AE30/230924D/PR-O/F/
Rieter Open End
Quantity: 8, Year: 2010, MODEL: R40, 360 ROTORS, 2 piecers, 33mm rotor, B174 combing roll , Rieter yarn clearer, 380V 50HZ
AC86/230924E/CA-R/F/
Fadis Sincro T410 Winding
YEAR: 2013, NUMBER 24 POSITIONS, COMPUTER CONTROL , SENSOR YARN , BOBIN FINAL 180-230-290mm NOW UTILIZED FOR 230mm , HIGH QUALITY
AA05/190924E/ALL.L-AC/F/BY/
Thibeau Worsted Wool Card CA6
Quantity: 1, Year: 1992, renewed by Thibeau year 2009, ww 2500m. Worked very few, Card will be delivered with new wires and new bearing, 4 are the needing containers.
AA10/190924/
Trutzschler Preparation and Carding Unit
1x Bale Plucker Type BDT 019/1720, year 1992
1x Condenser Type LVSA, year 1992
1x Opener AXILOW Type AFC, year 1992
1x Separator Type ASTA 800, year 1992
1x Multi-Mixer Type MM 6/1200, year 1992
1x Opener Type CVT 3 1200, year 1992
1x DUSTEX Type DX, year 1992
1x Card Type DK 803, year 1998, output can KH 950/1000, year 1996
1x Card Type DK 803, year 1998, Output can KH 950/1000, year 1998
AA02/200924D/COS-AY/F/
Trutzschler Blending System
1x Truetzschler Mixing System with Electronic Weighing
Consisting of:
1 Weighing Feeder, Type BL-HW 1600, With blown Fiber through Air Separator and
1 Precision Weighing Feeder,Type BL-EW 1600
With blown Fiber through Air Separator and
1 Card Room Waste Feeder, Type BO-R with manual feed table 4 meter long and
1 Fine Opener, Type BL-FC 1200, Year of Manufacture 2008.
1x Truetzschler Multi Cell Mixing Chamber
Type MX-1, 10 cells, 1600 mm working width, Year of Manufacture 2008.
Feeding into:
1x Truetzschler Tuft Opener
Type TO-T1, 1600 mm working width, Year of Manufacture 2008.
1x Truetzschler Feeding Hopper
Type FD-S, With Opener,Type FD-U, With Condenser Feed, Type BR-CO1, Working width 1200mm.
1x Truetzschler Multi Cell Mixing Chamber
Type MX-1, Type MX-1, 10 cells, 1600 mm working width, Year of Manufacture 2007.
Feeding into:
1x Truetzschler Cleaner
Type CL-C4, 4 cleaning Rolls, 1600mm working width.
1x Truetzscschler Dust Remover
Type DUSTEX SP-DX, Year of manufacture 2007.
AB65/050124E/LY-Y/M/BG/
Schlafhorst X5 Autoconer
Quantity: 1, Year: 2014, Type X-5, 30 Spindles, Automatic feeding, Cleaner Uster Quantum 4, Conicity 4º 20.
AC29/180924/AS/
Volkmann Cabling & Superba TVP3 Heatset
AC29/180924E/ATY-AY/M/AS/
3x Volkmann Cabling
Year: 2017, 176 spindles.
AC29/180924E/LYI-YI/M/AS/
1x Superb TVP3
Year: 2017, 72 spindles, Suitable for pp and Polyester.
AF08/190924D/RO-O/F/
RPR Two For One Twisting Machine
Quantity: 3, Year: 2000
-2 sets with model of GC96DF, with heater, heater high of 500 mm.
-1 set with model of GC96D.
very good condition , equipped with invert device, spindles type of DT 140 mm, cops type, take up tube length of 230 mm, take up package of 3 Kg, each set with 120 spindles.
AA10/180924E/AAC-AI/F/
NSC Gill Box GC14
Quantity: 1, Year: 1994, with autoleveller, feeding creel 6 cans (3+3)
Linked to 1 ST.ELOI Press year 1993, for bumps dia. 400 mm, automatic knotting and ejection
AF08/180924/AH/
SSM Soft Dyeing Package
Quantity: 2, Year: 2004, Model of PW1-W, Each set with 60 spindles.
Machines were running until Sept 2024
total for 2 machines are 120 spindles.
There are air splicers that can be used for 30 spindles, it means if machines are purchased together, then total spindles are 120 (each machine 60) and customer can us air splicers for 30 spindles.
Ctrs requirement for 2 machines are 2×40′ High Cube
AD65/170924E/YR-R/F/AS/
Trutzschler TC03 Card
Quantity: 4, Year: 2007 (latest verison of TC 03 series), Can dia: 1000 x 1200 mm manuel can changer, Front side: 6 flat 12 carding segment, Back side: 3 falt 6 carding segment, 3 licker in., 1st pinned, 2nd wired, 3rd wired, Condition : Excellent. First class.
Note: They wrote that this comes with the machines, used value is Eur 5000 but comes at no charge, original trutzschler fan box free. It is for making suction more power.
AB08/160924E/AY.L-C/F/BJ/
Trutzschler DK760 Cards
Quantity: 3, Year: 1995, Type 760 – 22 – 11
Chute feed type: FBK 533, Can changer type: KH 600 , Type of coiler: KH 600
Waste collection: central to waste box, overhead extraction
No of licker in: , Flat type: Aluminium
Suction type: overhead extraction to filter
Can size: 24 inches (600 mm)
CAN CHANGER IS “ON FLOOR “ MOUNTED
AA10/120924/
WELLER Twister
Quantity: 1, Year +/- 1985, 2 x 84 spindles
ring dia. 120 mm, tube: 450 mm, 1 side is not complete, need to be checked
AA10/170924E/AYC-AC/F/
HDB Woolen Carding
Quantity: 1, Year: 1986, Type GALAXY
width 2.50 m, feeding device with Servolap, 1 Cylinder dia 1.20m, 1 Cylinder dia 1.50 m, Peralta, 1 Cylinder dia 1.50 m, 1 Cylinder dia 1.20, double rubbing belt, delivery with 128 yarns, Apron draft (64) width 19 mm. Machine can be loaded into 3 containers.
Payment : 25 % at the order 75 % before starting the dismantling.
Machine was used for typical carpet yarns, for example:
Depending on the material and operator , machine can produce
a blend of 70/30 wool / Nylon
70-100 mm 34-37 Micron
Capacity To produce Nm range 3,2 is 400-500 kg/7.5 hour.
If necessary there is also in the factory a good spinning frame HDB ring dia 127 mm.
Machine’s quality is good but not perfect (8 out of 10 rating of quality)
Ctrs requirements:
Carding: 3 Ctrs
Spinning (if customer wants to buy) : 2 Ctrs
Reason for selling: They stopped production
AF74/130924/
Schlafhorst Autocoro 288 Open End
Quantity: 5, Year: 1998, Spinbox: SE9, No of rotors: 288, Clearers: Corolab, Piecers: 2, Doffer: 1, Rotor diam.: 31mm, Openning roller: B174, Take up: SRK (4.20), Waxing: Available, Machines are dismantled.
AA02/170924D/ASI-CI/F/
Saurer Alma Ring Twisters
Quantity: 7, 144 Spindles/machine, Single Creel each machine, 6 ¾” Ring Inside Diameter, 7” outside diameter, Uses a 5 ¾” Diameter Bobbin, Bobbin capable of a 14” Traverse, Running 840 to 1260 denier nylon and polyester, Have run fibrillated polypropylene, 600 volts.
with: 40x TWISTING PIN TRUCKS, 72 Position w/ bobbins. 6 ¾ Center, (36) Pins per side . 3,024 FLANGED BOBBINS.
AA10/120924E/YL-L/M/
HDB Spinning Frame
Quantity: 1, Year: 1986, Type CBY 2, 192 spindles, Ring dia. 127 mm, Tube height: 600 mm.
AE56/110924/
Rieter D45 Draw Frame
Quantity: 3, Year: 2015, Can size 50*110 cm, With autoleveller, With automatic barrel change, Running condition.
AA02/110924/
Complete Ring Spinning Plant
Blowroom
1x Rieter Unifloc Bale Opener A11 Year 2015
1x Rieter Uniclean B1 Year 1995
3x Rieter UniMix B7/3 year 1995
3x Rieter Uniflex B50 Year 1997
1x Jossi Model AE.33-S Year 2002
1x Rieter Mini Mix B3/3R Year 1988
1x Rieter Uniflo Bale Opener A11 Year 2015
2x Rieter Unifloc bale opener A1/2 Year 1993
5x Rieter Separator A4.V4 Year 2015
1x Rieter Uniclean B12 Year 2015
1x Uster Jossi Diverter D21-370-01HP Year 2015
1x Rieter Unimix B75 Year 2015
1x Rieter Unistore A79 Year 2015
3x Uster Jossi EA-11-1 / EA-42-2/ EA50-2
1x Rieter Condenser A21 Year 2015
Carding
7x Rieter Cards C50 Year 1995
2x Rieter Cards C70 Year 2015
2x Rieter Cards C51H Year 2001
5x Rieter C60 cards 2007/2008
7x Truetzschler Cards DK903 Year 2003/2004
4x Truetzschler Cards DK760 Year 1995/1996
1x Truetzschler Card TC19i Year 2020
1x Rieter Control Panel Year 2015
Dustex
3x Tuetzschler De Duster DX Year 1995 ? 1990
Draw Frames
5x Rieter Breaker Draw Frames SB.951 Year 1995/1997/1998
4x Rieter Breaker Draw Frames SB-D22 Year 2014
1x Reiter Breaker Draw Frame SB D10 Year 2001
2x Rieter Finisher Draw Frames RSB D40 Year 2007
2x Rieter Finisher Draw Frames RSB D30 Year 2001/2002
1x Rieter Finisher Draw Frame RSB 951 Year 1995
4x Rieter Finisher Draw Frames RSB D45 Year 2015/2016
Combing
3x Rieter Lap winders E32 Year 2001/2013/2015
2x Rieter Combers E70R year 1998
4x Rieter Combers E72 Year 2001
4x Rieter Combers E809 Year 2013 / 2014
Roving
2x Electrojet ADR roving frames 144 spindles Year 2013/2018
2x Saurer Zinser Roving Frames FL670 120 spindles Year 2014
2x Saurer Zinser Roving Frames FL670 144 spindles Year 2017/2018
1x Rieter Roving frame F35 164 spindles Year 2012
Spinning
4x Saurer Zinser Ring Frames Model 351, 972 spindles 58mm ring dia, Year 2004
2x Saurer Zinser Ring Frame Model 350, 1104 spindles 51mm ring dia, Year 2003/2002
1x Saurer Zinser Ring Frames Model 351, 972 spindles 48mm ring dia, Year 2004
3x Saurer Zinser Ring Frames Model 351, 1056 spindles 58mm ring dia, Year 2007/2010
8x Saurer Zinser Ring Frames Model 351. 1680 spindles 48 mm ring dia, Year 2016/2017
2x Zinser Ring Frames Model 350, 972 spindles 54mm ring dia, Year 2001
Winders
1x Schlafhorst winder Model 338 30 positions Year 2004
1x Schlafhorst Saurer winder Model X5 28 positions Year 2015
1x Schlafhorst winder Model 338 24 positions Year 2004
1x Schlafhorst winder Model 338 504 positions Year 2004
2x Schlafhorst Saurer winders Model X5 60 positions Year 2015
1x Schlafhorst winder Model 338 60 positions Year 2014
4x Savio winders Model Polar 60 positions Year 2007/2013
2x Schlafhorst winder Model 338 50 positions Year 2014
Open End Spinning
1x Rieter Open End Frame Model R1, 280 rotors Year 1995
5x Rieter Open End Frame Model R 20, 280 rotors Year 1998
2x Rieter Open End Frame Model R20, 280 rotors Year 2000
1x Rieter Open End Frame Model R40, 280 rotors Year 2004
Laboratory
1x Mesdan Evenness tester Model 2341 Year 2016
1x Mesdan Tensolab Model 2514 Year 2016
1x Mesdan Regulator Model 2998 Year 2016
1x Mesdan Planofil Model 2520 Year 2016
1x Mesdan Twist Tester Model 2531C Year 2016
1x Mesdan Wrap Reel Model 161X Year 2016
1x Mesdan Wrap Reel Model 254A Year 2016
1x Mil-Terk Model BP509HD Year 20167
2x Uster Tester UT5 Year 2012
Twisters
2x Fadis Sincro Multipla Jet 410, 72 positions Year 20154/2017
AA25/270923E/ALY-AI/F/
SAHM Yarn Winding
Quantity: 1, Year: 2002, Type 411E, 40 heads, speed 200m/min, traverse 350mm
AF54/090924/BF/
Schlafhorst Open End SE12
Quantity: 1, Year: 2003, Place of Origin Germany, Model ACO 312, Number of Rotors pre 312Rotors / set, Rotor dia 78mm. Cheese Length 170mm. Opening Roller / B174 and S21DN. COROLAB quantum. Robots type T33. Type SRZ–Tube take up, Corobox SE12 for rotor speeds from 40,000 rpm to 150,000 rpm, Opening rollers: B174DN, rotor dia: 31mm, Rotor Type: G531BD, KN4 Navels, Electric yarn break detectors, Mechanical yarn slub clearers, Yarn cleaners: COROLAB 8, With 2 robots, Piecer type COROMAT with EIS Event Identification System, 1 Doffer on each side of machine for removal bobbins with complete yarn, With waxing device, With Informator, Conditions excellent.
AC86/080924/
Menegatto Pirn Winder
QUANTITY: 1, YEAR: 2005, TYPE HP, NUMBER 24 SPINDLES, SPINDLES TYPE M5, PERFECT CONDICTIONS.
AA10/040924/
SSM Winders
Quantity: 2, Year: 1997-1998, mod.DP1, 25 heads each, Take up 8″ cylindrical, countermeter eah head.
AA10/040924/
Lezzeni Double Twisters
Quantity: 1
Year: 1992
Double twisters TBRH/400 3 x 1
Feeding system positive drive
Machine with:
Feeding: 180 spindles, suitable for bobbin: run 260 mm., flange dia.110 mm.
Take up: 60 (30×2) spindles, gauge 400 mm., ring dia.165 mm., on flanged bottle : run 360 mm base flange dia.145 mm., top flange dia.105 mm.
1x LEZZENI pirn winder Mod. SLV, yoc 1992, 46 (23×2) spindles.
Can be used for spare :
1 LEZZENI Twister double twisters TBRH/400 modify in BR without top spindle yoc 1987, feeding system positive drive , Take up 60 (30×2) spindles, gauge 400 mm., feeding 3 ends , ring dia.165 mm., take up on flanged bottle : run.360 mm., base flange dia.145 mm., top flange dia.105 mm.
AE56/030924/AS/
Muratec Vortex 870lll
Quantity: 2, Year: 2018, 96 Rottor. 4 splaicer, 1 Doffer. Machine Running Viscose, All in running condition.
AA03/280824E/SC-O/M/
Gaudino Ring Spinning Frames
Quantity: 2, Year: 1990, 144 spindles, Pitch 165mm, Ring dia 127mm, Tubes 500 mm, With automatic cops doffer, condensor bobbin elevator, condensor bobbin transport system, automatic joining/connection of ends.
linked with: 1x Murata Winder
14 spindles 8″, tubes 3°30, length 230mm, splicer, Loepfe clearer TK 680, doffer, 380V/3Ph/50HZ
Still running, in good condition
AA02/270824/
Rieter Combing Unit
RIETER Omega Lap Winder
Quantity: 1, Year: 2021, Model E36, With 2 Transport trollies, Model E17, Each with 4 Lap positions
RIETER Combers
Quantity: 1, Year: 2021, Model E90, Automatic can delivery, 40 x 42 inch can size, Upward noil extraction
AB46/260824/AR/
Suessen Fiomax 2000 Spinning Frames
Quantity: 6, Year: 1998, 960 spindles, 75 mm gauge, 52 mm ring, 10 ¼” tube, Pinter roving stop, linked w/Savio Espero winder, 48 spindles, cone, air splice, Loepfe TK 840 Yarn Master clearers, wax, Electrojet OH cleaner.
AB46/260824/AR/
Suessen Fiomax BE -2 Spinning Frames
Quantity: 2, Year: 2000, 480 spindles, 75 mm gauge, 52 mm ring, 10 ¼” tube, Fani roving stop, linked w/Savio Espero winder, 28 spindles, cone, air splice, Loepfe TK 840 Yarn Master clearers, wax, Electrojet OH cleaner.
AA10/260824E/CC-Y/M/
Lema Cops Winder
Quantity: 1, Year: 1988-1989, mod.CLV-200, 92 spindles, Suitable for cops, Flanged bobbins and bottle, Reed tension, Computer LEMA LEZZENI.
AA10/230824E/RY.L-Y/F/AQ/
Rite Yarn Singeing
Quantity: 2
1x Year: 2004, Type: SUPER GA, 80 heads (40×2)
1x Year: 2001, Type: GRR, 80 heads (40×2)
Delivery 6″, 4°20. 1 container needs for each machine.
AE59/210824/AS/
Rieter Cotton Ring Spinning System Yarn Complete Mill 24,000 Spindles
Year:2003
Blow Room – 2003 year
1- Rieter Unifloc model A11, 2300 mm arm, 50 bale lay down per side
1- Rieter Waste Opener model B 2/5
1- Rieter Uniclean model B11
1- Rieter Unimix model B70
1- Rieter Uniflex model B60
1- Rieter Condensor model A20
1- Rieter Unimix model B70
1- Rieter Uniflex model B60
1- Rieter Condensor model A20
1- Jossi Vision Shield 2
Cards – 2003 year PIECES
18x Rieter C51 Cards with A70 chutes, with integrated grinding system, can diameter 1000mm, 100% cotton wire
Drawing 1. passage – 2003 year
4x Rieter SB-D15 draw frames, power creels, delivery can size 600mm
1x UNILAP E 32 , 2003 YEAR
1x UNILAP E 32 , 2008 YEAR
5x COMBER E 62 2003 YEAR
6x COMBER E 65 2008 YEAR
Drawing 2. passage – 2003 year
5x Rieter RSB-D35 draw frames, power creels, delivery can size 500mm
Roving / Ring spinning – 2003 year
6x Rieter/Marzoli F11 Roving Frames, 120 positions each, 6”x16” flyer, manual doff, Texparts 5035 drafting,Electrojet traveling overhead cleaners
20x Rieter Ring spinning machines, model G33, 1,200 positions each, 10- 38mm diameter ring,
10- 40mm diameter ring, 70mm gauge, Electrojet traveling overhead cleaners, main motor 55kw
Winders – 2003 year
8x Murata Winders model 21C, 60 positions, 5°57′ cone take up, length measuring, Loepfe TK 940F clearing
with foreign fiber detecting, G2 Z splicers, paraffin system, Luwa traveling overhead cleaner
AE59/210824/AS/
Rieter Cotton Ring Spinning System Yarn Complete Mill 24000 Spindles
Year: 2006
consisting of:
Blow Room
1- Rieter Unifloc model A11, 2300 mm arm, 90 bale lay down per side
1- Rieter Waste Opener model B 2/5
1- Rieter Uniclean model B11
1- Rieter Unimix model B70
1- Rieter Uniflex model B60
1- Rieter Condensor model A21
1- Jossi Vision Shield
1- Rieter Unimix model B70
1- Rieter Uniflex model B60
1- Rieter Condensor model A21
1- Jossi Vision Shield
Cards – 2006 year PIECES
15- Rieter C60 Cards integrated grinding system, can diameter 1000mm, 100% cotton wire
Drawing 1. passage – 2006 year
5- Rieter SB-D15 draw frames, delivery can size 1000mm
2 PCS UNILAP E 32 2006 YEAR
11 PCS COMBER E 65
Drawing 2. passage – 2006 year
6- Rieter RSB-D35 draw frames , delivery can size 600mm
Roving / Ring spinning – 2006 year
6- Rieter/Marzoli F15 Roving Frames, 144 positions each, 6”x16” flyer, manual doff, Texparts 5035 drafting,
Electrojet traveling overhead cleaners
10- Rieter Ring spinning machines, model G33, 1,200 positions each, 10- 40mm diameter ring,
10- Rieter Ring spinning machines, model k44, 1,200 positions each, 10- 38mm diameter ring, COMPACK
MODIFIED TO K 46 SYSTEM , SUCTION UNITS LINEAS ,
70mm gauge, Electrojet traveling overhead cleaners, main motor 55kw
Winders – 2006 year
20- Murata Winders model 21C, positions, 5°57′ cone take up, length measuring, Loepfe TK 940F clearing
with foreign fiber detecting, paraffin system, Luwa traveling overhead cleaner 560 spindles total LINK SYSTEM
AB46/210824/AR/
Cognetex FTCL Spinning Frames
Quantity: 6, Year: 1995, 928 spindles, 75 mm gauge, 55 mm ring, 11” tube, Pinter roving stop.
linked w/Savio Espero winder, 44 spindles, cone, air splice, Loepfe TK 750 clearers, wax, Electrojet OH cleaner.
AB82/190824/AN/
Savio Autoconer ORION LR
Quantity: 2 , Year: 2004
a) 1 winder with 30 heads, cone to cone, 24 knotter – 6 splicer
b) 1 winder with 24 heads, cone to cone, all knotter
With Loepfe clearer TK 840 and Yarn Master,
delivery 2 positions, auto-doffing, travelling cleaner
Type of knotter: First machine has normal knotting and 6 splicer – see in the pictures
For which counts doest it make knots : Nm 8 – Nm 100
AA02/200824D/COY-AI/M/
Saurer Allma Technocorder Twisters
Quantity: 2, Year: 2007, Model TCS.600.280, 104 Positions, 600 mm S[spindles Gauge, Spindle speed 2000 to 10,000 rpm, Delivery speed 30 to 350 meter per min, Take up Traverse 10 inches, Tube take up with random traverse, Max package diameter 350mm, Max full package weight 17kg, Supply Package 280mm diameter
Traverse 10 inches, Supply Package weight 12kg, S or Z twist directions, Twist Range 12 to 666 TpM, Count Ranges, (1) machine Disc 162mm : 235 to 3300 Dtex, (1) machine Disc 120mm : 940 to 6600 Dtex.
AA03/150824E/AA-R/F/
Elitex (lizense Volkmann) Two for One Twisters VTS-07-3
Quantity: 2, Year: 1990, Type VTS-07-3, General overhault in 2008, 132 spindles, 6” traverse, pot diameter 185 mm, Feeding: assembling bobbins 6-7”, tubes length until 205 mm, diameter until 175 mm, Delivery: conical and cylindrical tubes, length 170mm, 6” traverse, diameter until 350 mm, 2-3 kg, Automatic stop by yarn break, spindle speed 2.600-5.500 tpm, airthreading like Volcojet, Still running, good condition, motor 30kW, 380V3Ph/50HZ.
AA03/150824E/T-R/F/
Volkmann Two for One Sample Twister VTS-08
Quantity: 1, Year: 1984, Type VTS-08, Model 4.11, 12 spindles, pitch 205 mm, pot-ø 157 mm, feeding: assembling cones 6-7“, Delivery: 6“ con. tubes 4°20 or cylindric, diameter 280 mm max weight 3.200 gr. Volcojet-air threading, yarnbreak-control, automatic Lift of cones, by yarnbreak, Speed 12.000 tpm, very good condition, still in running position, 380V, 3 Ph/50 HZ.
AA02/140824/
Soft & Hard Package Winding / Yarn Dyeing & Drying
Soft & Hard Package Winding:
1x FADIS Soft Package winder
Model SINCRO / FC-RC Type P400, Year of manufacture 2008, 60 positions, Precision cross winding heads, Soft edge winding with tapering round edge.
2x SSM Precision Soft / Re-wind Cone Winder
Model TW2-Plus – W, Year of Manufacture 2014, 60 position, Precision individual winding heads, Electronic Fastflex yarn laying, Variable traverse, PLC control.
1x SSM Precision Soft / Re-wind Cone Winder
Model PW1-W/F, Year of Manufacture 2004, 60 position, Precision individual winding heads, Electronic Fastflex yarn laying, Variable traverse, PLC control.
1x TEPELER Yarn Rewinder
6 Position, Year of Manufacture unknown, 10 inch traverse, 3 deg 30 cone angle;.
2x CORGHI Cone Re Winder
Year of manufacture 2016, 36 Position single sided, Waxing, Grooved Traverse drum winding, 6 inch traverse, Cone Take up, 5 deg 57 cone angle, Manual doffing.
2x HWA CHINHG Cone Winder
Model 601, Year of Manufacture 2016, 72 Position single sided, Grooved Traverse drum winding, 6 inch traverse, Cone Take up, 5 deg 57 cone angle, Manual doffing.
Yarn Dyeing:
2x LORIS BELLINI Vertical Yarn Dyeing Kiers
Model INMSIEMS, Year of Manufacture 2007, 50 KG Capacity, With individual controller, 2 mixing tanks, 1 expansion tank, Pumps and motors.
1x TONG CHENG (Taiwan) Yarn Dyeing Kier
Model TCCH-150, Year of Manufacture 2010, 150 KG Capacity, With controller, 1 mixing tank / exchange tank, Pumps and motors.
1x TONG CHENG (Taiwan) Yarn Dyeing Kier
Model TCCH-300, Year of Manufacture 2012, 300 KG Capacity, With controller, 1 mixing tank / exchange tank, Pumps and motors.
1x TONG CHENG (Taiwan) Yarn Dyeing Kier
Model TCCH-500, Year of Manufacture 2012, 500 KG Capacity, With controller, 1 mixing tank / exchange tank, Pumps and motors.
1x TONG CHENG (Taiwan) Sample Yarn Dyeing Kier
Model TCCH-5, Year of Manufacture 2012, 5 KG Capacity, With controller, 1 mixing tank / exchange tank, Free Standing frame with Pump and motors.
Yarn Drying:
1x DETTIN Rotary Centrifugal Dryer
Model Berta 18 TE, Year of manufacture 2013, 18 cone packages each side, 108kg capacity, 1470 MAX Rev per min.
1x RF Systems (Italy) Radio Frequency Drier
Model TDWS85, Year of Manufacture 2013, Belt width 1600mm, 85 KW, Manual loading, Manual doffing.
AG52/140824D/AA-I.L/M/BS/
Electrojet DMT08503 Roving Frame Trasportation to Ring Spinning
Quantity:4, Year: 2000, Machines are dismantled in warehouse.
AA03/090824E/AO-R/F/
Pafa Ring Twister
Quantity: 1, for coarse counts until Nm 0,1 = Tex 10.0000 , 15 spindles, pitch 420mm, ring dia 300mm, flange bobbins 600mm, 380V/3Ph/50Hz.
AC86/090824/
Menegatto Covering Machines
QUANTITY: 1, YEAR 1999, MENEGATTO 1500, NUMBER 224 SPINDLES, FINAL BOBIN 170mm, SPINDLES TYPE M4, MOTOR 30 Kw, MECCANICAL DEVICE.
AC86/090824/BY/
Menegatto Covering
Quantity: 2, Year: 1995, Type 1500, Number 160 each, Spindles type: M5, MORE PIRN WINTER MEBEGATTOVHP TO 24 POSITIONS, With Rubber, Running Conditions.
AH68/060824E/LT-Y/M/BY/
SCHLUMBERGER HORIZONTAL RUBBING FRAME
QUANTITY: 1, YEAR: 1996, TYPE: FM 8 N, 20 SPINDLES, MANUAL DOFFING, PITCH 355 mm
2 ROVINGS per BOBBIN, INPUT 12 to 15 ktex according to material, ROIVING WEIGHT 0,66 – 5,5 Nm
DRAFT 9 to 26 by GEAR BOX, NSC DOUBLE APRON DRAFTING, DRAFT APRON 145 mm wide
RUBBING SPEED 1200 cycles / minute, NUMBER RUBS 5 to 8 per meter, BOBBIN 300 mm, DELIVERY SPEED up to 220 meters / minute
FITTET with :
NEW DRAFTING APRONS, NEW RUBBING APRONS, NEW FRONT AIR VALVES, NEW SLIVER GUIDES, NEW BARREL HOLDERS, loaded in 1 x 40` CONTAINER
AH68/060824E/LT-Y/M/BY/
SCHLUMBERGER HORZONTAL RUBBING FRAME
QUANTITY: 1, YEAR: 1997, TYPE FM 8 N , 20 SPINDLES, MANUAL DOFFING
INPUT 12 to 15 ktex according to the material, ROVING WEIGHT 0,66 – 5.5 Nm, DRAFT 9 to 26 by GEAR BOX
NSC DOUBLE APRON DRAFTING, DRAFT APRON 145 mm wide, RUBBING SPEED 1200 cycles / minute
NUMBER RUBS 5 to 8 per meter, BOBBIN 300 mm
DELIVERY SPEED up to 220 meters / minute FITTED with .
NEW DRAFTING APRONS, NEW RUBBING APRONS, NEW FRONT AIR VALVES, NEW SLIVER GUIDES, NEW BARREL HOLDERS
INCLUDING :1500 ROVVING BARRELS
loaded in 1 x 40` Container.in a warehouse.
AB46/050824/
Rieter RSB 951 Finisher Drawing
Quantity: 8, Year: 1995, Make : Rieter, Model : RSB 951, Sliver Monitor With
Delivery Can Dia : 20″, Can Changer : Auto, Creel Type: Power Creel
Feed Can Dia : 40″, Drafting Type : 3 Over 3, Suction : Centralize, With Autoleveller