AA10/230925/
NSC GN5 Worsted set
Composed of:
1st Gill box, feeding 12 bobbins/cans, delivery 1 can 700×1000 mm, 1 sliver, manual
2nd Gill box, autoleveller, feeding 10 cans, delivery 1 can 700 x1000 mm, 1 sliver, manual change
3rd Gill box mod.GN5, feeding 10 cans, delivery 1 can 700 x1000 mm, 2 slivers, manual change
AI72/200925/
NSC Finisher FMV32
Quantity: 2
AI72/200925D/LO-AC/F/CM/
FMV32
Quantity: 1, Year: 1995, 24 Spindles, Auto Doffing
AI72/200925D/RP-AI/F/CM/
FMV32
Quantity: 1, Year: 1989, 20 Spindles, Auto Doffing
AA10/190925/
Cognetex FTG-7L Ring Spinning
Quantity: 5, Year: 1990, mod. FTG-7L, 672 spindles, Gauge 75 mm, Ring dia. 51 mm, tube 260 mm, Draft SKF for short fibers, autodoffer. Blower.
AA02/180925/
Saurer Zinser 351 Ring Spinning Frames
Quantity: 16
1x Year: 2004, 972 spindles:
82.5 mm spindle gauge, 260mm tube length, 56 mm ring diameter, Auto Doffing to Discharge box, With Amsler STG4000 slubbing, Sohler overhead travelling blower.
6x Year: 2016 (4), 2017 (1), 1680 spindles:
75 mm spindle gauge, 210mm tube length, 48 mm ring diameter, Auto Doffing to Discharge box, Electrojet overhead travelling blower.
2x Year: 2016, 1680 spindles:
Pinter Lycra attachments, 75 mm spindle gauge, 210mm tube length, 48 mm ring diameter, Auto Doffing to Discharge box, Electrojet overhead travelling blower.
3x Year: 2010 (2) / 2007 (1), 1056 spindles:
75 mm spindle gauge, 45 mm ring diameter, 230mm tube length, Pinter Lycra attachments, Texparts overarms, Auto Doffing to doff box.
4x Year: 2004, 972 spindles:
82.5 mm spindle gauge, 56mm ring diameter, 260mm tube length, Pinter Lycra attachments, Texparts overarms, Auto Doffing to doff box.
AA05/160925/AU/
Sant’Andrea line
Year: 2007
Vertical finisher Sant’Andrea RF5A
Quantity: 2, 16 spindles each,
Draw frame Sant’Andrea CSNS
Quantity: 3, autoleveller, feeding: 1 can – 1 sliver, drawing: 1 sliver into 1 can
Draw frame Sant’Andrea CSNS
Quantity: 1, feeding: 1 can – 1 sliver, drawing: 2 slivers into 1 can
Draw frame Sant’Andrea HC24
Quantity: 1, feeding: 1 can – 2 slivers , drawing: 2 cans into 4 slivers, Can sizes: dia 800, height 1000
Totally: 7 machines
In January 2025 machines have been fully restored and spare parts changed.
Was made on draw frames:
– everyday cleaning – replaced all combs- replaced all gears of heads
– changed the drive of can spinning – repaired pneumatic system
Was made on roving frames: – replacement of all technical accessories
– repaired all heads- repaired pneumatic system and system of valves
AA03/150925/BY/
Cognetex Gillbox Line
Year: 1984-1985
Consisting of:
1. passage with additional drafting zone for feeding and blending 20 sliver, delivery 1 sliver in 1 can dia 700×1.000mm.
2. passage autoleveller, delivery 1 sliver in 1 can dia 700×1.000mm.
3. passage with bi-coiler, 2 sliver in 1 can dia 700×1.000mm.
380V/3Ph/50Hz.
AA05/160925/
Zinser 450 Ring Spinning
Quantity: 5, Year: 2004, Tube length: 240 MM, Ring dia: 48 MM, Number of spindles: 816, SKF PK 6000 air pressure, Drawing range: 8-89, Twisting from 180 to 1964 twist per meter, Yarn range: 32/l – 60/l, Machines are in excellent working conditions. Right now working on the Mill.
In January 2025 Machines have been fully restored and spare parts changed. Was Made: replaced all frequency converters, replaced all gears and shafts, replaced arms, replaced driving belts, grinding and replacing of arm rollers, reparing of gearboxes. Its for Worsted and now working Wool.
AB45/110925E/RR-R/F/AK/
NSC Schlumberger Gill Box Drawing Frame GC15
Quantity: 1, Year: 1996, feeding creel 10 coupling ( 5 X 2 ) by cans or bobbins ,, delivery 1 sliver / 1 can 800 x 1200 with automatic doffing, Condition: Running
AB52/050925/
Zinser 450 Ring Spinning
Quantity: 5, Year: 2001, Type : RM 450, Ring Diameter : 50 mm; Gauge : 82,5 mm, Number of spindles : 828; N°: 22 908 …. Year : 2001.
Including : Autodoffing; Type : COWEMAT 395 F; Equipped with SIRO-SPUN (CORE SPUN ELASTIC LYCRA) for creel and drawing system ; Automation programming system; MAGITEX Blowers.
AC32/010925/BC/
Zinser Ring Frame (12,848 spindle)
Quantity: 26 , Year: 1995/1996, 520 spindle, Type: 421E, Auto doffer
AG41/280825E/AAL-AI/M/BT/
Schlumberger GC40 Autoleveller
Quantity: 1, Year: RE2021, Middle Stage, Area Needed(m): 10.5L*4.5W, Average production: 8000Kg, Feeding: 8 feeder, Output: 1 Can, 120Cm*70cm. Machines are in production, in perfect condition.
Chain gill model GC40 type 1627 RE Feeding by a table top can creel for 1 x 8 single end cans Ø 700 x 1200 mm with
detour bars Delivery into 1 single end can Ø 700 x 1200 mm with automatic doffing Electronic autoleveller. Pinning: 5
flat pins per cm n°16/22 – penetration 1/1. Machine dedicated for PAN, and all similar materials to wool length fibers
Machine foreseen to be placed in 2 n d passage of preparation to spinning. Machine foreseen for connection to 380
Volts – 50 Hz electrical supply. Machines foreseen for electrical distribution system N°2: TN-C (cf. drawings TGS
00601).
GALVANISED TOP PLATE, 3OOMM KICKING BAND , SET OF 3 NOS. CASTOR
WHEELS.
AF45/220825E/AO-C/F/
HAMEL Ringtwister Type 2/054
Quantity: 1, Year : 2000, Machine with:
– 60 Stopspindels- spindelgauge 288 mm- Ring Ø 145 mm- Ooutput flanged Bobbins- Regelmotor 380V / 50 Hz- Creel 2-fold over the machine
AA05/230525/AT/
Complete Spinning Line
6x Gaudino Worsted Ring Frames mod. FP99/260/LA, year 2000, 640 spindles each, ring dia 48 mm., gauge 75 mm., tube height 260 mm., P6000 drafting, autodoffing, blower.
1x Gaudino more, same characteristics, with Pinter corespun device for lycra.
1x Schlafhorst Autoconer mod. X5, year 2011, 60 positions, 40 bobbin to cone and 20 cone to cone, magazine type, thermosplicer, Uster Quantum 3 clearers, exit 6″, conicity 4°20′, power 440V/60Hz.
1x Rite doubling mc mod. AGR, year 1998, 80 heads (2 x 40 heads per side), 3 ends couples, manual doffing, individual count meter, Electro Jet blower
2x Volkmann 2×1 Twisting mcs mod. VTS08, year 1997, 192 positions each, pot dia. 170 mm., exit 6″, conicity 4°20′, automatic discharge, Magitex blower.
AB09/230825E/AYI-AI/F/
NSC Schlumberger Gill Boxes
1.passage gill box Schlumberger GC15, year 1997 feeding 2 x 4 slivers, delivery 1 sliver 1 can can size 1000 x 1200 mm
2.passage gill box Schlumberger GC15 year 1997 , autoleveller ,feeding 4 x 2 slivers , delivery 1 sliver 1 can can size 1000 x 1200 mm
3.passage gill box Schlumberger GC15 year 1997 feeding 4 x 2 slivers ,delivery 2 slivers in 2 cans can size 700 x 1200 mm
Machines are ready for loading
AI65/190825D/ARC-AC/M/AS/
NSC Finisher FMV 32
Quantity: 1, Year: 1996, 24 spindles, Machine is in good working condition.
AA05/071224D/OT.L-O/F/CL/
Cognetex FTC7L Ring Frames
Quantity: 2, Year: 1994, 1024 spindles each, Ring dia. 51 mm., gauge 75 mm., tube height 260 mm., drafting PK1601, blower. Loaded in 4 x 40″ box containers.These machines have been LINKED to autoconers before but now autoconers are sold.
AE17/160825D/AO-Y/M/AS/
NSC GC13 Chain Gill
Quantity: 1, Year:1990 , 8 input 1 output , output can size 80×120
AB45/120825E/CS-Y/F/BY/
Zinser Simplex
Quantity: 1, Year: 2005, model FL668 , Nos spindles 120, Manual doffing , Draft type PK 1500-0962-604
Cradle size : OH 514-0962746, Bobbin length 450 mm, Electrojet Blower , 380 V 50 Hz , Condition: Running
AA05/090825/
Complete Line
AA05/280725D/TL-L/C/
BL GC15
AA05/280725D/TL-L/C/
First passage GC15 with AL
AA05/280725D/TL-L/C/
Second Passage GC15 with 2 in 2
AA05/280725D/TL-L/C/
Third Passage GV20 2 in 2
AA05/280725D/OI-L/C/
Fourth Passage GV20 4 in 2
AA05/280725D/PL-L/C/
Roving RF2B
All the machines will be in very good condition!
AG41/040825E/S-A/M/BT/
Continua N.5 Spinning Machine
Quantity: 1, Made in Spain, Year: 1980, 416 Spindles, Ring Dia. 60, Spindle centre 60, Area Needed(m): 21L*1.5W +1.5M W Each side, Average production: 500Kg 2Nm-35Nm. Machines are in production, in perfect condition.
AG41/040825E/CY-C/M/BT/
Schlumberger BM14
Quantity: 1, Year: 1987, Low Twist, Area Needed(m): 15L*7W, Average production: 3200Kg, 64 spindles, Output: single, Gauge: 140mm. Machines are in production, in perfect condition.
AD81/290725/
NSC GC12 Gillbox
Quantity: 1, Year: 1985, Model GC12, Type Gillbox with automatic can changer
Feeding system 12 slivers in cans, Delivery system 4 slivers into 4 cans (Ø 500 x 1200 mm high)
Additional features Automatic can changer with 4 can press units, Voltage 380V
Frequency / Phases 50 Hz / 3 phases
a high-output fiber drafting machine designed for efficient sliver processing and alignment.
This model feeds 12 slivers from cans and delivers 4 well-parallelized slivers into 4 large output cans (Ø 500 x 1200 mm). Equipped with an automatic can changer and 4 can press units, it ensures continuous operation and higher capacity per can. Ideal for large-scale fiber preparation in spinning or nonwoven lines.
AE51/260725/
Various Breaker, Twisting, Finisher,..
1x SCHLUMBERGER – model CF32S – Year: 1989 / EN 1808 / GUEBWILLER FRANCE
10x Twisting – YANTRA – produced by Saurer license / ALMA
1x SEYDEL 682 – Year: 1984
1x SEYDEL 761 – Year: 1982
1x Rebreaker NSC R5L10 – Year: 1988
1x NSC Gill Box GC13 – Year: 1988
1x SEYDEL 677
AB52/180725E/SP-P/F/
NSC GC15 Rebreaker R5A
Quantity: 1, Year: 1998, Elettronic Autoleveller link St Elois press for bumps diameter 600 mm.
AF74/230725/
Rieter Compact Ring Spinning Line with 45.696 Spindles
2 x Rieter complete blowrooms, year 2011
24 x Rieter C60 cards, year 2011
4 x Rieter C70 cards, year 2017
4 x Rieter SB-D45 breakers, year 2011
9 x Rieter RSB-D45 finishers, year 2011
1 x Rieter E26 Servolab automatic lab transportation, year 2011
3 x Rieter E35 Unilap lab formers, year 2011
1 x Rieter E36 Unilap lab former, year 2017
18 x Rieter E76 combers, year 2011
2 x Rieter E86 combers, year 2017
7 x Marzoli FTS-DN roving frames, year 2011, 192 spindles each
14 x UTIT roving transportation system, year 2011-2014
21 x Rieter K45 ComforSpin compact ring spinning frames, year 2011, 1632spindles each, ring diam. 38mm, gauge 70mm, tubes 190mm
7 x Rieter K46 ComforSpin compact ring spinning frames, year 2014, 1632spindles each, ring diam. 38mm, gauge 70mm, tubes 190mm
Linked to winders:
21 x Savio Polar I-DLS link winders, years 2011, 42 spindles each, UT3 clearing system**
7 x Savio Polar I-DLS link winders, years 2014, 42 spindles each, UT3 clearing system*
AB09/150725E/YY-T/M/AS/
Schlumberger Gill Box GC15
Quantity: 1, Year: 1998, Feeding creel for bobin 8 cans slivers or bobins feeding , delivery bobin, Good condition.
Machine is without autoleveller , With oiling device , Bobin weight 11 kg, 6 combs, Auto doffing
AI08/140725/BA/
Gill box Schlumberger GC14
1.passage 0 gill box Schlumberger GC14, year 1993, feeding 24 bobbins, delivery 1 sliver 1 can size 700×1000 mm.
2.passage 1 gill box Schlumberger GC14 with autoleveller, year 1993 feeding 2×4 slivers, delivery 1 sliver 1 can can size 700×1000 mm.
3.passage 2 gill box Schlumberger GC14 year 1993, feeding 4×2 slivers , delivery 2 sliver 2 can can size 700×1000 mm.
4.passage 3 gill box Schlumberger GC14, year 1993 feeding 4×2 slivers , delivery 4 slivers in 2 cans can size 700×1000.
Machines are in running condition.
AA26/140725/
Gaudino FP99 260 LA Worsted Ring Spinning
QUANTITY: 1, WITH PINTER CAIPO DEVICE, YEAR: 2018, ELASTIC CORE SPUN MOTORIZED, MODEL FP99 260 LA, 640 SPINDLES, RING DIAM 48 MM, GAUGE 75, AUTODOFFING, BLOWER, TUBE HEIGHT 26 CM
AI08/140725/BA/
Zinser 450 Ring Spinning
Quantity: 11, Year: 1999, Tube length: 250 MM, Ring dia: 50 MM, Number of spindles: 504, guage:82.5mm; SKF PK 6000 air pressure, Drawing range: 8-89, Twisting from 180 to 1964 twist per meter, Yarn range: 24/l – 60/l, with autodoff; Machines are in excellent working conditions. Right now working on the Mill.
AE21/070725/
NSC Schlumberger GN6 Gill
Quantity: 1, Year: 1973, Double head, manual doffing, 2 cans, 1 sliver/can, Feeding 2×10 cans, With inverter, The colour it is Grey, not Green, because we painted it 4 years ago.
AI08/070725D/AAC.PLI-AI/F/BA/
NSC Schlumberger GV20
Quantity: 1, Year: 2007, 4 slivers in 2 cans. Can Size. Dia 700*1000
AC32/060725/BC/
12 Combing Machine PB30-PB31-PB32
3x NSC PB30 COMBER LF SERIE 138 FRANCE 1991
2x NSC PB31 COMBER LF SERIE 178LF FRANCE 1995
2x NSC PB31 COMBER LF SERIE 178LF FRANCE 1994
3x NSC PB31 COMBER LF SERIE 178LF FRANCE 1993
2x NSC PB32 COMBER LF SERIE 182LF FRANCE 1996
Stopped on mill floor
3 machines require 1×40′ for shipment
AD65/300625E/PC-O/F/AS/
NSC GC15 Gill Boxes
Quantity: 1, Year: 1996, middle passage, 2 sliver into 2 can ( 1 sliver per can ), 4 x 2 creel, Auto can changer, 700 x 1200, 27 cm wide head.
Quantity: 1, Year: 1996, last passage, 4 sliver into 2 can ( 2 sliver per can ), 5 x 2 creel, Auto can changer, 700 x 1200, 27 cm wide head.
Macs are European origin. CE standards.
Power: 380 volt / 50 herz.
Erected and Dismantled in warehouse.
Machine is complete and nothing needed for erecting and running, and production.
Condition on a scale of 1 to 10, is 8.5 out of 10 which is very good for a GC15.
Machine has CE Certifications
Tech manuals would be supplied withe the machine
AA08/160625/BQ/
GAUDINO Semi-Worsted Spinning Machine
Quantity: 1, Year: 1986, Mod.FPK450/8C/LA, 216 spindles-ring diam.90 mm-gauge 120 mm, spin head-8 cylinders, tube H.450 mm, automatic doffing-Volt 380/3 – 50/60 Hz
AA10/180625E/LS-Y/C/
NSC Mixing Gill Box
Quantity: 1, Year: 1999, 2 Screw heads GN6 + 1 reducing head GC15, Feeding 12×2=24 cans/bobbins, delivery 1 bobbin, autom. change.
AA10/170625/
Cognetex Worsted Ring Spinning IDEA 83L
Quantity: 2, Year: 1998-2000, mod. IDEA 83L, 624 spindles each, Ring dia 60 mm, Gauge 82,5 mm, Autodoffing, Magitex blower, SKF draft.
AA03/110625E/TA-L/M/AN/
NSC Worsted/Semi worsted Ringspinning Frame
Quantity: 1, Year: 1990, NSC type CF43, General overhauled in 2019, 204 spindles, pitch 120mm, Ring dia 89mm, tubes 400mm, Nm 2-16, Double drafting zone NSC, automatic cops doffer, Feeding from cans, variable speed by inverter.
Linked with:
Karl Mayer winder type RC10 AWD/VD, Year: 1990, 12 spindles, traverse 10”, tubes 280mm, 1°50 for cones until 4 kg, Splicer, electronic clearer Loepfe TK680, meter counter, doffer, 380V/3Ph/50Hz.
Good condition, Still running in factory.
AA10/040625/
ZINSER Worsted Spinning Frame First Class Condition
Quantity: 1, Year: 1997, Type RM 450, 384 spindles, Ring diameter 50 mm, pitch 75 mm, Drafting SKF PK6000, Tubes 260 mm, equipped for Lycra
AA03/061224E/AA-C/F/CF/
NSC GN6 Gillbox
Quantity: 1, Year: 1981, Feeding: 12 bobbins, alternative cans + 4 bobbins, RMC-drawing device for 4 bobbins, oiling device , Delivery: 1 sliver in 1 can dia. 1000 x 1200 mm, Automatic can changer.
AA94/280525E/AIC-O/F/AO/
HOUGET DUESBERG BOSSON RING SPINNING FRAMES
Quantity: 2 , Year: 1991, Type : CBP5.114
200 spindles, rings Ø 90 mm, pitch 120 mm, tubes 400 mm, 380 V, cop lifter, pneum. threading. Machines are woollen system.
Requires 1×40 Ctr for each machine
AA10/210525E/OS-Y/M/BY/
Tematex Breaker MST10
Quantity: 1, Fully refurbished 2020 with new electric panel. 1 can 1000×1200 mm. Complete of Steamer SVZ, 1 set of gears, Upper Creel and structure, accessories. Machine stopped and dismantled.
AA94/160525E/TT-T/F/
HOUGET DUESBERG BOSSON RING SPINNING FRAME
Quantity: 1, Year: 1983, Type CBY².116
single side, 110 spindles, ring Ø 160 x 25,4 mm, pitch 200 mm, tubes 600 mm, cop lifter, motor 380 V, 56,5 Kw.