Showing 501–550 of 642 results

Show sidebar

AB28/180624/

LAMPERTI Raising Machine

Quantity: 1, Year: 1983, Type GA/L80, wire width 300 cm, 30 raising rollers

AB28/180624/

TORRES Raising Line

Composed of:
Raising Machines , Quantity: 2, Year: 1999, Type PV-108/P, wire width 300 cm, each machine 30 raising rollers (total 60 raising rollers)

AB28/180624/

Comet Raising

Quantity: 1, Year: 2000, Type CYGNUS X1, Wire width 320 cm, 36 raising rollers.

AA05/160624D/LR-AI/F/

Zonco Washing Machine

Quantity: 1, Year: 1999, mod Flexicom, Carry out rapid fulling and Washing operations in different process combinations on wollen and mixed weight articles test.

AE56/170624/

Zimmer Rotary Printing

Quantity: 1, Year: 2005, 12 Color, 200cm Working Width, 4 Chamber Dryer, Steam heated, Magnet type, Simens PLC, repeat 640mm.

AC96/130624E/RYT-CI/M/BB/

Xetma 4 Units Raising Line

Quantity: 1, Year: 2018, Working width: 3300 mm, Operation: different modes of raising possible. Fabric feeding and delivery on the same side. The machine is still in operation.

AF14/120624E/TY-T/M/AQ/

Zimmer Printing Chromojet LT 35

Quantity: 1, Year: 2005, mod. CHROMOJET LT 35, w.w. 2300 mm, 8 colors, Semi-new, Working hours: approx. 600 hours (new), Power supply: 400V, 3 – 50Hz, 10kVA, approx. 15 A, Air pressure on site: max 6 bar, Water pressure on site: max 3 bar, Maximum printing width: 2,150 mm, Maximum repetition length. 50 m, Length: 8,480 mm, Width: 2,300 mm, Number of colors: 8, Number of jets per color 32, Resolution (dot size): 600 pt/m (1,666 mm), Color pumps: 1/2″ diaphragm pump, Machine dimensions: 4150 mm x 3820 mm xh 1600 mm, The line includes: Chromojet with 8 pumps, control panel with software and electrical panels, Overall dimensions: length. 4150 x w. 3820 x height mm. 1600.

The machine is stopped and the drying and washing are not included. Washing was done with the spray nozzles and the drying by a Small oven.

Note: WITH ONLY 500 HOURS WORKING.

AC93/120624/

RCM Recomo Coating Instalation

Quantity: 1, Year 1990 , 2 COATING HEADS, 2 THERMAL OIL HEATED OVENS, ROLLER WIDTH 3.300 MM
INVERTERS DRIVEN CONTROL PANEL

AD63/110624/

Reggiani Rotary Printing

Quantity: 1, Year: 1990, Model: RENOIR FUTURA, Useful working width: 1.850 mm. Non-stop introduction of the TESTA brand, N. 8 print heads, N. 8 colors introduction pumps, Oven with 3 chamber gas-heated, Suitable for woven and knitting fabrics.

AE56/100624D/AAS-S/F/

Goller Washing

Quantity: 1, Year: 2013, width 220cm, 7 padder, 7 washing box. Running conditions.

AG54/060624/

Bruckner Stenter

Quantity: 1, Year 1997,Working height 2200mm, 4 fields, gas powered, horizontal chain, Flap exit.
There is no weft straightener. There is no Padder.

AC23/070524E/TA-L/F/BM/

Krantz Stenter Knits

QUANTITY: 1, YEAR: 1998, WW 2400 MM, GAS
PRE-TENSION ENTRY, BIANCO COMPACT C GUIDER WITH DRIVEN SCROLLS BIANCO 2 BOWL ‎PADDER
SETEX – WEFT STRAIGHTENER 6 SCANNERSKRANTZ STENTER TYPE K-20
‎6 METRE ENTRY RAILS WITH TANDEMATIC EDGE SPREADERS E+L GUIDERS, OVERFEED PLUS ‎‎50%,‎
GUMMING & TRIMMING SYSTEM
VERTICAL PIN CHAIN, MODEL: K20, 6 CHAMBERS
BURNER TYPE: GAS – MAXON, MODEL VALUEPAK BA-350,‎
EDGE TRIMMING WITH VACUUM SUCTION
COOLING ZONE, TAKE OFF BY PLAITER
NEW SOFTWARE, UPGRADED 2007 & 2014, SIEMENS STEP 7 TOUCHSCREEN CONTROLS, ‎EXCELLENT CONDITION.‎
Special fitted for knitted

AB46/050624/AR/

Babcock Wash/Scour Range

Quantity: 1, Year 2001 , Entry and exit rollers are 4.6m width, with 4 wash boxes, Barco monitoring system
Menzel accumulator model 110PS01 year 2015 at entry, fed from A-frame with automatic unwinder
Menzel compensator with multiple rolls
Potable water utilized in heat transfer process and dispensed to sewer, steam condensed and returned to condensate tank for reuse in boiler
Wash box #1 has 15 rolls
Wash box #2 has 17 rolls
Wash box #3 has 17 rolls
Wash box #4 has 16 rolls

AG54/030624/

Salvade Steamer

Quantity: 1, Year: 2009, Working height 2200mm x 2000mm, Contents 450 meters, The machine can be used for low temperature steaming (102 ÷ 104 °C) or as high temperature vaporization (160 ÷ 180 °C), and is equipped with a steam superheating system with two methane gas burners.

AE56/030624/

Monforts Stenter

QUANTITY: 1, YEAR: 2010, 260CM ROLLER WIDTH, 240CM WORKING WIDTH,9 CHAMBER ,OIL HEATED,1 PADDER, Without WEFT STRAIGHNER,PIN CHAIN,LENZE INVERTOR ,SIMENS PLC,SIMENS MOTOR, STOPPED CONDITION.

AB32/310524E/COC-CI/M/BY/

Bruckner Sanforizing Machine

Quantity: 1, Year: 2005, Model: OS 18, Roller width: 2.000 mm, Working width: 1.800 mm
Entry with accumulator, WEKO – FLOW humidification unit
Cylinder for dragging fabrics with control, Steaming cylinder
MAHLO weft-straightener with optical heads
Equalizing unit with chain and clamps width 1.600 mm, Extractor cylinder
Shrinking unit with rubber ring
Device for grinding the rubber ring, Bar brake
Spreader roller at the entrance of the felt calender
Felt calender, diameter 2.500 mm
Felt drying drum diameter 1.200 mm
N. 3 cooling drums, diameter 640 mm each.
Accumulator for fabrics at delivery
Contact winder for large rolls
Electrical cabinet, control by PLC, control elements and display of return
values

AA10/300524/

Monforts Sanforising

Quantity: 1, Year: 2002,Type MONFORTEX
working width: 1 m 80, consisting of: Entrance with J-box, steaming cylinder, stentering unit, Rubber belt, felt calander, J-box, winder

AA10/300524/

Unitech Stenter

Quantity: 1, Year: 2019, Type RED EVO, Width: 2m20, 6 compartments, gas, 2 BIANCO Padders, BIANCO weft straightener, equipped for knitted fabrics.

AA10/300524/

Monforts Stenter

Quantity: 1, Year: 1999, For weaving fabric and knits, Type MONTEX -7F-Twin air, Working width 240 cm, 7 chambers, Thermo-oil heating, 1 Cooling chamber, 2 extractors.

AA10/030624E/OL-L/M/

Lafer Compacting Line for Knitted Fabrics

Quantity: 1, Year: 2007, Type KSA 500, , Belt width 2m40, with its small stenter and steaming

AE56/270524/

Monfongs Stenter

Quantity: 1, Year: 2010, width 260cm, 8 chamber, oil heated, with MAXON burner, with center padder, Horizontal chain, running condition

AG54/250524/

Lafer Brushing

Quantity: 1, Year: 2003, Working height 2200mm, Model GSI 106, Controlled by inverters, With motor and dust extraction.

AE56/200524D/ATL-T/F/BA/

Zimmer Printing

Quantity: 1, Year: 2012,2013,16 Color, 280cm ,300cm Working Width, 4 Chamber Dryer , gas heated,maxon burner,Magnet type ,simens PLC,repeat 640mm, Stopped

AE02/180424E/OAI-YI/M/

Benninger Mercerising

Quantity: 1, Year: 2018, Ben-Dimensa ML2, ww. 1900 mm , 4 washing departments, dosing station

AD26/150524E/ATY-AC/F/

Unitech Stenter

Quantity: 1, Year: 2013, 8 chambers, Working width 2200 mm. Vertical clips chain. Beta padder 2 cylinders. Bianco weftstraightener with banana enlarger. Gas heated.

AD26/130524/

Crosta Shearing

Quantity: 4, Year 1998, Width 210 cm, 1 blade.

AE56/110524/

Monfongs Stenter

Quantity: 1, Year: 2017, width 240cm, 10 chamber, steam heated, with center padder, Horizontal chain

AF95/100524/

Xetma Raising

Quantity: 4, Year: 2018, For woven fabrics, Type: OPTISYSTEM XR3C, Roller Width: 3400mm, Working Width: 3200mm, Number of Raising Rollers per machine: 30, Touch Screen Control, 2 x Filter Plants with Bag Filters with Suction Fan and Motors.
NOTE: All 4 machines can run in Tandem. OR Fabric can be passed from all 4 machines or with any combination of 1 to 4 machine as bypass rollers are available.
380v, 50hz, TOP CLASS CONDITION, LIKE BRAND NEW!!!

AD26/100524E/AOO-AC/M/AQ/

Monforts Single Layer Stenter

Quantity: 1, Year: 2007, 8 gas chambers, Model: MONTEX 8F-V, Useful working width: 2.200 mm., Weft straightener brand BIANCO, with 6 optical heads, year 2002, Nr. 8 chambers gas heated, Nr. 8 Maxon burners, Horizontal pin chain, Length of the input arms: about 5000 mm., Steamer under the entry arms, Cutting device and selvage suction device, Cooling system at the exit from the oven, Delivery fabric in plate and in tangential big roll, Double exhauster for the expulsion of exhausted fumes, Electrical cabinet, Machine suitable for knitted and woven fabrics. The machine is still in running condition, but it has been stopped lately due to little work.

AE56/060524E/AIC-P/F/BY/

Karl Mayer Sizing Machine

Quantity: 1, Year: 2012, width 320cm, Double tank 200cm,9 unit, 12 pcs cylinder dia 800mm, 5 set beam creel, 24 beams, 3 chemical tank

AC96/260424/

Complete Fabric Finishing

Pos.1 GOLLER/OSTHOFF singeing/desizing, Type: DESIZAR, WW: 3200 mm, Year: 2005, Capacity: 7200 m/h
Pos.2 GOLLER continuous bleaching, Type: COMPLEXA, WW: 2600 mm, Year: 2005, Capacity: 6000 m/h
Pos.3 GOLLER chain mercerizer with washing, Type: CADENA/EFFECTA, WW: 2600 mm, Year: 2005, Capacity: 3300 m/h
Pos.4 MONFORTS stenter frame, Type: 45-T-72562, WW: 2400 mm, Year: 2004, Capacity: 9000 m/h
Pos.5 ZIMMER coating/printing – builtin, Type: MAGNOROLL, WW: 2450 mm, Year: 2011
Pos.6 MONFORTS stenter frame, Type: 45-T-72566, WW: 2400 mm, Year: 2004, Capacity: 9000 m/h
Pos.7 GOLLER continuous pad batch dyeing, Type: ECONOMICA, WW: 2400 mm, Year: 2005, Capacity: 3600 m/h
Pos.8 IVTEC MASH washing line, Type: LPS-180, Year: 1970
Pos 9 RAMISCH GUANERI Nipco L calendar , Type: RGK 3100, WW: 2600 mm, Year: 2004, Capacity: 6000 m/h
Pos.10 RAMISCH calendar, Type: 3 Rollers, WW: 1600 mm, Year: 1990, Capacity: 6000 m/h
Pos.11 AVOGADRO SRL boiler equipment ST 12000, Year: 2005, Capacity: 12 t/h
Pos.1a ZIMMER rotary printing, 16 colours, Type: ROTASCREEN V APR 652, WW: 2475 mm, Year: 2003
Pos.2a ZIMMER rotary printing, Type: ROTASCREEN V APR 625, WW: 1925 mm, Year: 2004
KEBA Sensor control panel, Type: PCOF 450/C, Year: New
Pos.4a 3x EKERMAK fabric inspection & batching, Type: KDS SOO DK, WW: 2700 mm, Year: 2004
Pas.5a EKERMAK autom.roll/packing, WW: 1200 mm, Year: 2004
Pos.6a 2X EKERMAK double folding machine, Type:TRS-2, Year: 2004
Pos.7a EKERMAK convoyer 13 m, Year: 2004
Pos 8a 8x EKERMAK A-frames, WW: 3000 mm, Year: 2004
Pos.9a 26X EKERMAK A-frames, WW: 2700 mm, Year: 2004

12 ABAC compressor, Type: FORMULA ES-1108, Year: 2005
13 ATLAS COPCO compressor, Type: GXSFF, Year: 2005
14 ATLAS COPCO compressor, Type: GX22FF, Year: 2005
15 ABAC compressor, Type: B-28001-50, Year: 2005
16 ALUP compressor, Type: HLlOS0-73, Year: 1990

Pos.10a stencil department, WW: 3500 mm, Year: 2004

===

Pos.1
Modular pre-treatment of woven fabrics Goller Desiza with patented beating device Osthoff designed for:
1. Singeing of fabrics (removal of sagging fibers, threads,fluff) by singeing with a gas burner.
2. Impregnation with a solution of chemical products for wetting the fabric and desizing it.
Fabric width: min 1600 mm max 3200 mm.
Shaft width: 3400 mm
Fabric denshy: 100-400 g/m2
Production speed (m/hour): 7200
Year 2004

Pos.2
Bleaching Line Goller Complexa
Fabric width: min 1200 mm max 2600 mm.
Shaft width: 2800 mm
Fabric density: 100-400 g/m2
Production speed (m/hour): 6000
Year 2004

Pos.3
Mcrcerisation Line Cadena Effecta designed for:
1. 1. Short-term treatment with a sodium hydroxide solution to give the fabric strength and silky shine.
2. Itnproving hygroscopicity.
Fabric width:min 1200 mm max 2600 mm
Shaft width: 2800 mm
Fabric density: 100-400 g/ m1
Producdon speed (m/hout): 3300
Year: 2004

Pos.4
Stenter frame machine 45-T-72562
Designed for drying and stabilization of the fabric.
Dressing the weft with the device Mahlo.
Additionally equipped with integrated coating machine.
Magnoroll type RMR-RS 1200 MK IV
Fabric width : min 600 mm max 2400 mm.
Nominal width: 2600 mm
Production speed (m/hour): 9000
Year: 2004

Pos.5
Magnoroll coating and printing machine type RMR – RS 1200MK IV (built-in Monforts 45-T-72562 stenter frame)
Designed for coating of foams, pastes on fabrics using the section with a knife for coating, as well as printing on fabrics using one template.
Working width: 2450 mm
Shaft width: 2800 mm
Production speed (m/hour): 3000
Year 2011

Pos.6
Stenter frame machine 45-T-72566
with built – insection of pre – drying thermal emission type VTGG 2×2
Designed for drying and stabilization of fabric, dressing the weft using a Mahlo device with an integrated VTG 2×2 heat radiation pre-drying section.
Used for pigment printing, processing fabrics OWR (oil­ water-repellent impregnation).
Infrared section – temperature 800°C
Fabric width: min 600 mm max 2400 mm
Nominal width: 2600 mm
Production speed (m/hour): 9000
Year: 2004

Pos.7
Continuous line of pad-batch dyeing Goller Economica with Kusters floating shafts.
designed for the process of continuous dyeing with active dyes.
Fabric width: 2400 mm
Fabric density: 100-400 g/m2
Production speed: min 360 m/hour max 3600 m/hour
Year 2004

Pos.8
Line for washing and drying of fabrics LPS-180
designed for washing of fabrics after operations of continuous dyeing.
Year 1993

Pos.9
3 -Bowl Calender Ramish – Guarneri RGK 3100 with NIPCO®”L”bowl
designed to process fabric by passing through shafts.
Processing gives fabric smoothness and gloss.
Fabrics width: max 2600 mm, min 1100 mm
Shaft width: 2800 mm
Processing speed: min 300 m/hour, max 6000 m/ hour
Year 2004

Pos.10
3 -Bowl Calander Ramisch – Kleinewefers
designed to process fabric by passing through shafts.
Processing gives fabric smoothness and gloss.
Fabrics width: 1nax 12000 mm, min 600 mm
Shaft width: 1800 mm
Processing speed:
min 600 m/hour
max 12000 m/hour
Year 1990

Pos.11
Boiler type ST – 12000
Burner EB7 M Energi (Italy)
Production: 12000 kg/hour
Year 2005

Pos.1a
Printing machine Rotascreen – V – APR – 652
designed for rotary printing with sixteen shafts (16 colors).
Working width: 2525 mm
Print width: 2475 mm Maximum colors quantity: 16 Production speed:
min 240 m/hour, max 6000 m/hour
Year 2003

Pos.2a
Printing machine Rotascreen -V- APR-625
designed for rotary printing with 10 shafts (colors).
Working width: 1925 mm
Print width: 1550 mm
Maximum colors quantity: 10
Production speed: min 180 m/hour,max 6000 m/ hour
Year 2003

Pos.4a
Technological line for inspecting and packing of finished fabrics
designed for sorting, measuring and winding fabric on rolls. Equipped with labeling system.
Fabric width: from 1200 to 2400 mm
Fabric density: 100-400 g/m2
Year 2004

Pos.5a
Technological line for inspecting and packing of finished fabrics
designed for doubling vide fabrics using the device «Ballerina>>.
Year 2004

Pos.6a
Technological line for inspecting and packing of finished fabrics
designed for packaging fabric rolls in plastic wrap.
Automatic roll packing machine 800 – 1200 mm – 1machine
Year 2004

Pos.7a
Conveyor belt 13 m
Transporting of fabric rolls from double folding machine TRS-2 to the packing machine Ekerpack 800 – 1200
mm.
Year 2004

Pos.8a+9a
Contact trolley for winding and transporting of the fabrics width 300 cm
Quantity: 8
Contact trolley for winding and transporting of the fabrics width 270 cm
Quantity:26
Year 2004

Stencil department
Dr.Wirth GraAache Technik GmbH & Co.KG Illuminated stand for rotary screen
Quantity:1
Stencil length: 3500 mm

Engraving system CST Inkjet 3500 for rotary stencils Release year 2004
Device for gluing the rings on the templates
Quantity: 1
Release year 2004

Semiautomatic machine for application of coating on rotary screen RSL – BLM
Quantity: 1
Release year 2004

Drying cabinet RSL-TS
Quantity:1
Release year 2004

Polymerization cabinet RSL-P
Quantity: 1
Release year 2004

Unpacking Device RSL-AV
Quantity: 1
Release year 2004

Manual device for the development RSL-EW
Quantity: 1
Release year 2004

AA10/250424/

MONTI Calendering/Compacting line for knitted Fabrics

Quantity: 1, Year: 2005 , Type 907.2, width 2 m 40, Fed by a MONTI mini stenter

AE02/260424/

Monforts Sanforizing Machine

Quantity: 1, Year: 2002, Type Monfortex, ww. 500-1800 mm, steam heated

AE02/260424/

Mahlo Weft Straightener RVMC-12E

Quantity: 1, Year: 2007, ww. 1800 mm

AE02/260424/

Osthoff Singeing Machine U97

Quantity: 1, Year: 1998, ww. 1800 mm, two sides burner, J-scray

AE02/260424/

Bruckner Coating Machine

Quantity: 1, Year 2007, ww. 600-2000 mm, clip and needle chain, dryer (15 meter), storage 45 m, Siemens controller (with Lenze FU), heating thermo oil

AE02/260424/

Monforts / Zimmer Coating Machine

Quantity: 1, Year: 2012, 4G/K-T-Coat-MK (Monforts stenter frame with Zimmer coating head), ww. 2000 mm, gas heated

AB55/240424/

Ferraro Open Width Compactor

Quantity: 1, Year 2010, Width: 2400, Type Comptex RE-2500, Model 180/24/10, Stretching field (pin stenter chain) 11 mts steamer, E&L spreaders & selvedge detectors, Steam heated, Exit with non-stop rolling and inspection.

AB55/240424/

Lafer Sueding & Emerizing

Quantity: 1, Year: 2015, Width: 3400 mm, Model: Ultrasoft-Y, 4 brushes, 1 emerizing roller, Exit with plaiter and batcher, very low working hours in brand new condition.

AB55/240424/

Monforts Stenter

Quantity: 1, Year: 2011, Type Montex 6500-GF Twin Air, Width 200 cm, 6 chambers, gas heating, pin and clip with horizontal chain
Mahlo weft straightener type Orthomat, Küsters Foulard type 222.52-1800, year 1992, with Maxon MF300 burners, exit with big batcher and plaiter.

AC93/200424/

Torres Shearing

Quantity: 1, Year: 1996, Roller Width 2200 mm, For towel, Model: AB-133, With: POL ROTOR.

AB60/200424/

Sucker Muller Sizing Machine

Quantity: 1, Year: 02/2003, Type WE11 working width 2800mm, 10 drying cylinders 1800mm of those 6 teflon coated + 1 spare cylinder, single size batch, creel for 16 warping cylinders, sold without sizing kitchen. 7713 working hours only.

AA10/190424/

Flainox Finishing Machines

Quantity: 2, Year: 2003-2004, mod. MULTIFINISH JUMBO J3C , 3 ropes.

AE02/190424/

Effedue Stenter

Quantity: 1, Year: 1999, Type Piana Flat 2000-L, ww. 1800 mm, 4 chambers, gas heated, vertical chain, for knitted and woven fabrics.

AD63/180424E/RYP-CI/F/AE/

Bruckner Stenter Frame

Quantity: 1, Year: 2016, Split Flow VN SFP 32/4, ww. 600 – 3200 mm, 4 chambers, vertical Star Dur chain, entry 3 meters, gas heated, Brückner Multi Control, Opti humidity control, Mahlo Orthopac weft straightener, Feyen foulard, less used – less working hours – top condition, Entry of fabric with J-box, MERROW cutting and sewing machine, Fabric stopping device for the sewing, Introduction frame to the padder with some passage cylinders, Fabric guiding device ERHARDT+LEIMER, model KF 2020, Impregnation padder FEYEN (KUESTERS), n.2 cylinders, one is floating, MAHLO weft straightener, with optical heads, model ORTHOPAC RVMC-126, BRUECKNER single layer stenter machine, Oven entry arms’ length: 3.000 mm. Number of chambers: 4, Heating system: gas, Maximum working temperature: 210 °C, Vertical chain. Pin chain, Maximum working speed: 40 meter/minute. Oven exit arms’ length: 3.500 mm, Cooling device. Delivery of fabric with plaiter and big roll. OPTI-HUMIDITY, (moisture/humidity check for the exhausted/waste air) with measuring probe. MULTICONTROL, work process control and visualization system. Exhaust-suction device for the expulsion of exhaust/waste fumes positioned above the oven. Machine needs n.5 containers 40’. Machine is suitable to work Fabric, blankets and moquetes.

AC44/160424/

MENZEL KKV-Foulard

Quantity: 1, 3200mm

AD63/160424/

Bruckner Sanforizing Line for Woven Fabrics

Quantity: 1, Year: 2005, Model: OS 18, Roller width: 2.000 mm, Working width: 1.800 mm, Entry with accumulator, WEKO – FLOW humidification unit, Cylinder for dragging fabrics with control, Steaming cylinder, MAHLO weft-straightener with optical heads, Equalizing unit with chain and clamps width 1.600 mm, Extractor cylinder, Shrinking unit with rubber ring, Device for grinding the rubber ring, Bar brake, Spreader roller at the entrance of the felt calender, Felt calender, diameter 2.500 mm, Felt drying drum diameter 1.200 mm, N. 3 cooling drums, diameter 640 mm each. Accumulator for fabrics at delivery, Contact winder for large rolls, Electrical cabinet, control by PLC, control elements and display of return values.

AB55/160424/BO/

Lafer Brushing

Quantity: 1, Year 2014, 3400 mm, 3 brush + 1 Emery roll inside the machine + 1 extra brush.

AD92/100424/

MCS Multiflow

Quantity: 2, Year: 2006, twins, 3 H.T. (600 kg), with big tank, automatised with Termoeletronica

AE56/120424/

Lafer Raising Machine

Quantity: 1, Year: 2011, Italy origin
240cm working width, double drum 24+24 rollers with new wire/pin,parts complete