Showing 151–200 of 261 results

Show sidebar

AA05/291124D/CO.L-R/C/BC/

NSC Schlumberger GN6 Blending

Quantity: 1, Year: 1990, With ET13, can delivery dia. 600×900 mm. Loaded in 1×20″ box container.

AA03/241124E/S.L-A.L/F/CF/

Seydel Stretch/Tearing Converter

Quantity: 1, Year: 1981, for tows until 200 g/m, acrylic, polyamid, polyester with 3 breaking zones,heating plates, continuously sliver steamer,
delivery in can diameter 700 mm

AA03/241124E/P.L-A.L/F/AN/

Seydel Stretch/Tearing Converter

Quantity: 1, Year: 1981, Type 682, delivery: 1 sliver in 1 can Ø 700 x 1000 mm,
continuous steaming device

AB45/251124/BY/

Suessen Ring Spinning Frame Linked with Murata 7/5 Winder

2x worsted ring spinning frame Sussen model Fiomax 2000
Year 1996/1997, With 528 spindles each, Ring dia 51, Gauge 75 mm, Tubes high 26 cm, Draft adjustable with inverter.
linked both with:
1x autoconer make Murata model 7-5
Year: 1997, With 40 heads.
Condition: Running

AA03/241124E/R.L-A/F/AN/

Gillbox NSC GNP/GN4

Quantity: 1, Year: 1970 , feeding: simple creel from can,delivery: 1 sliver, automatic baller

AA03/241124E/T.L-A.L/F/CF/

Gillbox NSC GN5

Quantity: 1, Year: 1974 , feeding: 10 slivers in cans,
delivery: 1 sliver in 1 can dia. 1000 x 1100 mm high

AA03/241124E/T-A.L/F/CF/

Gillbox NSC GN45

Quantity: 1, Year: 1966 , feeding: 8 slivers in cans,
delivery: 2 slivers in 2 cans diameter 600 x 1000 mm, good condition, still running, 380V/3 PH/ 50 HZ

AA03/250125E/CO-R/F/

Zinser 420-S Worsted Ring Frames

Quantity: 4, Year: 1990, 344 spindles, pitch 82,5mm, ring diameter 52mm, oiled rings, Double drafting system SKF PK1601, automatic doffer Covemat, Overhead cleaner, inverter, 380V3Ph/50HZ. Machines are in very good condition and still in production. Have run only 200days/year in 2 shifts, general overhauled in 2012.

AA03/241124E/O-A.L/F/AN/

NSC GN5 Gillbox Autoleveller Baller

Quantity: 1, Year: 1977 , Feeding: 10 slivers from ball and cans, Delivery: 1 ball, automatic doffer, 380V/3Ph/50Hz, Dismantled in sections.

AA03/241124E/O-A.L/F/CF/

NSC GN5 Gillbox Baller

Quantity: 1, Year: 1976, Feeding: 8 slivers in cans, Delivery: 1 ball, automatic doffer, 380V/3Ph/50Hz, Good condition.

AA03/241124E/CC.L-R/F/CF/

NSC GC12 Gillbox

Quantity: 1, Year: 1985, Feeding: 12 slivers in cans, Delivery: 4 slivers in 4 cans dia 500 x 1200mm high, Automatic can changer with 4 can press for higher quantity each can, 380V/3Ph/50HZ.

AA03/241124E/P-C/F/CF/

NSC GN5 Gillbox

Quantity: 1, Year: 1971, Feeding: 12 slivers from bobbins and cans, Delivery: 4 slivers in 2 cans diameter 400 x 900 mm, Good condition, still running, 380V/3 PH/ 50 HZ.

AA03/241124E/P-C/F/CF/

NSC GN5 Gillbox

Quantity: 1, Year: 1977, Feeding: 12 slivers from bobbins and cans, Delivery: 1 sliver in 1 can diameter 600 x 1200 mm, Good condition, still running, 380V/3 PH/ 50 HZ.

AA03/241124E/P.L-C/F/CF/

NSC GN5 Gillbox Autoleveller

Quantity: 1, Year: 1971, Feeding: 12 slivers in cans, Delivery: 1 sliver in 1 can diameter 600 x 1000 mm, Sliver oiling device, Good condition, still running, 380V/3 PH/ 50 HZ.

AA03/241124E/L.L-A/F/CF/

NSC Gillbox GN4

Quantity: 1, Year: 1968, Feeding: 10 cans, Delivery: 1 sliver in 1 ball, Maual baller, 380V/3Ph/50H, Good condition, still working

AB52/191124E/LR-L/C/

Seydel Converter 911

Quantity: 1, Year: 2000, Delivery can dia. 1000 x 1200 mm.This machine is good for Tow to Tops of Polyester

AA10/301023E/LC-Y/F/

Sant Andrea Finisher RF2B

Quantity: 1, Year:1987, 20 bobines, Tube lenght 330 mm.

AA10/131124E/YS.L-Y.L/M/

GAUDINO Woolen Ringspinning Frame

Quantity: 1, Year: 1974, mod.FST, 480 spindles (240×2), ring dia.75 mm., gauge 105 mm., tube 350 mm.

AA10/131124E/RR-R/M/

GAUDINO Woollen Ringspinning Frame

Quantity: 4, Year: 1974/1973, mod.FST
of which:(2) 224 spindles.(1) 208 spindles.(1) 210 spindles.All with ring dia.90 mm., tube 400 mm. about.

AE11/121124/

Zinser 319 L Ring Spinning

Quantity: 6, Year: 1986, 540 spindles; Gauge 82,5mm; Ring ø 55mm; Tube 280mm; Lycra device; Spindle knee brake; Doffer automatic; Voltage 380.3.50; Inverter.

AE11/121124/

Zinser 421 E Ring Spinning

Quantity: 2, Year: 1991, 540 spindles, Gauge 82,5mm, Ring ø 52mm; Tube 250mm; Spindle knee brake; Doffer automatic; Voltage 380.3.50; With Inverter.

AE11/121124/

Zinser 420 Ring Spinning

Quantity: 2, Year: 1989, 584 spindles, Gauge 75mm, Ring ø 48mm; Tube 250mm; Spindle knee brake; Doffer automatic; Voltage 380.3.50; Inverter.

AE11/121124/

Zinser 319 SL Ring Spinning

Quantity: 1, Year: 1983, 344 spindles, Amsler STG 3000 slub device; Gauge 82,5mm; Ring ø 54mm; Tube 265mm; Doffer automatic; Voltage 380.3.50; Inverter.

AC29/101124/AS/

Complete Spinning & Weaving Plant

Complete plant for production yarn to fabric.

Including:
Preparation machines (Gaudino Ring, NSC GC13, GC15, GC30, GN5,..)
Ring spinning machines (Zinser 421, 319,..)
Combing machines (NSC PB31,..)
Finisher machines (NSC FMV 32, FMV 36,..)
Autoconer machines (Savio, Schlafhorst 338,..)
Twisting machines(Volkmann VTS08, Saurer Allma,..)
Fabric weaving machines (around 65 Picanol looms & Karl Mayer, Hacoba,.. Warpers)
Dyeing machines (MCS, Thies, Brazzoli, Loris Bellini,..)
Fabric finishing machines (Monforts, Krantz, Cimi,..)

Please download EXCEL file to see complete list of machines and spare parts with year of make, capacity and other details.

AE73/291024D/LS-AI/F/BY/

Gill box Sant Andrea RST-21 and ST-21

1)gill box Sant Andrea ST-21, 1 x 1, autoleveller, 700 x 1200, Year: 2000
2)gill box Sant Andrea ST-21, 2 x 1, 700 x 1200, Year: 2000
3)gill box Sant Andrea RST-21, 1 x 1, 700 x 1200, Year: 2000

AA05/161024E/SR.L-AI/C/

NSC Schlumberger Rebreaker

Quantity: 1, Year: 1997, mod. GC15-R5
creel 10 x 2 cans, 5 breaking zones, electronic autoleveller, delivery on Gualchierani automatic press
Delivery: November
Bales possible can be 400 or 800 mm. At the present, are working 400 mm.

AC29/161024/

Spinning Frame Cognetex Idea 73L

Quantity: 2, Year: 2002, 50 mm ring, 768 spindles, With Autodoffig, 75 gauge, Only one machine has Autodoffing

AA98/211024E/RCI-RI/F/AY/

Complete Plant for Production of Synthetic and Acrylic Yarns for Carpets or Blankets

1x Bonino Biella Italy Carding:
Year: 1987, ww: 2800 mm. , silo feeder, fibers weight device, pre-avantren, roll conveyor, first drum with 2 workers and strippers, second drum with 6 workers and strippers, double doffer, delivery 2 tapers on after carding gill box LAWER, can 1000×1200 mm. with autodoffing.

1x Bonino Biella Italy Carding:
Year: 1987, ww: 2800 mm. , silo feeder, fibers weight device, pre-avantren, roll conveyor, first drum with 5 workers and strippers, second drum with 6 workers and strippers, double doffer, delivery 6 tapers on cans 1000×1200 mm. with autodoffing.

1x Gill Box NSC GC13:
Year: 1988, Autoleveller, combs head with chain drive, feeding creel 10 positions by cans, delivery 1 sliver in 1 can 620 x 1150 mm.

1x Gill Box NSC GC13:
Year: 1988, combs head with chain drive, feeding creel 10 positions by cans, delivery 2 slivers in 2 cans 620 x 1150 mm.

1x Gill Box NSC GN6:
Year: 1985, combs head with screw drive, feeding creel 12 positions by cans, delivery 4 slivers in 2 cans 620 x 1150 mm.

1x Semi Worsted Ring Spinning Frame NSC SCHLUMBERGER CF 29:
Year: 1985, with 130 spindles, ring diam. 120 mm. , tube H.600 mm. , single drive, single frame, Hight draft pendulum arms (composed by 1 feeder top cots roller, 1 middle cots roller, 3 elastic cots rollers besh with down apron, 1 release top cots roller), feeding by cans.

Big stock of cans and spindles plastic tubes included.
Machines are in production.
Machines complete in very good running condition.
Line is for Carpet Yarn, Blanket Yarn, and similar yarns.

NOTE: The company had a small production of blankets and carpets, but they had preferred to buy and use two cards to avoid wasting time cleaning between one batch and another.
Certainly the production capacity of the 2 carde is much higher.
Therefore purchaser can add spinning machines separately to increase the production.

NOTE: Split sale is not possible, its for sale as a line, ONLY one carding machine (any of the 2) can be sold separatley.

AB52/101024/

Seydel Breaker 870

Quantity: 1, Year: 1997, Heating plate, continuous steaming, automatic delivery 1000 x 1200.

AB52/101024/

NSC Rebreaker R5 – GC15

Quantity: 1, Year: 1997, Creel 10 x 2 cans, 5 breaking zones, GC15 head with electronic autoleveller, Delivery on automatic Gualchieranni press.

AA03/211024E/AO.L-T/F/AC/

NSC CF32D Worsted and Semi Worsted Ring Frames

Quantity: 2, Year 1986, Double sided 2 x 208 = 416 spindles with spin finger for spinning processes. With low yarn tension and high spindle speed. Pitch 105mm, ring diameter 75mm, tubes 350mm, double apron drafting system NSC. Still complete on floor, good condition, machines have run only few years.

AB45/071024E/TA-T/F/BY/

ZINSER 351 LINKED SCHLAFHORST 338

ZINSER RINGFRAME TYPE 351
YEAR 2008, 864 SPINDLES, RING 42 MM, GAUGE 75 MM, TUBE LENGTH 230 MM, BLOWER, LINKED WITH
SCHLAFHORST 338
YEAR 2008, 18 SPINDLES, CLEARER USTER QUANTUM F23 for foreing fibers
WAXER, SPLICER, SOHLER OVERHEAD CLEANER, 380 V 50 HZ
Condition: Running

AB52/300924E/YL-AI/C/

GC12 NSC Gillbox

Quantity: 2 , Year: 1984/1986, Autoleveller, creel 8 cans
Linked to a St Eloi press, bumps at the delivery, diameter 400 mm, automatic knotting
All the machines were running properly.
The machines are dismantled by our technicians, so professional work
Please find enclosed a video of the machine running.

AA03/230924E/AA-C/F/

NSC FM5-N Horizontal Finisher

Quantity: 1, Year: 1980, 8 heads = 16 slivers on 10 bobbins length 240 mm, dia. 70 mm, 380V/3Ph/50Hz.

AA03/230924E/AT-C/F/

NSC Vertical Finisher FMV10

Quantity: 1, Year: 1980, Type FMV10 , 16 heads, each 2 slivers on 16 tubes length 300 mm, dia 70mm, 380V/3Ph/50Hz.

AA05/190924/AT/

Zinser 350 & 351 Ring Frames

Quantity: 5
2 x Zinser ringframes working short staple mod. 350, year 2001, 972 spindles each, ring dia. 51 mm., with Amsler device
3 x Zinser ringframes working short staple mod. 351, year 2004, 972 spindles each, ring dia. 56 mm., with Amsler device

AA10/180924E/AAC-AI/F/

NSC Gill Box GC14

Quantity: 1, Year: 1994, with autoleveller, feeding creel 6 cans (3+3)
Linked to 1 ST.ELOI Press year 1993, for bumps dia. 400 mm, automatic knotting and ejection

AA10/120924E/YL-L/M/

HDB Spinning Frame

Quantity: 1, Year: 1986, Type CBY 2, 192 spindles, Ring dia. 127 mm, Tube height: 600 mm.

AF20/030924E/CRL-AI/F/BQ/

NSC GC15 Spinning Set

YEAR: 1999
1x GC-15 ELECTRONIC AUTOLEVELLER FEEDING 12 CANS/ BALLS AND DELIVERY 1 SLIVER 1 CAN 700 X 1200.
1x GC-15 FEEDING 8 ENDS, DELIVERY 2 SLIVERS 2 CANS 700 X 1200.
1x GC-15 FEEDING 16 ENDS, DELIVERY 4 SLIVERS 2 CANS 700 X1200.
ELECTRIC-380 50 HZ

AA03/280824E/SC-O/M/

Gaudino Ring Spinning Frames

Quantity: 2, Year: 1990, 144 spindles, Pitch 165mm, Ring dia 127mm, Tubes 500 mm, With automatic cops doffer, condensor bobbin elevator, condensor bobbin transport system, automatic joining/connection of ends.

linked with: 1x Murata Winder
14 spindles 8″, tubes 3°30, length 230mm, splicer, Loepfe clearer TK 680, doffer, 380V/3Ph/50HZ
Still running, in good condition

AB46/260824/AR/

Suessen Fiomax 2000 Spinning Frames

Quantity: 6, Year: 1998, 960 spindles, 75 mm gauge, 52 mm ring, 10 ¼” tube, Pinter roving stop, linked w/Savio Espero winder, 48 spindles, cone, air splice, Loepfe TK 840 Yarn Master clearers, wax, Electrojet OH cleaner.

AB46/260824/AR/

Suessen Fiomax BE -2 Spinning Frames

Quantity: 2, Year: 2000, 480 spindles, 75 mm gauge, 52 mm ring, 10 ¼” tube, Fani roving stop, linked w/Savio Espero winder, 28 spindles, cone, air splice, Loepfe TK 840 Yarn Master clearers, wax, Electrojet OH cleaner.

AH68/220824/

SANT ANDREA FINISHER/RUBBING FRAME

QUANTITY: 1, YEAR: 1996, MODEL RF 2 / b, 24 BOBBINS

AB46/210824/AR/

Cognetex FTCL Spinning Frames

Quantity: 6, Year: 1995, 928 spindles, 75 mm gauge, 55 mm ring, 11” tube, Pinter roving stop.
linked w/Savio Espero winder, 44 spindles, cone, air splice, Loepfe TK 750 clearers, wax, Electrojet OH cleaner.

AB46/160824/AR/

Cognetex SMC 420 11 V Breakers

Quantity: 4, Year: 1997, 48” x 46”, 20 end creel.

AB46/160824/AR/

Cognetex SCE 11 VA Finishers

Quantity: 6, Year: 1998, Autolevelor, 32” x 48”, 6 end creel.

AH68/060824E/LT-Y/M/BY/

SCHLUMBERGER HORIZONTAL RUBBING FRAME

QUANTITY: 1, YEAR: 1996, TYPE: FM 8 N, 20 SPINDLES, MANUAL DOFFING, PITCH 355 mm
2 ROVINGS per BOBBIN, INPUT 12 to 15 ktex according to material, ROIVING WEIGHT 0,66 – 5,5 Nm
DRAFT 9 to 26 by GEAR BOX, NSC DOUBLE APRON DRAFTING, DRAFT APRON 145 mm wide
RUBBING SPEED 1200 cycles / minute, NUMBER RUBS 5 to 8 per meter, BOBBIN 300 mm, DELIVERY SPEED up to 220 meters / minute
FITTET with :
NEW DRAFTING APRONS, NEW RUBBING APRONS, NEW FRONT AIR VALVES, NEW SLIVER GUIDES, NEW BARREL HOLDERS, loaded in 1 x 40` CONTAINER

AH68/060824E/LT-Y/M/BY/

SCHLUMBERGER HORZONTAL RUBBING FRAME

QUANTITY: 1, YEAR: 1997, TYPE FM 8 N , 20 SPINDLES, MANUAL DOFFING
INPUT 12 to 15 ktex according to the material, ROVING WEIGHT 0,66 – 5.5 Nm, DRAFT 9 to 26 by GEAR BOX
NSC DOUBLE APRON DRAFTING, DRAFT APRON 145 mm wide, RUBBING SPEED 1200 cycles / minute
NUMBER RUBS 5 to 8 per meter, BOBBIN 300 mm
DELIVERY SPEED up to 220 meters / minute FITTED with .
NEW DRAFTING APRONS, NEW RUBBING APRONS, NEW FRONT AIR VALVES, NEW SLIVER GUIDES, NEW BARREL HOLDERS
INCLUDING :1500 ROVVING BARRELS
loaded in 1 x 40` Container.in a warehouse.

AB65/020824/

ZINZER Ring Frames

Quantity: 6, Year: 2001-2004, Mod RM-450 (2) RM-451 (4), 1008 Spindles
Ring diam. 54 mm, Gauge 82,5 mm, Tube 260 mm, SKF PK-1601

AB09/290724/

Schlumberger D3/GC30 Rebreaker & GC15 Gill Boxes

1 x Rebreaker Schlumberger D3/GC30, year 2008 , with 3 cylinders , feeding 2×8 slivers, delivery 1 sliver 1 can ,can size 1000×1200 mm.
1.passage gill box Schlumberger GC15, year 1998 feeding 2×4 slivers, delivery 1 sliver 1 can can size 1000×1200 mm.
2.passage gill box Schlumberger GC15 year 1998 autoleveller , feeding 4×2 slivers , delivery 1 sliver 1 can can size 1000×1200 mm.
2 x 3.passage gill box Schlumberger GC15, year 1998 feeding 4×2 slivers , delivery 2 slivers in 2 cans can size 700×1000.
Machines are in good condition.

AB09/290724E/SC-O/M/

Rebreaker

AB09/180124E/CIR-AA/M/

GC15 with 4 passages