Showing 151–200 of 340 results

Show sidebar

AG47/210624E/AO-C/M/

Dilo Pre-Needle Loom

Quantity: 1, Year: 1980s – refurbished in 2017, ww: 2.2 m, Double board downstroke, Stroke: 60 mm, 1 768 needles/m, 1 000 rpm, with longitudinal cutting and winding unit.

AH37/281124/BF/

Spinnbau Bremen Cards

Quantity: 4
3x Year 1974 – 1976, Model F1780-500, working Width 2500 mm.
1x Year 1985, Model System 2000, Working Width 2500 mm.

AH37/281124D/YI-AI/M/BF/

3x Year 1974 - 1976

AH37/281124D/LL-AI/M/BF/

1x Year 1985

AA22/281124E/YC-Y/M/BR/

Dilo Structural Needle Loom‎

Quantity: 1, Year: 1989, Width: 4500mm, Type: DI-LOOP DS 45
Dilo invented the structuring and patterning of preneedled needlefelts in the 1960s. In this ‎process, special fork needles transport fibre loops from the needlefelt into a lamellar grid resulting ‎in pile loops on the backside of the needlefelt. By using different needle arrangements and multi-‎coloured layers of needlefelts, a great variety of patterns can be realized. A programme-‎controlled lifting and lowering of the lamellar table allows three-dimensional designs, ideally ‎used for carpets and door mats with patterns, ribcord, tufts, velour structures.‎ High capacity structure loom for ribcord, velour type needle felts and advance patterns, 40 mm ‎stroke, 1500 strokes/min, 6000 needles/lm, gauge 3.5 mm, automatic lubrication, temperature ‎control, and lubricant discharge.‎ Complete with Dilo SW 45 feeding unit and un-winding unit and control panel + electronic ‎software for patterning design.‎
Prices VALID until Dec 17. 2024 (deposit should be received before Dec 17)

AG82/261124/

Needle Punching Line

Quantity: 1, Capacity: 600 – 750 kg/h depending on fibres, Fiber: synthetic & viscos, Fiber fineness: 1,7 – 6,7 dtex, Grammage: 50 – 1200 g
Consisting of:
Blending line – Make: Truetzschler
Fine opener – Make: Truetzschler, Card feeder – Make: Truetzschler – Type: FBK
Weighing scale, Carding machine – Make: Reisky & Schlese – WW: 2.500mm – double doffer
Crosslapper – Make: Reisky & Schlese – WW: 4.500 mm, Web drafter – Make: Asselin – WW: 4.300 mm
Needle loom – Make: DILO – Type: DI-Loom OUG II S40, Metal detection – Make: Mesutronic
Winder – WW: 4.000 mm, Edge trim opener – Make: Temafa

AG47/231124E/RR-R/M/

Rieter Unimix B 7/3 Mixer

Quantity:1, Year: 1998, ww: 1.5 m, 6 chambers

AG47/231124E/RP-R/M/

Fehrer NL 28/S Pre-Needle Loom

Quantity: 1, Year: 1987, ww: 3 m, single board upstroke, stroke: 60 mm, 900 rpm.

AG47/011124E/ASS-AY/M/

Needling Line

Year: 1986, ww: 3 m
Consisting of:
1x Spinnbau double doffer card, ww: 2.5 m, avantrain + 1 swift, randomizing cylinders
1x Autefa cross-lapper, input: 2.5 m, output: 3.5 m
1x Spinnbau double doffer card, ww: 2.5 m, avantrain + 1 swift, randomizing cylinders
1x Autefa cross-lapper, input: 2.5 m, output: 3.5 m (top insertion trolley is missing)
1x Dilo OD I 35 pre-needle loom, with CBF, ww: 3.5 m, single board downstroke, stroke: 60 mm, 2 850 needles/m, 1 200 rpm
1x Dilo OD II 35 finishing needle loom, with CBF, ww: 3.5 m, double board downstroke, stroke: 60 mm, 8 000 needles/m, 1 200 rpm
1x Dilo TC 30 accumulator, ww: 3 m
1x Dilo OUG II 30 finishing needle loom, ww: 3 m, double board downstroke, double board upstroke, stroke: 40 mm, 13 300 needles/m, 1 200 rpm
1x Dilo TC 30 accumulator, ww: 3 m
1x Dilo OUG II 30 finishing needle loom, ww: 3 m, double board downstroke, double board upstroke, stroke: 40 mm, 16 000 needles/m, 1 200 rpm
1x Dilo TC 30 accumulator, ww: 3 m
1x Dilo cutting and winding unit, ww: 3 m
2x Temafa edge trim openers
Up to 400 kg/h

AA10/291024/AP/

FOR Double Doffer Card

Quanttiy: 1, Year: 1991, ww: 2.5.
+ 1 Asselin cross-lapper, input: 3 m, output: 2.5 m
Suitable for fiber 6 Denier, 64mm. Machine is with complete electrical cabinet. Production capacity is 400 kgs/hour. The electrical cabinet is year : 2014, Hopper Feeder not included, Machine is on factory floor but stopped.

AF12/251024E/YRL-RL/M/AX/

1 x 5.0m Dilo Needleloom Nonwoven Line with Dilour Raising (for Automotive)

Year: 1999
Brief technical information:

Fibre Blending
Temafa 25m Conveyor (fits 8 bales end to end)
Temafa Single pin sheet blending hopper with Volumetric feed
Temafa Fearnaught Fibre opening, Type RD02
Oiling
Temafa Metal detection
Fan

Feed to either:
Temafa Mix master blending bin with conveyor floor (approx. 20m x 4m) – Type MM20 / 2
Or

Temafa Small Blending bin (5m x 5m)
Or

2 x Temafa blending bins each approx. 2500kgs with single bin Temafa emptier

Temafa fabric condenser and feed tower (10m high)
Trutzschler FD-S fine fibre opening (2005)

Carding

Trutzschler volumetric card hopper feed
2.5m FOR multi-cylinder nonwoven card with double doffer (Serial No. 83001)
Production rate up to 500kgs per hour

Cross lapper
Autefa Cross Lapper (Type 190 73) with 2.5m inlet and 5.0m max lay width (1999)
Serial No 3026

Needlepunch

Sound proof cabinet

5.0m Dilo pre needle (Type CBF T 50, 1999)
(Input web compression sheets with finger system)

5.0m Dilo Needle loom 1:
Type DI-LOOM UD-Li S 50 (1999)
Stroke: UP
Twin Board
Total Needles 90000
Needle Density: 1800 needles /m
Max Gap: mm
Max needled width: 5.0m
RPM: 1500 (Max)

5.0m Dilo Needle loom 2:
Type DI-LOOM UD-II i S 50 (1999)
Stroke: DOWN
Twin Board
Total Needles 90000
Needle Density: 1800 needles /m
Max Gap: mm
Max needled width: 5.0m
RPM: 1500 (Max)

5.0m Dilo Needle loom 3 (Dilour):
Type DI-LOUR-II SXBG 50 (1999)
Stroke: DOWN
Twin Board
Total Needles 160000
Needle Density: 3200 needles /m
Fork needles
Brush conveyor
Max Gap: mm
Max needled width: 5.0m
RPM: 1900 (Max)

Finishing
Menzel J Box
Menzel Overhead gantry
Menzel 5m metal detection
Sellers 5m cropping/shearing + 12 bag fibre/lint collection (2008) (not been used for several years)
4 head edge and centre fabric slitting
Edge trim – Hepp-Schwamborn (Germany) – Edge shredding with fan
ETF cross cutting
ETF batching roll wind-up (2006)
Fabric measure
ETF cross cutting
ETF take-off rolls
6 x fabric roll transport trucks

Electrical Supply: 3 Phase 380-440v, 50Hz
Spare parts: All related spare parts and accessories available in the factory (If any).
Manuals: All manuals available in the factory (If any).

Currently being used in the production of: Automotive Nonwoven Velour Fabrics

Additional information:
Status: Still operating and can be seen running
Condition:Complete and in good working condition
Delivery: End March 2025 onwards
Transport: 25 x 240ft Container (Estimated)

AA10/231024/

Muller Raschel KWM Machine

Quantity: 1, Year: 2006, Gauge 10, 4 bars.

AA10/231024/

Muller Raschel GWM 1200 Machine

Quantity: 1, Year: 2004, Gauge 10, needle bar 1200 mm.

AA10/231024/

Muller Looms

1 Lot of label weaving composed of:
1x MULLER Loom mod.MUGRIP MBJ3, Year: 1997, fully reconditioned 2019/2020, updated with repair kit 2021, with Jacquard 936 hooks, semi-satin.
2x MULLER Looms mod.MVC2.1-200 15/30, Year: 2002, reconditioned 2019/2020, 25 mm., with Jacquard 384 hooks.
1x MULLER Loom mod.MVC2.1-200 14/36, Year: 2003, with Jacquard 512 hooks.

AA10/231024/

Muller Label Looms MVC 200

Quantity: 2, 120 ends + monofilament for tot. 150 ends/cm. :
(1) 20 labels 20 mm. and (1) 14 labels 30 mm., + height reducer label and expanded memory, Mudata 4 and Digikast.

AI34/231024/DL/

Autefa Cross Lapper

Quantity: 1, Year: 2005, Model: CL4000-570.3

AI34/231024/DL/

Spinnbau Drafter

Quantity: 1, Year: 2005, Model: 2094-V1-BA-2005-EN00

AI34/231024/DL/

Spinnbau Card

Quantity: 1
Year: 2005
Model: SSC-4-5PP LD

AA22/161024/

Nonwoven Spunbond Thermobonded Production Line

Manufacturer: STP Impianti Srl, with upgrades by Atex Spa.
with Kiss Roll Applicator

Configuration:
Three Independent double/twin Spinning Beams featuring Jet and Flap technology
Year of construction: 2002
Production weight range: 13 to 100 gr/m2 (standard production), 10 to 150 gr/m2 (machine specification)
Maximum speed: 450 mt/min
Maximum gross production capacity: 1400 kg/h
Maximum net production width: 3300 mm.

The production line includes:
Four gravimetric Feeders for additives and recycled polymer for each extruder
One Comerio Ercole Spa Calender with diathermic oil heating
A Kiss Roll system for applying water-dispersed additives
One Sicam Spa drying and thermal stabilization Oven with hot air and gas heating
An ISRA Vision Inspection system, model Smash, for defect and contamination detection
An ACelli Combi Winder, master roll Storage and Rewinder with Slittomatic automatic knife positioning system and Corematic automatic cutting and cardboard cores (3”- 6”) positioning
One semi-automatic packaging line by Polycomm Srl, with stretch film wrapping.

The lot includes:
A monomer Air Filter by LM Impianti srl. Year of construction: 2023
Process fluid heaters and coolers
A die/spinneret burner Oven
Three Ultrasonic die/spinneret Cleaning Tanks
Mechanical Spare Parts (including die/spinnerets and jet/ejectors)
Electronic Spare Parts
A Spare Set of cylinders for the calender.

The lot does not include polymer storage silos.

AF08/161024/CM/

Muller MVC-200 Needle Looms

Quantity: 7, Year: 1994, Still running.

AF08/141024D/AO-R/F/CM/

2 sets with new harness, in production.

AF08/141024D/AI.L-C/F/CM/

5 sets with old harness, stopped on factory floor.

AF08/101024/CW/

Muller MVC200 Needle Looms

Year: 2002-2004

AG47/270924E/TA-T/M/

Trutzschler Opening line

Quantity: 1, Year: 1997, ww: 1.2 m, consisting of: 4 Trützschler BOW 1200 bale openers, ww: 1.2 m, 1 Trützschler FM mixing opener

AG47/270924D/ARCI-OI/M/

Spunlace Line

Year: 1980-2004, ww: 3 m
Consisting of:
8x Fiber Controls bale openers, yoc: 1980 (1), 1982 (6), 1999 (1), ww: 880 mm
2x Trutzschler mixers, 10 chambers each, yoc: 1990
5x Rando fine openers, ww: 910 mm
5x Trutzschler single doffer cards, yoc: 1993, ww: 2.2 m, 2 swifts
2x drafters, ww: 3.34 m
1x Spinnbau airlay system, yoc: 1990, ww: 3.33 m
1x Fleissner spunlace system, yoc: 1999, with 7 Uraca pumps (yoc: 1999 (5), 2004 (2))
8x ASB sand filters, yoc: 2001
1x KWI flotation filter
1x bag filter
1x water pump
1x ICBT filter system, yoc: 1999
1x Spellna suction system
1x printer, ww: 3.6 m
1x padder (foulard), ww: 3.6 m
1x drum oven, ww: 3.6 m, 12 vertical drums
1x Kusters Calico thermobonding calender, yoc: 1983, ww: 4 m
1x Parkinson slitting winder, ww: 3.9 m
1x Twin City Fan Companies dust collection unit
Raw material: cotton, viscose, polyester
30-80 gr/m2

AG82/250924E/ATI.L-AI.L/M/AN/

Befama Carding

Year: 2005
Consisting of:
Befama Feeding silo
– With transport fan

Hopper feeder
– Horizontal conveyor- Spike apron- Feeding chute

Reisky&Schlese Weighting scale

Befama Carding machine
Working width: 2.500 mm- Roller feeding System- First Tambour with 2x worker/stripper- Transfer roller- Main Tambour
With 5x worker/stripper, 2x Doffer, Roller take off

AG82/060724/

Asselin Needle Loom 4-Board

Quantity: 1, Year: 1997, Type: A50S DF4, Working width: 3.600 mm, Stroke frequency: 1.500 rpm, Needle pattern: approx. 4 x 5.000 N/m, Including control cabinet and panel.

AA02/120924D/CIO-AC/F/AR/

Laroche Feeder and Conveyor

1x LAROCHE HOPPER FEEDER:
Year: 2012, 1600 mm working width, Internal Horizontal rubber feed Apron 2600mm long, Inclined rubber pinned lattice, With Pinned knock back roller at top of lattice
And pinned take off roller on discharge side.

1x LAROCHE HORIZONTAL CONVEYOR:
Year: 2012, 1600 mm working width, With rubber sheet conveyor with, Engraved herringbone grip pattern, LAROCHE electronic Metal Detector, Conveyor Length 5100 mm
With LAROCHE Fluted evener roll in enclosed housing

1x LAROCHE EXEL OPENER:
Year: 2012
2000 mm working width
With Pinned beater

AA22/060924/

Trutzschler Fiber Prep. Equip.

Quantity: 1, Year: 1995, Width: 1200mm
4x Trützschler PWSE weighing towers, with mechanical weight feeders, fed by condensor
1x collection belt
2x Trützschler FM tuftblenders (one on each end of the conveyor belt)
1x magnet trap + 01 x TV425 fan and including Trützschler WC weightcommander.

AA22/060924/

2N Tectex Crosslapper

Quantity: 1, Year: 2000, Type: CS-Mini, Ingoing width: 600mm, Outgoing width: 650mm, Small crosslapper for lab purposes, with Schneider Telemecanique variable speed controllers for asynchronous motors, PLC L689.

AA22/060924/

Trutzschler Erko Card Feed

Quantity: 1, Year: 2011, Type: EDS-W, Width: 3500mm, Completely refurbished in 2023.
Pressurized chute-feed, similar to the Hergeth MC-W Masterchute, including also;
04 x fan typ TPA 311 – air capacity max 6000 m3/hr, with profile windows
01 x Hergeth Hollingsworth FS/5 feedbox – model 6.220, completely reconditioned in 2011 with opening roll, needle row beater with aspiration channel, feeding by blow-in hood, adaption also provided for overpressure hood.

AA22/060924/

Stork Coating Unit

Quantity: 1, Year: 1999, Type: CT-IV, Width: 2200mm, Roller width 2400 mm, speed 4-80 m/min, repeat size 64/91,4 cm, effective air pressure 6-10 bar. Suitable for a variety of rotary screen-printing applications for nonwoven, paper, glass fiber or textile materials.

AA22/060924/

Marzoli Coarse Opener

Quantity: 1, Year: 1994, Type: B10/1, Width: 610mm, With 4200 (14′) conveyor, apron stripper and pinned opening roll.

AA22/060924/

Temafa Bale Openers

Quantity: 2, Year: 1990, Width: 1500mm, Hopper feeder with 6000 mm inclined spike belt. Can be offered together with MTO fine-opener as a single unit as well.

AA22/060924/

Ontec Winding and Slitting Line

Quantity: 1
Year: 2020
Width: 2100mm
The re-rolling machine is designed exclusively for wrapping and cutting flat structures made of nonwoven and PE-foil. The nonwoven is conveyed through the system from an unwinding device. After unwinding, the goods run through a take-off unit with a dancer control. In the fabric winder, the goods are cut into strips before they are rolled up. After winding, the goods can be removed from the system with a lifting device.
The re-rolling machine has a modular structure for each station. The basic components are as follows:
Unwinder with edge control unit
Draw unit with linear dancer
Walking bridge
Rewinder with longitudinal cutter located on the infeed frame with 13 knife units that can be adjusted laterally.
Max working speed 80m/min, for materials up to 4 mm thickness and 400 gsm, minimum slitting width is 20 mm.

AA22/060924/

Testa Winding and Slitting Line

Quantity: 1, Year: 1999, Type: 111 ST EK2, Width: 2600mm.
Ingoing roll width minimum 800 and maximum 2600 mm, two slitting knives for edge trim (or different cuts) installed. Slit dia of finished rolls – 300 to 800 mm, max 80 kg/each, speed: 150 m/min, with fully automatic roll wrapping and cutting as well as thermal splicing. Fully controlled by Siemens S7-1200 PLC and HMI user friendly operation interface (Spanish/English).
Line is in good condition and very well maintained.

AA22/060924/

Reisky & Schlese Slitter

Quantity: 1, Year: 2014, Width: 3000mm, Consisting of 5 knives, adjustable to min 400 mm and max 3020 mm. Running “standard” wadding as well as compressed products 160 kg/m3. Cooling system for the knives by nozzles spraying water fog.

AA22/090924D/AOC-AY/F/AR/

Dilo Structural Needle Loom

Quantity: 1
Year: 1987-2021
Type: Di-Lour II 25
Width: 2500mm
Completely rebuilt and upgraded with brand new electronics in 2021. Further aftermarket upgrades:
1. eccentric air cooling system: eemperature auto start
A. temperature sensors on each eccentric
2. central lubrication system for eccentrics & main bearings: automatic (Time Auto Start) & manual greasing
A. pressure sensor on grease lines
Machine consisting of: 2 needle boards and 1 “dummy” board – 8000 needles/linear meter, approximately 1640 brushes with bristle height of 20 mm, 980 rpm, and max conveyor speed of 5.6 m/min and max draw-off roller speed 6 m/min, main motor of 34.5 kW.
Electrical controls (new in 2021) consisting of 4 HMI screens;
1. Main Screen: eccentric speed (spm), brush conveyor speed (m/min), draw-off roller speed (m/min), penetration depth (mm), gap (mm), stitch density (cm*cm), run time.
2. Adjustment Screen: auto-penetration depth (mm), auto-gap depth (mm), manual penetration depth (mm), manual gap depth (mm).
3. Grease System: automatic grease time intervals, manual grease system.
4. Brush Cleaning Mode: automatic cleaning time, manual setup of cleaning process.

AA22/060924/

Dilo Needling Equipment

Quantity: 2, Year: 1989, Type: SKE, Width: 250mm, Capacity: approximately 420 pieces/hour waddings for 420 pairs of shoulder pads, depending on size. Automatic ejector, base material max 250 mm width, ingoing roll dia – max 500 mm. Consolidating of wadding by 1 needle board with max 500 felting needles.

AA22/060924/

Dilo Needling Equipment

Quantity: 1, Year: 1989, Type: SKR, Width: 900mm, Capacity: approximately1800 pairs/hour at 9 mm advance and a medium pad size. Frequency adjusted pneumatic ejector mechanism. 2925 needles, inserted in one needle board type ALPA with a lateral distance of 4 mm, stroke 60 mm, stroke frequency max 500/min, penetration depth max 22 mm, adjustable stroke advance from 6-19 mm, infinitely adjustable gear drive 1.5 kW.

AG47/060924E/CIII-AII/M/

Ramina P200 Meltblown Line

Quantity: 1, Year: 2020, ww: 1.6 m, Raw material: polypropylene
, 17 – 1 000 gr/m2
, Up to 400 kg/h.

AG47/220524E/ROI.L-RL.L/M/

Needling line

Quantity: 1, Year: 1994-2015, ww: 2.7 m, Consisting of:
1 FOR Minicard double doffer card, yoc: 2003, ww. 2.5 m, up to 400 kg/h
1 Tomes cross-lapper, yoc: 2003, input: 2.7 m, output: 3.8 m, up to 65 m/min
1 Automatex PR30/TBF pre-needle loom, with batt feeding system, yoc: 1994 – refurbished in 2022, ww: 2.7 m, single board downstroke, single board upstroke, stroke: 70 mm, 1 100 rpm
1 double cylinder thermobonding calender, yoc: 2015, ww: 3.3 m
1 cooling calender, yoc: 2015, ww: 3.3 m
1 Heuer cutting and winding unit, ww: 3.3 m

AA22/060924/

Dilo Finishing Needle Loom

Quantity: 1, Year: 2004/2013 , Type: Di-Loom OD-II HSC 12.5 , Width: 1250mm
including Dilo feeding system by a pair of polished feeding rollers, free-standing frame. Pressure roller pneumatically operated for easy threading of material and fine adjustment of the nip. Driven by 1*AC-S gear motor.
01*Hyperpunch OD-II HSC 12.5 special needle loom with elliptical needle beam kinematics for light weigh felts and highest throughput speed, needle beam made of carbon fiber reinforced composite material, installed on vibration dampers.
Application: light weigh felt – extremely high throughput speed
Needling system: from top – by 2*needle boards, needle beam moves vertically or horizontally
Max working width: 1250 mm
width of needle boards: 200 mm
number of needles: 2*6667 needles per linear meter
vertical needle stroke: 30 mm
horizontal needle stroke: 10 mm
max stroke: 2600 strokes/min
Material transport: by 1 pair of delivery rollers driven by 1*AC-S-gear motor
Automatic central lubrication system for eccentric and main bearings, lubricant drainer in module housing, incl pressure and temperature control of the eccentric bearings
Multi motor AC-drive for inverter operation – speed infinitely adjustable – maintenance free – reversing movement without limit switches.
Complete with SPS Siemens S7 and MP 270 PLC system.
Lab machine primarily for use at institutes, educational environments and R&D divisions for laboratory purposes and development of non-woven products. This very versatile machine can also be used for industrial purposes for small scale production of niche products.

AG47/280824E/RS-Y/M/

Malimo Maliwatt Stitch-Bonding Machine

Quantity: 1, Year: 1992, ww: 2.4 m, gauge: 7, with winder

AB34/210824/

Dell’Orco & Villani Carding Opener

Quantity: 1, Year: 2020, Model: CO 1500, Working width: 1500 mm, Complete with a fan and separator. Additionally, there is a main drum and a working roller in stock. The machine is in very good condition (very little used). Capacity 300kg/h, Installed power 20 KW.

AG82/200824/

Partial line: Carding Machine, Cross lapper

Consisting of: Hopper feeder, Weighting scale, Nonwoven card – Make: Reisky & Schlese – WW: 2.500 mm – double doffer
Cross lapper – Make: Reisky & Schlese WW: 3.500 mm

AG82/200824/

Partial line: Carding Machine, Cross lapper

Consisting of:Feeding silo – Make: Befama
Hopper feeder, Weighting scale, Carding machine – Make: Befama – WW: 2.500 mm – double doffer, Cross lapper – Make: Befama – WW: 3.000 mm

AB34/200824/

Antonio Guasch Grano S.A. Needle Loom with New CBF

Quantity: 1
Year: 1992
Brand: Spain
Completely renovated mechanically and electronically in year 2024, April
working width: 2600 mm, needling from top
stroke: 60 mm, 1 x 3.000 needles/m
Power supply: 400 V, 50 Hz, installed power: 11 kW;
working speed: up to 800 rpm
controlled by inverter, input belt conveyor, needle plates leaded by sleeves (very practical solution)
very simple (means: trouble-free) eccentric motion transmission, spare needle plate.
The machine has been renewed recently: new bearings, new sleeves new shaft, new plates etc., practically the entire machine is new, only the frame is old.
Just switch on and work. Machines of the type are highly praised by our customers.
Excellent technical solutions – as simple as possible, thus very effective, durable / almost flawless in comparison with solutions of other European manufacturers.

AB34/200824E/CSS-AL/C/AZ/

Needle-Punched Nonwoven Fabrics Line

The following weights of nonwoven fabric can be made on the production line: 200 – 1000 g/m²
Line efficiency: 300 kg/h
Final working width of the nonwoven fabric: 2500 mm
Power supply: 400 V, 50 Hz, installed power: 62 kW
The line is equipped with modern control in control cabinets.
Necessary area for the rope: length: 17 m, width: 10 m.

consisting of:

1x Temafa Mixing chamber with a pneumatic scale on strain gauges for portioning the load onto the carding machine, Year: 1999, mechanical and electrical modernization in 2021 and 2024, length: 5 m, width: 3 m

1xSpinnbau one doffer carding machine, mechanical and electrical modernization in 2023/2024, working width: 2200 mm.

1x Hergeth cross-lapper, mechanical and electrical modernization in 2021, input: 2,5 m, output: 3,0 m, up to 50 m/min.

1x Automatex, Italy nonwoven needle loom, Year: 2008, with new CBF; total modernized mechanically and electrically in year 2023/2024, working width: 2700 mm, needling from top, stroke: 60 mm, 1 x 5.000 needles/m, installed power: 31 kW, working speed: up to 1100 rpm, For the machine are: 2 needle boards in the machine, 2 spare needle boards, The machine have been renewed recently: new bearings, new sleeves, new oil seals (Simmerring) etc. Excellent technical solutions – as simple as possible, thus very effective, durable/almost flawless, 1 control cabinet on the current level of technology.

1x longitudinal cutting and winding machine for non-woven fabrics, Year: 2023, working width: 2500 mm.
consisting of:
round longitudinal cutting knives – 5 pcs., each knife, made of special hardened machine steel, each knife can be moved separately to set the desired cutting width of material strands/ribbons, pneumatic pressure using pneumatic actuators for each knife separately, Hardened pressure roller under the knives. On request, new knives can be added and the working width of the entire longitudinal cutting device can be increased or decreased as desired. The cutting machine’s drive is synchronized with the end winder of the production line via a chain and gear.

This line is in very good mechanical and electrical condition. All wearing parts are immediately replaced with new ones, including carding machine covers, drive chains and others.

For transport – 3 x 40’HC containers.

AG47/160824E/CA-L/M/

Malimo Maliwatt Stitch-Bonding Machines

Quantity: 2, Year: 1984, ww: 2.4 m, gauge: 7, with winder, each machine is available separately

AG82/140824/

Asselin Crosslapper

Quantity: 1, Year: 1994, Type: ELITE, Working width: input 2,8 m / output 2,9 m, Speed: 75 m/min
Additional information:Original control panel, NT transmission installed, Automat, , variators and motor changed in 2009

AG82/300724/AN/

Laboratory Carding Line

Details:
Make: Befamatex, Year: 1993, Type: CU070, Condition: very good / rarely used

Consisting of:
Pre-Opener / Carding Willow, Type: AB 3 A, Working width: 600 mm, Feeding Chute
Carding machine, Working width: 700 mm
Roller feeding: 2x D:45mm
Pre-Cylinder: Type 2BK, D: 400 mm, 2x Worker D: 123 mm , 2x Stripper D: 68 mm, Transfer roller: D: 270 mm
Main Cylinder: Type 2BK/700, D: 500 mm , 3x Worker D: 23 mm
3x Stripper D: 68 mm, Volant; D: 152 mm, Doffer: D: 500 mm / with Fly-Comb

Cross lapper, Type JX07, Inlet 700 mm, Exit 1000 mm

Incl. Electrical Control System

AG82/300724/

Laboratory Needle Felt Line

Details:
Make: DILO
Year: 1980 & 1988

Consisting of:
2x Carding Machine
Year: 1980
Working width: 500 mm
Diameter Main Cylinder: 320 mm

1x Crosslapper
Type: Dilo – NLFP 6
Year: 1980
Working width: 600 mm

1x Pre-Needle loom
Type: Dilo – F 5/6
Year: 1980
Working width: 600 mm
Needle Density: 2x approx. 1.760 Needles/m

1x Finish Needle loom
Type: Dilo – OUG II 6
Year: 1988
Working width: 600 mm
Needle Density: 2 x 2 x 2.875 Needles/m
Needle Pattern: 4-W8-200-25-11500

AG47/260724E/ARI-AL/M/

Sicam Thermobonding Oven

Quantity: 1, Year: 2011, ww: 2.5, double belt, 2 zones, cooling section, calender, cross cutting machine.