AA10/240626E/ACC-O/F/
Dornier ATFS/8J Air Jet Looms
Quantity: 2, Year: 2008, Type ATFS/8J, 260 cm,DP2, Terry motion , with Bonas jacquard, 1 LJ with 5376 hooks – 1 ZJ with 2668 hooks.
Both machines with: 8 prewinders, 8 warp beams, Lot of spare parts including clutches, With frame for jacquard machine, The machines are in working conditions.
AF61/210626/
Picanol Terry Towel Summum 8-J Looms
Quantity: 2, Year: 2016, 360 cm.
1-Staubli SX 2688 hooks, 1-Staubli LX 3072 hooks
JC7 controllers, 02 Upper Beams 1100 mm, 02 Lower Beams 1000 mm, 06 Weft Feeders, With Batching, Droppers as on each loom.
AF61/210626/
Picanol Terry Plus-i ABBO111 6-R Looms
Quantity: 4, Year: 2021, 360 cm , With Staubli Dobby 3260 20/16 installing.
Accessories: 14 Heald Frames, 02 Upper Beams 1100 mm, 02 Lower Beams 1000 mm, 06 Weft Feeders, With Batching, Droppers and Heald Heald Wires as on each loom.
AF61/210626/
Picanol Terry Towel Summum 8-J Looms
Quantity: 10, Year: 2016, 260 cm.
3-Staubli SX 2688 hooks, 4-Staubli LX 3072 hooks, 3-Staubli LX 6144 hooks, JC7 controllers.
ACCESSORIES WITH EACH LOOM: 02 Upper Beams 1100 mm, 02 Lower Beams 1000 mm, 06 Weft Feeders, With Batching, Droppers and Heald wires as on each loom.
AB55/220626D/AC.L-R/F/BV
Rapier Sulzer Looms SULTEX G6500, HIGH QUALITY and in Production
Quantity: 9, 16 shafts, Speed 450 picks/min, 1900mm nominal width, Dobbies fimatextile, Big roll batcher included diameter 1000mm, Warp beams 1000mm, Weft feeders 4 per loom LGL
DETTAILS:Power Supply 400Volts / 50 Hz, Control & monitoring of parameters through a central, microprocessor
Let off & Take up with servo motor, Lef off gearing for weft density of range 6—100 picks/cm, Direct drive with inverter (allow speed adjustment )
Electronically controlled dobby (Fimtextile type SP7), Positive whip roller, Back rest roller with load cell
Automatic pick finding, Frame drive for 16 heald frames, DRC4 heald frame connection, Frame provision for heald of 13 inch
Warp beam flange diameter of 1000 mm, Prewinder with switch-over function at weft break ( LGL, Model Vector) 4 colours, Warp stop motion Type Actex A625C ( 6 rails), perfectly running
AB51/050626/AQ/
Itema A9500 Airjet Looms
Quantity: 6, Year: 2016, working widht 2100 mm, 4 colors, Electronic STAUBLI dobby (12 shafts fitted)
Each machine equipped with: 8x heald frames, 4x weft accumulators, 1x warp beam with flanges diam. 1000, 1x cloth roller, heald wires and drop wires as fitted.
Machines are in very good conditions and can be inspected any time in warehouse.
AB60/170626/
Picanol Air Jet Weaving Looms OMNIplus800-4-J-190
Quantity: 10, Year:2006, Working width 1900mm, 4 colours installed, equipped for jacquard but without jacquard.
Equipment: SUMO, ELO, ETU, PRA, 4 weft colours, 4 weft feeders Picanol type 1131CANPlus with PFL and balloon breaker, feeder stand, bobbin creel, double warp tension rolls Ø 120mm with easing motion RHS&LHS, warp detection GROB with 6 detection bars, 4000 droppers, double pressure roll, AIR-TUCKERS RHS+LHS, 1,5 warp beam Ø 1000mm, touchscreen, 2 steps, PRA dustbin, internal cloth roller system, 1,5 cloth roller, maximum speed 900RPM
Note : 2 looms year 2006 with ELDEC and both foreseen with upper beam construction (not complete) ; all looms were fitted with new SUMO engine during the maintenance programme (renewed period 2015 – 2022).
AB60/170626/
Picanol Air Jet Weaving Loom OMNIplus800-4-J-190
Quantity: 1, Year: 2009, Type OMNIplus800-4-J-190
working width 1900mm, 4 colours installed, with jacquard STAUBLI type SX2688 year of construction 2010 format 2688 hooks (installed complete; M6 modules) . Equipment : SUMO, ELO, ETU, PRA, AIRMASTER, 4 weft colours, 4 weft feeders Picanol type 1131X2 with PFL and balloon breaker, feeder stand, bobbin creel, double warp tension rolls Ø 120mm with easing motion RHS&LHS, warp detection GROB with 6 detection bars, 5000 droppers, double pressure roll, air-tuckers RHS+LHS, warp beam Ø 1000mm, touchscreen, 2 steps, waste-system with dustbin, internal cloth roller, cloth roll, cardan axe, Controller Staubli JC6, maximum speed 900TPM, ELDEC, without harness.
AJ15/050626E/CA.L-A.L/F/
Picanol Optimax 8-R Looms
Quantity: 2, Year: 2012, Width 190 cm, 8 COLORS SELECTOR, FREE FLIGHT, EQUIPPED WITH STAUBLI DOBBY S3060, 20 LEVERS INSTALLED.
ACCESSORIES FOR EACH LOOM: 04 WEFT FEEDERS, 01 BEAM (length 165 cm), 1.5 CLOTH ROLLERS, 10 FRAMES, HEDDLESS ON THE LOOM, NO DROPPER ON THE LOOM.
AA98/150626/AG/
Dornier RWV Jacquard Looms
Dornier RWV
Quantity: 4, Year: 2008, ww. 190 cm, with Jacquard Staubli DX 110,2.688 hooks , JC6 ,Each loom provided with:6 accumulators , 1,5 beams , 1,5 cloth rollers , droppers .
Dornier RWV
Quantity: 2, Year: 2009, ww. 190 cm. ,equipped of double Beams , with Jacquard Staubli DX 110,2.688 hooks , JC6 ,Each loom provided with:6 accumulators , 1,5 beams , 1,5 cloth rollers , droppers .Looms are still running in excellent condition .
AC83/150626E/YO-Y/F/CF/
Dornier Jaquard looms RWV 8/J
Quantity: 2, Year: 2010, nominal width 190 cm, 8 colours in the weft, 8 weft feeders each loom
with 2 x jacquards Stäubli, type DX 110, year 2010, 2644 hooks, modulles M6,, 2 x Harness, 10560 ropes for desgn, 4 repeats, 32 ropes for edges, 2 ropes for leno
1 x gantry for both looms, 1,5 warp beams each loom
AB46/311225/
Itema R9500 Rapier Looms
Quantity: 56, Year: 10×2013, 1×2014, 29×2014 (Upper Beam), 4×2015, 12×2016
Model-R9500, Width: 190 cm, Type: Rapier Loom
AF61/100626E/TY-Y/F/AQ/
SULZER PROJECTILE P7150 H 540 CM P540 N1 EP D12
Quantity: 2, Year: 2003, Cam motion 4 levers (capacity 10 pos), Let off electronic, take up electronic, weft insertion brake, Steel projectile, Sidac controller
n°1 twin warp beam flange Ø1000 Q3/Q4, n°1 weftfeeder Chronox2 with stand, n°4 healdframes Leno heddles, n°1 warp stop motion 6 contact bars, heddles as installed / approx 1000 pcs.
NOTE: Machines in Production as at June 2026.
AB76/090626/AA/
PICANOL GTX-4-R
Quantity: 6, Year: 1995-1998, ww 190, 2 feeders Picanol Laser, 4 colours,, Staubli dobby mod 2660, 10 frames, flanges 800, 4000 droppers and heddles., Status: looms in excellent, working condition
AG52/080626D/P.R-A.L/F/CD/
Sulzer L5400 Looms
Quantity: 61
Year: 2003
Dobby and CAM = excentricas
Width: 210CM
Sulzer/Toyota L5400 Dobby 2871
Quantity: 19, Year: 2003, WW 2,10mt, 02 feeders, 02 colors, 1,5 warp beam, 1,5 roller, warp beam diameter 1000mm, 16 frames, 16 levers, 16 levers capacity, Electronical Leno individual
Sulzer/Toyota L5400 Cams 1761
Quantity: 42, Year: 2003, WW 2,10mt, 02 feeders, 02 colors, 1,5 warp beam, 1,5 roller, warp beam diameter 1000mm, 6 frames, 6 levers installed, 6 levers capacity, Electronical Leno Group
No kit lycra, No tuckin, No batcher.
4 Looms fit in 1 Ctr.
AD26/060626E/RP.L-C/F/
Dornier PTS8/S
Quantity: 4, Year: 2008, width 220 cm, Panel 2, Staubli dobby 2670 – 20 levers with PSL (pneumatic shaft loock)
EWL + ECT, 4 colours with ECS (predisposed for 8), Accessories per loom: 6 heald frames, 1 beam diam. 800 mm, 1 cloth roller and 4 weft feeders., Jacquardette CX 172 (for leno name) not included
AE02/120526E/CO.L-C/F/AN/
Picanol Gammax-8-J-3400 Looms
Quantity: 14, Year: 2005, ww. 3400 mm, Stäubli jacquard LX 1600B, 2688 hooks, free flight.
14 Jacquard LX 1600, JC5 controller, 2688 hooks capacity, FF (free flight) rapier execution, Elsy electronic leno device, 8 colours, 8 pre-feeder Chrono X2, electronic filling insertion, 2 warp beams (dia. 1000 mm), 13.000/26.000 heddles/droppers, Grob 6 bar stop motion, Sick optical safety control, harness cut (unhooked is plus 300 Euro) – gantry optional (against payment – plus 1500 Euro)
AF74/010626/
Picanol Omni Plus Summum 4-R Air Jet looms
Quantity: 9, Year: 2017, Working width 2.20m, Max 4 colors, Staubli S1692 cam box with max 8 levers
Accessories per loom:
8 levers fully installed, 6 heald frames, 4 weft feeders , 6 stop bars, Appr. 8000 droppers, Appr. 8000 wires, 1.5 warp beam flange diam. 1000mm, 1.5 cloth roller
AD26/310526/
Picanol Optimax T220
Quantity: 12, Year: 2014, 8 colors / 4 prewinders, Staubli 3020 dobby, Capacity for 20 but 16 suspension elements installed, 14 HF / mch, FF VB, MC, 10.000 heddles / droppers / mch, 1.5 WB and CL / mch, Class 2 WB 805mm dia.
AC83/300426E/CI-A.L/C/BY/
Picanol Omniplus Summum Air Jet Looms
Quantity: 12, Year: 2013-2014, Working width 220cm, Air nozzle weft insertion type, STAUBLI Cam 1781A (Cam capacity 10 shafts)
9 shafts + 9 levers + 6 heald frames (9/9/6 installed), 9 shaft (harness+ lever) installed, 4 colours
Each loom equipped with: 4 weft feeders, 1.5 warp beams per machine dia 1000, 6 frames, 6000 heddles and droppers, 1 reed, without batcher
Machines stopped. Always using original spare parts.
AB46/300526/
Tsudakoma Air Jet Zax Looms
Quantity: 17, Year: 1994, Model : Zax, Working Width : 380cm, Color: 2col, Feeders : 2, Frames : 6, Staubli Cam : 1600, Off loom Take up, Warp Stop Motion : 6 Bar.
AH42/290526/
ITEMA ALPHA PGA Loom
Quantity: 1, Year: 2006, W:3200
STAUBLI DOUBLE JACQUARD DX100/2688 CTR.JC6 Year 2007xJACQUARD, 8 COLORS, ELECTRONIC LET-OFF,ELECTRONIC TAKE-UP, CENTRAL CUTTER, 1 SINGLE BEAM D.800, 1 CLOTH ROLLER, 4 LGL PREFEEDERS VECTOR, COMPLETE HARNESSES, DROPPERS AS ON THE LOOM.
STATUS: WORKING
AH42/290526/
VAMATEX LEONARDO Looms
Quantity: 2, Year: 2003, W:3600
BONAS ELECTRONIC DOUBLE JACQUARD IBJ2/2688 CTR.S500, 8 COLORS, ELECTRONIC LET-OFF-ELECTRONIC TAKE-UP, INVERTER, EACH LOOM WITH 1 BEAM D.800, 1 CLOTH ROLLER, 4 ROJ PREFEEDERS CHRONO HS, 14600(1)-10600(1) HARNESSES, 14600(1)-10600 DROPPERS(1)
STATUS: WORKING
AH42/290526/
SOMET ALPHA Loom
Quantity: 1, Year: 2005, W:2300
STAUBLI DOBBY 2670 20/12/12, 8 COLORS, ELECTRONIC LET-OFF, ELECTRONIC TAKE-UP, 1 BEAM D.800, 2 CLOTH ROLLERS, 10 FRAMES, 4 LGL PREFEEDERS PROGRESS, 5000 HEALDS, 5000 DROPPERS, STATUS: WORKING.
AA10/270526/
Dornier HTVS/210 Looms
Quantity: 2, Year: 1995, mod. HTVS/210 , Width 2100 mm.
Staubli double Jacquard type 860 year 1995, 2400 hooks installed, JC4, M4.
AA10/270526/
Panter Looms
Quantity: 2, Year: 2005, mod.E5XP, Width 1900 mm, of which:
(1) with Staubli Jacquard type 870, 1200 hooks, JC5, M5
(1) with Bonas Jacquart, 1200 hooks, Controller S500
AA10/270526/
VAMATEX Loom for Labels
Quantity: 1 , Year: 2004 , mod.LEONARDO SILVER , width 1700 mm, Bonas Jacquard mod. IBJX yoc 2004, 2688 hooks, Semi-satin, 6 repeats, Controller 80
AH42/110226/
SULZER P7200 B330 F4 SP D1 G TERRY LOOMS
Quantity: 3, Year: 1996(1)-1995(1), STAUBLI DOBBY 2665, EACH LOOM WITH 2 COLORS, 2 SINGLE BEAMS, 1 PREFEEDER, 6 FRAMES, 3000 HEDDLES AND DROPPERS FITTED ON THE LOOM
STATUS: STOPPED AT MILL-FLOOR, DELIVERY: ONE MONTH TO AGREE, SPLIT SALE IS POSSIBLE
AJ16/260526E/AO.L-A.L/M/BH/
Dornier Airjet AWS 4/E Looms
Quantity: 52
28x DORNIER AIR-JET LOOMS AWS 4/E – 400 cm – AT2 panel, Year 2005:
Working width 400 cm, 4 weft colors, Staubli cam motion 1761A – 6-8 shafts installed, Split warp beams execution, max. warp beam diam. 1016 mm, 2 electronic warp let-off motors (EWL – rhs + lhs), electronic take up (ECT), Positive weft clamp (PWC).
24x DORNIER AIR-JET LOOMS AWS 4/E – 400 cm – AT2 panel, Year 2007:
Working width 400 cm, 4 weft colors, Staubli cam motion 1761A – 6-8 shafts installed, Split warp beam execution, max. warp beam diam. 1016 mm, 2 electronic warp let-off motors (EWL – rhs + lhs), electronic take up (ECT), Positive weft clamp (PWC).
Accessories per loom:
2 weft feeders with el. Panel (ROJ Superelf or Superelf X2), 6 heald frames Grob 13”, 6 cams, 3 half warp beams, 6.000 heddles and droppers.
AA10/270526/
DORNIER Weaving Looms PTV and HTV
13 DORNIER weaving looms, Type PTV and HTV
width 190 cm, double beam
Years 1999, 2001, and 2003
STAUBLI dobby Type 2670/2, 20 shafts
each loom with 5 pre-feeders and 10 frames
AE02/120526E/RI.L-C/F/AN/
Picanol Gammax-8-J-3400 Looms
Quantity: 4, Year: 2005, ww. 3400 mm, Stäubli jacquard LX 1602 (year 2016), free flight.
4 Jacquard LX 1602, JC6 controller, 2688 hooks capacity, FF (free flight) rapier execution, Elsy electronic leno device, 8 colours, 8 pre-feeder Chrono X2, electronic filling insertion, 2 warp beams (dia. 1000 mm), 13.000/26.000 heddles/droppers, Grob 6 bar stop motion, Sick optical safety control, harness cut (unhooked is plus 300 Euro) – gantry optional (against payment – plus 1500 Euro)
AH42/110526/AQ/
VAMATEX P1001 SUPER EK
QUANTITY: 1, YEAR: 2001, W:3600 FIMTEXTILE ELECTRONIC DOBBY RD860 20/20/12
8 COLOURS, ELECTRONIC TAKE-UP ROLLER, ELECTRONIC LET-OFF MOTION, MECHANICAL CUTTER, LEONARDO MODEL RACE, TAPES AND GRIPPERS
EQUIPPED WITH 2 SINGLE BEAMS D.800, 2 CLOTH ROLLERS, 10 FRAMES, 4 ROJ PREFEEDERS CHRONO HS, 10000 HEDDLES, 10000 DROPPERS, RH/LH THERMIC CUTTER, DELIVERY: SEPTEMBER 2026
AB46/110526/
Toyota JAT710 Looms
YEAR: 2013, MODEL: T710, WIDTH: 230cm, COLOR: 6 nozzle with 6 feeders, SHEDDING: ESHEDDING.
Each machine accessories: BEAMS: 2 Beam (1000mm), CLOTH ROLLS : 2 Cloth Rolls, 10 Heald Frames, Wires and droppers as fit.
Four of the looms have 15 harness frames w/heddles.
The other loom has 16 harness frames w/heddles. All machines with 16 motors each.
AB76/070526/CZ/
Picanol Terry Plus 800-6-J Looms
Quantity: 9, Year: 2014-2015, ww 2600, warp beam position 13, Bonas ZJS2-28 (2688), S800 JACQUARD CONTROLLER, 6 weft feeders Picanol 2231, 2 warp beams fi 1000 and 800 mm, Heddles, droppers: ca 5168, Speed: ca 500-550 rpm, Production: terry fabric 100% cotton. Warp: tex 40,50, 25×2, 30×2,40×2, weft: tex 30,40,50. No gantry. Status: working, fully equipped.
AB76/070526/CZ/
Picanol Terry Plus 800-8-J Looms
Quantity: 2, Year: 2015, ww 2600, warp beam position 12, Bonas ZJS2-28 (2688), S800 JACQUARD CONTROLLER, 6 weft feeders Picanol 2231, 2 warp beams fi 1000 and 800 mm, Heddles, droppers: ca 5168, Speed: ca 500-550 rpm, Status: working, fully equipped.
AB46/090526/
PICANOL OptiMax-i-4-R
Quantity: 10 , Reed Width: 220 cm, Year of Manufacture: February 2017 , Color: 4
Feeder : 4 – LGL ECOSmart, Dobby: Staubli S3020 e3* DRC*/C4CAN, installed lever: 12 shaft, Frames 6, 650 rpm
warp stop bar motion: 6 bar with droppers as fitted, Beams: 1 per Machine, Beam Flange: 1000mm, cloth Rolls: 1 per machine, Electronic Leno device, Neuenhauser batch winder
AB60/070526E/T-C/F/AO/
Picanol Air Jet Weaving Loom OMNI-2-P-250
Quantity: 2, Year: 1996, Type: OMNI-2-P-250, Working width 2500mm
STAUBLI cam box 1620 with each 7 levers installed (can be increased to max.9), double warp tension rollers driven by easing motion, PRA, foreseen to work with batching motion but without the batching motion, 1 warp beam DIN. Ø 1000mm Q1, 2 weft accumulators IRO 2231B, 1 creel for 4 bobins, 4 heald frames DRC3 Schmeing Int Star EXTRA 13” J, both without warpdetection (machines have been used for weaving filament); 4000 healds 13” J with eye 5.5 x 1.2mm.
AB60/070526E/CT-C/F/AO/
Picanol Air Jet Weaving Looms OmniPlus800-F-4-R-280
Quantity: 2, Year: 07/2006, Type OmniPlus800-F-4-R-280
working width 2800mm, 4 colours, with jacquard STAUBLI type CX880, year of construction 08/2001, format 1408, 1344 hooks installed. Equipped with : SUMO, ELO, ETU, PRA, 4 weft colours, 4 weft feeders PICANOL type 1131X2 with PFL, feeder stand, bobbin creel with end bobbin detection, double warp tension rolls Ø 140mm with springs RHS + LHS, single pressure roll, Leno RHS + LHS, STAUBLI harness year of construction 2018, warp beam position 13, warp detection GROB with 6 detection bars, droppers, melt cutters RHS+LHS, touchscreen, walking step, waste-system, cardan axe, controller STAUBLI JC7 (year of construction 2016), 176 modules MP (=M6), single gantry, foreseen for warp beam T280 but without warp beam T280, foreseen for external batching motion but without external batching motion, speed 750 TPM.
AB60/070526/
Picanol Air Jet Weaving Loom OMNIplus-6-J-190
Quantity: 7, Year: 2000, Type OMNIplus-6-J-190
working width 1900mm, 6 colours, each with : 6 weft accumulators type 1131Plus, warp beam diameter 1000mm, batching motion, PRA, single weft stop. lip in reed, jacquard STAUBLI type SX year of construction 2014/2016 format 2688 hooks, controller JC7 year of construction 2016.
AB60/070526/
Picanol Air Jet Weaving Looms OMNIplus-4-P-190
Quantity: 2, Year: 2001, Type OMNIplus-4-P-190
working width 1900mm, 2 colours installed (complete), with cambox STAUBLI 1761A year of construction 2001, 10 levers installed. Equipment: SUMO, ELO, ETU, PFT, PRA, 2 weft colours, 2 weft feeders Picanol type 1131Plus with balloon breaker, feeder support, bobbin stand, double warp tension rolls Ø 120mm with springs RHS&LHS, warp detection GROB with 6 detection bars, 4000 healds & 4000 droppers, 6 heald frames Hybrid Power 152/158 type DRC3 11” C, single pressure roll, warp beam Ø 1000mm, weft cutter, waste cutter RHS, Leno RHS&LHS, white display, step, waste-system with dustbin, external batching motion PBM with walking floor and control table.
AB60/070526E/YS-Y/F/AO/
Dornier AWS-4/S-D-350 Air Jet Weaving Looms
Quantity: 4, Year: 2014, working width 3500mm, 4 weft colours (servo controlled), Electronic STAUBLI dobby type S3060 e3 year of construction 2017, 16 levers installed. Equipment : direct drive motor, left and right warp let off motor for twin beams, take up motor, bobbin creel, feeder support, 4 Feeders ROJ SUPER ELF X3 with balloon breaker and PFL, Touchscreen A1, 14 heald frames in type GROZ BECKERT ALTOP140 13” C, warp detection GROB with 6 detection bars, Dynamic Warp Guide tension system, electrical waste cutters RHS + LHS, 2 pressure rolls, waste system with dustbin, RHS & LHS twin warp tubes “heavy” type Ø 270mm with central and side flanges type SCHOLZE “Q3” Ø 1000mm, air reed, healds and droppers as on the looms mounted, 2 steps, cloth roll driving system, cloth roller, Airmaster.
AB60/070526/
Picanol Air Jet Weaving Loom OMNIplus800-2-P-250
Quantity: 1, Year: 07/2005, working width 2500mm, 2 colours, staubli cam box type 1661 with 8 levers installed, double rest roll, 5 warp stop motion bars, equipped with 2 weft feeders, 8 heald frames, 1 warp beam Ø 1100mm, predisposed for batching motion but without batcher, Elsy L&R and temple full width.
AA02/050526/BY/
New & Never Installed Smit Looms
Jacquard Looms:
AA02/010626E/TA-R/F/BY/ (Without jacquard)
8x SMIT RAPIER JACQUARD LOOMS ( Brand New )
Type M2 FAST.380.C8J
Year of manufacture 2025
Working width 3800 mm
with pre-disposed Jacquard, of your own choice, without Jacquard
8 colors weft selection
Free Flight Rapiers
Speed 800 rpm
Converging Rapiers for precise weft positioning
Programmable elec. weft-cutter, Type E-cut
Control of the weft stretching at high speed, pick by pick independently
Electronic Scissors for lateral & intermediate cutting units
On Loom Take up
Full Beam Execution
one 6 row electronic warp stop motion
complete with
1 Warp Beam
1 Cloth Roller
4 weft feeders and creel stand
10,000 Droppers
AA02/220426E/LS-A/F/BY/
1x SMIT RAPIER JACQUARD LOOM ( Brand New )
Type M2 FAST.290.C8J
Year of manufacture 2025
Working width 2900 mm
with pre-disposed a Jacquard of your own choice, without Jacquard
8 colors weft selection
Free Flight Rapiers
Speed 800 rpm
Converging Rapiers for precise weft positioning
Programmable elec. weft-cutter, Type E-cut
Control of the weft stretching at high speed, pick by pick independently
Electronic Scissors for lateral & intermediate cutting units
On Loom Take up
Full Beam Execution
one 6 row electronic warp stop motion
complete with
1 Warp Beam
1 Cloth Roller
4 weft feeders and creel stand
10,000 Droppers
Dobby Looms:
AA02/220426E/YS-A/F/BY/
6x SMIT RAPIER DOBBY LOOMS ( Brand New )
Type M2 FAST.220.C8D
Year of manufacture 2025
Working width 2200 mm
Pre-disposed for Dobby of your choice, without dobby
8 colors weft selection
Free Flight Rapiers
Speed 800 rpm
Converging Rapiers for precise weft positioning
Programmable elec. weft-cutter, Type E-cut
Control of the weft stretching at high speed, pick by pick independently
Electronic Scissors for lateral & intermediate cutting units
On Loom Take up
Full Beam Execution
one 6 row electronic warp stop motion
complete with
1 Warp Beam
1 Cloth Roller
4 weft feeders and creel stand
16 Harness frames
10,000 Droppers and Heald wires
AA02/220426E/LR-A/F/BY/
17x SMIT RAPIER DOBBY LOOMS ( Brand New )
Type M2 FAST.340.C8D
Year of manufacture 2025
Working width 3400 mm
Pre-disposed for Dobby of your choice, without dobby
8 colors weft selection
Free Flight Rapiers
Speed 800 rpm
Converging Rapiers for precise weft positioning
Programmable elec. weft-cutter, Type E-cut
Control of the weft stretching at high speed, pick by pick independently
Electronic Scissors for lateral & intermediate cutting units
On Loom Take up
Full Beam Execution
One 6 row electronic warp stop motion
complete with
1 Warp Beam
1 Cloth Roller
4 weft feeders and creel stand
16 Harness frames
10,000 Droppers and Heald wires
AA07/010526/
Picanol Optimax
Quantity: 100, Year:2012, 190 cm, GC With staubli Dobby 3060 20/18 shafts installing light denim
Accessories; 08 Heald Frames, 03 Weft Feeders, 1.5 Warp Beams 1000 mm, 1.5 Cloth Rollers or batching, 5,000 Droppers, 5,000 Heald wires
AE56/290426/
Vamatex Leonardo Towel Rapier Loom
Year: 2003, Width 210cm, STAUBLI 2670B dobby, 3 feeder,12 frame, 16-20 shafts,2 warp beam, double beam,batching device
AB46/300426D/CT.L-C.L/F/AT
Picanol Omni Plus Summum F-4-R
10 × Omni Plus Summum F-4-R – Year 2016, Reed Width: 220 cm, Warp Beam: 13 positions
machines are stopped but in great condition and show nicely
still installed on factory floor
Staubli dobby can handle 16 harness frames but installed undermotions are 12
AF16/300626E/AP.L-A.L/F/AS/
Picanol Optimax
Quantity: 24, Year: 2012 , width:190 cm , with staubli s3060-18 shafts, For each looms -4 accumylatoes -10 frames, -5000 dropper and heedles -1,5 beam and cloth roller
AD36/290426E/YA-R/F/BG
Itema Silver DT Terry looms
4 Itema Silver DT Terry looms, 260 cm wide, Year 2013 l, with top and bottom beams.
Bonas L J .Jacquard , 2013 model, 6144 hooks, 800 controller.
Loom accessories:- 8 colors- 3- Beam- 4 feeders- Roll – 1/5
AB51/280426/
VAMATEX Rapier looms LEONARDO HI DRIVE
Quantity: 12, Year: 2005, w.w. 2100 mm – 8 colors – with electronic STAUBLI dobby model 2861 (20 shafts fitted).
Each machine equipped with :
01 warp beam with flanges diam.1000 mm, 04 weft accumulator heads with stand and creel, 01 take up roller, 5.000 heald wires and drop wires, 08 heald framesMachines in very good working conditions.
AB51/290426D/RP-P/F/AT/
Vamatex looms Terry Execution DOBBY
Quantity: 2, Year: 1999, model SP1151, working widht 3600 mm, 4 colors, Machines complete with FIMTESSILE DOBBY model RD820 (12 shafts fitted).
Each machine equipped with :
01 warp beam for ground with flanges diam 800 mm, 01 warp beam for pile with flanges diam.1.000 mm, 01 weft accumulator head.
01 FORMIANUOVA batching motion for big roll.
Machines are complete , in good conditions, has been dismounted and ready to be loaded from the factory.