
Let off : Electronic control
Take up : Mechanical
Accessaries:
1) Beam & Croth roller: : l.5pcs/set
2) Heald Frame:12pcs/set
3) Heald Wire & Dropper : 5000 pcs/set
Other equipments in factory:
Inspection m/c with cloth roller stock : 1 set
Reed : about 500 pcs
Electric Transfer Beam Carrier : 1 set
10HP Air Compressor : 1 set
Rewinder : 30 spindle
Mini winder : 2 spindle
Electronic Scale : 1 pcs
AA02/301225E/SYI-YI/M/AR/
Toyota Air Jet Terry Looms
Quantity: 10, Year: 2018, Model JAT810, Type JA4T-280DE-EH-T810, 280cm weaving width, 4 color, Staubli dobby Model S3222 e3 DRC, 20 Shaft Capacity, 16 levers installed, Neuenhauser off loom take up with inspection, Leno selvedges, 2 row Ground and 2 row pile warp stop motion.
Each loom installed with: 1 Ground beam 800mm diameter, 1 Pile Beam 1250mm diameter, 16 Harness frames, 4 weft feeders, 1 Weft creel stand, 2 Row Pile Warp stop motion, 2 Row Ground warp stop motion, 1 Neuenhauser Batcher. Machines are in warehouse.
For sale only as one LOT.
AB76/181225/AA/
DORNIER HTVS 4/J Rapier Jacquard Loom
AB76/181225E/CT.L-C/F/AA/
DORNIER HTVS 4/J Rapier Jacquard loom
Quantity: 1, Year: 19994, colors, STAUBLI dobby CX880, format 1408, 9980 threads, Controller JC5, 1 warp beam, 1 cloth roller, 9980 droppers, warp stop device,
AB76/181225E/CT.L-C/F/AA/
DORNIER HTVS 4/J rapier jacquard loom
Quantity: 1, Year: 1999, w.w 210 cm, 4 colors, STAUBLI dobby CX880, format 1408, 9100 threads, Controller JC5, 1 warp beam, 1 cloth roller, 9100 droppers, warp stop device,
AB76/181225E/CT.L-C/F/AA/
DORNIER HTVS 4/J rapier jacquard loom
Quantity: 1, Year: 1999, w.w 210 cm, 4 colors, STAUBLI dobby CX880, format 1408, 9985 threads, Controller JC5, 1 warp beam, 1 cloth roller, 10000 droppers, warp stop device, speed 420 rpm
AB76/181225E/YY.L-R/F/AA/
DORNIER HTVS 4/J rapier jacquard loom
Quantity: 1, Year: 1999, w.width 210 cm, 4 colors, STAUBLI dobby LX1602, format 5100, 10120 threads, Controller JC7, 1 warp beam, 1 cloth roller, 10120 droppers, warp stop device,
AB76/171225/AA/
PICANOL air jet loom type OMP-2-P cam
Quantity: 16, Year: 2001, w.width 190 cm, cam STAUBLI 1661, 4 heald frames (12 looms), 2 feeders IRO (4 looms 2×2231 plus, 3 looms 2x 1131 plus, 9 looms 1×2231 plus 1×1131 plus), 5000 heddles, 5000 droppers (3 looms with 4.000 heddles)
3 looms with ELSY RHS+ (selvedge system); 3 looms Leno ERL
6 looms with AIC/Q – weft insertion control
8 looms with PRA function (suction of broken weft)
6 looms with droppers device for 6 detection rods
3 looms with RHS selvedge scissors,
10 looms with fabric roller
3 looms with batching motion SCHOLZE W220VRF4-SEP10-190-MW4
3 looms with batching motion PICANOL PBM 3T
production of PES fabrics
AB46/161225/
Itema R9500 Looms
Quantity: 1, Year: 2012, Model- R9500, Width 210cm, 16 Under motion 6 Harness Frames Drops / healds as installed. 2-4 colors 4 Pre feeders. Staubli Dobby 2861, Voltage 440V OH (Overhead Supply), Loom Take Up 2 Beams per loom with flange of 1000mm diam.
AC13/251125/BY/
Modern HERCULES (ITEMA) Positive Rapier Loom
Quantity: 1, Year 2019, Specially configured for heavy technical fabrics and fully predisposed for Kevlar weaving. This machine is in excellent working condition and will be available for sale Dec 2025. Working width: 230 cm, Dobby 3020 (12 shafts installed – expandable to 20), 4 weft colours, Positive rapier system – ideal for rigid technical yarns, Electronic let-off and take-up with independent motors, Electronic pick finder, Back-rest for high yarn compensation (Kevlar/Aramid), 2 warp beams (Q3 grade, 1000 mm), 2 cloth rollers, Blowing & suction system for rapier cleaning, Warp recovery device with square bar support, Creel for selvedge cones, 2 motorized LENO systems, 2 motorized Kevlar selvedge cutters, Warp stop motion (6 rows) with LED signalling, LED lighting for reed area, Special waste-handling device, 4 ROJ Chrono XDX3 weft feeders (Kevlar execution), Heddles, droppers, 12 J-type frames, Kit for negative weft insertion system, Machine is still in production.
AB46/141225/
Picanol Summum -6-R
Quantity: 8, Year: 2017, Width : 220cm, Color: 6, Feeder : 6
Dobby: Staubli S3320 e3* DRC*/C4CAN, installed lever: 16shaft, warp stop bar motion: 5 bar with droppers as fitted, Beams: 2 per Machine
Beam Flange: 1000mm, cloth Rolls: 2 per machine, Machines are still installed, Very top condition from top producer with excellent maintenance program.
AE56/161225D/CL.L-A.T/F/
Toyota T810 Air Jet loom
Quantity: 12, Year: 2013, width 340cm, 1681 positive cam, 2 feeder,4 frame,7 shafts, 1 beam 1 roller, can test running
AF61/161225/CA/
DORNIER AIR JET TERRY LOOMS
QUANTITY: 4, YEAR: 2007, TYPE: EASY TERRY, WIDTH 300CM, 06 COLORS, WITH STAUBLI JACQUARDS LX1602, CAPACITY: 2688 HOOKS, JC6, YEAR 2009.
LOOMS ARE STILL RUNNING.
ACCESSORIES WITH EACH LOOM:
01 PILE BEAM,01 GROUND BEAM,03 WEFT FEEDERS,01 REED,6000 DROPPERS,, 6000 HEDDLE WIRES,
AE56/161225D/RR-C/F/
Toyota T810 Air Jet Loom
Quantity: 48, Year: 2014, Width 230cm, STAUBLI S3060 Dobby, 4 feeder, 14/16 frame, 16 shafts, 1 beam 1 roller, Running condition.
AG88/161225E/CA-A/F/
Toyota JAT 810 280CM CAM Motion
Quantity: 20, Year: 2014-2016, 6 Levers, 5 Frames, 1,5 Cloth Roller, 1,5 Warp Beam, 7000 Heddles, 7000 Droppers
AA02/151225D/YY-C/M/
Picanol OPTIMAX-I 4.R Rapier Looms
Quantity: 18, Year: 2017, 220cm Weaving width, 4 Color weft insertion system, GC Rapier guide system, Speed 650 rpm, Staubli dobby, 16 levers installed, Off Loom Take up.
Each loom with: 1 Warp beam 1000mm diameter, 1 Neuenhauser batcher type DW.1415L, 4 LGL: Eco Smart weft feeders, 8/10 Harness frames, Heddles and Droppers as installed.
AD56/141225/BC/
Toyoda T810 Air Jet looms
Quantity: 4, Year: 2022, Model: JA6F- 360ES- EF-T810, Width 3600 mm, 6 color, 6 nozzle, E-shedding, 16 shafts/16 , 06 weft feeder , 16 heald frame, 1.5 warp beam, 1.5 cloth roll, 10,000 heddle wire, 10,000 dropper, Others as attached on the machines.
AD56/121225/
Smit GS900 Rapier Dobby Looms
Quantity: 6, Year: 2005, Width 3600mm, Model: GS900, With Staubli dobby-16 lever installed , F.F (Free Flight) system.
With: 12 heald frames, 1.5 warp beam flange dia 800 mm, 1.5 cloth roll, 3 weft feeder, heddles and droppers as on loom 8000pcs.
Status : Perfectly Working
AB52/091225E/RT-A.L/C/BX/
Picanol Optimax I-4-R Rapier Looms
Quantity: 20, Year: 2016, Type: OPTIMAX-I-4-R, Width: 1900 mm, Free Fly Rapiers, 4 colours ; 2 weft feeders.
STAUBLI dobby type S3020 of 20 shaft capacity and 12 shafts installed /with 12 levers ; unbatching ; batching ; tuck in.
Accessories per loom : 1.5 beams ; 1.5 cloth rolls ; 10 healded frames.
High quality looms in very good factory.
AA10/081225E/RO-C/M/
Picanol Optimax I–6R Looms
Quantity: 6 , Year: 2018, SUMO motor, Width 2m20, 6 electronic color, STAUBLI Dobby S3020, 16 shafts, single Beam Dia. 1100, 2 IRO LUNA X3 pre-feeders, External batching motion, Suitable for Denim.
AF16/071225E/RC-C/M/AS/
Picanol Optimax-i Free Flight Looms
Quantity: 14, Year: 2017, Width:220 cm, With staubli dobby 20 shafts installed.
For each looms: 4 accumulators, 1,5 beam and cloth roller, 12 frames, 5000 dropper and heedles, 8 colours. Machines are in Production.
AA02/011225/
Picanol OMNI Plus Summum-F-R-220 Air Jet Looms
Quantity: 33, Year: 2016, 220 cm weaving width, 4 Color weft insertion system, Staubli Dobby, 16 Lever installed, Elsy Selvedge system, Double Back rest rollers, Speed 950 rpm, Off loom Take up.
Each loom with: 1x Warp beam 1000mm diameter, 1x Neuenhauser Batcher type DW.1415L, 4x Iro Blue 22 Easy Set weft Feeders, 8/10 Harness frames, Heddles and Droppers as installed.
AB46/021225/BB/
Itema R9500 Rapier Weaving With Bonas Jacquard
Quantity: 14, Year: 7×2012, 3×2013, 2×2015, Model – ZJS2
210cm width, Avg speed running at factory 650rpm, 8 color machines with 2 ROJ Luna X3 weft feeders each
Some machines with single beam and some with top beam as listed below
6 stop motion bars with droppers as fitted
All looms with Bonas ZJS2- 2688 hk capacity and 2688 installed, with Series 800 model controller
400v/50hz
Top Beam machine at Extra price, 1 beam supplied with bottom beam, 1 beam supplied with top beam, 1 cloth roll supplied with each machine
NO extra beam or cloth roller available.+ extra 3 Bonas jacquards complete with 2688 hooks
AD25/011225E/AO-C/F/
Sulzer G6500 Looms
Quantity: 5, Year: 2007, WW. 220 N8 SP, STAUBLI DOBBY MOD 2670.
Accessories per loom: 2 WARP BEAMS WITH FLANGES DIAM. 800, 2 CLOTH ROLLERS, 14 HEALD FRAMES , 04 PREFEEDERS, HEALD WIRES – DROP WIRES, DIFFERENT SPARES.
Machines in Production
Batcher not included,
Eur 1,000 is added if Batcher is included
AC32/301125/BC/
Tsudakoma Air Jet Looms
Quantity: 57, Year: 2000, Type: ZAX, Negative cam: 52 set /1900mm, Staubli dobby: 4 set /2100mm, Negative Plain cam: 1 set /1900mm, 3 Atlas Compressor with all equipments, Electric Transfer Beam Truck, Todo Automatic Tying m/c.
AE51/291125E/O.L-A/F/
Sulzer Ruti G6200 Weaving Looms
Quantity: 7, Year: 1996-1997, Type: G6200 B200 N4 SP, 4 colours, Dobby,16 frames possible, in-loom batch winder.
In production (Nov 2025) in very good technical conditions.
AA02/281125/CA/
Picanol Air Jet Looms
Quantity: 60, Year: 2012, Model Omni Plus – X, 220cm weaving width, 2 Color, Staubli Positive Cam Motion, 6 levers installed, On Loom Talke up, Electronic Take up, Electronic Let off.
Each loom supplied with: (1) Warp Beam 1000mm Diameter, (1) Cloth Roller, (2) Picanol Weft Feeder WD-X, (4) Harness Frames, Healds and Droppers as Installed.
AA02/271125/
Picanol Air Jet Looms
Quantity: 96, Year: 48×2013 – 48×2015,2016, Model Omni Plus – X, 190cm Weaving Width, Positive Cam Motion, Model 1351, 6 Levers Installed, On Loom Talke Up, Electronic Take Up, Electronic Let Off.
Each Loom Supplied With: (1) Warp Beam 100mm Diameter, (1) Cloth Roller, (1) Picanol Weft Feeder Wd-X, (5) Harness Frames, Healds And Droppers as Installed.
AB46/281125/
Tsudakoma Wide Width Airjet Sheeting Looms
Quantity: 19, Year: 1994/1995, Working Width: 280 cm, Under motion: Staubli 1600 Cam with 6 cams & 6 Harness frames, Including 1 single width warp beam with 1,000mm beam flanges, 2 main insertion nozzles, 2 filling feeders with creel stand, 6 drop wire contact bars, RH and LH side selvedge tucking units, Voltage 575 60 hz/3 phase, Alexco Batching unit (off loom cloth take up) also available at extra cost. All machines are complete and running in production at time stopped
AE02/251125/AN/
Picanol Airjet OMNI-F-6-J-3400 Loom
Quantity: 1, Year: 1999, ww. 3400 mm, Bonas jacquard LJ3 (2008), 2688 hooks.
AE02/251125/AN/
Picanol Airjet OMP-800F-8-J-2300 Loom
Quantity: 1, Year: 2005, ww. 3400 mm, Stäubli jacquard LX 1600B, 2688 hook.
AE02/251125/AN/
Picanol OMP-6-J-3400 Looms
Quantity: 2, Year: 2000, ww. 3400 mm, Stäubli jacquard LX 1600B (2004), 2688 hooks.
AE02/251125/AN/
Picanol Airjet OMNI-4-R-2200 Looms
Quantity: 3, Year: 1999, ww. 2200 mm, Stäubli dobby 2861.
AE02/251125/AN/
Picanol Airjet OMP-4-R-2800 Loom
Quantity: 1, Year: 2001, ww. 2800 mm, Stäubli dobby 2871.